1015 FIBER SENSORS Sensor Block for Simple Wiring SL-BMW/BW Related Information General terms and conditions.............. F-3 SU-7 / SH...................................... P.377~ LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS SAFETY LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS *N ever use this product in a device for personnel protection. * In case of using devices for personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country. PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS panasonic.net/id/pidsx/global STATIC CONTROL DEVICES LASER MARKERS PLC Quick connection of 16 sensors HUMAN MACHINE INTERFACES ORDER GUIDE ENERGY MANAGEMENT SOLUTIONS FA COMPONENTS Designation Appearance Model No. MACHINE VISION SYSTEMS For Large Scale System Other Products Sensor block UV CURING SYSTEMS SL-BMW/BW Plug-in unit sensor main block SL-BMW One sensor main block allows four plug-in units to be connected, and if three extension blocks are used, total 16 plug-in units can be connected. A commercial MIL connector cable links it to a PLC input module. The ORed output of the self-diagnosis outputs of the connected sensors can be output as Channel 0. However, in this case, a plug-in unit cannot be connected at Channel 0. Plug-in unit extension block SL-BX Four plug-in units can be connected to one extension block. Snap-connector extension block (Note 1) SL-BXJ Eight input devices can be connected to one extension block. The connections are simple using snap-female connectors. SL-BW Four plug-in units can be connected to one extension block. The attached cable links it to a PLC input module. The ORed output of the self-diagnosis outputs of the connected sensors can be output as Channel 0. However, in this case, a plug-in unit cannot be connected at Channel 0. Amplifier-separated photoelectric sensor SU-7J Its thickness is merely 10 mm 0.394 in. The sensitivity is automatically set with ease. 12 kinds of sensor heads are suitable with it. [Refer to SU-7 / SH series (p.377~) for details.] Input terminal unit (Note 1) SL-TJ1 It allows connection of 1 No. of various kinds of input devices, such as, a photoelectric sensor, an inductive proximity sensor or a limit switch. Plug-in unit 4-channel sensor block Plug-in unit Description 4-pin type snap female connector The photo above shows a plug-in unit attached. 1 1 2 2 3 SL-CJ1 4 (Note 2) 3 (White) SL-CJ2 4 (Note 2) (Black) Notes: 1) PNP output device cannot be connected. 2) Contact us for UL compatibility. For 0.08 to 0.2 mm2 (Conductor cross-section area) Wire dia.: o0.7 to o1.2 mm o0.028 to o0.047 in For 0.3 mm2 (Conductor cross-section area) Wire dia.: o1.1 to o1.6 mm o0.043 to o0.063 in It is used to connect an input device to the snapconnector extension block SL-BXJ. Compatible crimping pliers: SL-JPC (Refer to p.1013.) 10 pcs. per set Sensor Block for Simple Wiring SL-BMW/BW 1016 SPECIFICACTIONS FIBER SENSORS LASER SENSORS Sensor blocks Designation Plug-in unit sensor main block Plug-in unit extension block Snap-connector extension block Plug-in unit 4-channel sensor block Item Model No. Supply voltage Current consumption Input channel No. SL-BMW SL-BX SL-BXJ (Note 2) SL-BW Depends on used input device - Supplied from sensor main block Depends on used input device Depends on the number and characteristics of the connected input devices (Note 3) Depends on the number and characteristics 6 mA/channel (excluding connected users' devices) of the connected input devices (Note 3) 4 inputs (Max. 16 inputs with extension blocks) (Note 4) Ambient temperature 4 inputs (Note 5) 0 to +55 C +32 to +131 F (No dew condensation allowed), Storage: -20 to +70 C -4 to +158 F Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH Material Enclosure: Heat-resistant ABS, Connector: PBT, Case cover (SL-BXJ only): Polycarbonate - Cable 0.3 mm2 2-core cabtyre cable, 2 m 6.562 ft long Weight Net weight: 130 g approx. Net weight: 30 g approx. Net weight: 60 g approx. Net weight: 130 g approx. Extension connector cap: 1 pc. Plug-in connector cap: 1 set (Note 6) - Input designation label set: 1 sheet Socket seal: 8 sheets Plug-in connector cap: 1 set (Note 6) Accessories Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 C +68 F. 2) PNP output device cannot be connected. 