Document Number: 28307 For technical questions, contact: aluminumcaps1@vishay.com www.vishay.com
Revision: 08-Mar-11 81
Aluminum Capacitors
Radial Low Profile, 5 mm
134 RLP 5
Vishay BCcomponents
FEATURES
Polarized aluminum electrolytic capacitors,
non-solid electrolyte
Radial leads, cylindrical aluminum case,
insulated with a blue sleeve
Charge and discharge proof
Very low profile, 5 mm height
Extremely miniaturized
Compliant to RoHS Directive 2002/95/EC
APPLICATIONS
General purpose, industrial, automotive and audio-video
Coupling, decoupling, smoothing, filtering and timing
High mounting density
Portable and mobile equipment (very small size and very
low mass), low profile equipment
MARKING
The capacitors are marked (where possible) with the
following information:
Rated capacitance (in µF)
Rated voltage (in V)
Negative terminal identification
Code indicating factory of origin
Name of manufacturer
Date code, in accordance with IEC 60062
Series number (134)
QUICK REFERENCE DATA
DESCRIPTION VALUE
Nominal case sizes ( Ø D x L in mm) 4 x 5 to 6.3 x 5
Rated capacitance range, CR1.0to100µF
Tolerance on CR± 20 %
Rated voltage range, UR6.3to50V
Category temperature range - 40 to + 85 °C
Endurance test at 85 °C 1000 h
Useful life at 85 °C 1500 h
Useful life at 40 °C, 1.4 x IR applied 40 000 h
Shelf life at 0 V, 85 °C 500 hours
Based on sectional specification IEC 60384-4/EN130300
Climatic category IEC 60068 40/085/56
134 RLP 5
5 mm
097 RLP 7
038 RSU
higher
CV -values
Longer life
SM D
153 CRV
Fig.1 Component outline
RoHS
COMPLIANT
SELECTION CHART FOR CR, UR AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)
CR
(µF)
UR (V)
6.31016253550
1.0 -----4 x 5
2.2 -----4 x 5
3.3 -----4x5
4.7 ----4x55x5
10 - - 4 x 5 - 5 x 5 6.3 x 5
22 4x5 - 5x5 - 6.3x5 -
33 - 5 x 5 - 6.3 x 5 - -
47 5x5 - 6.3x5 - - -
1006.3x5-----
134 RLP 5
Vishay BCcomponents Aluminum Capacitors
Radial Low Profile, 5 mm
www.vishay.com For technical questions, contact: aluminumcaps1@vishay.com Document Number: 28307
82 Revision: 08-Mar-11
DIMENSIONS in millimeters AND AVAILABLE FORMS
Table 1
Note
Detailed tape dimensions see section ‘PACKAGING’.
L
15
min
5
min
Ø D
Ø d
F
± 0.5
+-
Fig.2 Form CA: Long leads
Case Ø D = 4 to 6.3 mm; pitch F = 5 mm
Fig.3 Form TFA: Taped in box (ammopack)
pitch F = 2.5 mm
Case D=4to6.3mm
Fig.4 Form TNA: Taped in box (ammopack)
DIMENSIONS in millimeters AND PACKAGING QUANTITIES
NOMINAL CASE SIZE
Ø D x L
CASE
CODE ØdØDmax. Lmax. F
PACKAGING QUANTITIES
FORM
CA
FORM
TFA
FORM
TNA
4 x 5 53 0.45 4.5 6.0 1.5 ±0.5 2000 2000 2000
5 x 5 54 0.45 5.5 6.0 2.0 ±0.5 2000 2000 2000
6.3 x 5 55 0.45 6.8 6.0 2.5 ±0.5 2000 2000 2000
Document Number: 28307 For technical questions, contact: aluminumcaps1@vishay.com www.vishay.com
Revision: 08-Mar-11 83
134 RLP 5
Aluminum Capacitors
Radial Low Profile, 5 mm Vishay BCcomponents
Note
Unless otherwise specified, all electrical values in table apply
at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %
ORDERING EXAMPLE
Electrolytic capacitor 134 series
22 µF/16 V; ± 20 %
Nominal case size: Ø 5 mm x 5 mm; Form TFA
Ordering Code: MAL213435229E3
Former 12NC: 2222 134 35229
ELECTRICAL DATA
SYMBOL DESCRIPTION
CRrated capacitance at 120 Hz, tolerance ± 20 %
IRrated RMS ripple current at 120 Hz, 85 °C
IL2 max. leakage current after 2 min at UR
tan max. dissipation factor at 120 Hz
Zmax. impedance at 100 kHz
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
CR
120 Hz
(µF)
NOMINAL
CASE SIZE
Ø D x L
(mm)
IR
120 Hz
85 °C
(mA)
IL2
2min
(µA)
tan
120 Hz
Z
100 kHz
()
ORDERING CODE
MAL2134.......
