HDSP Series
14.2 mm (0.56 inch)
Seven Segment Displays
Data Sheet
Description
The 14.2 mm (0.56 inch) LED seven segment displays are
designed for viewing distances up to 7 metres (23 feet).
These devices use an industry standard size package and
pinout. Both the numeric and ±1 overflow devices feature a
right hand decimal point. All devices are available as either
common anode or common cathode.
These displays are ideal for most applications. Pin for pin
IFAVG DATA SHEET = 10 mA
KPeak = 1.3
IV DATA SHEET = 2800 Pcd
Therefore
IvAVG = (10 mA/10 mA)
(1.3)(2800 Pcd)
= 3640 Pcd
Orange AlGaAs Red HER Yellow Green Package
HDSP- HDSP-[1] HDSP-[1] HDSP- HDSP- Description Drawing
H401 H151 5501 5701 5601 Common Anode Right Hand Decimal A
H403 H153 5503 5703 5603 Common Cathode Right Hand Decimal B
H157 5507 5707 5607 Common Anode ±1. Overflow C
H158 5508 5708 5608 Common Cathode ±1. Overflow D
K401 5521 5721 5621 Two Digit Common Anode Right Hand Decimal E
K403 5523 5723 5623 Two Digit Common Cathode Right Hand Decimal F
Devices
Note:
1. These displays are recommended for high ambient light operation. Please refer to the HDSP-H10X/K12X AlGaAs and HDSP-555X HER data sheet
for low current operation.
HDSP-K40x, HDSP-550x, HDSP-552x, HDSP-560x,
HDSP-562x, HDSP-570x, HDSP-572x, HDSP-H15x,
HDSP-H40x Series
Features
x Industry Standard Size
x Industry Standard Pinout
15.24 mm (0.6 in.) DIP Leads on 2.54 mm (0.1 in.) Cen-
ters
x Choice of Colors
AlGaAs Red, High Efficiency Red, Yellow, Green, Orange
x Excellent Appearance
Evenly Lighted Segments
Mitered Corners on Segments
Gray Package Gives Optimum Contrast
±50° Viewing Angle
x Design Flexibility
Common Anode or Common Cathode
Single and Dual Digits
Right Hand Decimal Point
±1. Overflow Character
x Categorized for Luminous Intensity
Yellow and Green Categorized for Color
Use of Like Categories Yields a Uniform Display
x High Light Output
x High Peak Current
x Excellent for Long Digit String Multiplexing
x Intensity and Color Selection Option
See Intensity and Color Selected Displays Data Sheet
x Sunlight Viewable AlGaAs
2
Contrast Enhancement
The objective of contrast enhancement is to provide good
display readability in the end use ambient light. The con-
cept is to employ both luminance and chrominance con-
trast techniques to enhance the readability. This is accom-
plished by having the OFF dots blend into the display
background and the ON dots stand out vividly against this
same background. Therefore, these display devices are as-
sembled with a gray package and matching encapsulat-
ing epoxy in the dots.
Contrast enhancement may be achieved by using one of
the following suggested filters:
Standard Red and AlGaAs Red (HDSP-5300/H150)
Panelgraphic RUBY RED 60
SGL-Homalite H100-1605 RED
3M Louvered Filter R6610 RED or N0210 GRAY
HER (HDSP-5500)
Panelgraphic SCARLET RED 60
SGL-Homalite H100-1670 RED or H100-1250 GRAY
3M Louvered Filter R6610 RED or N0210 GRAY
Yellow (HDSP-5700)
Panelgraphic YELLOW 27 or GRAY 10
SGL-Homalite H100-1720 AMBER or H100-1250 GRAY
3M Louvered Filter A5910 AMBER or N0210 GRAY
Green (HDSP-5600)
Panelgraphic GREEN 48
SGL-Homalite H100-1440 GREEN or H100-1250 GRAY
3M Louvered Filter YG6610 RED or N0210 GRAY
For further information on contrast enhancement please
see Application Note 1015.
