APE8805A-18Y5P - Advanced Power Electronics Corp. USA

Data and specifications subject to change without notice.

APE8805A

600mA LOW DROPOUT LINEAR REGULATOR WITH SHUTDOWN

PIN ASSIGNMENTS

SOT-23-5L(Y5)

21 3

TOP VIEW

1. VIN

2. GND

3. SHDN

4. BP

5. VOUT

Figure 1. Pin Assignment of APE8805A

ORDERING INFORMATION

SOT-23-5L Marking

Part Number Product

Code Part Number Product

Code

APE8805A-15Y5P Fi APE8805A-28Y5P Fn

APE8805A-18Y5P Fk APE8805A-30Y5P Fr

APE8805A-25Y5P Fm APE8805A-33Y5P Fs

DESCRIPTION

The APE8805A is a low dropout, positive linear regu-

lator with very low quiescent current. The APE8805A

can supply 600mA output current with low dropout

voltage at about 600mV. The BP pin with a 10nF

bypass capacitor can help reduce the output noise

level. The shutdown function can provide remote

control for the external signal to decide the on/off

state of APE8805A. With a logic high level at SHDN

pin, the device is in the on state, and vice versa.

The APE8805A regulator is able to operate with output

capacitors as small as 1µF for stability. Other than

the current limit protection, APE8805A also offers the

on chip thermal shutdown feature providing protection

against overload or any condition when the ambient

temperature exceeds the maximum junction tempe-

rature.

The APE8805A offers high precision output voltage of

± 2%. It is available in fixed output voltages including

1.5V, 1.8V, 2.0V, 2.5V, 2.8V, 3.0V, and 3.3V.

The APE8805A is housed in low-profile, space-saving

5-lead SOT-23 package.

FEATURES

● Low Dropout Voltage of 600mV at 600mA

● Guaranteed 600mA Output Current

● Very Low Quiescent Current at 30µA

● Max. ± 2% Output Voltage Accuracy

● Needs Only 1µF Capacitor for Stability

● Thermal Shutdown Protection

● Current Limit Protection

● Active Low Shutdown Control

● Low-ESR Ceramic Capacitor for Output Stability.

● Tiny package: SOT-23-5L

● RoHS Compliant

APPLICATIONS

● DSC

● Wireless Devices

● LCD Modules

● Battery Power Systems

● Card Readers

● PDA

P: Pb Free with Commercial

Standard (RoHS Compliant)

Output Voltage

15: 1.5V 28: 2.8V

18: 1.8V 30: 3.0V

25: 2.5V 33: 3.3V

APE8805A-□□□

Package Type

Y5: SOT-23-5L

Advanced Power

Electronics Corp.

201003129

20: 2.0V

APE8805A-20Y5P FE

APE8805A

TYPICAL APPLICATION CIRCUIT

APE8805A

VIN

GND

SHDN

VOUT

VIN

VSHDN

VOUT

CIN

1µF

COUT

1µF

CBP

10nF

Figure 2. Typical Application Circuit of APE8805A

Note：To prevent oscillation, it is recommended to use minimum 1µF X7R or X5R dielectric capacitors if ceramics are

used as input/output capacitors.

FUNCTIONAL PIN DESCRIPTION

Pin Name Pin Function

VIN Power is supplied to this device from this pin which is required an input filter capacitor. In general, the input

capacitor in the range of 1µF to 10µF is sufficient.

VOUT

The output supplies power to loads. The output capacitor is required to prevent output voltage from oscillation.

The APE8805A is stable with an output capacitor 1µF or greater. The larger output capacitor will be required for

application with larger load transients. The large output capacitor could reduce output noise, improve stability,

and PSRR.

GND Common ground pin

BP Reference Noise Bypass , the Bypass Capacitor >= 1nF

SHDN Chip Enable (Active High)

BLOCK DIAGRAM

Error

Amp

Current

Limit

Thermal

Shutdown

Vref

1.2V

VIN VOUT

GND

RSEN

PMOS

Power

Shutdown

SHDN

Figure 3. Block Diagram of APE8805A

Advanced Power

Electronics Corp.

