WizFi630S Datasheet WizFi630S Datasheet (Version 1.0.0) (c) 2019 WIZnet Co., Ltd. All Rights Reserved. For more information, please visit our website at http://www.wiznet.io/ (c) Copyright 2019 WIZnet Co., Ltd. All rights reserved. 1 WizFi630S Datasheet Document Revision History Date Revision 2019-09-09 1.0 Changes Release (c) Copyright 2019 WIZnet Co., Ltd. All rights reserved. 2 WizFi630S Datasheet Contents 1. Overview ................................................................................................................. 4 1.1 Features........................................................................................................... 5 2. Specification............................................................................................................ 6 2.1 Wireless Specifications ................................................................................ 6 2.2 Hardware Specifications .............................................................................. 7 2.3 Software Specifications ............................................................................... 8 3. EVB Composition .................................................................................................... 9 3.1 Contents.......................................................................................................... 9 4. Technical Information ............................................................................................. 9 4.1 Block Diagram ............................................................................................. 10 4.2 WizFi630S Pin Map ..................................................................................... 11 4.3 WizFi630S Pin-Out ...................................................................................... 14 4.4 Dimensions ................................................................................................... 15 5. Important Notice .................................................................................................. 16 (c) Copyright 2019 WIZnet Co., Ltd. All rights reserved. 3 WizFi630S Datasheet 1. Overview WizFi630S is a gateway module that integrates 1T1R 802.11 Wi-Fi, a 580MHz CPU, Ethernet PHY, USB2.0 host, SD-XC, I2S, I2C and more GPIOs. WizFi630S enables a device with serial interface to connect to LAN or WLAN for remote control, measuring, and administration. WizFi630S can also work as an IP router because of its internal embedded switch. WizFi630S supports interfaces like Serial (UART), LAN, and Wi-Fi(WLAN). Functions such as Serial(UART)-To-Wi-Fi, Serial-To-Ethernet and Ethernet-To-Wi-Fi are supported by scripts and/or commands in OpenWRT. Users can connect to WizFi630S's internal web server or use the serial commands for simple Wi-Fi settings - not only for serial devices but also 8/16/32 bit micro controllers can use UART for simple Wi-Fi settings. WizFi630S can significantly reduce the procedures for wireless module design, testing, and certification; WizFi630S can be an ideal solution for users who lack wireless network experience. WizFi630S follows the 802.11b/g/n standard and supports up to 150Mbps speed in wireless interface. WizFi630S can be tested with an evaluation board and all documents are available online. (c) Copyright 2019 WIZnet Co., Ltd. All rights reserved. 4 WizFi630S Datasheet Features WizFi630A Pin compatible 580MHz Clock 16-bit DDR2 128Mbytes SRAM, 32Mbytes SPI Flash Complies with IEEE802.11b/g/n. Gateway/AP(Bridge)/AP-Client/Client(Station)/Ad-hoc Mode , WDS/Repeater supports 1T1R RF Interface (2.4G only) Physical link rate up to 150Mpbs Built-in 3 Ethernet Ports 2 Serial Ports supports Working as Wi-Fi Router WEP 64/128bit, WPA/WPA2-PSK TKIP, AES Router and Firewall function supports Operating temperature range: -25 C ~ 80 C CE, FCC, KC, RoHS certification (c) Copyright 2019 WIZnet Co., Ltd. All rights reserved. 