ABJ1,2,3,4,5
17
TURQUOISE
SWITCHES
J TYPE (ABJ)
HIGH ENVIRONMENTAL
RESISTANCE
Dust protected type (Mounting hole
2.3mm .091inch type)
Immersion protected type
(wire leads bottom type) (Mounting hole
2.3mm .091inch type)
Immersion protected
(wire leads side type) Long stroke type
FEATURES
• Ultra-miniature size (12.8
×
6.5
×
6 mm) (.504
×
.256
×
.236 inch)
• Sealed construction for use in adverse environment-Sealed construc-
tion by epoxy resin and rubber cap keeps off the cause of miscontact
such as dust. Conforming to IP67* of IEC protective construction clas-
sification
• Elastomer double molding technology, an industry fir st and ultrasonic
swaging technology contribute to uniform sealing in high production
quantities
• UL/CSA approved
• Long stroke type is available
Since the repeatability is excellent and the play distance (overtrabel) from the
operating position is ample, the task of perf orming the adjustments during in-
stallation is an easy one.
• Operating position accuracy
±
0.4 mm
±
.016 inch
• Overtravel= Min. 2.0 mm .079 inch
As wide range of high pressure is achieved, a stable reliability is ensured
TYPICAL APPLICATIONS
• Industrial use video jack
• A utomotives (ex. De vice for opening and shutting of automobile door s)
*Based on the protective construction classification of IEC, items which satisfy
the test requirements are denoted with an IP designation.
ORDERING INFORMATION
Type of
switch
ABJ:
Turquoise
switch
J type
Size of mounting hole
1:
2:
3:
4:
5:
1.2 mm (.047 inch)
2.3 mm (.091 inch)
3 mm (.118 inch)
Fixed pin
(right side pin) type
Fixed pin
(left side pin) type
Terminal
4:
5:
6:
7:
8:
Solder terminal
PC board terminal
Wire leads (bottom type)
Wire leads (right side type)
Wire leads (left side type)
Contact
arrangement
1:
2:
3:
SPDT
SPST-NC
SPST-NO
Actuator
0:
2:
4:
6:
8:
L:
Pin plunger
Hinge lever
Simulated roller lever
Roller lever
Leaf lever
Long stroke type
Operating force by
pin plunger (max.)
4:
6:
7:
1.23 N {125 gf}
1.96 N {200 gf}
2.45 N {250 gf}
(Long stroke type only)
Contact
0:
1: Silver-alloy
Gold-clad
Ex. ABJ 1 4 1 0 4 0
Remarks: 1. Standard packing: Dust protected type 100 pcs./carton, 2,000 pcs./case; Immersion protected type 50 pcs./case.
2. SPST-NC and SPST-NO are only available for wire leads type.
3. Leaf lever is only available for wire leads type
4. Not ever
y
combination is available. Please refer to the followin
g
table
,
“PRODUCT TYPES”.
ABJ1,2,3,4,5
18
PRODUCT TYPES
1. Dust protected type (Terminal type)
Mounting hole 1.2mm .047inch type / Mounting hole 2.3mm .091inch type
Silver alloy
Gold-clad
2-(1). Immersion protected type (Bottom wire leads type)
Mounting hole 1.2mm .047inch type
Silver alloy
Mounting hole 2.3mm .091inch type
Gold-clad
Remarks: When ordering UL/CSA approved types, please attach suffix “9” to the part number.
