74LVC2G08 DUAL 2-INPUT AND GATE Description Pin Assignments The 74LVC2G08 is a dual, two input AND gate. Both gates have push-pull outputs designed for operation over a power supply range of 1.65V to 5.5V. The device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output, (Top View) 1A 1 8 VCC 1B 2 7 1Y 2Y 3 6 2B GND 4 5 2A NEW PRODUCT preventing damaging current backflow when the device is powered down. Each gate performs the positive Boolean function: Y A B or Y A B X2-DFN2010-8 X2-DFN1410-8 X2-DFN1210-8 Features Applications Wide Supply Voltage Range from 1.65 to 5.5V 24mA Output Drive at 3.3V CMOS low power consumption IOFF Supports Partial-Power-Down Mode Operation Inputs accept up to 5.5V Schmitt Trigger Action at all inputs makes the circuit tolerant for slower input rise and fall times. The hysteresis is typically 100mV at VCC = 3.0V. ESD Protection Exceeds JESD 22 2000-V Human Body Model (A114) Exceeds 1000-V Charged Device Model (C101) Latch-Up Exceeds 100mA per JESD 78, Class I Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. "Green" Device (Note 3) Notes: Voltage Level Shifting General Purpose Logic Power Down Signal Isolation Wide Array of Products Such as: PCs, Networking, Notebooks, Netbooks, PDAs Tablet Computers, E-readers Computer Peripherals, Hard Drives, CD/DVD ROMs TVs, DVDs, DVRs, Set Top Boxes Cell Phones, Personal Navigation / GPS MP3 Players, Cameras, Video Recorders 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated's definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green" products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 74LVC2G08 Document number: DS37928 Rev 1 - 2 1 of 11 www.diodes.com June 2016 (c) Diodes Incorporated 74LVC2G08 Ordering Information (Note 4) 74LVC2G Logic Device NEW PRODUCT XXX Function 74 : Logic Prefix LVC : 1.65V to 5.5V Logic Family 2G : Dual Gate 08 : Package (Note 5) 74LVC2G08HD4-7 HD4 X2-DFN2010-8 74LVC2G08HK3-7 HK3 X2-DFN1410-8 74LVC2G08RA3-7 RA3 X2-DFN1210-8 -7 Package 2-Input AND Gate Package Code Device Notes: 08 HD4 : X2-DFN2010-8 HK3 : X2-DFN1410-8 RA3 : X2-DFN1210-8 Package Size 1.95mm x 1.0mm x 0.4mm 0.5 mm lead pitch 1.35mm x 1.0mm x 0.35mm 0.4 mm lead pitch 1.2mm x 1.0mm x 0.35mm 0.3 mm lead pitch Packing -7 : 7" Tape & Reel 7" Tape and Reel (Note 6) Quantity Part Number Suffix 5,000/Tape & Reel -7 5,000/Tape & Reel -7 5,000/Tape & Reel -7 4. For packaging details, go to our website at http://www.diodes.com/products/packages.html. 5. Pad layout as shown in Diodes Incorporated's package outline PDFs, which can be found on our website at http://www.diodes.com/packageoutlines.html. 6. The taping orientation is located on our website at http://www.diodes.com/datasheets/ap02007.pdf. Pin Descriptions Pin Name Pin No. 1A 1 Data Input Description 1B 2 Data Input 2Y 3 Data Output GND 4 Ground 2A 5 Data Input 2B 6 Data