JWS Series High quality industrial power supplies 24 Universal AC Input Radiated and Conducted EMI Input Transient Protection Power Factor and Harmonic Correction Wide Range Output Adjustment World wide Safety Agency Approvals Optional Din Rail Mounting 5 Year Warranty Lambdas new JWS series meets the demands of todays world wide industrial market with universal input, international agency approvals, and CE Marking. Reducing the risk of system failures the JWS has been engineered to meet input transients and brown-outs in compliance to EN61000-4 (2,-3, -4,-5,-6) as well as meeting EMI Curve B (for both radiated and conducted). Available in six package sizes from 50-600 watts with output voltages ranging from 2 to 48 volts. Backed by Lambdas five year warranty the JWS series will prove to be the industrial choice for insured reliability and high quality, guaranteeing end-users maximum up-time. Similar products Page zws Low Cost PC Board 14 JFS High Power Single Output 28 sv Multiple Output 44 RWS-A Lower Power 22AC Input ..... 0. cc cence 85-265Vac, 47-63Hz. MAX CURRENT AMPS AT OUTPUT POWER (W) 40 45 sor MODEL DC I | ee 120-330VDC. npu QV (1.8-2.4) 120.0 60.0 60.0 60.0 3WS300-2 Efficloncy ....-.....0050> 61% on 2V, 65% on 3.3V, 74% on 5.0V, 240. 120.0 120. 120. 77% on 12.0 -15.0V, 80% on 24.0 -48.0V 0.0 20.0 20.0 IWS600-2 ; 3.3V (2.85-3.63) 33.0 10.0 10.0 8.0 JWS50-3/A Power Factor Correction .... 0.99 (Typical), EN61000-3-2. 49.5 15.0 12.0 9.0 JWS75-3/A Input Transient Protection .. EN61000-4 (2,-3,-4,-5,-6). 66.0 20.0 16.0 12.0 JWS100-3/A 1EC 1000-4 (2,-3,-4,-5,-6). 99.0 30.0 24.0 18.0 JWS150-3/A 1EC801- (2,-3,-4,-5). 198.0 60.0 60.0 60.0 JWS300-3 EMI 2... cee ee ne Conducted and Radiated per: . 120.0 120. 120. JWS600-3 EN55022-B Curve B & FCC Class B. $96.0 20.0 0.0 s 5V (4.50-5.5) 50.0 10.0 10.0 6.0 JWS50-5/A Output Voltage Adj Range .. +10% (+20% ~-10% for 300W/600W). 750 150 12.0 90 JWS75-5/A Line Regulation ......... 0.5%, 100.0 20.0 16.0 12.0 JWS100-5/A Load Regulation .......... 0.8%. 150.0 30.0 24.0 18.0 JW5150-5/A ' 300.0 60.0 60.0 60.0 JWS300-5 Output Ripple ...... 2.052 120 mV p-p for 2, 3.3 & 5 volts. 150 mV p-p for 12, 15 & 24 volts. 600.0 120.0 120.0 120.0 JWS600-5 200 mV p-p for 48 volts. 12V (10.8-13.2) 51.6 4.3 4.3 3.4 JWS50-12/A Parallel Operation ........ Active current sharing is achieved through a 75.6 6.3 5.0 3.8 JWS75-12/A single wire connection. (3O0W/600W only). 102.0 8.5 6.8 5.1 5WS100-12/A Hold-up Time ......--.+-- 20ms (typical). 