Actuator Operating force
Max. Mounting hole 1.2 mm .047 inch type Mounting hole
2.3 mm .091 inch type
Solder terminal PC board terminal Solder terminal
Pin plunger 1.23 N {125 gf} ABJ141040 ABJ151040 ABJ241040
1.96 N {200 gf} ABJ141060 ABJ151060 ABJ241060
Hinge lever 0.39 N {40 gf} ABJ141240 ABJ151240 ABJ241240
0.64 N {65 gf} ABJ141260 ABJ151260 ABJ241260
Simulated roller lever 0.39 N {40 gf} ABJ141440 ABJ151440 ABJ241440
0.64 N {65 gf} ABJ141460 ABJ151460 ABJ241460
Roller lever 0.39 N {40 gf} ABJ141640 ABJ151640 ABJ241640
0.64 N {65 gf} ABJ141660 ABJ151660 ABJ241660
Actuator Operating force
Max. Mounting hole 1.2 mm .047 inch type Mounting hole
2.3 mm .091 inch type
Solder terminal PC board terminal Solder terminal
Pin plunger 1.23 N {125 gf} ABJ141041 ABJ151041 ABJ241041
1.96 N {200 gf} ABJ141061 ABJ151061 ABJ241061
Hinge lever 0.39 N {40 gf} ABJ141241 ABJ151241 ABJ241241
0.64 N {65 gf} ABJ141261 ABJ151261 ABJ241261
Simulated roller lever 0.39 N {40 gf} ABJ141441 ABJ151441 ABJ241441
0.64 N {65 gf} ABJ141461 ABJ151461 ABJ241461
Roller lever 0.39 N {40 gf} ABJ141641 ABJ151641 ABJ241641
0.64 N {65 gf} ABJ141661 ABJ151661 ABJ241661
Actuator Operating force
Max. Mounting hole 1.2 mm .047 inch type
SPDT SPST-NC SPST-NO
Pin plunger 1.23 N {125 gf} ABJ161040 ABJ162040 ABJ163040
1.96 N {200 gf} ABJ161060 ABJ162060 ABJ163060
Hinge lever 0.39 N {40 gf} ABJ161240 ABJ162240 ABJ163240
0.64 N {65 gf} ABJ161260 ABJ162260 ABJ163260
Simulated roller lever 0.39 N {40 gf} ABJ161440 ABJ162440 ABJ163440
0.64 N {65 gf} ABJ161460 ABJ162460 ABJ163460
Roller lever 0.39 N {40 gf} ABJ161640 ABJ162640 ABJ163640
0.64 N {65 gf} ABJ161660 ABJ162660 ABJ163660
Actuator Operating force
Max. Mounting hole 1.2 mm .047 inch type
SPDT SPST-NC SPST-NO
Pin plunger 1.23 N {125 gf} ABJ161041 ABJ162041 ABJ163041
1.96 N {200 gf} ABJ161061 ABJ162061 ABJ163061
Hinge lever 0.39 N {40 gf} ABJ161241 ABJ162241 ABJ163241
0.64 N {65 gf} ABJ161261 ABJ162261 ABJ163261
Simulated roller lever 0.39 N {40 gf} ABJ161441 ABJ162441 ABJ163441
0.64 N {65 gf} ABJ161461 ABJ162461 ABJ163461
Roller lever 0.39 N {40 gf} ABJ161641 ABJ162641 ABJ163641
0.64 N {65 gf} ABJ161661 ABJ162661 ABJ163661
ABJ1,2,3,4,5
19
Mounting hole 2.3mm .091inch type
Silver alloy
Gold-clad
Mounting hole 3mm .118inch type (Leaf lever type)
Silver alloy
Gold-clad
2-(2). Immersion protected type (Side wire leads type)
Fixed pin (right side pin) type
Silver alloy
Gold-clad
Fixed pin (left side pin) type
Silver alloy
Remarks: When ordering UL/CSA approved types, please attach suffix “9” to the part number.
Actuator Operating force
Max. Mounting hole 2.3 mm .091 inch type
SPDT SPST-NC SPST-NO
Pin plunger 1.23 N {125 gf} ABJ261040 ABJ262040 ABJ263040
1.96 N {200 gf} ABJ261060 ABJ262060 ABJ263060
Hinge lever 0.39 N {40 gf} ABJ261240 ABJ262240 ABJ263240
0.64 N {65 gf} ABJ261260 ABJ262260 ABJ263260
Simulated roller lever 0.39 N {40 gf} ABJ261440 ABJ262440 ABJ263440
0.64 N {65 gf} ABJ261460 ABJ262460 ABJ263460
Roller lever 0.39 N {40 gf} ABJ261640 ABJ262640 ABJ263640
0.64 N {65 gf} ABJ261660 ABJ262660 ABJ263660
Actuator Operating force
Max. Mounting hole 2.3 mm .091 inch type
SPDT SPST-NC SPST-NO
Pin plunger 1.23 N {125 gf} ABJ261041 ABJ262041 ABJ263041
1.96 N {200 gf} ABJ261061 ABJ262061 ABJ263061
Hinge lever 0.39 N {40 gf} ABJ261241 ABJ262241 ABJ263241
0.64 N {65 gf} ABJ261261 ABJ262261 ABJ263261
Simulated roller lever 0.39 N {40 gf} ABJ261441 ABJ262241 ABJ263441
0.64 N {65 gf} ABJ261461 ABJ262461 ABJ263461
Roller lever 0.39 N {40 gf} ABJ261641 ABJ262641 ABJ263641
0.64 N {65 gf} ABJ261661 ABJ262661 ABJ263661
Actuator Operating force
Max. Mounting hole 3 mm type
SPDT SPST-NC SPST-NO
Leaf lever 0.98 N {100 gf} ABJ361840 ABJ362840 ABJ363840