Input 1Y 7 Data Output VCC 8 Supply Voltage Logic Diagram 1 1A 2 1B 5 2A 6 2B 1Y 7 2Y 3 Function Table Inputs Output A B Y L L L L L H H L L H H H 74LVC2G08 Document number: DS37928 Rev 1 - 2 2 of 11 www.diodes.com June 2016 (c) Diodes Incorporated 74LVC2G08 Absolute Maximum Ratings (Notes 7 & 8) Symbol Description ESD HBM Human Body Model ESD Protection ESD CDM Charged Device Model ESD Protection VCC VI 2 kV 1 kV -0.5 to +6.5 V Input Voltage -0.5 to +6.5 V -0.5 to VCC +0.5 V -0.5 to +6.5 V Output Voltage Power Down Mode NEW PRODUCT Unit Supply Voltage Output Voltage -Active Mode VO Rating IIK Input Clamp Current VI<0 -50 mA IOK Output Clamp Current (VO < 0 OR VO > Vcc ) 50 mA IO Continuous Output Current (VO = 0 to VCC) 50 mA ICC Continuous Current Through VCC 100 mA IGND Continuous Current Through GND -100 mA Operating Junction Temperature -40 to +150 C Storage Temperature -65 to +150 C TJ TSTG Notes: 7. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should be within recommend values. 8. Forcing the maximum allowed voltage could cause a condition exceeding the maximum current or conversely forcing the maximum current could cause a condition exceeding the maximum voltage. The ratings of both current and voltage must be maintained within the controlled range. Recommended Operating Conditions (Note 9) Symbol Parameter Operating VCC VI VO IOH IOL Operating Voltage Data Retention Only 1.65 5.5 1.5 -- 0 5.5 0 VCC Output Voltage Power-Down Mode 0 5.5 VCC = 1.65V -- -4 VCC = 2.3V -- -8 VCC = 2.7V -- -12 VCC = 3.0V -- -- -16 -24 VCC = 4.5V -- -32 VCC = 1.65V -- 4 VCC = 2.3V -- 8 VCC = 2.7V -- 12 -- 16 -- 24 VCC = 4.5V -- 32 VCC = 1.65V to 2.7V -- 20 VCC = 2.7V to 5.5V -- 10 -40 +125 High-Level Output Current Low-Level Output Current Input Transition Rise or Fall Rate Operating Free-Air Temperature Unit V Output Voltage Active Mode TA Note: Max Input Voltage VCC = 3.0V t/V Min V V mA mA ns/V C 9. Unused inputs should be held at VCC or Ground. 74LVC2G08 Document number: DS37928 Rev 1 - 2 3 of 11 www.diodes.com June 2016 (c) Diodes Incorporated 74LVC2G08 Electrical Characteristics Symbol NEW PRODUCT VIH VIL Parameter (All typical values are at TA = +25C) Test Conditions High-Level Input Voltage -- Low-Level Input Voltage -- VOH Low-Level Output Voltage VCC = 1.65V to 1.95V 0.65 x VCC -- -- 0.65 x VCC -- VCC = 2.3V to 2.7V 1.7 -- -- 1.7 -- VCC = 2.7V to 3.6V 2.0 -- -- 2.0 -- VCC = 4.5V to 5.5V 0.7 x VCC -- -- 0.7 x VCC -- VCC = 1.65V to 1.95V -- -- 0.35 x VCC -- 0.35 x VCC VCC = 2.3V to 2.7V -- -- 0.7 -- 0.7 VCC = 2.7V to 3.6V -- -- 0.8 -- 0.8 -- 0.3 x VCC -- 0.3 x VCC -- VCC - 0.1 -- IOH = -4mA 1.65V 1.2 1.53 -- 0.95 -- IOH = -8mA 2.3V 1.9 2.13 -- 1.7 -- IOH = -12mA 2.7 2.2 2.5 -- 1.9 -- 2.4 2.7 -- 2.2 -- 2.3 2.6 -- 2.0 -- IOH = -16mA 3V Unit V V V IOH = -32mA 4.5V 3.8 4.1 -- 3.4 -- IOL = 100A 1.65V to 5.5V -- 0 