WIZFI 630 S - Wiznet Technology

WizFi630S Datasheet

(Version 1.0.0)

For more information, please visit our website at http://www.wiznet.io/

WizFi630S Datasheet

Document Revision History

Date

Revision

Changes

2019-09-09

1.0

Release

                 
WizFi630S Datasheet 
 
© Copyright 2019 WIZnet Co., Ltd. All rights reserved.  3 
 
Contents 
Overview ................................................................................................................. 4 
1 Features........................................................................................................... 5 
Specification ............................................................................................................ 6 
1 Wireless Specifications ................................................................................ 6 
2 Hardware Specifications .............................................................................. 7 
3 Software Specifications ............................................................................... 8 
EVB Composition .................................................................................................... 9 
1 Contents .......................................................................................................... 9 
Technical Information ............................................................................................. 9 
1 Block Diagram ............................................................................................. 10 
2 WizFi630S Pin Map ..................................................................................... 11 
3 WizFi630S Pin-Out ...................................................................................... 14 
4 Dimensions ................................................................................................... 15 
Important Notice .................................................................................................. 16 
   

WizFi630S Datasheet

1. Overview

WizFi630S is a gateway module that integrates 1T1R 802.11 Wi-Fi, a 580MHz CPU, Ethernet

PHY, USB2.0 host, SD-XC, I2S, I2C and more GPIOs.

WizFi630S enables a device with serial interface to connect to LAN or WLAN for remote control,

measuring, and administration. WizFi630S can also work as an IP router because of its internal

embedded switch.

WizFi630S supports interfaces like Serial (UART), LAN, and Wi-Fi(WLAN). Functions such as

Serial(UART)-To-Wi-Fi, Serial-To-Ethernet and Ethernet-To-Wi-Fi are supported by scripts

and/or commands in OpenWRT. Users can connect to WizFi630S’s internal web server or use

the serial commands for simple Wi-Fi settings - not only for serial devices but also 8/16/32 bit

micro controllers can use UART for simple Wi-Fi settings.

WizFi630S can significantly reduce the procedures for wireless module design, testing, and

certification; WizFi630S can be an ideal solution for users who lack wireless network experience.

WizFi630S follows the 802.11b/g/n standard and supports up to 150Mbps speed in wireless

interface.

WizFi630S can be tested with an evaluation board and all documents are available online.

WizFi630S Datasheet

Features

◆ WizFi630A Pin compatible

◆ 580MHz Clock

◆ 16-bit DDR2 128Mbytes SRAM, 32Mbytes SPI Flash

◆ Complies with IEEE802.11b/g/n.

◆ Gateway/AP(Bridge)/AP-Client/Client(Station)/Ad-hoc Mode , WDS/Repeater supports

◆ 1T1R RF Interface (2.4G only)

◆ Physical link rate up to 150Mpbs

◆ Built-in 3 Ethernet Ports

◆ 2 Serial Ports supports

◆ Working as Wi-Fi Router

◆ WEP 64/128bit, WPA/WPA2-PSK TKIP, AES

◆ Router and Firewall function supports

◆ Operating temperature range: -25° C ~ 80° C

◆ CE, FCC, KC, RoHS certification

WizFi630S Datasheet

2. Specification

2.1 Wireless Specifications

Type

Description

Wireless Standard

IEEE802.11b/g/n

Frequency Range

802.11b: 2412 ~2462 MHz

802.11g: 2412 ~2462 MHz

802.11n HT20: 2412 ~2462 MHz

802.11n HT40: 2422 ~2452 MHz

Operating Channels

802.11b: 13 Channels

802.11g: 13 Channels

802.11n HT20: 13 Channels

802.11n HT40: 9 Channels

Output Power

(Tolerance(+/-1dBm))

802.11b: 11dBm@1Mbps

802.11g: 10dBm@6Mbps

802.11n HT20: 9.5dBm@MCS0

802.11n HT40: 7dBm@MCS0

Receive Sensitivity

802.11b: -48dBm@4% PER

Data Rates

802.11b: 1,2,5.5,11Mbps

802.11g: 6,9,12,18,24,36,48,54Mbps

802.11n: 29.5,86.5,115,130,144,150Mbps

Modulation Type

802.11b: DSS(CCK, QPSK, BPSK)