1.27 N {130 gf} ABJ361860 ABJ362860 ABJ363860
Actuator Operating force
Max. Mounting hole 3 mm type
SPDT SPST-NC SPST-NO
Leaf lever 0.98 N {100 gf} ABJ361841 ABJ362841 ABJ363841
1.27 N {130 gf} ABJ361861 ABJ362861 ABJ363861
Actuator Operating force
Max. Wire leads direction Wire leads type
SPST-NC SPST-NO
Leaf lever
1.27 N {130 gf} Right ABJ472840 ABJ473840
1.27 N {130 gf} Left ABJ482840 —
1.76 N {180 gf} Right ABJ472860 ABJ473860
1.76 N {180 gf} Left ABJ482860 —
Actuator Operating force
Max. Wire leads direction Wire leads type
SPST-NC SPST-NO
Leaf lever
1.27 N {130 gf} Right ABJ472841 ABJ473841
1.27 N {130 gf} Left ABJ482841 —
1.76 N {180 gf} Right ABJ472861 ABJ473861
1.76 N {180 gf} Left ABJ482861 —
Actuator Operating force
Max. Wire leads direction Wire leads type
SPST-NC SPST-NO
Leaf lever
1.27 N {130 gf} Right ABJ572840 ABJ573840
1.27 N {130 gf} Left ABJ582840 —
1.76 N {180 gf} Right ABJ572860 ABJ573860
1.76 N {180 gf} Left ABJ582860 —
ABJ1,2,3,4,5
20
Gold-clad
Mounting hole 3mm .118inch type
Silver alloy
Gold-clad
3. Immersion protected type (Bottom wire leads type) Long stroke type
Mounting hole 2.3mm .091inch type
Silver alloy
Gold-clad
Remarks: When ordering UL/CSA approved types, please attach suffix “9” to the part number.
Actuator Operating force
Max. Wire leads direction Wire leads type
SPST-NC SPST-NO
Leaf lever
1.27 N {130 gf} Right ABJ572841 ABJ573841
1.27 N {130 gf} Left ABJ582841 —
1.76 N {180 gf} Right ABJ572861 ABJ573861
1.76 N {180 gf} Left ABJ582861 —
Actuator Operating force
Max. Wire leads direction Wire leads type
SPST-NC
Leaf lever 1.27 N {130 gf} Left ABJ382840
1.76 N {180 gf} ABJ382860
Actuator Operating force
Max. Wire leads direction Wire leads type
SPST-NC
Leaf lever 1.27 N {130 gf} Left ABJ382841
1.76 N {180 gf} ABJ382861
Actuator Operating force
Max. Mounting hole 2.3 mm type
SPDT SPST-NC SPST-NO
Pin plunger (Horizontal) 2.45 N {250 gf} ABJ261L70 ABJ262L70 ABJ263L70
Actuator Operating force
Max. Mounting hole 2.3 mm type
SPDT SPST-NC SPST-NO
Pin plunger (Horizontal) 2.45 N {250 gf} ABJ261L71 ABJ262L71 ABJ263L71
APPLICABLE CURRENT RANGE
Contact
Applicable current
range Max. operating force for
operation (at pin plunger)
1mA 0.1A 1A 2A
Ag
Au
1.23 N {125 gf} 1.96 N {200 gf}
SPECIFICATIONS
1. Contact rating
Type Operating force Max. Standard rating Low-level circuit rating
Silver alloy contact 1.76 N {180 gf}, 1.96 N {200 gf} 2 A 125 V AC
2 A 30 V DC —
1.23 N {125 gf}, 1.27 N {130 gf} 1 A 125 V AC
1 A 30 V DC —
Long stroke type
Silver alloy contact 2.45 N {250 gf} 1 A 125 V AC
1 A 30 V DC —
Gold-clad contact 1.23 N {125 gf}, 1.27 N {130 gf}
1.76 N {180 gf}, 1.96 N {200 gf} 0.1 A 125 V AC 5 mA 6 V DC
2 mA 12 V DC
1 mA 24 V DC
Long stroke type
Gold-clad contact 2.45 N {250 gf} 0.1 A 125 V AC
0.1 A 30 V DC 5 mA 6 V DC
2 mA 12 V DC
1 mA 24 V DC
ABJ1,2,3,4,5
21
2. Characteristics
3. Operating characteristics
Operating force / Release force / Pretravel
Movement differential / Overtravel / Operating position
( ): Low force type
Mechanical life
(O.T.: Specified value)
Leaf lever, Long stroke type Min. 5
×
10
5
(at 60 cpm)
Wire leads (right & left side type) Min. 3
×
10
5
(at 60 cpm)
Other types Min. 10
6
(at 60 cpm)
Electrical life at rated load
(O.T.: max.) Silver alloy contact type Min. 3
×
10
4
(at 60 cpm)
Gold-clad contact type Min. 10
5
(at 20 cpm)
Insulation resistance Min. 100 M
Ω
(at 500 V DC insulation resistance meter)
Dielectric strength
Between non-continuous terminals
Between each terminal and other exposed metal parts
Between each terminal and ground
600 Vrms
1,500 Vrms
1,500 Vrms
Vibration resistance (Pin plunger type) 10 to 55 Hz at single amplitude of 0.75 mm (Contact opening max. 1 msec.)
