Analog Sensors
BAW M18MI-UAC50B-S04G
M 18
Sl = 1...5 mm
0...10V
shielded
Approvals
Utilization categories DC 13
Insulation class II
If not differently indicated,
all values by IEC 947-5-2
(DIN EN60947-5-2)
Specificati ons sub je ct to chang e
Common Data
Mounting in steel shielded
Linearity range Sl mm 1...5
Rated operating distance Se mm 4
Repeat accuracy ± 8 µm
Limit frequency (-3dB) 500 Hz
Measuring velocity ≤40 m/s
Response time 1 ms
Temperatur e coe f fi cient TK typ. -2 µm/K
in optimized range min.
+1 µm/K
from +10...+50°C max. -8 µm/K
Max. non-linearity % ±3% from Ua max.
Adjusting indic a tio n
j
a
Ambient temperature range °C -10...+70
Time delay before availability ms <1ms
Mechanical Data
Housing size mm cyl. M 18
Measurements BxHxT or DxT mm M18x1 x 65
Housing material CuZn nickel plated
Material of sensing face PBT
Degree of protection IP IP67
Connection Connector S4
Recommended connector BKS-S19-1/BKS-S20-1
Electrical Data
Current type DC
Wiring 3-Wire
Output signal 0...10V
Rated opera tio nal voltage V 24 DC
Rated insulation voltage Ui V 250 V AC
Ripple % <= 15% from Ue
Output resistance >2kOhm
No-load supply current mA <= 10
Short circuit protection yes
Protected against polarity rev
yes
Balluff GmbH
Postfach 1160
73761 Neuhausen
Telefon (07158) 173-0
Telefax (07158) 5010
07.07.2005 / Online-Information