802.11g: OFDM(64QAM, 16QAM, QPSK, BPSK)

802.11n HT20: OFDM(64QAM, 16QAM, QPSK, BPSK)

802.11n HT40: OFDM(64QAM, 16QAM, QPSK, BPSK)

Antenna

u.FL (EVB : 1T1R 2dBi)

Encryption

64/128Bit WEP, WPA, WPA2, TKIP, AES, WAPI

Table 1 WizFi630S Wi-Fi Specification

WizFi630S Datasheet

2.2 Hardware Specifications

Type

Description

Interface

Serial port : 2 EA (optional 3EA)

LAN port : 3 EA

USB 2.0 Host : 1 EA

I2S : 1EA

I2C : 1EA

PWM : 4EA

U.FL(wireless)

Temperature

Operating: -25℃~+80℃

Humidity

TBD

Serial

Baud Rate : 115200(default)

Stop bits: 1, 2

Parity: None, Odd, Even

Flow Control: Not supported

Input Power

DC 3.3V / 1A

Power Consumption

TBD

Dimension

33mm X 43mm X 3mm

Weight

Table 2 WiZFi630S Hardware Specification

WizFi630S Datasheet

2.3 Software Specifications

All functions in the below table are supported by OpenWRT software.

Type

Description

Operation Mode

Access Point(Bridge), Client(Station), AP-Client

Wireless

Radio Enable/Disable

SSID Hidden

Multi SSID

Rate Control

TX Power Control

Beacon Interval

DTIM Period

Fragment Length

Protocol

TCP, UDP, ARP, ICMP, DHCP, PPPoE, HTTP

Security

WEP 64/128bit

WPA/WPA2-PSK

- with Radius Server or Pre-Shared Key

- Unicast Encryption: AES/TKIP

MAC Address Filtering / Limiting

Network

Port Forwading(UDP and/or TCP)

DHCP Client / Server

WDS(Wireless Distribution System) Support

NAT

VLAN

Management

Administrator ID / PWD

Station & AP Association Information

SSH(Secure Shell) Support

Web based Configuration / Serial Command Configuration

Upgrade through WEB UI

Table 3 WizFi630S SW Specification

WizFi630S Datasheet

3. Evaluation Board

3.1 Contents

Table 4 WizFi630S-EVB Contents

User have to prepare below parts their own to use WizFi630S and WizFi630S-EVB.

Power source &

serial command line

Wireless

Ethernet

WizFi630S Datasheet

4. Hardware Information

4.1 Block Diagram

Figure 1. WizFi630S Block Diagram

WizFi630S Datasheet

4.2 WizFi630S Pin Map

No

Type

Name

Shared

Description

1

GND

2

3.3V

3

GND

4

3.3V

5

I/O, IPD

REF_CLKO

GPIO#37

Will be provided as UART1 CTS-N

6

I/O, IPD

WDT_RST_N

GPIO#38

Will be provided as UART1 RTS-N

7

I/O, IPD

RXIP2

GPIO#18

Reserved

8

I/O, IPD

RXIM2

GPIO#19

Reserved

9

I/O, IPD

RxD1

GPIO#46

UART1 RXD

10

I/O, IPD

TxD1

GPIO#45

UART1 TXD

11

I/O, IPD

TXOP2

GPIO#20

Reserved

12

I/O, IPD

TXOM2

GPIO#21

Reserved

13

O

WLAN_LED

GPIO#44

Wireless Init On

14

NC

15

NC(VBUS)