APE8805A

ABSOLUTE MAXIMUM RATINGS

● Supply Input Voltage (VIN)----------------------------------------------------------------------------------- + 6V

● Maximum Junction Temperature (TJ)-------------------------------------------------------------------- + 150℃

● Power Dissipation SOT-23-5L (PD)----------------------------------------------------------------------- + 0.4W

● Package Thermal Resistance SOT-23-5L (θJA)--------------------------------------------------------

+ 250℃/W

● Storage Temperature Range (TS)------------------------------------------------------------------------- - 65 to + 150℃

● Lead Temperature (Soldering, 10 sec.) (TLEAD)-------------------------------------------------------- + 260℃

Note：Stresses beyond those listed under “Absolute Maximum Ratings" may cause permanent damage to the device.

RECOMMENDED OPERATING CONDITIONS

● Input Voltage (VIN)-------------------------------------------------------------------------------------------- + 2.8 to + 5.5V

● Operating Junction Temperature Range (TJ)---------------------------------------------------------- - 40 to + 125℃

ELECTRICAL CHARACTERISTICS

(VIN=VOUT+1V or VIN=2.8V whichever is greater, SHDN pin connected to VIN , CIN=1µF, COUT=1µF, TA=25 ºC,

unless otherwise specified)

Parameter Symbol Conditions Min Typ Max Unit

Current Limit ILIMIT R

Load=1Ω 600 mA

Quiescent Current IQ I

O= 0mA 30 50 µA

Standby Current ISTBY VIN=2.8~5V, Output Off 0.1 µA

Output Voltage Accuracy ∆VOUT IO= 1mA -2 +2 %

1.5V ≤ VOUT ≤ 2.0V 1400

2.0V < VOUT ≤ 2.8V 800

Dropout Voltage (Note 1) VDROP I

O=600mA

2.8V < VOUT ≤ 4.5V

600

Line Regulation ∆VLINE IO=1mA, VIN=VOUT +1V to 5V 1 5 mV

Load Regulation (Note 2) ∆VLOAD IO=0mA to 600mA 13 50 mV

Ripple Rejection PSRR VIN=VOUT+1V

fRIPPLE = 120Hz, COUT = 1µF 60 dB

Output Noise ∆n CBP=10nF, f=1KHz, VIN=5V 0.4

µV

Temperature Coefficient TC IOUT = 1mA, VIN = 5V 50 ppm/ ºC

Thermal Shutdown Temperature TSD 160 ºC

Thermal Shutdown Hysteresis ∆TSD 25 ºC

Shutdown Pin Current I

HDN 0.1 µA

Noise Bypass Terminal Voltage VREF 1.23 V

Advanced Power

Electronics Corp.

Ambient temperature ( TA )--------------------------------------------------------------------------------- -40 to 85ºC

APE8805A

Shutdown Pin Voltage (ON) V

HDN(ON) 1.4 V

Shutdown Pin Voltage (OFF) V

HDN(OFF) 0.4 V

Shutdown Exit Delay Time ∆T CBP=0.1uF, COUT=1uF, IOUT=30mA 300 µs

Note 1：The dropout voltage is defined as VIN-VOUT, which is measured when VOUT drops about 100mV.

Note 2：Regulation is measured at a constant junction temperature by using 40ms current pulse and load regulation in the load range from

0mA to 600mA.

APPLICATION INFORMATION

The APE8805A is a low dropout linear regulator that

could provide 600mA output current at dropout volt-

age about 600mV. Current limit and on chip thermal

shutdown features provide protection against any

combination of overload or ambient temperature that

could exceed maximum junction temperature.

1. Output and Input Capacitor

The APE8805A regulator is designed to be stable

with a wide range of output capacitors. The ESR

of the output capacitor affects stability. Larger

value of the output capacitor decreases the peak

deviations and improves transient response for

larger current changes.

The capacitor types (aluminum, ceramic, and tant-

alum) have different characterizations such as

temperature and voltage coefficients. All ceramic

capacitors are manufactured with a variety of

dielectrics, each with different behavior across

temperature and applications. Common dielectrics

used are X5R, X7R and Y5V. It is recommended

to use 1uF to 10uF X5R or X7R dielectric ceramic

capacitors with 30mΩ to 50mΩ ESR range betw-

een device outputs and ground for stability. The

APE8805A is designed to be stable with low ESR

ceramic capacitors and higher values of ca-

pacitors and ESR could improve output stability.