156.0 13.0 10.4 78 JWS150-12/A 324.0 27.0 27.0 27.0 JWS300-12 Overcurrent Protection ..... Electronic current limiting circuit limits the 645.0 53.0 53.0 53.0 JWS600-12 output current to 105% of the maximum . . . , rated current with automatic recovery. 15V (13.5-16.5) 52.5 3.5 3.5 2.8 JWS50-15/A Overvolitage Protection .... Non-crowbar, inverter shutdown type OV 75.0 5.0 4.0 3.0 JWS75-15/A protection. 105.0 7.0 5.6 42 JWS100-15/A Cooling ....0...ccceee ees Convection, Internal Fan (800W/600W) 150.0 10.0 8.0 6.0 IWS150-15/A 330.0 22.0 22.0 22.0 JWS300-15 Operating Temperature Range = -10C to +50C with derating above 645.0 43.0 43.0 43.0 JWS600-15 +40C, . , : , -10C to +60C with derating above 24V (21.6-26.4) 52.8 2.2 2.2 1.7 JWS50-24/A +50C (300W/600W}. 76.8 3.2 2.5 1.9 JWS75-24/A Storage Temperature ...... -30C to +85C. 108.0 4.5 3.6 2.7 JWS100-24/A Temperature Coefficient .... Less than 0.02%. 156.0 6.5 5.2 3.9 JWS150-24/A Isolation ... 0. c.ce eee aee input to Qutput 3.0KVAC. A48V (43.2-52.8) 52.8 14 1 0.88 JWS50-48/A Input to Chassis (FG) 2.0kVAC. 76.8 1.6 1.3 0.96 4IWS75-48/A Output to Chassis (FG) - 500VAC. 100.8 24 17 1.26 JWS100-48/A Output Status Indicator .... A green LED when DC output is ON. 158.4 3.3 2.6 1.98 JWS150-48/A Remote On/Off .......... An open circuit or a voltage of 2 - 5V applied to the terminals will initiate turn-off. Optional for (60-150W). Remote Sensing .......... (t00W-600W}. Input and Output Connections Barrier strip with clear plastic cover. Options for JWS50 - JWS150 only. Jws 50-5/_ _ DIN Rail Mounting Bracket .. LDIN50 (JWSS50only). / L Blank: Standard open frame & terminal block Safety Agency Approval .... 1! Beare tow ottaoe Directive) A: With cover & terminal block Standard B: Open frame & Malex connectors Special order. Consult factory. Warranty ..-...0ecesnnee 5 years. C: With cover & Molex connectors Special order. Consuit factory. R: With remote ON/OFF control. Special order. Consult factory. Normal output voltage Maximum output power Series name *Connector type is JWS50 & JWS75 only. CcGNIG@ AC-DC POWER SUPPLIES 25JWS Series JWSS50/JWS75 JWS100 High quality industrial power supplies JWS150 VOLTAGE ADJUSTMENT COVER 5x M3 REMOTE ON/OFF CONTROL CONNECTOR (OPTION) 2x M3 SEE NOTE 2 B TERMINAL = F co - COVER ~ - 295 (7.5) - J --K ==. 143.5) 145) 157 (4.0) i i ft j 7 A lie 8) wi Vi tof pe E - 59 4 ui 993 (15.0) (76.9) NOTES: 1. DIMENSIONS ARE IN INCHES EXCEPT DIMENSIONS IN () ARE IN MM. 2. 5x M3 EMBOSSO, TAPPED AND COUNTERSUNK HOLES FOR CUSTOMER MTG. SCREWS MUST NOT PROTRUDE INTO POWER SUPPLY BY MORETHAN .23(6}. 