BULK
LONG LEADS
TAPED
AMMOPACK
FORM
CA
F
(mm)
FORM
TFA
F
(mm)
FORM
TNA
F
(mm)
6.3
22 4 x 5 23 3 0.24 11 53229E3 1.5 33229E3 5.0 73229E3 2.5
47 5 x 5 38 3 0.24 5.2 53479E3 2.0 33479E3 5.0 73479E3 2.5
100 6.3 x 5 60 7 0.24 3.4 53101E3 2.5 33101E3 5.0 73101E3 2.5
10 33 5 x 5 35 4 0.20 6.0 54339E3 2.0 34339E3 5.0 74339E3 2.5
16
10 4 x 5 20 3 0.16 12 95105E3 1.5 95103E3 5.0 95107E3 2.5
22 5 x 5 32 4 0.16 6.4 55229E3 2.0 35229E3 5.0 75229E3 2.5
47 6.3 x 5 50 8 0.16 4.2 55479E3 2.5 35479E3 5.0 75479E3 2.5
25 33 6.3 x 5 45 9 0.14 4.6 56339E3 2.5 36339E3 5.0 76339E3 2.5
35
4.7 4 x 5 15 3 0.12 27 50478E3 1.5 30478E3 5.0 70478E3 2.5
10 5 x 5 25 4 0.12 17 50109E3 2.0 30109E3 5.0 70109E3 2.5
22 6.3 x 5 40 8 0.12 11 50229E3 2.5 30229E3 5.0 70229E3 2.5
50
1.0 4 x 5 7.5 3 0.10 28 91105E3 1.5 91103E3 5.0 91107E3 2.5
2.2 4 x 5 12 3 0.10 26 91225E3 1.5 91223E3 5.0 91227E3 2.5
3.3 4 x 5 14 3 0.10 25 51338E3 1.5 31338E3 5.0 71338E3 2.5
4.7 5 x 5 19 3 0.10 22 51478E3 2.0 31478E3 5.0 71478E3 2.5
10 6.3 x 5 29 5 0.10 14 51109E3 2.5 31109E3 5.0 71109E3 2.5
ADDITIONAL ELECTRICAL DATA
PARAMETER CONDITIONS VALUE
Voltage
Surge voltage Us1.15 x UR
Reverse voltage Urev 1V
Current
Leakage current After 2 minutes at URIL2 0.01 CRxU
R or 3 µA (whichever is greater)
Resistance
Equivalent series resistance (ESR) Calculated from tan max. and CR (see Table 3) ESR = tan /2 f CR
134 RLP 5
Vishay BCcomponents Aluminum Capacitors
Radial Low Profile, 5 mm
www.vishay.com For technical questions, contact: aluminumcaps1@vishay.com Document Number: 28307
84 Revision: 08-Mar-11
RIPPLE CURRENT AND USEFUL LIFE
Table 2
Table 3
3.3
3.2
3.0
2.8
2.6
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.5
0.0
3.1
40 50 60 70 8090100
T
amb
(°C)
lifetime multiplier
(1)
70
50
4.0
6 .0
2.0
1.5
30
15
10
3.0
20
1.0
I
A
I
R
CCC205
Fig.5 Multiplier of useful life as a function of ambient temperature and ripple current load
IA= actual ripple current at 120 Hz
IR= rated ripple current at 120 Hz, 85 C
(1) Useful life at 85 C and IR applied: 1500 h
MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY
FREQUENCY (Hz) IR MULTIPLIER
50 0.60
120 1.00
400 1.20
800 1.30
2000 1.40
TEST PROCEDURES AND REQUIREMENTS
TEST PROCEDURE
(quick reference) REQUIREMENTS
NAME OF TEST REFERENCE
Endurance IEC 60384-4/
EN130300,
subclause 4.13
Tamb = 85 °C; UR applied;
1000 h
C/C: ±20 %
tan 2 x spec. limit
IL2 spec. limit
Useful life CECC 30301,
subclause 1.8.1
Tamb = 85°C; U
R and IR applied;
1500 h
C/C: ±50 %
tan 3 x spec. limit
Z3 x spec. limit
IL2 spec. limit
no short or open circuit
total failure percentage: 3 %
Shelf life
(storage at high
temperature)
IEC 60384-4/
EN130300,
subclause 4.17
Tamb = 85 °C; no voltage applied;
500 h
after test: UR to be applied for 30 min, 24 h to 48 h
before measurement
C/C, tan , Z:
for requirements
see ‘Endurance test’ above
IL2 spec. limit
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