Shock resistance (Pin plunger type) Min. 294 m/s
2
{30 G} (Contact opening max. 1 msec.)
Contact resistance (Initial)
Silver contact type Dust protected type (IP50): Max. 50 m
Ω
Immersion protected type (IP67): Max. 100 m
Ω
(By voltage drop 1 A 6 to 8 V DC)
Gold clad contact type Dust protected type (IP50): Max. 100 m
Ω
Immersion protected type (IP67): Max. 150 m
Ω
(By voltage drop 0.1 A 6 to 8 V DC)
Allowable operating speed (at no load) 1 to 500 mm/sec.
Max. operating cycle rate (at no load) Other type: 120 cpm
Long stroke type: 60 cpm
Ambient temperature –40
°
C to +85
°
C –40
°
F to +185
°
F
Ambient humidity Max. 95% R.H.
Unit weight Approx. 0.5 g .018 oz (IP50 type)
Type of actuator Operating force, Max. Release force, Min Pretravel, Max. mm
inch
Pin plunger 1.23N {125gf} 1.96N {200gf} 0.15N {15gf} 0.25N {25gf} 0.6 .024
Hinge lever 0.39N {40gf} 0.64N {65gf} 0.029N {3.0gf} 0.049N {5.0gf} 3.0 .118
Simulated roller lever 0.39N {40gf} 0.64N {65gf} 0.029N {3.0gf} 0.049N {5.0gf} 3.0 .118
Roller lever 0.39N {40gf} 0.64N {65gf} 0.029N {3.0gf} 0.049N {5.0gf} 3.0 .118
Leaf lever 0.98N {100gf} 1.27N {130gf} 0.20N {20gf} 0.29N {30gf} 6.0 .236
Long stroke type 2.45N {250gf} 0.19N {20gf} —
Type of actuator Movement
differential,
Max. mm inch Overtravel,
Min. mm inch
Operating position, mm inch
Mounting hole:
1.2 .047 Mounting hole:
2.3 .091 Mounting hole:
3.0 .118
Pin plunger 0.12 .005 0.25 .010 5.5
±
0.2 .217
±
.008 7.0
±
0.2 .276
±
.008 —
Hinge lever 0.5 .020 0.5 .020 6.8
±
1.0 .286
±
.039 8.3
±
1.0 .327
±
.039 —
Simulated roller lever 0.5 .020 0.5 .020 9.8
±
1.0 .386
±
.039 11.3
±
1.0 .445
±
.039 —
Roller lever 0.5 .020 0.5 .020 13.1
±
1.0 .516
±
.039 14.6
±
1.0 .575
±
.039 —
Leaf lever 1.0 .039 2.5 .098 — — 16.0
±
2.0 .630
±
.079
Long stroke type 0.5 .020 2.0 .079 — 2.5
±
0.4 .098
±
.016 —
DIMENSIONS
1. Dust protected type
1-(1) PC board terminal
Pin plunger
mm inch General tolerance:
±
0.25
±
.010
0.0394
Operating Position
.217±.008
0.213±.012
6-C .012
.079
.200±.006.200±.006
.504±.006
Pretravel 0.6Max.