The ESR of output capacitor is very important

because it generates a zero to provide phase lead

for loop stability.

There are no requirements for the ESR on the

input capacitor, but its voltage and temperature

coefficient have to be considered for device

application environment.

2. Protection Features

In order to prevent overloading or thermal con-

dition from damaging the device, APE8805A has

internal thermal and current limiting functions

designed to protect the device. It will rapidly

shut off PMOS pass element during overload-

ing or over temperature condition.

3. Thermal Consideration

The power handling capability of the device will

be limited by maximum operation junction

temperature. The power dissipated by the

device will be estimated by PD = IOUT ×

(VIN-VOUT). The power dissipation should be

lower than the maximum power dissipation

listed in “Absolute Maximum Ratings” section.

4. Shut down Operation

The APE8805A is shutdown by pulling the

SHDN

input low, and turned on by driving the

SHDN

high. If this function is not used, the

SHDN

input should be tied to VIN to keep the regu-

lator on at all times (the

SHDN

must not be

left floating).

Advanced Power

Electronics Corp.

APE8805A

TYPICAL PERFORMANCE CURVE

3.0 3.5 4.0 4.5 5.0 5.5 6.0

Quiescent Current(uA)

Input Voltage(v)

3.54.04.55.05.56.0

650

700

750

800

850

Current Limit(mA)

Input Voltage(v)

Figure 4. Quiescent Current vs. Input Voltage Figure 5. Current limit vs. Input Voltage

-40-20 0 20406080100120

650

700

750

800

850

Cu rre nt Lim it (mA)

Temperature(oC)

-40 -20 0 20 40 60 80 100 120

Quiescent Current(uA)

Temperaure(

Figure 6. Current limit vs. Temperature Figure 7. Quiescent Current vs. Temperature

-25 0 25 50 75 100 125

0.990

0.991

0.992

0.993

0.994

0.995

0.996

0.997

0.998

0.999

1.000

Normalized Output Voltage

Temperature(

0 100 200 300 400 500 600

200

400

600

800

1000

Tj=-40

Tj=25

Tj=85

Tj=125

Dropout Voltage(mV)

Loading Current(mA)

Figure 8. Output Voltage vs. Temperature Figure 9. Dropout Voltage vs. Temperature

Advanced Power

Electronics Corp.

APE8805A

TYPICAL PERFORMANCE CURVE (Continued)

VIN=5V IOUT=150mA CIN=1uF COUT=1uF

Figure 10. Shutdown Function Figure 11. Load Transient Response

VOUT

SHDN

VOUT

IOUT

VIN=4~5V IOUT=10mA CIN=1uF COUT=1uF

VIN=5V IOUT=1mA CIN=1uF COUT=1uF

Figure 12. Line Transient Response Figure 13. Shutdown Exit Delay Time

SHDN

VIN

VOUT

Advanced Power

Electronics Corp.

Package Outline : SOT-23-5L

Millimeters

MIN NOM MAX

A 1.00 1.10 1.30

A1 0.00 --- 0.10

A2 0.70 0.80 0.90

b 0.35 0.40 0.50

C 0.10 0.15 0.25

D 2.70 2.90 3.10

E 1.50 1.60 1.80

e --- 1.90(TYP) ---

H 2.60 2.80 3.00

L 0.37 --- ---

θ11°5°9°

e2 --- 0.95(TYP) ---

Note 1：Package Body Sizes Exclude Mold Flash Protrusions or Gate Burrs.

Note 2：Tolerance ± 0.1000 mm(4mil) Unless Otherwise Spe- cified.

Note 3：Coplanarity：0.1000 mm

Note 4：Dimension L Is Measured in Gage plane.

Part Marking Information & Packing : SOT-23 -5L

ADVANCED POWER ELECTRONICS CORP.

SYMBOLS

F&XX

Part : F&(Identification code)

Date Code

APE8805A-15Y5P Fi APE8805A-28Y5P Fn

APE8805A-18Y5P Fk APE8805A-30Y5P Fr

APE8805A-25Y5P Fm APE8805A-33Y5P Fs

APE8805A-20Y5P FE