Part Number 856717 1960 MHz SAW Delay Line Data Sheet Features * * * * * * * For BTS Power Amplifier applications Usable bandwidth of 100 MHz Absolute delay of 450ns Low group delay variation Ceramic Surface Mount Package (SMP) Hermetic RoHS compliant (2002/95/EC), Pb-free Pb Package Pin Configuration Surface Mount 7.01 x 5.51 x 1.63 mm SMP-28B Bottom View 1 0.76 1.63 NOM. 1.78 MAX. 2 3 12 4 11 5 10 6 7.01 1.27 9 1.70 7 Single-ended Configuration Pin No. Description 10 Input 4 Output 1,2,5,7,8,11 Case Ground 3,6,9,12 Ground 1.27 5.51 0.79 8 1.14 Dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width 0.13mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2 - 6m Ni plating Subject to change or obsolescence without notice Rev A 02/08 (c) TriQuint Semiconductor Page 1 of 5 Part Number 856717 1960 MHz SAW Delay Line Data Sheet Electrical Specifications (1) Operating Temperature Range: (2) -35 to +85 C Parameter (3) Minimum Typical (4) Maximum Unit - 1960 - MHz 1990 22 23 1884 2013 26 27 1930 - dB dB MHz MHz - 0.4 0.5 0.8 1.2 dB p-p dB p-p 445 3 4 450 7.0 8.0 455 degree degree ns - 24 40 ns p-p - 3.4 5.0:1 - - 2.1 50 50 5.0:1 - Center Frequency Minimum Insertion Loss +25 C -35 to +85 C Lower 1.2 dB Bandedge (5) Upper 1.2 dB Bandedge (5) Amplitude Variation 1950 - 1970 MHz 1930 - 1990 MHz Phase Linearity 1950 - 1970 MHz 1930 - 1990 MHz Absolute Group Delay Group Delay Variation 1930 - 1990 MHz Input VSWR 1950 - 1970 MHz Output VSWR 1950 - 1970 MHz Source Impedance (single-ended) (6) Load Impedance (single-ended) (6) Notes: 1. All specifications are based on the TriQuint test circuit shown below 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. Relative to minimum insertion loss 6. This is the optimum impedance in order to achieve the performance shown Test Circuit: Actual matching values may vary due to PCB layout and parasitics 3.6nH 4.3nH 10 50 Single-ended Input 50 Subject to change or obsolescence without notice 4 0.5pF 1.5pF 1,2,3,5,6,7 8,9,11,12 Rev A 02/08 50 (c) TriQuint Semiconductor 50 Single-ended Output Page 2 of 5 Part Number 856717 1960 MHz SAW Delay Line Data Sheet Typical Performance (at room temperature) Subject to change or obsolescence without notice Rev A 02/08 (c) TriQuint Semiconductor Page 3 of 5 Part Number 856717 1960 MHz SAW Delay Line Data Sheet Matching Schematics Actual matching values may vary due to PCB layout and parasitics 3.6nH 4.3nH 10 50 Single-ended Input 4 50 1,2,3,5,6,7 8,9,11,12 Marking PCB Footprint 1.34 TriQuint 856717 XXXXXX ID dot 50 Single-ended Output 50 0.5pF 1.5pF .28 .99 1.34 .28 Date code 5.71 .99 7.21 The date code consists of: day of the current year (Julian, 3 digits), last digit of the year (1 digit) and hour (2 digits) This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel 16.8 2.7 ID dot O330 4.0 0.3 2.0 O1.5 A 1.75 7.5 16.0 7.3 O102 Direction of travel O20.2 O13.0 2.0 2.2 5.8 8.0 O1.5 A Section A-A Dimensions shown are nominal in millimeters Packaging quantity: 3000 units/reel Subject to change or obsolescence without notice Rev A 02/08 (c) TriQuint Semiconductor Page 4 of 5 Part Number 856717 1960 MHz SAW Delay Line Data Sheet Maximum Ratings Parameter Operating Temperature Range Storage Temperature Range Symbol Minimum Maximum T Tstg -35 -40 +85 +85 Unit o C C o Important Notes Warnings * * Electrostatic Sensitive Device (ESD) Avoid ultrasonic exposure RoHS Compliance * This product complies with EU directive 2002/95/EC (RoHS) Pb Solderability * Compatible with JESD22-B102, Pb-free process, 260C peak reflow temperature (see soldering profile) Links to Additional Technical Information PCB Layout Tips Qualification Flowchart S-Parameters Soldering Profile RoHS Information Other Technical Information TriQuint's liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. TriQuint does not accept any liability for applications, processes, circuits or assemblies, which are implemented using any TriQuint component described in this data sheet. Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Subject to change or obsolescence without notice Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: info-product@tqs.com Web: www.triquint.com Rev A 02/08 Or contact one of our worldwide Network of sales offices, Representatives or distributors (c) TriQuint Semiconductor Page 5 of 5