.024Max 1.5 dia
.063
.043±.005
.059±.005
t=0.4
.173
.236
1.2±0.05 dia.
.200±.039
5.08±0.1
6
4.4 1.25±0.12
1.5±0.12
1.1±0.12
1.6
0.9 5.08±0.15 5.08±0.15
6-C 0.3
5.4±0.3
5.5±0.2
1.0
.197±.006
5.0±0.15
5.50
.217
.035 .256±.004
6.5±0.1
12.8±0.15
+.005
-0
.059±.004
1.5±0.1
.049±.005
2 dia.
-0
+0.12
5.08±0.1
.200±.039
.059 dia
.016
.047±.002 dia.
Pretravel, Max. mm inch 0.6 .024
Movement differential, Max. mm inch 0.12 .005
Overtravel, Min. mm inch 0.25 .010
Operating
position
Distance from mounting
hole, mm inch 5.5
±
0.2
.217
±
.088
Distance from stand-off,
mm inch 7
±
0.3
.276
±
.012
ABJ1,2,3,4,5
22
Hinge lever
mm inch General tolerance:
±
0.25
±
.010
.339
8.6 4.4±0.4
.173±.016
.268±.039
6.8±1.0
.327±.047
8.3±1.2
Pretravel 3.0Max.
.118Max
R13.3
.524
4.2
.165
.118
3
.200±.039
5.08±0.15.08±0.1
.200±.039
.047±.002 dia.
1.2±0.05 dia.
Operating Position
Pretravel, Max. mm inch 3.0 .118
Movement differential, Max. mm inch 0.5 .020
Overtravel, Min. mm inch 0.5 .020
Operating
position
Distance from mounting
hole, mm inch 6.8
±
1.0
.267
±
.039
Distance from stand-off,
mm inch 8.3
±
1.2
.327
±
.047
Simulated roller lever
.118Max
Pretravel 3.0Max.
.386±.039
9.8±1.0
Operating Position
.445±.047
11.3±1.2
.520
R13.2
R2.5
.098
3.3±0.4
.130±.016 3
.118
1.2±0.05 dia.
.200±.039
5.08±0.1 5.08±0.1
.200±.039
.047±.002 dia.
Pretravel, Max. mm inch 3.0 .118
Movement differential, Max. mm inch 0.5 .020
Overtravel, Min. mm inch 0.5 .020
Operating
position
Distance from mounting
hole, mm inch 9.8
±
1.0
.386
±
.039
Distance from stand-off,
mm inch 11.3
±
1.2
.445
±
.047
Roller lever
1.2±0.05 dia.
.200±.039
5.08±0.1 5.08±0.1
.200±.039
.047±.002 dia.
Operating Position
14.6±1.2
.575±.047
Pretravel 3.0Max.
.118Max
.134±.016
3.4±0.4
R13.8
R.543
.087
2.2
.189 dia.
4.8 dia.
Pretravel, Max. mm inch 3.0 .118
Movement differential, Max. mm inch 0.5 .020
Overtravel, Min. mm inch 0.5 .020
Operating
position
Distance from mounting
hole, mm inch 13.1
±
1.0
.516
±
.039
Distance from stand-off,
mm inch 14.6
±
1.0
.575
±
.039
1-(2) Solder terminal
Pin plunger Mounting hole: 1.2 mm .047 inch Mounting hole: 2.3 mm .091 inch
1.5 dia
0.4
.173
.236
6
4.4
.059 dia
.016
0.0394
Pretravel 0.6Max.
5.08±0.15
.200±.006
.059±.004
1.5±0.1
5±0.15
.197±.006
12.8±0.15
.504±.006
+0.12
5.08±0.15
.200±.006
2-0.47
2-1.2-0
-0
5.4±0.3
0.213±.012
6-C 0.3
6-C .012
.024Max
5.5±0.2
.217±.008
Operating Position
1.0
.197
5
.059
1.5
.256±.004
6.5±0.1 dia.
dia.
+.005
.047
1.2 .087
2.2
1.5 dia
0.4
.236
6
.059 dia
.016
0.181±.012
4.6±0.3
.256±.006
6.5±0.15
2.4-.05
+0.1
.094+.004
-.002
.224
5.7
1.5
.059
.079
2
.020
0.5
.200±.006
5.08±0.15
.504±.006
12.8±0.15 .200±.006
5.08±0.15
.236
6
4.8±0.1
.189±.004
.047
1.2 .087
2.2
2.4-0.05
+0.1 dia.