4. WEIGHT: JWS50-350 GRAMS, JWS75-450 GRAMS. 26 VOLTAGE ADJUSTMENT 7xM4 | COVER REMOTE ON/OFF CONTROL CONNECTOR 2B-XH-A (JST) (OPTION) 4 NOTE 2 TERMINAL COVER 1.69 | ro 4.921(125.0) 7.40 (188.0) ________, 6,632 a (186.5) ___} A 2 177145) FOR CUSTOMER CHASSIS MOUNTING a USING M MOUNTING SCREWS , (ean 800) + aK SEE NOTE , 964 225) @ Oo 55. 4) RESEN =z (205) NOTE: 1. DIMENSIONS ARE IN INCHES EXCEPT DIMENSIONS ( ) ARE IN MM. 2, 5x M4 EMBOSS, TAPPED AND COUNTERSUNK HOLES: FOR CUSTOMER MTG. SCREWS MUST NOT PROTRUDE INTO POWER SUPPLY BY MORE THAN .23 (6). 3. WEIGHT: 650 GRAMS. +V +V Fe@ ACL) ACIN) I VOLTAGE ADJUSTMENT 9x M4 COVER REMOTE ON/OFF CONTROL CONNECTOR (OPTION) B2B-XH-A(JS- ++ 3.62 +958 29 a 4x M4 SEE NOTE 2 50.9) Bo) 1 { 1 (i280) 6.791 (172.5) Pox 45 HOLES FOR CUSTOMER AY CHASSIS MOUNTING. C (USE M4 MOUNTING SCREWS.) 5) oad 3x M4 SEE NOTE 2 + (25.0) 2.65 T | 72 3.937 (18.0) (100.0) 779 354 (198.0) (217.0) NOTE: 1. DIMENSIONS ARE IN INCHES EXCEPT DIMENSIONS () ARE IN MM. 2. 7x EMBOSS, TAPPED AND COUNTERSUNK HOLES FOR CUSTOMER MTG. SCREWS MUST NOT PROTRUDE INTO POWER SUPPLY BY MORE THAN .23 (6.0). 3. WEIGHT. 850 GRAMSJWS300 +$ -S_ PC iCNTPF FG NL 4xM5 t0xM FRONT VIEW 5.910 rT 787 (20.0) (150.0) | + MOUNTING SURFACE 7 T] 3.62 (92.0) 4x Ma TAPPED HOLE FOR 60 0) CHASSIS MOUNTING. 7 a SEE NOTE 2 = (BOTH SIDES) 83 + | (21.0) SIDE View q + + | 8 M4 TAPPED HOLE FOR CHASSIS MOUNTING. AIR SEE NOTE 2 2755 FLOW 3.937 472 (70.0) = (100.0) (120.0) q MOUNTING SURFACE + + 98 25.0) ue + + 29 (10.0) 5.91 787 |_ mo) 0.0) a (190.0) we NOTE: 1. DIMENSIONS ARE IN INCHES EXCEPT DIMENSIONS () ARE IN MM. 2. 16x M4 TAPPED HOLES FOR CUSTOMER MOUNTING, SCREWS MUST NOT PROTRUDE INTO P.S. MORE THAN .236 (6MM) 3. CUSTOMER TO PROVIDE ADEQUATE CLEARANCE NEAR VENT HOLES FOR AIR FLOW. 4, WEIGHT: NET 5.0 LBS, SHIPPING 6.0 LBS JwWS600 4xM5 FRONT VIEW 187 362 2.362 (92.0) (60.0) 4x M4. MOUNTING HOLES AIR FLOW J SEE NOTE 2 (BOTH SIDES) 62 ( + + (46.0) MOUNTING SURFACE ft SIDE VIEW 5.905 1.38 4 (150.0) (85.0) > ++ ++ 6.692 (170.0) 7.48 3.937 MOUNTING SURFACE {190.0} (100.0) {J 12xM4_MOUNTING HOLES L. SEE NOTE 2 +_ + _ ++ 177 0) Q | + + & BOTTOM VIEW 3.937 177 _.| (100.0) 30) 300 (160.0) (20-0) NOTES: 1. DIMENSIONS ARE IN INCHES EXCEPT DIMENSIONS ( } ARE (N MM. 2. 12x M4 TAPPED HOLES FOR CUSTOMER MOUNTING, SCREWS MUST NOT PROTRUDE INTO P.S. MORE THAN .236 (GMM) 3. CUSTOMER TO PROVIDE ADEQUATE CLEARANCE NEAR VENT HOLES FOR AIR FLOW. 4. WEIGHT: NET 9.0 LBS, SHIPPING 10.0 LBS. 10 x M4 FRONT AC-DC POWER SUPPLIES 27