TAK CHEONG SEM IC O N DU C TO R 500 mW LL-34 Hermetically Sealed Glass - High Voltage Switching Diodes Absolute Maximum Ratings Symbol Parameter VRRM Maximum Repetitive Reverse Voltage TSTG Storage Temperature Range TJ IF (AV) IFSM SURFACE MOUNT LL34 TA = 25C unless otherwise noted Value Units 250 V -65 to +200 C Operating Junction Temperature 200 C Average Rectified Forward Current Non-repetitive Peak Forward Current Pulse Width = 1.0 Second Pulse Width = 1.0 second 200 mA 1.0 4.0 A A DEVICE MARKING DIAGRAM These ratings are limiting values above which the serviceability of the diode may be impaired. Thermal Characteristics Symbol PD RJA Cathode Band Color : Black Parameter Value Units Power Dissipation 500 mW Thermal Resistance, Junction to Ambient 350 C/W Specification Features: LL-34 (Mini-MELF) Package Surface Device Type Mounting Hermetically Sealed Glass Cathode Compression Bonded Construction Anode All external surfaces are corrosion resistant and terminals are readily solderable st 1 band indicates negative polarity Electrical Characteristics Symbol BV IR ELECTRICAL SYMBOL TA = 25C unless otherwise noted Parameter Breakdown Voltage Reverse Leakage Current VF Forward Voltage TRR Reverse Recovery Time Test Condition Limits Unit Min Max 60 --- Volts TCBAV101 120 --- Volts TCBAV102 200 --- Volts TCBAV103 250 --- Volts TCBAV100 IR=100A TCBAV100 VR=50V --- 100 nA TCBAV101 VR=100V --- 100 nA TCBAV102 VR=150V --- 100 nA TCBAV103 VR=200V --- 100 nA IF=100mA --- 1.0 Volts --- 50 nS --- 5.0 pF IF=IR=30mA RL=100 IRR=3mA C Capacitance VR=0V, f=1MHZ July 2005 / B Page 1 TCBAV100/TCBAV101/TCBAV102/TCBAV103 (R) (R) TAK CHEONG SEM IC O N DU C TO R Electrical Symbol Definition Symbol Typical Characteristics I Parameter (mA) IF BV Breakdown Voltage @ IR IR Reverse Leakage Current @ VR BV VR Reverse Voltage IF Forward Current VF Forward Voltage @ IF (V) (mV) VR IR VF V IR (nA) (A) Ordering Information Device Pack Option Package Quantity TCBAVxxx 7" Reel Tape and Reel 2,500 TCBAVxxxR13 13" Reel Tape and Reel 10,000 TCBAVxxx Others (...contact Tak Cheong sales representatives) LL34 (Mini-MELF) Tape Packaging Standards This standard practices for surface-mount tape packaging of leadless (Mini-MELF) components meets the requirements of EIA Standard RS-481-A. July 2005 / B Page 2 (R) TAK CHEONG SEM IC O N DU C TO R LL-34 (Mini-MELF) Tape & Reel Packaging Information LL-34 Packaging Outline Packaging Description: Label Antistatic Cover Tape Static Dissipative Embossed Carrier Tape LL34 parts are shipped in tape and reel. The carrier tape is made from a dissipative (carton filled) polycarbonate resin. The cover tape is a multiplayer film (Heat Activated Adhesive in nature) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. These reeled parts in standard option are shipped with 2,500 units per 7" or 178mm diameter reel. The reels are blue in color and made of recyclable plastic. Other option comes in 10,000 units per 13" or 330mm diameter reel Cathode LL34 UNIT ORIENTATION Label LL-34 Leader and Trailer Carrier Tape Cover Tape Components Trailer Tape 80mm minimum or 20 empty pockets. Leader Tape 500mm minimum or 125 empty pockets. July 2005 / B Page 3 (R) TAK CHEONG SEM IC O N DU C TO R LL-34 (Mini-MELF) Tape & Reel Packaging Information LL-34 Reel Outline Dimensions are in millimeters Tape Size QTY Option Dim A Dim B Dim C Dim D Dim N W1 W2 W3 2,500 178 1.5 13 20.2 55 8.4 14.4 7.9 - 10.9 10,000 330 1.5 13 20.2 100 8.4 14.4 7.9 - 10.9 8mm July 2005 / B Page 4 (R) TAK CHEONG SEM IC O N DU C TO R Package Outline Package Case Outline LL-34 DIM Millimeters Inches Min Max Min Max A 3.302 3.505 0.130 0.138 B 1.397 1.499 0.055 0.059 C 0.350 0.500 0.014 0.020 LL34 Notes: 1. 2. LL34 polarity denoted by a band. `Expansion Gap' has no relation to the location of polarity. July 2005 / B Page 5