0.1 -- 0.1 IOL = 4mA 1.65V -- 0.08 0.45 -- 0.7 IOL = 8mA 2.3V -- 0.14 0.3 -- 0.45 IOL = 12mA 2.7V -- 0.19 0.4 -- 0.6 -- 0.25 0.4 -- 0.6 -- 0.37 0.55 -- 0.8 4.5V -- 0.43 0.55 -- 0.8 0V to 5.5V -- 0.1 5 -- 20 A 0V -- 0.1 10 -- 20 A 1.65V to 5.5V -- 0.1 10 -- 40 A 2.3V to 5.5V -- 5 500 -- 5,000 A 3.3V -- 2.5 -- -- -- pF IOL = 16mA Input Current VI = 5.5V or GND IOFF Power Down Leakage Current VI or VO = 5.5V ICC Supply Current VI = 5.5V or GND IO=0A Input Capacitance Max Vcc II CI Min -- IOL = 32mA ICC Max VCC - 0.1 IOL = 24mA Additional Supply Current Typ. 1.65V to 5.5V IOH = -24mA VOL -40C to +125C Min VCC = 4.5V to 5.5V IOH = -100A High-Level Output Voltage -40C to +85C VCC One input at VCC - 0.6V Other inputs at VCC 3V V or GND VI = VCC or GND 74LVC2G08 Document number: DS37928 Rev 1 - 2 4 of 11 www.diodes.com June 2016 (c) Diodes Incorporated 74LVC2G08 Operating Characteristics Parameter Power Dissipation Capacitance Cpd Test Conditions VCC = 1.8V VCC = 2.5V VCC = 3.3V VCC = 5V Typ. Typ. Typ. Typ. f = 10MHz 17 17 17 20 Unit pF NEW PRODUCT Package Characteristics Symbol Parameter Package JA Thermal Resistance Junctionto-Ambient Test Conditions Min Typ. Max -- 313 -- -- 321 -- X2-DFN1210-8 -- 395 -- X2-DFN2010-8 -- 145 -- -- 166 -- -- 236 -- X2-DFN2010-8 JC Note: Thermal Resistance Junctionto-Case X2-DFN1410-8 (Note 10) X2-DFN1410-8 (Note 10) X2-DFN1210-8 Unit C/W C/W 10. Test condition for each package type: Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout. Switching Characteristics Typical Values at TA = +25C and nominal voltages 1.8V, 2.5V, 2.7V, 3.3V, and 5.0V. See Figure 1. Parameter tpd From Input A or B To Output Y 74LVC2G08 Document number: DS37928 Rev 1 - 2 VCC TA = -40C to +85C TA = -40C to +125C Min Typ Max Min Max 1.8V 0.15V 1.0 3.2 9.0 1.0 11.3 2.5V 0.2V 0.5 2.2 5.1 0.5 6.4 2.7V 1.0 2.5 5.3 1.0 6.7 3.3V 0.3V 0.5 2.1 4.7 0.5 5.9 5.0V 0.5V 0.5 1.7 3.8 0.5 4.8 5 of 11 www.diodes.com Unit ns June 2016 (c) Diodes Incorporated 74LVC2G08 Parameter Measurement Information From Output Under Test C RL NEW PRODUCT L (see Note A) Inputs VCC VM CL 2ns VCC/2 30pF 1k 2ns VCC/2 30pF 500 2.7V 2.5ns 1.5V 50pF 500 3.3V 0.3V 2.7V 2.5ns 1.5V 50pF 500 5.0V 0.5V VCC 2.5ns VCC/2 50pF 500 VI tr/tf 1.8V 0.15V VCC 2.5V 0.2V VCC 2.7V RL tW Vl Vl Input VM Input VM VM 0V VM 0V Voltage Waveform Pulse Duration tPLH tPHL VOH Output VM VM VOL tPHL tPLH VOH Output VM VM VOL Voltage Waveform Propagation Delay Times Inverting and Non Inverting Outputs Figure 1. Load Circuit and Voltage Waveforms Notes: A. Includes test lead and test apparatus capacitance. B. All pulses are supplied at pulse repetition rate 10MHz. C. Inputs are measured separately one transition per measurement. D. tPLH and tPHL are the same as tpd. 74LVC2G08 Document number: DS37928 Rev 1 - 2 6 of 11 www.diodes.com June 2016 (c) Diodes Incorporated 74LVC2G08 