Mechanical
Specially developed plastics are used to optimize the
displays optical performance. These plastics restrict the
solvents that may be used for cleaning. Only mixtures of
Freon (F113) and alcohol should be used for vapor clean-
ing processes. Total immersion time in the vapors is two
minutes. Some suggested mixtures are Freon TE, Arklone
A or K, or Genesolv DI-15 or DE-15. A 60°C (140°F) water
cleaning process may also be used. This process includes
a neutralizer rinse (3% ammonia solution or equivalent),
a surfactant rinse (1% detergent solution or equivalent),
a water rinse, and a thorough air dry. Room temperature
cleaning may be done with Freon T-E35 or T-P35, Ethanol,
Isopropanol, or water with a mild detergent.
Cleaning agents from the ketone family (acetone, methyl
ethyl ketone, etc.) and from the chlorinated hydrocarbon
family (methylene chloride, trichloro ethylene, carbon tet-
rachloride, etc.) are not recommended for cleaning LED
parts. All of these various solvents attack or dissolve the
encapsulating epoxies used to form the package of plastic
LED parts.
3
These displays are ideal for most applications. Pin for pin
equivalent displays are also available in a low current design.
The low current displays are ideal for portable applica tions.
For additional information see the Low Current Seven Seg-
ment Displays data sheet.
Part Numbering System
Notes:
1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Avago rep-
resentative for details.
2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1 bin per
tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information.
5082 -X XX X-X X X XX
HDSP-X XX X-X X X XX
Mechanical Options[1]
00: No Mechanical Option
Color Bin Options[1,2]
0: No Color Bin Limitation
Maximum Intensity Bin[1,2]
0: No Maximum Intensity Bin Limitation
Minimum Intensity Bin[1,2]
0: No Minimum Intensity Bin Limitation
Device Configuration/Color[1]
1: Common Anode
3: Common Cathode
Device Specific Configuration[1]
Refer to Respective Datasheet
Package[1]
H: 14.2 mm (0.56 inch) Single Digit Seven Segment Display
4
FUNCTION
PIN A B C D E F
1 CATHODE e ANODE e CATHODE c ANODE c E CATHODE NO. 1 E ANODE NO. 1
2 CATHODE d ANODE d ANODE c, d CATHODE c, d D CATHODE NO. 1 D ANODE NO. 1
3 ANODE[3] CATHODE[4] CATHODE b ANODE b C CATHODE NO. 1 C ANODE NO. 1
4 CATHODE c ANODE c ANODE a, b, DP CATHODE a, b, DP DP CATHODE NO. 1 DP ANODE NO. 1
5 CATHODE DP ANODE DP CATHOPDE DP ANODE DE E CATHODE NO. 2 E ANODE NO. 2
6 CATHODE b ANODE b CATHODE a ANODE a D CATHODE NO. 2 D ANODE NO. 2
7 CATHODE a ANODE a ANODE a, b, DP CATHODE a, b, DP G CATHODE NO. 2 G ANODE NO. 2
8 ANODE[3] CATHODE[4] ANODE c, d CATHODE c, d C CATHODE NO. 2 C ANODE NO. 2
9 CATHODE f ANODE f CATHODE d ANODE d DP CATHODE NO. 2 DP ANODE NO. 2
10 CATHODE g ANODE g NO PIN NO PIN B CATHODE NO. 2 B ANODE NO. 2
11 A CATHODE NO. 2 A ANODE NO. 2
12 F CATHODE NO. 2 F ANODE NO. 2
13 DIGIT NO. 2 ANODE DIGIT NO. 2 CATHODE
14 DIGIT NO. 1 ANODE DIGIT NO. 1 CATHODE
15 B CATHODE NO. 1 B ANODE NO. 1
16 A CATHODE NO. 1 A ANODE NO. 1
17 G CATHODE NO. 1 G ANODE NO. 1
18 F CATHODE NO. 1 F ANODE NO. 1
NOTES:
1. ALL DIMENSIONS IN MILLIMETRES (INCHES).
2. ALL UNTOLERANCED DIMENSIONS ARE FOR REFERENCE ONLY.
3. REDUNDANT ANODES.
4. REDUNDANT CATHODES.
5. FOR HDSP-5600/-5700 SERIES PRODUCT ONLY.
Package Dimensions
5
Internal Circuit Diagram
Notes:
1. See Figure 2 to establish pulsed conditions.
2. Derate above 46°C at 0.54 mA/°C.
3. See Figure 7 to establish pulsed conditions.
4. Derate above 53°C at 0.45 mA/°C.
5. See Figure 8 to establish pulsed conditions.
6. Derate above 81°C at 0.52 mA/°C.
Absolute Maximum Ratings
7. See Figure 9 to establish pulsed conditions.
8. Derate above 39°C at 0.37 mA/°C.
9. For operation below -20°C, contact your local Avago
components sales office or an authorized distributor.
HER/Orange
HDSP-5500
AlGaAs Red HDSP-H40x Yellow Green
HDSP-H150 HDSP-K40x HDSP-5700 HDSP-5600
Description Series Series Series Series Units
Average Power per Segment or DP 96 105 80 105 mW
Peak Forward Current per 160[1] 90[3] 60[5] 90[7] mA
Segment or DP
DC Forward Current per Segment or DP 40[2] 30[4] 20[6] 3018] mA
Operating Temperature Range -20 to +100[9] -40 to +100 °C
Storage Temperature Range -55 to +100 °C
Reverse Voltage per Segment or DP 3.0 V
Wavesoldering Temperature for 3 Seconds 250 °C
(1.60 mm [0.063 in.] below body)
6
Electrical/Optical Characteristics at TA = 25°C
AlGaAs Red
High Efficiency Red
Device
Series
HDSP- Parameter Symbol Min. Typ. Max. Units Test Conditions
Luminous Intensity/Segment[1,2,5] I
V 9.1 16.0 mcd IF = 20 mA
(Digit Average)
1.8 IF = 20 mA
Forward Voltage/Segment or DP VF V
2.0 3.0 IF = 100 mA
H15X
Peak Wavelength OPEAK 645 nm
Dominant Wavelength[3] Od 637 nm
Reverse Voltage/Segment or DP[4] V
R 3.0 15 V IR = 100 μA
Temperature Coefficient of ∆VF/°C -2 mV/°C
V
F/Segment or DP
Thermal Resistance LED Junction- RTJ-Pin 400 °C/W/
to-Pin Seg
Device
Series
HDSP- Parameter Symbol Min. Typ. Max. Units Test Conditions
900 2800 IF = 10 mA
Luminous Intensity/Segment[1,2,6] I
V μcd
(Digit Average) 3700 IF = 60 mA Peak:
1 of 6 df
Forward Voltage/Segment or DP VF 2.1 2.5 V IF = 20 mA
55XX
Peak Wavelength OPEAK 635 nm
Dominant Wavelength[3] Od 626 nm
Reverse Voltage/Segment or DP[4] V
R 3.0 30 V IR = 100 μA
Temperature Coefficient of ∆VF/°C -2 mV/°C
V
F/Segment or DP
Thermal Resistance LED Junction- RTJ-Pin 345 °C/W/
to-Pin Seg
7
Yellow
Orange
Device
Series
HDSP- Parameter Symbol Min. Typ. Max. Units Test Conditions
600 1800 IF = 10 mA
Luminous Intensity/Segment[1,2] I
V μcd
(Digit Average) 2750 IF = 60 mA Peak:
1 of 6 df
Forward Voltage/Segment or DP VF 2.1 2.5 V IF = 20 mA
57XX
Peak Wavelength OPEAK 583 nm
Dominant Wavelength[3,7] Od 581.5 586 592.5 nm
Reverse Voltage/Segment or DP[4] V
R 3.0 40 V IR = 100 μA
Temperature Coefficient of ∆VF/°C -2 mV/°C
V
F/Segment or DP
Thermal Resistance LED Junction- RTJ-Pin 345 °C/W/
to-Pin Seg
Device
Series
HDSP- Parameter Symbol Min. Typ. Max. Units Test Conditions
Luminous Intensity/Segment IV 2.37 mcd IF = 10 mA
(Segment Average)[1,2]
Forward Voltage/Segment or DP VF 2.1 2.5 V IF = 20 mA
Peak Wavelength OPEAK 600 nm
H40x Dominant Wavelength[3] Od 603 nm IF = 10 mA
K40x Reverse Voltage/Segment or DP[4] V
R 3.0 30 V IR = 100 μA
Temperature Coefficient of ∆VF/°C -2 mV/°C
V
F/Segment or DP
Thermal Resistance LED Junction- RTJ-Pin 345 °C/W/
to-Pin Seg
8
High Performance Green
Notes:
1. Device case temperature is 25°C prior to the intensity measurement.
2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
3. The dominant wavelength, Od, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device.
4. Typical specification for reference only. Do not exceed absolute maximum ratings.
5. For low current operation, the AlGaAs HDSP-H10X series displays are recommended. They are tested at 1 mA dc/segment and are pin for pin
compatible with the HDSP-H15X series.
6. For low current operation, the HER HDSP-555X series displays are recommended. They are tested at 2 mA dc/segment and are pin for pin com-
patible with the HDSP-550X series.
7. The Yellow (HDSP-5700) and Green (HDSP-5600) displays are categorized for dominant wavelength. The category is designated by a number
adjacent to the luminous intensity category letter.
AlGaAs Red
Figure 2. Maximum Tolerable Peak Current vs. Pulse Duration
– AlGaAs Red.
Figure 1. Maximum Tolerable Peak Current vs. Pulse Duration – Red.
Device
Series
HDSP- Parameter Symbol Min. Typ. Max. Units Test Conditions
900 2500 IF = 10 mA
Luminous Intensity/Segment[1,2] I
V μcd
(Digit Average)` 3100 IF = 60 mA Peak:
1 of 6 df
Forward Voltage/Segment or DP VF 2.1 2.5 V IF = 10 mA
56XX
Peak Wavelength OPEAK 566 nm
Dominant Wavelength[3,7] Od 571 577 nm
Reverse Voltage/Segment or DP[4] V
R 3.0 50 V IR = 100 μA
Temperature Coefficient of ∆VF/°C -2 mV/°C
V
F/Segment or DP
Thermal Resistance LED Junction- RTJ-Pin 345 °C/W/
to-Pin Seg
9
Figure 3. Maximum Allowable DC Current vs. Ambient Temperature. Figure 4. Forward Current vs. Forward Voltage.
HER, Yellow, Green, Orange
Figure 7. Maximum Tolerable Peak Current vs. Pulse Duration – HER,
Orange.
Figure 8. Maximum Tolerable Peak Current vs. Pulse Duration
– Yellow.
Figure 5. Relative Luminous Intensity vs. DC Forward Current. Figure 6. Relative Efficiency (Luminous Intensity per Unit Current)
vs. Peak Current.
IDC MAX. – MAXIMUM DC CURRENT PER SEGMENT – mA
20
0
TA – AMBIENT TEMPERATURE – C
30 90 120
50
30
7050
AlGaAs RED
10
20
5
15
25
35
40 60 80 100 110
40
45
RθJ-A = 770 C/W
IF – FORWARD CURRENT PER SEGMENT – mA
0
0
VF – FORWARD VOLTAGE – V
160
100
60
2.0 4.0
80
20
1.0 3.0
40
AlGaAs RED
0.5 1.5 2.5 3.5
120
140
RELATIVE LUMINOUS INTENSITY
(NORMALIZED TO 1 AT 20 mA)
0
0
IF – FORWARD CURRENT PER SEGMENT – mA
2.00
1.50
1.25
0.75
0.25
20 40
1.75
1.00
0.50
10 30
5152535
AlGaAs RED
ηPEAK – NORMALIZED RELATIVE EFFICIENCY
0.5
0.6
IPEAK – PEAK FORWARD CURRENT
PER SEGMENT – mA
50.0 150.0
1.4
0.8
5.0
1.0
1.2
AlGaAs RED
Figure 11. Forward Current vs. Forward
Voltage.
