BM23FR0.6-40DS-0.35V(895) - HIROSE ELECTRIC

0.35mm Pitch, 0.6 and 0.8mm Height, Board to Board or Board to FPC Connectors

BM23FR Series

■

Features

1. Space-saving design

Compact design ideal for mobile devices (See Fig.1)

●

Pitch : 0.35mm, Width : 1.98mm, Stacking height : 0.6/0.8mm

2. Robust [Breaking Strength : 90N]

Metal guides prevent housing damage due to incorrect

mating. (See Fig.2)

3. Highly reliable contact design

2-point contact design for signal contact ensures high

reliability. (See Fig.3)

4. Good mating operation

Wide self alignment range with metal guides offers

enhanced mating operation.

(0.4mm in pitch direction, 0.35mm in width direction)

Furthermore, a clear tactile click generated by the unique

locking contact design insures complete mating.

Supports USB 3.1 Gen.2 (10Gbps) transmission

Signal contacts support USB3.1 Gen.2 transmission

speed.

■

Environmental

● Halogen-free*

As dened by IEC 61249-2-21

Br : 900ppm max., Cl : 900ppm max.

Br+Cl : 1,500ppm max.

◆Robust design

2018.06 ②

Space-saving

Dimension Example : 24 Pos.

Robust design

Cross-sectional view of mated contact

Metal guide

Receptacle

Header

Narrow width design allows for use in small spaces.

Effective mating length

• BM23FR0.6 : 0.15mm

• BM23FR0.8 : 0.20mm

Breaking Strength

Actually Measured

90 N

Header

contact

Receptacle

contact

Fig.1

Fig.2

Fig.3

Metal guides are designed

to reduce connector damage

even if mated incorrectly.

In cases where the application will demand a high level of reliavility, such as automotive,

please contact a company representative for further information.

Apr.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.

BM23FR Series●0.35mm Pitch, 0.6 and 0.8mm Height, Board to Board or Board to FPC Connectors

■

Product Specifications

Ratings

Rated

current 0.3A Operating

temperature range

-55°C to 85°C

(Note1)

Storage

temperature range

-10°C to 60°C

(Note2)

Rated

voltage 30V AC/DC Operating

humidity range 20% to 80% Storage

humidity range

40% to 70%

(Note2)

Items Specications Conditions

1. Contact resistance 100mΩ

max. Measured at 20mV AC, 1kHz, and 1mA

2. Insulation resistance 50MΩ

min. Measured at 100V DC

3. Withstanding voltage No ashover or insulation breakdown 100V AC for 1 minute

4. Durability Contact resistance: 100mΩ

max. 10 mating cycles

5. Vibration No electrical discontinuity for more than 1μs. Frequency: 10 to 55Hz, single amplitude : 0.75mm

in 3 axis directions for 5 minutes, 10 cycles

6. Shock resistance No electrical discontinuity of 1μs or more. Acceleration : 490m/s2, duration of pulse : 11ms at 3

times for 3 directions

7. Humidity Contact resistance : 100mΩ

max.

Insulation resistance : 25mΩ

min.

96 hours at temperature of 40±2°C and a humidity

range from 90 to 95%

8. Temperature cycle Contact resistance: 100mΩ

max.

Insulation resistance: 50MΩ

min.

-55°C for 30 minutes ➝ 85°C for 30 minutes,

5 cycles

9. Soldering heat

resistance

No dissolution or melting of the resin that will affect

the performance.

Reow: with recommended temperature prole;

Hand soldering at soldering iron temperature of

350°C for 3 seconds max.

Note 1 : Includes temperature rise caused by current ow.

Note 2 : Storage refers to long-term-storage of unused items before they are mounted on the PCB.

Operating temperature/humidity range applies to the state of temporary storage such as non-powered after mounting on the

PCB, and during transportation, etc.

■

Materials / Finish

Product Part Material Finish UL Regulation

Receptacle

Header

Insulator LCP Black UL94V-0

Contact Copper alloy Gold plating ____

Metal Fitting Copper alloy Gold plating ____

■

Product Number Structure

Refer to the chart below when determining the product specications from the product number.

