• Edition (i): • 08.11.2010
Hans Turck GmbH & Co.KG • D-45472 Mülheim an der Ruhr • Witzlebenstraße 7 • Tel. 0208 4952-0 • Fax 0208 4952-264 • more@turck.com • www.turck.com 1/3
• Edition (i):
Hans Turck GmbH & Co.KG • D-45472 Mülheim an der Ruhr • Witzlebenstraße 7 • Tel. 0208 4 952-0 • Fax 0208 4952-264 • more@turck.com • www.turck .com
Inductive sensor
Bi1,5-G08-AN7X
●Threaded barrel, M8 x 1
●Stainless steel, 1.4404
●3-wire DC, 10…30 VDC
●normally open npn output
●TTL compatible
●cable connection
Wiring diagram
Functional principle
Inductive sensors detect metal objects
contactless and wear-free. For this purpose
they use a high-frequency electromagnetic
AC field that interacts with the target. The
sensors hosting a ferrite core coil generate
the AC field through an LC resonant circuit.
BN
BU
BK
+
npn
Type Bi1,5-G08-AN7X
Ident-No. 4701125
Rated operating distance Sn 1.5 mm
Mounting condition flush
Assured sensing range ≤ (0,81 x Sn) mm
Correction factors St37 = 1, V2A ~ 0.7, Ms ~ 0.4, Al ~ 0.3
Repeatability ≤ 2 %
Temperature drift ≤ ± 10 %
Hysteresis 3… 15 %
Ambient temperature -25…+ 70 °C
Operating voltage 10… 30 VDC
Residual ripple ≤ 10 % Uss
DC rated operational current ≤ 150 mA
No-load current I0≤ 10 mA
Residual current ≤ 0.1 mA
Rated insulation voltage ≤ 0.5 kV
Short-circuit protection no
Voltage drop at Ie≤ 0.7 V
Wire breakage / Reverse polarity protection yes / yes (voltage supply)
Output function 3-wire, NO contact, NPN
Switching frequency ≤ 3kHz
Housing threaded barrel, M8 x 1
Dimensions 56.6 mm
Housing material Metal, V2A (1.4301)
Material active face Plastic, plastic, PA12-GF20
End cap Plastic, PP
Tightening torque of housing nut 10 Nm
Electrical connection cables
Cable quality Ø 4, LifYY-11Y, PUR, 2 m
Cable cross section: 3 x 0.25mm2
Vibration resistance 55 Hz (1 mm)
Shock resistance 30g (11 ms)
Protection class IP67
Switching state LED yellow
13/4
LED
M8 x 1
55
1,6
• Edition (i): • 08.11.2010
Hans Turck GmbH & Co.KG • D-45472 Mülheim an der Ruhr • Witzlebenstraße 7 • Tel. 0208 4952-0 • Fax 0208 4952-264 • more@turck.com • www.turck.com 2/3
• Edition (i):
Hans Turck GmbH & Co.KG • D-45472 Mülheim an der Ruhr • Witzlebenstraße 7 • T el. 0208 4952-0 • Fax 0208 4952-264 • more@turck.com • www.turck. com
Inductive sensor
Bi1,5-G08-AN7X
Mounting instructions minimum distances
Distance D 2 x B
Distance W 3 x Sn
Distance T 3 x B
Distance S 1.5 x B
Distance G 6 x Sn
Diameter of the active area B Ø 8 mm
W
G
D
S
T
• Edition (i): • 08.11.2010
Hans Turck GmbH & Co.KG • D-45472 Mülheim an der Ruhr • Witzlebenstraße 7 • Tel. 0208 4952-0 • Fax 0208 4952-264 • more@turck.com • www.turck.com 3/3
Accessories
• Edition (i):
Hans Turck GmbH & Co.KG • D-45472 Mülheim an der Ruhr • Witzlebenstraße 7 • T el. 0208 4952-0 • Fax 0208 4952-264 • more@turck.com • www.turck. com
Inductive sensor
Bi1,5-G08-AN7X
Type code Ident-No. Short text Dimension drawing
BST-08B 6947210 Fixing clamp with dead-stop; material: PA6
MW-08 6945008 Mounting bracket; material: Stainless steel A2 1.4301
(AISI 304)
BSS-08 6901322 Fixing clamp; material: Polypropylene
ø 8
16
20
M3
7,4
12
4
25,4
28,7
7,9
9,5
31,8
5,5
8,7
7,9
15,9 11,9
1,8 7,1
ø 8
26,5
30
34
5
20