Figure 9. Maximum Tolerable Peak Current vs.
Pulse Duration – Green.
Figure 10. Maximum Allowable DC Current vs. Ambient
Temperature.
Figure 12. Relative Luminous Intensity vs. DC
Forward Current.
Figure 13. Relative Efficiency (Luminous
Intensity per Unit Current) vs. Peak Current.
Electrical/Optical
For more information on electrical/optical characteristics,
please see Application Note 1005.
Contrast Enhancement
For information on contrast enhancement please see Ap-
plication Note 1015.
Soldering/Cleaning
Cleaning agents from the ketone family (acetone, methyl
ethyl ketone, etc.) and from the chlorinated hydrocarbon
family (methylene chloride, trichloro–ethylene, carbon
tetrachloride, etc.) are not recommended for cleaning LED
parts. All of these various solvents attack or dissolve the
encapsulating epoxies used to form the package of plastic
LED parts.
For information on soldering LEDs please refer to Ap-
plication Note 1027.
IF – FORWARD CURRENT PER SEGMENT – mA
1
0
VF – FORWARD VOLTAGE – V
90
70
60
30
10
35
80
50
20
24
40
HER SERIES,
ORANGE
SERIES
GREEN SERIES
YELLOW SERIES
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 10 mA)
0
0
IF – DC FORWARD CURRENT – mA
4.0
3.0
2.5
1.5
0.5
20 40
3.5
2.0
1.0
10 30
5152535
HER, YELLOW,
GREEN, ORANGE
hV – RELATIVE EFFICIENCY
(NORMALIZED TO 1 AT 10 mA PER SEGMENT)
0
0.6
IPEAK – PEAK FORWARD CURRENT
PER SEGMENT mA
9020 70 80 10
0
1.6
1.4
1.3
1.1
0.9
0.8
6050403010
HER SERIES,
ORANGE SERIES
GREEN SERIES
0.7
1.0
1.2
1.5
YELLOW SERIES
HDSP-H15x
IV Bin Category Min. Max.
K 9.20 16.90
L 13.80 25.30
M 20.70 38.00
N 31.10 56.90
O 46.60 85.40
Intensity Bin Limits (mcd)
AlGaAs Red
HDSP-550x/552x
IV Bin Category Min. Max.
E 0.91 1.67
F 1.37 2.51
G 2.05 3.76
H 3.08 5.64
I 4.62 8.64
J 6.93 12.70
K 10.39 19.04
HER
HDSP-570x/572x
IV Bin Category Min. Max.
D 0.61 1.11
E 0.91 1.67
F 1.37 2.51
G 2.05 3.76
H 3.08 5.64
I 4.62 8.64
J 6.93 12.70
K 10.39 19.04
Yellow
HDSP-560x/562x
IV Bin Category Min. Max.
E 0.91 1.67
F 1.37 2.51
G 2.05 3.76
H 3.08 5.64
I 4.61 8.46
Green
Dominant Wavelength (nm)
Color Bin Min. Max.
Yellow 1 581.50 585.00
3 584.00 587.50
2 586.50 590.00
4 589.00 592.50
Green 2 573.00 577.00
3 570.00 574.00
4 567.00 571.00
5 564.00 568.00
Color Categories
Note:
All categories are established for classification of products. Products
may not be available in all categories. Please contact your Avago repre-
sentatives for further clarification/information.
HDSP-H40x/K40x
IV Bin Category Min. Max.
B 0.77 1.17
C 0.95 1.45
D 1.19 1.82
E 1.49 2.27
F 1.85 2.89
G 2.32 3.54
H 2.90 4.43
Orange
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2010 Avago Technologies. All rights reserved. Obsoletes 5988-4273EN
AV02-1107EN - January 15, 2010