+.004
.094-.002 dia.
1.7
.067
Pretravel 0.6Max
.024Max
Operating Position
.276±.008
7±0.2
Remarks: Dimensions of the actuator type are the same as corresponding PC board terminal types.
ABJ1,2,3,4,5
23
2. Immersion protected type
2-(1) Bottom wire leads type
Pin plunger
mm inch General tolerance:
±
0.25
±
.010
Mounting hole: 1.2 mm .047 inch
7.50
.295
11.811±.394
300±10
.197±.079
5±2
13.9
.547
.236
6
Thickness of the lead
wire: 0.3 mm
2
UL/CSA approv ed type:
AWG #20
Color of the lead wire:
COM...Black
N.C. ...Red
N.O. ...White
Mounting hole: 2.3 mm .091 inch
COM N.O. N.C.
6.5±0.15
.256±.006
11.811±.394
300±10
.197±.079
5±2
13.9±0.4
.547±.016
.323
8.2
Thickness of the lead
wire: 0.3 mm
2
UL/CSA approv ed type:
AWG #20
Color of the lead wire:
COM...Black
N.C. .... Red
N.O. ...White
Remarks: 1. As f or M1.2 type, other dimensions are the same as those of corresponding PC board terminal types.
As for M2.3 type, other dimensions are the same as those of corresponding solder terminal types.
2. Dimensions of the actuator type are the same as corresponding PC board terminal types.
Leaf lever
Mounting hole: 3 mm .118 inch
.189±.012
4.8±0.3
.128
R3.25
.787±.016
20.0±0.4 .197±.079
.098
R2.5
13±0.1
.512±.004
.197
5
9.25
.364
.256
6.5
.339±.039
8.6±12.5
.098
Free Position
(19.0)
(.748)
Operating Position
(16±2)
(.630±.079)
(.453)
(11.5 min.)
Totaltravel Position
.295
7.5
300±10
11.811±.394
5±2
Pretravel 6 max.
.236 max.
3
.118 dia.
+0
+0
-0.15
-.006
3.1
.122+.004
+0.1
–0.05
–.002
dia.
.197
5
.354
9
.236
6
4.4
.173
3.3
.130
Pretravel, Max. mm inch 6.0 .236
Movement differential,
Max. mm inch 1.0 .039
Overtravel, Min mm inch 2.5 .098
Operating
position
Distance from
mounting hole,
mm inch
16.0
±
2.0
.630
±
.079
ABJ1,2,3,4,5
24
2-(2) Side wire leads type
Fixed pin type
Right side pin type
Right wire leads type
mm inch General tolerance:
±
0.25
±
.010
16.65
.656
3.45
.136
8.55
.337
6.7
.264
6.0
.236
5.0
.197
300±10
11.811±.394
5±2
.197±.079
7.6±1.0
.299±.039
9.53±0.1
.375±.004
9.53
.375
C0.2
.008
R2.0
.079
2.6±0.05
.102±.002
6.9±0.3
.272±.012
2.6±0.05
.102±.002
2.2±0.05 dia.
.087±.002 dia.
Free position (F.P.)
13.05 .514 max.
Operating position (O.P.)
10.7±0.7 .421±.028
Totaltravel position (T.T.P.)
(8.55)(.337)
5.0+0.0
−0.2
.197+0
−.008
Pretravel, Max. mm inch 2.6 .102
Movement differential,
Max. mm inch 0.5 .020
Overtravel, Min mm inch 1.4 .055
Operating
position
Distance from
mounting hole,
mm inch
10.7
±
0.7
.421
±
.028
Left wire leads type
16.65
.656
3.45
.136
8.55
.337
300±10
11.811±.394
5±2
.197±.079
7.6±1.0
.299±.039
R2.0
.079
2.6±0.05
.102±.002
6.9±0.3
.272±.012
Free position (F.P.)
13.05 .514 max.
Operating position (O.P.)
10.7±0.7 .421±.028
Totaltravel position (T.T.P.)
(8.55)(.337)
9.53±0.1
.375±.004
9.53
.375
C0.2
.008 2.6±0.05
.102±.002
2.2±0.05 dia.
.087±.002 dia.