Please select from the product numbers listed in this catalog when placing orders

●Receptacle / Header

Series Name: BM

Connector Type

DS: Receptacle

DP: Header

Series No. : 23 Contact Pitch : 0.35mm

Shape Symbols

FR: With locking metal tting

Terminal type

V : Straight SMT

Stacking Height : 0.6mm, 0.8mm

Gold plated specication and packaging status

(51) : Gold plate thickness 0.05μm

Embossed tape packaging (10,000pcs/reel)

Number of Contacts

BM 23 FR ** - *DS - 0.35 V (***)

(895)

: Gold plate thickness 0.05μm

Embossed tape packaging (1,000pcs/reel)

1 2 3 4 5 6 7 8 9

Apr.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.

BM23FR Series●0.35mm Pitch, 0.6 and 0.8mm Height, Board to Board or Board to FPC Connectors

■

H=0.6mm Receptacle

■

H=0.8mm Receptacle

Recommended PCB layout [H=0.6 mm]

Recommended PCB layout [H=0.8 mm]

Apr.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.

BM23FR Series●0.35mm Pitch, 0.6 and 0.8mm Height, Board to Board or Board to FPC Connectors

Unit : mm

Part No. HRS No. No. of contacts A B C D

BM23FR0.6-6DS-0.35V(***) 480-0287-0 ** 6 3.55 0.70 2.11 1.08

BM23FR0.6-8DS-0.35V(***) 480-0360-0 ** 8 3.90 1.05 2.46 1.43

BM23FR0.6-10DS-0.35V(***) 480-0258-0 ** 10 4.25 1.40 2.81 1.78

BM23FR0.6-12DS-0.35V(***) 480-0371-0 ** 12 4.60 1.75 3.16 2.13

BM23FR0.6-16DS-0.35V(***) 480-0295-0 ** 16 5.30 2.45 3.86 2.83

BM23FR0.6-20DS-0.35V(***) 480-0272-0 ** 20 6.00 3.15 4.56 3.53

BM23FR0.6-24DS-0.35V(***) 480-0260-0 ** 24 6.70 3.85 5.26 4.23

BM23FR0.6-30DS-0.35V(***) 480-0327-0 ** 30 7.75 4.90 6.31 5.28

BM23FR0.6-34DS-0.35V(***) 480-0274-0 ** 34 8.45 5.60 7.01 5.98

BM23FR0.6-40DS-0.35V(***) 480-0390-0 ** 40 9.50 6.65 8.06 7.03

BM23FR0.6-50DS-0.35V(***) 480-0382-0 ** 50 11.25 8.40 9.81 8.78

Part No. HRS No. No. of contacts A B C

BM23FR0.8-10DS-0.35V(***) 480-0298-0 ** 10 4.25 1.40 2.81

BM23FR0.8-18DS-0.35V(***) 480-0469-0 ** 18 5.65 2.80 4.21

BM23FR0.8-60DS-0.35V(***) 480-0300-0 ** 60 13.00 10.15 11.56

Note 1 : Please place orders in full reel quantities.

Note 2 : This connector has no polarity.

Note 3 : The specication number(895) in the Part No. changes to(95) in the HRS No.

Recommended metal mask dimensions (mask thickness : 100µm)

[0.6mm and 0.8mm common]

Apr.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.

BM23FR Series●0.35mm Pitch, 0.6 and 0.8mm Height, Board to Board or Board to FPC Connectors

■

H=0.6mm Header

■

H=0.8mm Header

Recommended PCB layout [H=0.6mm]

Recommended PCB layout [H=0.8mm]

Apr.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.