5 WizFi630S Datasheet 2. Specification 2.1 Wireless Specifications Type Description Wireless Standard IEEE802.11b/g/n Frequency Range 802.11b: 2412 ~2462 MHz 802.11g: 2412 ~2462 MHz 802.11n HT20: 2412 ~2462 MHz 802.11n HT40: 2422 ~2452 MHz Operating Channels Output Power (Tolerance(+/-1dBm)) Receive Sensitivity Data Rates Modulation Type Antenna Encryption 802.11b: 13 Channels 802.11g: 13 Channels 802.11n HT20: 13 Channels 802.11n HT40: 9 Channels 802.11b: 11dBm@1Mbps 802.11g: 10dBm@6Mbps 802.11n HT20: 9.5dBm@MCS0 802.11n HT40: 7dBm@MCS0 802.11b: -48dBm@4% PER 802.11b: 1,2,5.5,11Mbps 802.11g: 6,9,12,18,24,36,48,54Mbps 802.11n: 29.5,86.5,115,130,144,150Mbps 802.11b: DSS(CCK, QPSK, BPSK) 802.11g: OFDM(64QAM, 16QAM, QPSK, BPSK) 802.11n HT20: OFDM(64QAM, 16QAM, QPSK, BPSK) 802.11n HT40: OFDM(64QAM, 16QAM, QPSK, BPSK) u.FL (EVB : 1T1R 2dBi) 64/128Bit WEP, WPA, WPA2, TKIP, AES, WAPI Table 1 WizFi630S Wi-Fi Specification (c) Copyright 2019 WIZnet Co., Ltd. All rights reserved. 6 WizFi630S Datasheet 2.2 Hardware Specifications Type Interface Description Serial port : 2 EA (optional 3EA) LAN port : 3 EA USB 2.0 Host : 1 EA I2S : 1EA I2C : 1EA PWM : 4EA U.FL(wireless) Temperature Humidity Operating: -25~+80 TBD Baud Rate : 115200(default) Serial Stop bits: 1, 2 Parity: None, Odd, Even Flow Control: Not supported Input Power Power Consumption Dimension DC 3.3V / 1A TBD 33mm X 43mm X 3mm Weight Table 2 WiZFi630S Hardware Specification (c) Copyright 2019 WIZnet Co., Ltd. All rights reserved. 7 WizFi630S Datasheet 2.3 Software Specifications All functions in the below table are supported by OpenWRT software. Type Operation Mode Description Access Point(Bridge), Client(Station), AP-Client Radio Enable/Disable SSID Hidden Multi SSID Wireless Rate Control TX Power Control Beacon Interval DTIM Period Fragment Length Protocol TCP, UDP, ARP, ICMP, DHCP, PPPoE, HTTP WEP 64/128bit Security WPA/WPA2-PSK - with Radius Server or Pre-Shared Key - Unicast Encryption: AES/TKIP MAC Address Filtering / Limiting Port Forwading(UDP and/or TCP) DHCP Client / Server Network WDS(Wireless Distribution System) Support NAT VLAN Administrator ID / PWD Station & AP Association Information Management SSH(Secure Shell) Support Web based Configuration / Serial Command Configuration Upgrade through WEB UI Table 3 WizFi630S SW Specification (c) Copyright 2019 WIZnet Co., Ltd. All rights reserved. 8 WizFi630S Datasheet 3. Evaluation Board 3.1 Contents Table 4 WizFi630S-EVB Contents User have to prepare below parts their own to use WizFi630S and WizFi630S-EVB. Power source & serial command line Wireless (c) Copyright 2019 WIZnet Co., Ltd. All rights reserved. Ethernet 9 WizFi630S Datasheet 4. Hardware Information 4.1 Block Diagram Figure 1. WizFi630S Block Diagram (c) Copyright 2019 WIZnet Co., Ltd. All rights reserved. 10 WizFi630S Datasheet 4.2 WizFi630S Pin Map No Type Name Shared Description GPIO#37 Will be provided as UART1 CTS-N WDT_RST_N GPIO#38 Will be provided as UART1 RTS-N 1 GND 2 3.3V 3 GND 4 3.3V 5 I/O, IPD REF_CLKO 6 I/O, IPD 7 I/O, IPD RXIP2 GPIO#18 Reserved 8 I/O, IPD RXIM2 GPIO#19 Reserved 9 I/O, IPD RxD1 GPIO#46 UART1 RXD 10 I/O, IPD TxD1 GPIO#45 UART1 TXD 11 I/O, IPD TXOP2 GPIO#20 Reserved 12 I/O, IPD TXOM2 GPIO#21 Reserved 13 O WLAN_LED GPIO#44 Wireless Init On 14 NC 15 NC(VBUS) 16 NC 17 I/O USB_PADP 18 I/O, IPD UART_RX 19 I/O USB_PADM 20 I/O, IPD UART_TX USB OTG VBUS pin in WizFi630 USB OTG data pin Data+ GPIO#13 UART0 RxD USB OTG data pin Data- GPIO#12 (c) Copyright 2019 WIZnet Co., Ltd. All rights reserved. UART0 TxD 11 WizFi630S Datasheet 21 O TXOP0 10/100 PHY Port #0 TXP 22 I RXIM0 10/100 PHY Port #0 RXN 23 O TXOM0 10/100 PHY Port #0 TXN 24 I