6.7
.264
6.0
.236
5.0
.197
5.0+0.0
−0.2
.197+0
−.008
Pretravel, Max. mm inch 2.6 .102
Movement differential,
Max. mm inch 0.5 .020
Overtravel, Min mm inch 1.4 .055
Operating
position
Distance from
mounting hole,
mm inch
10.7
±
0.7
.421
±
.028
Left side pin type
Right wire leads type
16.65
.656
3.45
.136
8.55
.337
6.7
.264
6.0
.236
5.0
.197
300±10
11.811±.394
5±2
.197±.079
7.6±1.0
.299±.039
9.53±0.1
.375±.004
9.53
.375
C0.2
.008
R2.0
.079
2.6±0.05
.102±.002
6.9±0.3
.272±.012
2.6±0.05
.102±.002
2.2±0.05 dia.
.087±.002 dia.
Free position (F.P.)
13.05 .514 max.
Operating position (O.P.)
10.7±0.7 .421±.028
Totaltravel position (T.T.P.)
(8.55)(.337)
5.0+0.0
−0.2
.197+0
−.008
Pretravel, Max. mm inch 2.6 .102
Movement differential,
Max. mm inch 0.5 .020
Overtravel, Min mm inch 1.4 .055
Operating
position
Distance from
mounting hole,
mm inch
10.7
±
0.7
.421
±
.028
ABJ1,2,3,4,5
25
Left wire leads type
mm inch General tolerance:
±
0.25
±
.010
16.65
.656
3.45
.136
8.55
.337
6.7
.264
6.0
.236
5.0
.197
300±10
11.811±.394
5±2
.197±.079
7.6±1.0
.299±.039
9.53±0.1
.375±.004
9.53
.375
C0.2
.008
R2.0
.079
2.6±0.05
.102±.002
6.9±0.3
.272±.012
2.6±0.05
.102±.002
2.2±0.05 dia.
.087±.002 dia.
Free position (F.P.)
13.05 .514 max.
Operating position (O.P.)
10.7±0.7 .421±.028
Totaltravel position (T.T.P.)
(8.55)(.337)
5.0+0.0
−0.2
.197+0
−.008
Pretravel, Max. mm inch 2.6 .102
Movement differential,
Max. mm inch 0.5 .020
Overtravel, Min mm inch 1.4 .055
Operating
position
Distance from
mounting hole,
mm inch
10.7
±
0.7
.421
±
.028
Mounting hole 3mm .118 inch type
5.0
.197
C0.30
.012
R2.0
.079
3.1+0.1
−0
.122+.004
−0
Free position (F.P.)
18.6 .732 max.
Operating position (O.P.)
16.25±0.7 .640±.028
Totaltravel position (T.T.P.)
(14.1)(.555)
5.8±1.0
.228±.039 12.3
.484
1.85±0.3
.073±.012
19.6
.772
4.0
.157
9.0
.354 3.3
.130 6.0
.236
300±10
11.811±.394
5±2
.197±.079 13.0±0.1
.512±.004
6.0+0.2
−0.15
.236+.008
−.006
8.4+0.1
−0.3
.331+.004
−.012
3.0+0
−0.1
.118+0
−.004 dia.
dia.
Pretravel, Max. mm inch 2.6 .102
Movement differential,
Max. mm inch 0.5 .020
Overtravel, Min mm inch 1.4 .055
Operating
position
Distance from
mounting hole,
mm inch
16.25
±
0.7
.640
±
.028
ABJ1,2,3,4,5
26
3. Immersion protected type (Bottom wire leads type) Long stroke type
Mounting hole: 2.3 mm .091 inch
mm inch General tolerance:
±
0.25
±
.010
Free position (F.P.)
3.2 .126 max.
Operating position (O.P.)
2.5±0.4 .098±.016
2.0 dia.
.079 dia.
8.1
.319
8.2
.323
300±10
11.811±.394
16.7
.657
4.95
.195 12.8
.504
1.0
.039
6.0±0.15
.236±.006
2.4+0.1
−0.05
.236+.004
−.002 19.4
.764
2.5±0.1
.098±.004
4.8±0.1
.189±.004
5±2
.197±.079
13.9±0.4
.547±.016
COM NO NC
2.4 dia.
.236 dia.
+0.1
−0.05
+.004
−.002
3.0 dia.
.118 dia.
+0.
−0.15
+0
−.006
9.0
.354
6.0
.236
C0.6
.024
Movement differential,
Max. mm inch 0.5 .020
Overtravel, Min mm inch 2.0 .079
Operating position 2.5
±
0.4
.098
±
.016