USB OTG VBUS pin in WizFi630

16

NC

17

I/O

USB_PADP

USB OTG data pin Data+

18

I/O, IPD

UART_RX

GPIO#13

UART0 RxD

19

I/O

USB_PADM

USB OTG data pin Data-

20

I/O, IPD

UART_TX

GPIO#12

UART0 TxD

WizFi630S Datasheet

21

O

TXOP0

10/100 PHY Port #0 TXP

22

I

RXIM0

10/100 PHY Port #0 RXN

23

O

TXOM0

10/100 PHY Port #0 TXN

24

I

RXIP0

10/100 PHY Port #0 RXP

25

I

RXIM3

GPIO#25

10/100 PHY Port #3 RXN

26

O

TXOP3

GPIO#22

10/100 PHY Port #3 TXP

27

I

RXIP3

GPIO#24

10/100 PHY Port #3 RXP

28

O

TXOM3

GPIO#23

10/100 PHY Port #3 TXN

29

I

RXIP4

GPIO#26

10/100 PHY Port #4 RXP

30

O

TXOM4

GPIO#27

10/100 PHY Port #4 TXN

31

I

RXIM4

GPIO#28

10/100 PHY Port #4 RXN

32

O

TXOP4

GPIO#29

10/100 PHY Port #4 TXP

33

O

LINK0_LED

GPIO#43

LAN port 0 Link LED

34

O

LINK4_LED

GPIO#39

LAN port 4 Link LED

35

O

LINK3_LED

GPIO#40

LAN port 3 Link LED

36

I/O, IPD

LINK2

GPIO#41

WPS Button Push

37

I, IPU

CPURST_N

38

I/O, IPD

GPIO_0

GPIO#11

Reset Button Push

39

I/O, IPD

I2S_CLK

GPIO#3

General Purpose Output LED

40

I/O, IPD

I2S_WS

GPIO#2

General Purpose Input Switch SW1-1

41

I/O, IPD

I2S_SDI

GPIO#0

General Purpose Output LED

42

I/O, IPD

LINK1

GPIO#42

WPS LED(GPIO20)

43

I2S_DO

GPIO#1

GPIO

WizFi630S Datasheet

44

NC

45

NC

46

NC

47

I/O, IPD

I2C_SCLK

GPIO#4

General Purpose Input Switch SW1-2

48

I/O, IPD

I2C_SD

GPIO#5

RUN LED

49

GND

50

3.3V

51

GND

52

3.3V

Table 5 WizFi630S Pin Map

Figure 2 pin map on mini PCI connector

WizFi630S Datasheet

4.3 WizFi630S Pin-Out

Figure 4 min PCI connector Bottom View

Figure 3 mini PCI connector Top View

WizFi630S Datasheet

4.4 Dimensions

Dimensions

(mm)

Length

Width

Height

Hole

Width

HOLE

Height

HOLE

Φ

PCB

Thickness

43

33

3

24.2

40

2.5

1.1

Tolerance +/- 0.2mm

Figure 3 Dimensions of the module

WizFi630S Datasheet

5. Electrical Characteristics

5.1 Absolute Maximum Rating

I/O Supply Voltage

3.63V

Input, Output, or I/O Voltage

GND -0.3V to VCC +0.3V

5.2 Operating Conditions

I/O Supply Voltage

3.3V +/- 10%

Input, Output, or I/O Voltage

GND -0.3V to VCC +0.3V

5.3 Power consumption

Supply

Voltage

Conditions

Typical

Max

Unit

3.3V

Steady State(WiFi off)

mA

Steady State(WiFi on)

TX peak

Connect to AP

booting

5.4 Power On Sequence

Symbol

Description

Min

Unit

tPRST

External Power on Reset Period

6.0

ms

WizFi630S Datasheet

6. Important Notice

WIZnet reserves the right to make corrections, modifications, enhancements, improvements and

other changes to its products and services at any time, and to discontinue any product or service

without notice. Customers should obtain the latest relevant information before placing orders, and

should verify that such information is current and complete. All products are sold subject to

WIZnet’s terms and conditions of sale, supplied at the time of order acknowledgment. Information

relating to device applications, and the like, is intended as suggestion only and may be superseded

by updates. It is the customer’s responsibility to ensure that their application meets their own

specifications. WIZnet makes no representation and gives no warranty relating to advice, support

or customer product design.

WIZnet assumes no responsibilities or liabilities for the use of any of its products, conveys no

license or title under any patent, copyright or mask work rights to these products, and makes no

representations or warranties that these products are free from patent, copyright or mask work

infringement, unless otherwise specified.

WIZnet products are not intended for use in life support systems/appliances or any systems where

product malfunction can reasonably be expected to result in personal injury, death, severe property

damage or environmental damage. WIZnet customers using or selling WIZnet products for use in

such applications do so at their own risk and agree to fully indemnify WIZnet for any damages

resulting from such use.

All trademarks are the property of their respective owners.