G2A
2
■Relays Other than Standard Models
■Accessories
Sockets
Note: With monitor terminal.
Relay Hold-down Clips Socket Mounting Plates
Specifications
■Coil Ratings
The rated currents for some of the built-in operation indicator models differ from the values given in this table. Refer to note 5 below.
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of +15%/–20% for AC rated current and
±15% for DC coil resistance.
2. The AC coil resistance and coil inductance values are for reference only.
3. Performance characteristic data is measured at a coil temperature of 23°C.
4. The maximum voltage is one that is applicable instantaneously to the Relay coil at an ambient temperature of 23°C and not continuously.
5. For built-in operation indicator models rated at 6, 12, and 24 VDC, add an LED current of approx. 5 mA to the rated currents.
Arc barrier equipped Built-in diode Built-in operation indicator
G2A-432AY G2A-432A-D G2A-432A-N
The arc barrier equipped model is
a relay designed to prevent arc
short-circuiting between phases
and can be used in a circuit which
has potential difference between
phases. The switching power of
such a circuit with potential differ-
ence must be limited to less than
1/2 the rated load when using this
Relay.
The built-in diode model is a relay
which incorporates a diode for ab-
sorption of the reverse voltage
that may be generated when the
coil is de-energized. Because the
release time of this model is long-
er than the standard model, pay
adequate attention to this point in
designing a circuit. Also, pay at-
tention to the + polarity of the coil.
The reverse-breakdown voltage
of the diode is 1,000 V.
The built-in operation indicator
model has a newly added opera-
tion indicator to the conventional
operation indication mechanism
and facilitates operation monitor-
ing without being affected by am-
bient illumination.
With the -N model (rated at 16,
12, 24, and 48 VDC) and -N1
model rated at 6, 12, 24, 48, and
100 VDC), pay attention to the +
polarity of the coil.
Track mounting Front-connecting
Socket
Screw terminals Solder terminals Wire-wrap terminals PCB
terminals
Without Hold-
down Clip
With Hold-down
Clip
Without Hold-
down Clip
With Hold-down
Clip
PYF14A PYF14(-E), PYF14A-
TU, PYF14T
PY14, PY14-3
(see note)
PY14-Y2 PY14QN(2) PY14QN(2)-Y2 PY14-0,
PY14-02
For Front-connecting Socket PYC-A2
For Back-connecting Socket PYC-3/PYC-5
For Socket Mounting Plate PYC-2
For one Socket PYP-1
For 18 Sockets PYP-18
For 36 Sockets PYP-38
Rated
voltage
Rated current Coil
resistance
Coil inductance (ref.
value)
Must
operate
Must
release
Max.
voltage
Power
consumption
50 Hz 60 Hz Armature
OFF
Armature
ON
% of rated voltage
6 VAC 295 mA 233 mA 8.9 Ω0.048 H 0.065 H 80 % max. 30 % min. 110 % Approx. 1.4 VA
12 VAC 148 mA 117 mA 34 Ω0.166 H 0.257 H
24 VAC 73 mA 58 mA 136 Ω0.691 H 1.04 H
50 VAC 35 mA 28 mA 530 Ω3.08 H 4.53 H
100/
110 VAC
17.7/
21.4 mA
14/
16.8 mA
2,200 Ω12.42/
12.38 H
18/16.4 H
200/
220 VAC
8.9/
10.8 mA
7/8.4 mA 8,800 Ω42.2/
41.8 H
72/65.5 H
6 VDC 176 mA 34 Ω0.14 H 0.26 H 10 % min. 110 % Approx. 1.1 W
12 VDC 88 mA 136 Ω0.6 H 1.0 H
24 VDC 45 mA 530 Ω2.7 H 4.6 H
48 VDC 22 mA 2,200 Ω11 H 19 H
100 VDC 11.4 mA 8,800 Ω43 H 73 H