3) Neither SL-BMW, SL-BX or SL-BW consumes current by itself. 4) Maximum 15 inputs are allowed if the self-diagnosis output is used. 5) Maximum 3 inputs are allowed if the self-diagnosis output is used. 6) Use the extension connector cap and the plug-in connector cap to cover each exposed connector. Three plug-in connector caps are joined together. If two, or less, are to be used, cut to separate them. 0.2 mm2 6-core cabtyre cable, 2 m 6.562 ft long Extension connector cap Plug-in connector cap SAFETY LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS STATIC CONTROL DEVICES PLC Item Model No. Supply voltage Current consumption Output Applicable sensor heads Sensing range Functions Connecting method Ambient temperature Amplifier-separated photoelectric sensor Input terminal unit SU-7J SL-TJ1 12 to 24 V DC 10 % (24 V DC supplied from sensor block) 24 V DC 10 % (24 V DC supplied from sensor block) 35 mA or less 0 mA (7.5 mA or less when the indicator lights up, excluding connected users' device) Sensing output and self-diagnosis output - SH series NPN output transistor, DC 2-wire type or relay output sensor, switch, etc. (Signal conditions depend on the input conditions of the PLC connected to the sensor block.) Thru-beam type: 2 m 6.562 ft with SH-33R Reflective type: 100 mm 3.937 in with SH-32R - Automatic sensitivity setting, Sensitivity shift Stability margin indication, Interference prevention 0 to 5 sec. variable ON and OFF-delay timers Indicators Red LED: lights up when the sensor input is ON Yellow LED: lights up when the self-diagnosis input is ON Connector Connector (Screw-on-terminal connection of users' input device) -10 to +55 C +14 to +131 F (Note 2), Storage: -20 to +70 C -4 to +158 F -10 to +50 C +14 to +122 F (Note 2), Storage: -20 to +70 C -4 to +158 F Ambient humidity Accessories AREA SENSORS LASER MARKERS Designation Weight MICRO PHOTOELECTRIC SENSORS MEASUREMENT SENSORS Plug-in units Material PHOTOELECTRIC SENSORS 35 to 85 % RH, Storage: 35 to 85 % RH Enclosure: Heat-resistant ABS, Cover: Polycarbonate Cable lock lever: PPS Enclosure: Heat-resistant ABS, Cover: Polycarbonate Net weight: 65 g approx. Net weight: 20 g approx. MS-DIN-2 (Amplifier mounting bracket): 1 pc. Mode indication label: 1 sheet - Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 C +68 F (SU-7J: +23 C +73.4 F). 2) Please take care that the rated ambient temperature of the sensor block is 0 to +55 C +32 to +131 F. HUMAN MACHINE INTERFACES ENERGY MANAGEMENT SOLUTIONS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS For Large Scale System Other Products SL-BMW/ BW 1017 LASER SENSORS PHOTOELECTRIC SENSORS I/O CIRCUIT AND WIRING DIAGRAMS SL-BMW I/O circuit diagram SAFETY LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MIL connector pin position Color code MICRO PHOTOELECTRIC SENSORS AREA SENSORS SL-BMW/BW Plug-in connector + V (Brown) 24 V DC 10 % + 0 V (Blue) - Self-diagnosis MIL connector output (STB.OUT) / OUT0 OUT8 OUT1 OUT9 OUT2 OUT10 OUT3 OUT11 OUT4 OUT12 OUT5 OUT13 OUT6 OUT14 OUT7 OUT15 +24 V +24 V 0V 0V Extension connector IN0 STB.IN IN1 STB.IN IN2 STB.IN IN3 STB.IN FIBER SENSORS Sensor Block for Simple Wiring +24 V 0V STB.IN N.C. IN4 IN5 IN6 IN7 IN8 IN9 IN10 IN11 IN12 IN13 IN14 IN15 Extension connector pin position SL-BW I/O circuit diagram Color code Plug-in connector + V (Brown) + IN3 STB.IN IN2 Self-diagnosis output (STB.OUT) / OUT0 (Black) STB.IN 0 V (Blue) - IN1 24 V DC 10 % STB.IN UV CURING SYSTEMS Sensing input (IN) Self-diagnosis input (STB. IN) IN15 IN13 IN11 IN9 IN14 IN12 IN10 IN8 IN0 MACHINE VISION