RXIP0 10/100 PHY Port #0 RXP 25 I RXIM3 GPIO#25 10/100 PHY Port #3 RXN 26 O TXOP3 GPIO#22 10/100 PHY Port #3 TXP 27 I RXIP3 GPIO#24 10/100 PHY Port #3 RXP 28 O TXOM3 GPIO#23 10/100 PHY Port #3 TXN 29 I RXIP4 GPIO#26 10/100 PHY Port #4 RXP 30 O TXOM4 GPIO#27 10/100 PHY Port #4 TXN 31 I RXIM4 GPIO#28 10/100 PHY Port #4 RXN 32 O TXOP4 GPIO#29 10/100 PHY Port #4 TXP 33 O LINK0_LED GPIO#43 LAN port 0 Link LED 34 O LINK4_LED GPIO#39 LAN port 4 Link LED 35 O LINK3_LED GPIO#40 LAN port 3 Link LED 36 I/O, IPD LINK2 GPIO#41 WPS Button Push 37 I, IPU CPURST_N 38 I/O, IPD GPIO_0 GPIO#11 Reset Button Push 39 I/O, IPD I2S_CLK GPIO#3 General Purpose Output LED 40 I/O, IPD I2S_WS GPIO#2 General Purpose Input Switch SW1-1 41 I/O, IPD I2S_SDI GPIO#0 General Purpose Output LED 42 I/O, IPD LINK1 GPIO#42 WPS LED(GPIO20) I2S_DO GPIO#1 GPIO 43 (c) Copyright 2019 WIZnet Co., Ltd. All rights reserved. 12 WizFi630S Datasheet 44 NC 45 NC 46 NC 47 I/O, IPD I2C_SCLK GPIO#4 General Purpose Input Switch SW1-2 48 I/O, IPD I2C_SD GPIO#5 RUN LED 49 GND 50 3.3V 51 GND 52 3.3V Table 5 WizFi630S Pin Map Figure 2 pin map on mini PCI connector (c) Copyright 2019 WIZnet Co., Ltd. All rights reserved. 13 WizFi630S Datasheet 4.3 WizFi630S Pin-Out Figure 3 mini PCI connector Top View Figure 4 min PCI connector Bottom View (c) Copyright 2019 WIZnet Co., Ltd. All rights reserved. 14 WizFi630S Datasheet 4.4 Dimensions Length Width Dimensions (mm) 43 33 Hole HOLE HOLE PCB Width Height Thickness 24.2 40 2.5 1.1 Height 3 Tolerance +/- 0.2mm Figure 3 Dimensions of the module (c) Copyright 2019 WIZnet Co., Ltd. All rights reserved. 15 WizFi630S Datasheet 5. Electrical Characteristics 5.1 Absolute Maximum Rating I/O Supply Voltage 3.63V Input, Output, or I/O Voltage GND -0.3V to VCC +0.3V 5.2 Operating Conditions I/O Supply Voltage 3.3V +/- 10% Input, Output, or I/O Voltage GND -0.3V to VCC +0.3V 5.3 Power consumption Supply Voltage Conditions Typical Max Unit Steady State(WiFi off) Steady State(WiFi on) 3.3V TX peak mA Connect to AP booting 5.4 Power On Sequence Symbol Description Min Unit tPRST External Power on Reset Period 6.0 ms (c) Copyright 2019 WIZnet Co., Ltd. All rights reserved. 16 WizFi630S Datasheet 6. Important Notice WIZnet reserves the right to make corrections, modifications, enhancements, improvements and other changes to its products and services at any time, and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders, and should verify that such information is current and complete. All products are sold subject to WIZnet's terms and conditions of sale, supplied at the time of order acknowledgment. Information relating to device applications, and the like, is intended as suggestion only and may be superseded by updates. It is the customer's responsibility to ensure that their application meets their own specifications. WIZnet makes no representation and gives no warranty relating to advice, support or customer product design. WIZnet assumes no responsibilities or liabilities for the use of any of its products, conveys no license or title under any patent, copyright or mask work rights to these products, and makes no representations or warranties that these products are free from patent, copyright or mask work infringement, unless otherwise specified. WIZnet products are not intended for use in life support systems/appliances or any systems where product malfunction can reasonably be expected to result in personal injury, death, severe property damage or environmental damage. WIZnet customers using or selling WIZnet products for use in such applications do so at their own risk and agree to fully indemnify WIZnet for any damages resulting from such use. All trademarks are the property of their respective owners. (c) Copyright 2019 WIZnet Co., Ltd. All rights reserved. 17