HPL HALL EFFECT LINEAR OUTPUT PUSHBUTTONS LINEAR OUTPUT PUSHBUTTONS PROVIDES 10 MILLION LINEAR OUTPUT CYCLES USING CONTACTLESS HALL EFFECT TECHNOLOGY HALL EFFECT The HPL Series is a revolutionary new switch utilizing Hall Effect technology to provide the user an output proportional to the travel of the button. Available IP68 with seal, the HPL delivers 10,000,000 actuations. This rugged switch is ideal for applications where a simple On/Off control is insufficient, and a linear output is desired. Using the HPL, an operator can control the motion of a device as well as the speed of the movement. The HPL switch is an ideal control device for valves and variable speed drives, and can be used in industrial control, heavy equipment, and material handling applications. The HPL is offered as a stand-alone switch and in a dual HPL rocker assembly. As with all OTTO switches, a wide variety of case and button styles and colors are offered, along with various termination styles and two levels of sealing. OTTO can also provide custom configurations as well as provide the HPL switches installed in a control grip. Quality Features: * Programmable outputs of .5 to 4.5 volts * 10 million cycle performance * Hall Effect for reliable contactless switching Rocker Assembly Using 2 HPL's * Can be sealed watertight per IP68 * Front or behind panel mounting * Choice of termination styles * Rocker version available HPL Part Number Code HPLCase Style 1. Press Fit 3. Front Mount 5/8" Thread 4. Rear Mount 15/32" Thread 6. Rear Mount 5/8" Thread R. Rocker Assembly X Output Terminal Style 1. 2. 3. 4. 1. 3 Pin .025 SQ Pins, .100 Centers 2. 18" Potted 22AWG Wire Leads 1-4V 4-1V .5-4.5V 4.5-.5V Specifications Subject To Change Without Notice X X X Seal Level 1. IP65 Splashproof 2. IP68S Watertight X X X Case Color 1. Clear Anodize 2. Black Anodize Button Color 1. 2. 3. 4. 5. 6. 7. 8. 9. Red Black Orange Yellow Green Blue Purple Grey White Button Style 1. .375" OD (Case Styles 1, 3, 4, & 6) 2. .500" OD Domed (Case Styles 1, 3, & 6) R. Rocker Assembly (Case Style R) Consult factory for availablity of larger button diameters. www.ottoexcellence.com 19 HPL LINEAR OUTPUT PUSHBUTTONS HALL EFFECT LINEAR OUTPUT PUSHBUTTONS PROVIDES 10 MILLION LINEAR OUTPUT CYCLES USING CONTACTLESS HALL EFFECT TECHNOLOGY Case Styles Linear Output Graphs (Vcc=5V@20C) HPL-1 Press Fit HPL-3 5/8" Thread Front Mount Button Style 1 HPL-3 5/8" Thread Front Mount Dome Button Button Style 2 HPL-4 15/32" Thread Rear Mount HPL-6 5/8" Thread Rear Mount HPL-R HPL dimensions are equivalent to standard OTTO P1 pushbutton dimensions as shown in the catalog except for overall length. Total button height is .25" on standard .375" O.D. buttons. Overall length from button top to rear of potting is 1.26" nominal, except for the HPL-4 and .500 O.D. button styles which measures 1.56". Panel mounting hardware is included, except with the HPL-1 which is meant to press-fit into mounting hole in a control grip. Refer to the dimensions shown or consult OTTO to design the control grip to meet your specifications. R .110 (2) .830 HPL-R* Rocker .710 HPL-R * Contact Factory For Alternative Bracket Styles & External Boot Options. Standard Characteristics/Ratings: OPERATIONAL: 10,000,000 cycles Seal Options: IP64 & IP68 Temperature Range: -40C to +85C Button Travel: .14 to .16 inches Operating Force: 2.0 .0.2 lbs. Vcc +(Red) 4700 pF Output o(Yellow) 4700 pF Mechanical Life: HPL GND -(Black) Schematic MATERIALS: Button: Thermoplastic Case: Black anodized aluminum alloy ELECTRICAL: Supply Voltage: 4.5VDC to 5.5 VDC max. Supply Current: 10 mA max. Continuous Current Output: 1 mA max. Reverse Voltage Protection: -5V max. 20 OTTO 2007 Full Line Catalog HPL Specifications Subject To Change Without Notice