BM23FR Series●0.35mm Pitch, 0.6 and 0.8mm Height, Board to Board or Board to FPC Connectors

Unit : mm

Part No. HRS No. No. of contacts A B C D E

BM23FR0.6-6DP-0.35V(***) 480-0286-0 ** 6 2.75 0.70 2.00 1.41 3.55

BM23FR0.6-8DP-0.35V(***) 480-0361-0 ** 8 3.10 1.05 2.35 1.76 3.90

BM23FR0.6-10DP-0.35V(***) 480-0257-0 ** 10 3.45 1.40 2.70 2.11 4.25

BM23FR0.6-12DP-0.35V(***) 480-0364-0 ** 12 3.80 1.75 3.05 2.46 4.60

BM23FR0.6-16DP-0.35V(***) 480-0290-0 ** 16 4.50 2.45 3.75 3.16 5.30

BM23FR0.6-20DP-0.35V(***) 480-0273-0 ** 20 5.20 3.15 4.45 3.86 6.00

BM23FR0.6-24DP-0.35V(***) 480-0259-0 ** 24 5.90 3.85 5.15 4.56 6.70

BM23FR0.6-30DP-0.35V(***) 480-0328-0 ** 30 6.95 4.90 6.20 5.61 7.75

BM23FR0.6-34DP-0.35V(***) 480-0275-0 ** 34 7.65 5.60 6.90 6.31 8.45

BM23FR0.6-40DP-0.35V(***) 480-0391-0 ** 40 8.70 6.65 7.95 7.36 9.50

BM23FR0.6-50DP-0.35V(***) 480-0383-0 ** 50 10.45 8.40 9.70 9.11 11.25

Part No. HRS No. No. of contacts A B C D EF

BM23FR0.8-10DP-0.35V(***) 480-0297-0 ** 10 3.45 1.40 2.70 2.11 3.41 4.25

BM23FR0.8-18DP-0.35V(***) 480-0468-0 ** 18 4.85 2.80 4.10 3.51 4.81 5.65

BM23FR0.8-60DP-0.35V(***) 480-0299-0 ** 60 12.20 10.15 11.45 10.86 12.16 13.00

Note 1 : Please place orders in full reel quantities.

Note 2 : This connector has no polarity.

Note 3 : The specication number(895) in the Part No. changes to(95) in the HRS No.

Recommended metal mask dimensions (mask thickness : 100µm)

[0.6mm and 0.8mm common]

Apr.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.

BM23FR Series●0.35mm Pitch, 0.6 and 0.8mm Height, Board to Board or Board to FPC Connectors

Unit : mm

Part No. HRS No.

No. of contacts

A B C D EF G H I

BM23FR0.6-6DS-0.35V(***) 480-0287-0 ** 6 12 5.5 3.66 0.25 0.8 2.07 13.5 17.5 330

BM23FR0.6-8DS-0.35V(***) 480-0360-0 ** 8 12 5.5 4.01 0.25 0.8 2.07 13.5 17.5 330

BM23FR0.6-10DS-0.35V(***)480-0371-0 ** 10 16 7.5 4.36 0.25 0.8 2.07 17.5 21.5 380

BM23FR0.6-12DS-0.35V(***)480-0295-0 ** 12 16 7.5 4.71 0.25 0.8 2.07 17.5 21.5 330

BM23FR0.6-16DS-0.35V(***)480-0272-0 ** 16 16 7.5 5.41 0.25 0.8 2.07 17.5 21.5 330

BM23FR0.6-20DS-0.35V(***)480-0260-0 ** 20 16 7.5 6.11 0.25 0.8 2.07 17.5 21.5 380

BM23FR0.6-24DS-0.35V(***)480-0327-0 ** 24 16 7.5 6.81 0.25 0.8 2.07 17.5 21.5 380

BM23FR0.6-30DS-0.35V(***)480-0274-0 ** 30 24 11.5 7.86 0.25 0.8 2.07 25.5 29.5 330

BM23FR0.6-34DS-0.35V(***)480-0390-0 ** 34 24 11.5 8.56 0.25 0.8 2.07 25.5 29.5 380

BM23FR0.6-40DS-0.35V(***)480-0382-0 ** 40 24 11.5 9.61 0.25 0.8 2.07 25.5 29.5 330

BM23FR0.6-50DS-0.35V(***)480-0371-0 ** 50 24 11.5 11.36 0.25 0.8 2.07 25.5 29.5 330

Part No. HRS No.

