Three-Way Power Dividers,
1 - 100 MHz and 50 - 300 MHz
Rev. V3
M3H-50 / M3V-50
1
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
1
Features
ï‚· Ideal for High Density Packaging
ï‚· High Isolation
ï‚· VSWR: 1.3:1 Max.
ï‚· Impedance: 50 Ohms Nominal
ï‚· Maximum Power Rating or Input Power: 1 Watt
Max.
ï‚· Internal Load Dissipation: 0.05 Watts Max.
ï‚· MIL-STD-202 Screening Available
Description
A Power Divider is ideally a lossless reciprocal
device which can also perform vector summation of
two or more signals and thus is sometimes called a
power combiner or summer.
Pin Configuration
Pin No. Function Pin No. Function
P1 Out P3 Out
P2 In P4 Out
M3H-50 Electrical Specifications1: TA = -55°C to +85°C
Parameter Test Conditions Frequency Units Min Typ Max
Frequency — 1 - 100 MHz — — —
Insertion Loss Less Coupling 1 - 100 MHz dB — — 0.5
Isolation — 1 - 100 MHz dB 30 — —
Amplitude Balance — 1 - 100 MHz dB — — 0.2
Phase Balance — 1 - 100 MHz ° — — 1.0
VSWR — 1 - 100 MHz Ratio — — 1.3:1
M3V-50 Electrical Specifications1: TA = -55°C to +85°C
Parameter Test Conditions Frequency Units Min Typ Max
Frequency — 50 - 300 MHz MHz — — —
Insertion Loss Less Coupling 50 - 300 MHz dB — — 0.75
Isolation — 50 - 300 MHz dB 25 — —
Amplitude Balance — 50 - 300 MHz dB — — 0.2
Phase Balance — 50 - 300 MHz ° — — 2.0
VSWR — 50 - 300 MHz Ratio — — 1.3:1
1. All specification apply with 50 ohm source and load impedance.
Three-Way Power Dividers,
1 - 100 MHz and 50 - 300 MHz
Rev. V3
M3H-50 / M3V-50
2
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
2
Typical Performance Curves
Isolation - Ports 1 - 3
Insertion Loss - Ports 2 - 3, 2 - 1
VSWR Ordering Information
Part Number Package
M3H-50 PIN TO-5-2
M3V-50 PIN TO-5-2
Three-Way Power Dividers,
1 - 100 MHz and 50 - 300 MHz
Rev. V3
M3H-50 / M3V-50
3
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
3
M/A-COM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
