Semiconductor Components Industries, LLC, 2001
May, 2001 – Rev. 5 1Publication Order Number:
1N5400/D
1N5400 thru 1N5408
1N5404 and 1N5406 are Preferred Devices
Axial-Lead Standard
Recovery Rectifiers
Lead mounted standard recovery rectifiers are designed for use in
power supplies and other applications having need of a device with the
following features:
•High Current to Small Size
•High Surge Current Capability
•Low Forward Voltage Drop
•Void–Free Economical Plastic Package
•Available in Volume Quantities
•Plastic Meets UL 94V–0 for Flammability
Mechanical Characteristics
•Case: Epoxy, Molded
•Weight: 1.1 gram (approximately)
•Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
•Lead and Mounting Surface Temperature for Soldering Purposes:
220°C Max. for 10 Seconds, 1/16″ from case
•Polarity: Cathode Indicated by Polarity Band
•Marking: 1N5400, 1N5401, 1N5402, 1N5404, 1N5406, 1N5407,
1N5408
MAXIMUM RATINGS
Please See the Table on the Following Page
STANDARD RECOVERY
RECTIFIERS
50–1000 VOLTS
3.0 AMPERES
http://onsemi.com
Device Package Shipping
ORDERING INFORMATION
1N5400 Axial Lead 500 Units/Box
1N5400RL Axial Lead 1200/Tape & Reel
AXIAL LEAD
CASE 267–05
STYLE 1
Preferred devices are recommended choices for future use
and best overall value.
1N5401 Axial Lead 500 Units/Box
1N5401RL Axial Lead 1200/Tape & Reel
1N5402 Axial Lead 500 Units/Box
1N5402RL Axial Lead 1200/Tape & Reel
1N5404 Axial Lead 500 Units/Box
1N5404RL Axial Lead 1200/Tape & Reel
1N5406 Axial Lead 500 Units/Box
1N5406RL Axial Lead 1200/Tape & Reel
1N5407 Axial Lead 500 Units/Box
1N5407RL Axial Lead 1200/Tape & Reel
1N5408 Axial Lead 500 Units/Box
1N5408RL Axial Lead 1200/Tape & Reel
AL = Assembly Location
1N540x = Device Number
x = 0, 1, 2, 4, 6, 7 or 8
YY = Year
WW = Work Week
MARKING DIAGRAM
AL
1N
540x
YYWW
1N5400 thru 1N5408
http://onsemi.com
2
MAXIMUM RATINGS
Rating Symbol 1N5400 1N5401 1N5402 1N5404 1N5406 1N5407 1N5408 Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
50 100 200 400 600 800 1000 Volts
Non–repetitive Peak Reverse Voltage VRSM 100 200 300 525 800 1000 1200 Volts
Average Rectified Forward Current
(Single Phase Resistive Load,
1/2″ Leads, TL = 105°C)
IO3.0 Amp
Non–repetitive Peak Surge Current
(Surge Applied at Rated Load
Conditions)
IFSM 200 (one cycle) Amp
Operating and Storage Junction
Temperature Range TJ
Tstg – 65 to +170
– 65 to +175 °C
THERMAL CHARACTERISTICS
Characteristic Symbol Typ Unit
Thermal Resistance, Junction to Ambient (PC Board Mount, 1/2″ Leads) RθJA 53 °C/W
ELECTRICAL CHARACTERISTICS
Characteristic Symbol Min Typ Max Unit
Forward Voltage (IF = 3.0 Amp, TA = 25°C) vF– – 1.0 Volts
Reverse Current (Rated dc Voltage)
TA = 25°C
TA = 150°C
IR–
––
–10
100
µA
Ratings at 25°C ambient temperature unless otherwise specified.
60 Hz resistive or inductive loads.
For capacitive load, derate current by 20%.
Lead Length, L (IN)
Mounting
Method 1/8 1/4 1/2
1
2
3
50
58
RθJA
51 53
59 61
28
°C/W
°C/W
°C/W
TYPICAL VALUES FOR RθJA IN STILL AIR
Data shown for thermal resistance junction–to–ambient (RθJA)
for the mountings shown is to be used as typical guideline values
for preliminary engineering or in case the tie point temperature
cannot be measured.