Marking Information (Top View) NEW PRODUCT XX YWX XX : Identification Code Y : Year : 0~9 W : Week : A~Z : 1~26 week; a~z : 27~52 week; z represents 52 and 53 week X : Internal Code Part Number Package Identification Code 74LVC2G08HD4-7 X2-DFN2010-8 9E 74LVC2G08HK3-7 X2-DFN1410-8 9F 74LVC2G08RA3-7 X2-DFN1210-8 9G 74LVC2G08 Document number: DS37928 Rev 1 - 2 7 of 11 www.diodes.com June 2016 (c) Diodes Incorporated 74LVC2G08 X2-DFN1210-8 Package Outline Dimensions Please see http://www.diodes.com/package-outlines.html for the latest version. X2-DFN1210-8 A A1 NEW PRODUCT Seating Plane (Pin #1 ID) C0.5X45 D e z(4x) z1(4x) L1 E k1 k L(7x) X2-DFN1210-8 Dim Min Max Typ A 0.35 0.30 A1 0 0.03 0.02 b 0.10 0.20 0.15 D 1.15 1.25 1.20 E 0.95 1.05 1.00 e 0.30 k 0.25 k1 0.20 L 0.25 0.35 0.30 L1 0.30 0.40 0.35 z 0.050 0.100 0.075 z1 0.050 0.100 0.075 All Dimensions in mm b Suggested Pad Layout Please see http://www.diodes.com/package-outlines.html for the latest version. X2-DFN1210-8 X1 Dimensions Y2 C G X X1 Y Y1 G Y C 74LVC2G08 Document number: DS37928 Rev 1 - 2 Value (in mm) 0.300 0.150 0.150 1.050 0.500 1.150 X 8 of 11 www.diodes.com June 2016 (c) Diodes Incorporated 74LVC2G08 X2-DFN1410-8 Package Outline Dimensions Please see http://www.diodes.com/package-outlines.html for the latest version. X2-DFN1410-8 NEW PRODUCT A A3 A1 X2-DFN1410-8 Dim Min Max Typ A 0.30 0.35 0.33 A1 0.00 0.03 0.02 A3 --0.10 b 0.12 0.20 0.15 D 1.30 1.40 1.35 E 0.95 1.05 1.00 e --0.35 e1 --0.55 L 0.27 0.35 0.30 L1 0.32 0.40 0.35 All Dimensions in mm D e 1 L(7x) La e1 E A b Suggested Pad Layout Please see http://www.diodes.com/package-outlines.html for the latest version. X2-DFN1410-8 X1 Y Dimensions Y2 Y1 C X X1 Y Y1 Y2 Y 1 X 74LVC2G08 Document number: DS37928 Rev 1 - 2 Value (in mm) 0.350 0.200 1.250 0.600 0.650 1.400 C 9 of 11 www.diodes.com June 2016 (c) Diodes Incorporated 74LVC2G08 X2-DFN2010-8 Package Outline Dimensions Please see http://www.diodes.com/package-outlines.html for the latest version. X2-DFN2010-8 A1 A A3 Seating Plane X2-DFN2010-8 Dim Min Max Typ A -0.40 -A1 0.00 0.05 0.02 A3 --0.13 b 0.20 0.30 0.25 D 1.950 2.05 2.00 E 0.95 1.05 1.00 e --0.50 L 0.30 0.40 0.35 z --0.125 All Dimensions in mm 75 NEW PRODUCT D R0 .0 e E L z(4x) b Suggested Pad Layout Please see http://www.diodes.com/package-outlines.html for the latest version. X2-DFN2010-8 X1 Dimensions C X X1 Y Y1 Y1 Y X 74LVC2G08 Document number: DS37928 Rev 1 - 2 Value (in mm) 0.500 0.300 1.800 0.600 1.400 C 10 of 11 www.diodes.com June 2016 (c) Diodes Incorporated 74LVC2G08 IMPORTANT NOTICE NEW PRODUCT DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systemsrelated information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2016, Diodes Incorporated www.diodes.com 74LVC2G08 Document number: DS37928 Rev 1 - 2 11 of 11 www.diodes.com June 2016 (c) Diodes Incorporated