No. of contacts

A B C D EF G H I

BM23FR0.8-10DS-0.35V(***) 480-0298-0 ** 10 16 7.5 4.36 0.3 1.0 2.07 17.5 21.5 330

BM23FR0.8-18DS-0.35V(***) 480-0469-0 ** 18 16 7.5 5.76 0.3 1.0 2.07 17.5 21.5 330

BM23FR0.8-60DS-0.35V(***) 480-0300-0 ** 60 24 11.5 13.11 0.3 1.0 2.07 25.5 29.5 330

Note 1 : The specication number(895) in the Part No. changes to(95) in the HRS No.

Embossed Tape Dimensions (IEC 602286-3, with JIC C 0806)

●Receptacle

●Reel Dimensions

▶10,000pcs/reel ▶1,000pcs/reel

Un-reeling direction

Apr.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.

BM23FR Series●0.35mm Pitch, 0.6 and 0.8mm Height, Board to Board or Board to FPC Connectors

Unit : mm

Part No. HRS No.

No. of contacts

A B C D EF G H I

BM23FR0.6-6DP-0.35V(***) 480-0286-0 ** 6 12 5.5 2.85 0.25 0.65 1.58 13.5 17.5 330

BM23FR0.6-8DP-0.35V(***) 480-0361-0 ** 8 12 5.5 3.20 0.25 0.65 1.58 13.5 17.5 330

BM23FR0.6-10DP-0.35V(***) 480-0257-0 ** 10 12 5.5 3.55 0.25 0.65 1.64 13.5 17.5 380

BM23FR0.6-12DP-0.35V(***) 480-0364-0 ** 12 12 5.5 3.90 0.25 0.65 1.64 13.5 17.5 330

BM23FR0.6-16DP-0.35V(***) 480-0290-0 ** 16 16 7.5 4.60 0.25 0.65 1.64 17.5 21.5 330

BM23FR0.6-20DP-0.35V(***) 480-0273-0 ** 20 16 7.5 5.30 0.25 0.65 1.64 17.5 21.5 380

BM23FR0.6-24DP-0.35V(***) 480-0259-0 ** 24 16 7.5 6.00 0.25 0.65 1.64 17.5 21.5 380

BM23FR0.6-30DP-0.35V(***) 480-0328-0 ** 30 16 7.5 7.05 0.25 0.65 1.64 17.5 21.5 330

BM23FR0.6-34DP-0.35V(***) 480-0275-0 ** 34 16 7.5 7.75 0.25 0.65 1.64 17.5 21.5 380

BM23FR0.6-40DP-0.35V(***) 480-0391-0 ** 40 24 11.5 8.80 0.25 0.65 1.64 25.5 29.5 330

BM23FR0.6-50DP-0.35V(***) 480-0383-0 ** 50 24 11.5 10.55 0.25 0.65 1.64 25.5 29.5 330

Part No. HRS No.

No. of contacts

A B C D EF G H I

BM23FR0.8-10DP-0.35V(***) 480-0297-0 ** 10 12 5.5 3.55 0.3 0.78 1.64 13.5 17.5 330

BM23FR0.8-18DP-0.35V(***) 480-0468-0 ** 18 16 7.5 4.95 0.3 0.78 1.64 17.5 21.5 330

BM23FR0.8-60DP-0.35V(***) 480-0299-0 ** 60 24 11.5 12.30 0.3 0.78 1.64 25.5 29.5 330

Note 1 : The specication number (895) in the Part No. changes to (95) in the HRS No.

Embossed Tape Dimensions (IEC 602286-3, with JIC C 0806)

●Header

●Reel Dimensions

▶10,000pcs/reel ▶1,000pcs/reel

Un-reeling direction

Apr.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.

BM23FR Series●0.35mm Pitch, 0.6 and 0.8mm Height, Board to Board or Board to FPC Connectors

Precautions

1. Recommended solder

temperature prole

BM29 Series Ultra-small, power/signal contact design for Board-to-Board/FPC-to-Board providing 3A max current

Precautions

1. Recommended

temperature proﬁ le

Note 1 : The temperature is the surface temperature of the PCB in the vicinity of the connector

lead part.