NOTE 1 — AMBIENT MOUNTING DATA
MOUNTING METHOD 1
P.C. Board Where Available
Copper Surface area is small
MOUNTING METHOD 2
Vector Push–In Terminals T–28
MOUNTING METHOD 3
P.C. Board with
1–1/2” x 1–1/2”
Copper Surface
3/4
55
63
ÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉ
L L
ÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉ
L L
É
É
É
É
É
L = 1/2”
Board Ground Plane
1N5400 thru 1N5408
http://onsemi.com
3
Figure 1. Forward Voltage
vF, INSTANTANEOUS VOLTAGE (VOLTS)
0.8 2.01.2 2.8
0.3
1.0
3.0
2.0
20
10
0.2
200
70
30
5.0
50
0.5
, INSTANTANEOUS FORWARD CURRENT (AMPS)
F
Figure 2. Maximum Nonrepetitive Surge Current
Figure 3. Current Derating Various Lead Lengths
7.0
100
0.7
TJ = 25°C
i
0.4 1.6 2.4
400
200
300
401.0 NUMBER OF CYCLES
50
60
70
80
90
100
2.0 3.0 5.0 10
3.2
Figure 4. Current Derating PC Board Mounting
7.0 20 30 50 70 100
40 60 80 100 120 140 160 180
8.0
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0
40 60 80 100 120 140 160 180
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
RθJA = 50°C/W
RθJA = 28°C/W
I(PK)
I(AV) = π
Note for Resistive Load
5.0
10
20
TA, AMBIENT TEMPERATURE (°C)
I(PK)
I(AV) = π
Capacitive Loads
Surge Applied
at Rated Load
Conditions
f = 60Hz
1 CYCLE
Resistive Load
Both Leads to Heat
Sink with Lengths
as Shown
1/4”
L = 1/32”
1/2”
TL, LEAD TEMPERATURE (°C)
TYPICAL
IFSM, PEAK HALF WAVE CURRENT (AMPS)
1N5400 thru 1N5408
http://onsemi.com
4
PACKAGE DIMENSIONS
AXIAL LEAD
CASE 267–05
ISSUE G
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
STYLE 1:
PIN 1. CATHODE (POLARITY BAND)
2. ANODE
12
KA
K
D
B
DIM MIN MAX MIN MAX
MILLIMETERSINCHES
A0.287 0.374 7.30 9.50
B0.189 0.209 4.80 5.30
D0.047 0.051 1.20 1.30
K1.000 --- 25.40 ---
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes
without further notice to any products herein. SCILLC makes no warranty , representation or guarantee regarding the suitability of its products for any particular
purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,
including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or
death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold
SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable
attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
CENTRAL/SOUTH AMERICA:
Spanish Phone: 303–308–7143 (Mon–Fri 8:00am to 5:00pm MST)
Email: ONlit–spanish@hibbertco.com
Toll–Free from Mexico: Dial 01–800–288–2872 for Access –
then Dial 866–297–9322
ASIA/PACIFIC: LDC for ON Semiconductor – Asia Support
Phone: 1–303–675–2121 (Tue–Fri 9:00am to 1:00pm, Hong Kong Time)
Toll Free from Hong Kong & Singapore:
001–800–4422–3781
Email: ONlit–asia@hibbertco.com
JAPAN: ON Semiconductor, Japan Customer Focus Center
4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031
Phone: 81–3–5740–2700
Email: r14525@onsemi.com
ON Semiconductor Website: http://onsemi.com
For additional information, please contact your local
Sales Representative.
1N5400/D
NORTH AMERICA Literature Fulfillment:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada
Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada
Email: ONlit@hibbertco.com
Fax Response Line: 303–675–2167 or 800–344–3810 Toll Free USA/Canada
N. American Technical Support: 800–282–9855 Toll Free USA/Canada
EUROPE: LDC for ON Semiconductor – European Support
German Phone: (+1) 303–308–7140 (Mon–Fri 2:30pm to 7:00pm CET)
Email: ONlit–german@hibbertco.com
French Phone: (+1) 303–308–7141 (Mon–Fri 2:00pm to 7:00pm CET)
Email: ONlit–french@hibbertco.com
English Phone: (+1) 303–308–7142 (Mon–Fri 12:00pm to 5:00pm GMT)
Email: ONlit@hibbertco.com
EUROPEAN TOLL–FREE ACCESS*: 00–800–4422–3781
*Available from Germany, France, Italy, UK, Ireland