SYSTEMS 20 pin MIL connector Connector pin position (TOP VIEW) 0V ENERGY MANAGEMENT SOLUTIONS FA COMPONENTS OUT15 +24 V 0V No. 20 pin mark +24 V STB.IN HUMAN MACHINE INTERFACES OUT7 +24 V 0V N.C. IN7 IN5 (Not connected) 0 V IN6 IN4 STB.IN +24 V STATIC CONTROL DEVICES PLC OUT8 OUT9 Plug-in connector pin position MEASUREMENT SENSORS LASER MARKERS OUT0 OUT1 OUT1 (White) OUT2 (Gray) OUT3 (Black / White) For Large Scale System Other Products SL-BMW/ BW DIMENSIONS (Unit: mm in) SL-BMW SL-BW The CAD data can be downloaded from our website. Plug-in unit sensor main block Plug-in unit 4-channel sensor block Self-diagnosis output switch o5.8 o0.228 cable, 2m 6.562 ft long 6.6 0.260 9.5 MIL connector (Note 1) 0.374 2-o4.5 o0.177 mounting holes 1.2 0.047 11 8.8 0.433 0.346 53 2.087 73 2.874 19.8 0.780 44.7 1.760 11 0.433 42 1.654 10.3 0.406 1.2 0.047 30.9 1.217 18 0.709 Suitable for 35 mm 1.378 in width DIN rail Notes: 1) Not incorporated on SL-BW. 2) Do not remove it from SL-BW. 20 41.5 0.787 1.634 53 2.087 73 2.874 4 0.157 5.3 0.209 30.9 1.217 10.3 0.406 Extension connector 7.7 0.303 39 35 1.535 1.378 Extension connector (Note 1) 5.15 0.203 2-o4.5 o0.177 mounting holes 4.5 0.177 26.6 1.047 10.5 0.413 4-plug-in unit removal buttons 62 20 2.441 0.787 4 0.157 2 0.079 Connector cap (Note 2) Plug-in unit extension block Extension connector 20.8 0.819 31 1.220 4-plug-in unit removal buttons SL-BX 14 0.551 35 1.378 18 0.709 Suitable for 35 mm 1.378 in width DIN rail 14 0.551 Sensor Block for Simple Wiring DIMENSIONS (Unit: mm in) SL-BXJ 73 2.874 65 2.559 19.8 26.6 0.780 1.047 2-o4.5 o0.177 mounting holes SU-7J Plug-in unit (Amplifier-separated photoelectric sensor) Setting mode selection switch Cable lock lever Beam-receiving cable inlet Beam-emitting cable inlet 4 0.157 4.5 0.177 4 0.157 5 0.197 13.6 0.535 19.5 0.768 45 21 0.827 1.772 8-operation indicators (Green) 8-connectors 10 0.394 Removable cover 5.8 0.228 36 1.417 13.8 0.543 20.2 0.795 24.3 0.957 Plug-in unit (Input terminal unit) +24 V 0 V ALM-IN SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC CONTROL DEVICES 12.5 0.492 LASER MARKERS PLC 3.1 0.122 HUMAN MACHINE INTERFACES 8.2 0.323 3 0.118 31.5 1.240 3 0.118 6.2 0.244 6.5 0.256 4.3 0.169 12.2 0.480 36.5 1.437 9 0.354 Snap-female connector 11.2 0.441 7.2 0.283 11.1 0.437 PARTICULAR USE SENSORS 6.2 5 0.244 0.197 Suitable for 35 mm 1.378 in width DIN rail SL-CJ1SL-CJ2 Self-diagnosis input indicator (Yellow) MICRO PHOTOELECTRIC SENSORS INDUCTIVE PROXIMITY SENSORS Note: The top view is shown without the cable and the cover. Sensor signal input indicator (Red) 50.5 1.988 59 2.323 8.2 3 0.323 0.118 7.2 0.283 After hook-up IN PHOTOELECTRIC SENSORS PRESSURE / FLOW SENSORS 3.1 0.122 12.2 0.480 36.5 1.437 LASER SENSORS SAFETY LIGHT CURTAINS / SAFETY COMPONENTS 3.5 4.2 5 0.138 0.165 0.197 6.2 0.244 23 11.4 8.9 9 6.3 0.906 0.449 0.350 0.354 0.248 67 2.638 8 0.315 2 0.079 FIBER SENSORS AREA SENSORS 5.6 0.220 BK 19.1 3 0.118 0.752 6.3 0.248 6.5 0.256 Suitable for 35 mm 1.378 in width DIN rail Timer adjuster Sensitivity setting buttons Stability indicator (Green) Operation indicator (Red) 31.5 2.1 1.240 0.083 49.5 1.949 SL-TJ1 GY 5.5 0.217 14.4 0.567 12.7 0.500 66 2.598 68 2.677 1018 The CAD data can be downloaded from our website. Snap-connector extension block Extension connector SL-BMW/BW 2 3 7.8 0.307 9 0.354 10 0.394 Suitable for 35 mm 1.378 in width DIN rail 1 4 ENERGY MANAGEMENT SOLUTIONS FA COMPONENTS 17 0.669 MACHINE VISION SYSTEMS 5 0.197 UV CURING SYSTEMS Note: The top view is shown without the cover. Sensor block + Plug-in unit For Large Scale System Other Products Assembly dimensions of plug-in unit block + plug-in units SU-7J Others SL-BMW/ BW (Note) (81) (3.189) (Note) 62 2.441 41.5 1.634 (49.5) (1.949) Note: The dotted line shows the SL-BMW shape. (73) (2.874) 4 0.157 (Note) 62 2.441 41.5 1.634 (49.5) (1.949) Note: The dotted line shows the SL-BMW shape. (Note)