Note 2 : When you use nitrogen reﬂ ow, please mount the product with the oxygen concentration

at a minimum of 1,000 [ppm].

Please contact us if the concentration is below 1,000 [ppm].

2. Recommended hand

soldering conditions

Soldering iron temperature : 340 ± 10°C,

Soldering time : within 3 seconds

3. Recommended screen

thickness/aperture ratio

(pattern area ratio)

Thickness : 0.1mm

Aperture ratio : 100% on the DS side ; 80% on the DP side

4. Warpage of the PCB A maximum of 0.02mm at the center part of the connector based on both ends of the connector.

5. Cleaning Not recommended. If you clean this product, please evaluate the performance before using it.

(Cleaning may cause a change in the mating/unmating property and its resistance to

environment)

6. Notes Care should be taken that mating/unmating operation when the product is not mounted on the

PCB could cause damage or deformation, etc. of the contact.

Avoid supporting the PCB only by connectors, and support it by other means than connectors.

Care should be taken that excessive prying mating/unmating could cause damage.

During hand soldering, do not apply ﬂ ux which will cause ﬂ ux oozing on connector.

This product may differ in hue due to production lot variability, but it doesn’t have any

inﬂ uence on the performance.

Please refer to the next page for the precautions for mating/unmating.

Considering the possibility of disengagement due to the counterforce caused by the drop, impact

and routing of FPC, ﬁ x the mated state by the use of housings and cushion materials, etc.

Caution! Do not use the connector in non-recommended conditions (i.e., rated current, rated

voltage, PCB design and operating environment, etc.). Such usage could lead to material

outgassing, ignition, or short-circuit, etc.

Refer to the speciﬁ cations and the guidelines for board pattern dimensions, board cautions,

and connector treatment.

Pleasae contact Hirose if using the connector under conditions other than those described in

the speciﬁ cations and the guidelines is being considered.

[Conditions]

1. Peak temperature : 250ç

2. Heating unit : No less than 220ç for no more than 60 seconds

3. Preheating unit : 150 to 180ç for 90 to 120 seconds

4. Number of times : No more than 2 times

MAX 250℃

Start

Time (seconds)

25℃

Max. 60 seconds

）sdnoces 06（

90 to 120 seconds

Preheating time

Soldering time

100

150 150℃

180℃

220℃

200

180

250

220

Temperature（℃）

[Conditions]

1. Peak temperature : Maximum of 250℃

2. Heat section : 220℃ min., within 60 seconds

3. Preheat section : 150 to 180℃, 90 to 120 seconds

4. Number of reow cycles : Maximum of 2 cycles

Note 1 : The temperature is the surface temperature of the PCB in the vicinity of the connector

lead part.

Note 2 : When using nitrogen reow process, please mount the product with the oxygen

concentration at a minimum of 1,000[ppm].

Please contact Hirose if the concentration is below 1,000 [ppm].

2. Recommended manual

soldering conditions

Soldering iron temperature: 340±10℃

Soldering time : within 3 seconds

3. Recommended screen

thickness and open area

ratio to PCB pattern area

Thickness : 0.1mm

Aperture ratio : 100% on the DS side, 100% on the DP side

4. Warpage of the PCB A maximum of 0.02mm at the center part of the connector based on both ends of the connector.

5. Cleaning Not recommended. If this product is cleaned, please evaluate the performance before using

it. Cleaning may cause a change in the mating/unmating properties as well as environmental

resistance.

6. Notes

■Care sholud be taken when mating/unmating the connector and when it is not

mounted on the PCB. Damage or deformation of the contacts may occur.

■Avoid supporting the PCB only with the connectors. Support it by other means such as

bolts, screws, posts, etc.

■Care should be taken to avoid excessive prying mating/unmating that could cause

damage.

■During manual soldering, do not apply flux which will cause flux oozing on connector.

■This product may have slight color differences due to production lot variability, but this

does not have any effect on the performance.

■Please refer to the next page for precautions regarding mating/unmating.

■Because the product can disengage if dropped (or other impact), and by FPC

routing, it is advised to secure the mated connectors to the board with housings and

cushioning materials.

■Caution! Do not use the connector in non-recommended conditions (i.e., rated

current, rated voltage, PCB design and operating environment, etc.). Such usage

could lead to material outgassing, ignition, or short-circuit, etc.

Refer to the specifications and the guidelines for board pattern dimensions, board

cautions, and connector treatment.

Please contact Hirose if using the connector under conditions other than those

described in the specifications and the guidelines is being considered.

Apr.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.

BM23FR Series●0.35mm Pitch, 0.6 and 0.8mm Height, Board to Board or Board to FPC Connectors

●Handle with care when mating a connector

Alignment method

When aligning, look for the guide port without

applying excessive force.

Caution! If excessive force is applied, the

connector could crack or be shaved which

could lead to a defect in contact resistance.

Guiding condition

Mated condition

When guided, the connectors are aligned

parallel to each other with longitudinal and

lateral movements restricted. Mate them

parallel to each other.

BM23FR**-*DP-0.35V

BM23FR**-*DS-0.35V

BM23FR Series●0.35mm Pitch, 0.6 and 0.8mm Height, Board to Board or Board to FPC Connectors

●Handle with care when un-mating connectors

OK Un-mate connectors parallel to each other.

If the connector cannot be un-mated parallel, it can be removed

diagonally from the pitch direction, as shown in the left gure.

However, the connector can be broken if the FPC is not rigid.

Please conrm rigidity of the FPC at the time of trial production.

NG Do not pull from the corner. If it is pulled from the corner as

shown in the left gure, the contact and connector could be

damaged.

Please provide a reinforcing plate for the FPC.

If the rigidity of the FPC is not sufcient, the connector may

break as shown in the left gure. Please check the action of the

FPC to be used repeatedly.

A reinforcing plate of 0.3mm or thicker made of glass epoxy

material, or 0.2mm or thicker stainless steel is recommended

Pitch direction

Corner direction

BM23FR Series●0.35mm Pitch, 0.6 and 0.8mm Height, Board to Board or Board to FPC Connectors

DF22 Series●7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)

The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.

The contents of this catalog are current as of date of 02/2018. Contents are subject to change without notice for the purpose of improvements.

2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN

TEL: +81-45-620-3526 Fax: +81-45-591-3726

http://www.hirose.com

http://www.hirose-connectors.com

USA:

HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE

2841 Junction Ave, Suite 200

San Jose, CA. 95134

Phone : +1-408-253-9640

Fax : +1-408-253-9641

http://www.hirose.com/us/

USA:

HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE)

17197 N. Laurel Park Drive, Suite 253,

Livonia, MI 48152

Phone : +1-734-542-9963

Fax : +1-734-542-9964

http://www.hirose.com/us/

USA:

HIROSE ELECTRIC (U.S.A.), INC. BOSTON OFFICE

300 Brickstone Square Suite 201,

Andover, MA 01810

Phone : +1-978-662-5255

USA:

HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS CHICAGO OFFICE

2300 Warrenville Road, Suite 150,

Downers Grove, IL 60515

Phone : +1-630-282-6700

http://www.hirose.com/us/

CHINA:

HIROSE ELECTRIC (CHINA) CO., LTD. SHENZHEN BRANCH

Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre,

5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008

Phone : +86-755-8207-0851

Fax : +86-755-8207-0873

http://www.hirose.com/cn/

KOREA:

HIROSE KOREA CO.,LTD.

143, Gongdan 1-daero, Siheung-si,

Gyeonggi-do, 15084, Korea

Phone : +82-31-496-7000

Fax : +82-31-496-7100

http://www.hirose.co.kr/

GERMANY:

HIROSE ELECTRIC EUROPE B.V. NUREMBERG OFFICE

Neumeyerstrasse 22-26, 90411 Nurnberg

Phone : +49-911 32 68 89 63

Fax : +49-911 32 68 89 69

http://www.hirose.com/eu/

GERMANY:

HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE

Bayernstr. 3, Haus C 30855 Langenhagen, Germany

Phone : +49-511 97 82 61 30

Fax : +49-511 97 82 61 35

http://www.hirose.com/eu/

GERMANY:

HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH

Schoenbergstr. 20, 73760 ostfildern

Phone : +49-711-456002-1

Fax : +49-711-456002-299

http://www.hirose.com/eu/

FRANCE:

HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE

130 Avenue Joseph Kessel, Bat E, 78960

Voisins le Bretonneux, France

Phone : +33-1-85764886

Fax : +33-1-85764823

http://www.hirose.com/eu/

THE NETHERLANDS:

HIROSE ELECTRIC EUROPE B.V.

Hogehillweg #8 1101 CC Amsterdam Z-O

Phone : +31-20-6557460

Fax : +31-20-6557469

http://www.hirose.com/eu/

UNITED KINGDOM:

HIROSE ELECTRIC EUROPE BV (UK BRANCH)

4 Newton Court, Kelvin Drive, Knowlhill,

Milton Keynes, MK5 8NH

Phone : +44-1908 202050

Fax : +44-1908 202058

http://www.hirose.com/eu/

CHINA:

HIROSE ELECTRIC (CHINA) CO., LTD. (SHANGHAI, HEADQUARTERS)

18, Enterprise Center Tower 2, 209# Gong He

Road, Jing’an District, Shanghai, CHINA 200070

Phone : +86-21-6391-3355

Fax : +86-21-6391-3335

http://www.hirose.com/cn/

CHINA:

HIROSE ELECTRIC (CHINA) CO.,LTD. BEIJING BRANCH

A1001, Ocean International Center, Building 56# East 4th

Ring Middle Road, ChaoYang District, Beijing, 100025

Phone : +86-10-5165-9332

Fax : +86-10-5908-1381

http://www.hirose.com/cn/

TAIWAN:

HIROSE ELECTRIC TAIWAN CO., LTD.

103 8F, No.87, Zhengzhou Rd., Taipei

Phone : +886-2-2555-7377

Fax : +886-2-2555-7355

http://www.hirose.com/tw/

HONG KONG:

HIROSE ELECTRIC HONGKONG TRADING CO., LTD.

Room 1001, West Wing, Tsim Sha Tsui Centre, 66

Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong

Phone : +852-2803-5338

Fax : +852-2591-6560

http://www.hirose.com/hk/

INDIA:

HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE

Office NO.552, Regus-Green Boulevard, Level5, Tower C,

Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India

Phone : +91-12-660-8018

Fax : +91-120-4804949

http://www.hirose.com/sg/

SINGAPORE:

HIROSE ELECTRIC SINGAPORE PTE. LTD.

03, Anson Road, #20-01, Springleaf Tower,

Singapore 079909

Phone : +65-6324-6113

Fax : +65-6324-6123

http://www.hirose.com/sg/

INDIA:

HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE

Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma

Gandhi (MG) Road, Bangalore 560 001, Karnataka, India

Phone : +91-80-4120 1907

Fax : +91-80-4120 9908

http://www.hirose.com/sg/

MALAYSIA:

PENANG REPRESENTATIVE OFFICE

73-3-1, Ideal@The One, Jalan Mahsuri, Bayan

Lepas Penang, 11950, Malaysia

Phone : +604-648-5536

http://www.hirose.com/sg/

THAILAND:

BANGKOK OFFICE (REPRESENTATIVE OFFICE)

Unit 4703, 47th FL., 1 Empire Tower, South Sathorn

Road, Yannawa, Sathorn, Bangkok 10120 Thailand

Phone : +66-2-686-1255

Fax : +66-2-686-3433

http://www.hirose.com/sg/

The characteristics and the specications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.

The contents of this catalog are current as of date of 06/2018. Contents are subject to change without notice for the purpose of improvements.