Transformer Product Class: Material Data Sheet SMD Transformer B78476*****A003 11.04.2018 Date IMDS ID if available Version: 17 Product Part (IMDS: semi component) Material Class (IMDS: Material) Active Part Ceramic 4B Manganese Zinc Ferrite 100 12645-49-7 Duromer 2C Parylene 100 25722-33-2 0.9 Heavy Metal 1C Cu 100 7440-50-8 14.4 Elastomer 2B Polyurethane (PUR) 100 68400-67-9 0.8 Diallyle phthalate (DAP) 30 25053-15-0 Thermoplastic 2A Aluminium hydroxide 40 21645-51-2 Glass Fiber 30 65997-17-3 Elastomer 2B Polydimethylsiloxane (MQ) 100 63148-62-9 15.2 Heavy Metal 1C Sn 100 7440-31-5 0.2 1C Cu 94 7440-50-8 1C Sn 6 7440-31-5 1C Sn 100 Encapsulation and Mounting Termination Heavy Metal Heavy Metal Material (Classification) VDA 231 Substance TMPS**) [wt%] CAS typical mass of Traces if applicable material see 1) [wt-%] 27.9 33.8 6.7 7440-31-5 0.1 Sum in total: 100.0 Weight [approx. in g] Part Numbers Weight [approx. in g] Part Numbers Weight [approx. in g] Part Numbers 1.80 1.50 1.80 0.80 3.70 1.25 2.74 3.37 1.80 0.86 3.20 0.86 0.86 1.71 0.86 B78476A1889A003 B78476A7694A003 B78476A7903A003 B78476A8065A003 B78476A8066A003 B78476A8067A003 B78476A8068A003 B78476A8101A003 B78476A8135A003 B78476A8245A003 B78476A8246A003 B78476A8247A003 B78476A8248A003 B78476A8249A003 B78476A9730A003 2.94 2.10 2.90 1.80 2.23 2.00 0.80 1.91 3.40 2.00 1.71 0.26 2.13 0.25 B78476A8250A003 B78476A8251A003 B78476A8252A003 B78476A8253A003 B78476A8317A003 B78476A8382A003 B78476A8443A003 B78476A8575A003 B78476A8584A003 B78476A8643A003 B78476A8856A003 B78476A9489A003 B78476A9558A003 B78476A9588A003 1.37 2.10 0.88 2.80 2.31 2.43 2.25 2.15 2.83 0.80 2.70 0.55 1.80 0.80 0.16 B78476A9594A003 B78476A9608A003 B78476A9612A003 B78476A9629A003 B78476A9642A003 B78476A9644A003 B78476A9645A003 B78476A9659A003 B78476A9683A003 B78476A9684A003 B78476A9700A003 B78476A9712A003 B78476B8135A003 B78476A8572A003 B78476A9718A003 Not part of a Product Class Contact Dr. Johann Reindl, EPQM Important remarks: Division EPCOS AG, Magnetics Business Group (MAG) 1) Address Rosenheimer Strasse 116b, 81669 Munich The declaration limit is 0.1% as defined by IEC 62474 (IEC PAS 61906) Traces are product parts, substances etc. that are below a percentage of 0.1 % by weight, if not otherwise regulated Tel: +49 89 54020 3030 mailto: 2) This Material Data Sheet contains typical values of the respective products set forth johann.reindl@epcos.com herein. We expressly point out that all values and statements contained herein are based on our best present knowledge and cannot be regarded as binding statements or *) others: .(not declarable or prohibited substances acc. GADSL) binding product specifications, unless otherwise explicitly agreed in writing. EPCOS AG AND ITS AFFILIATES HEREBY EXPRESSLY DISCLAIM ANY REPRESENTATION **) typical mass percentage of substance OR WARRANTY, WHETHER EXPRESS, IMPLIED OR STATUTORY, WITH REGARD TO THE STATEMENTS AND VALUES CONTAINED HEREIN, INCLUDING BUT NOT LIMITED TO ANY REPRESENTATION OR WARRANTY OF MERCHANTABILITY OR SUITABILITY FOR ANY PURPOSE. The products set forth herein are "RoHS-compatible". RoHS-compatible means that products are compatible with the requirements according to Art. 4 (substance restrictions) of Directive 2011/65/EU of the European Parliament and of the Council of June 8th, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. Umbrella Specification Rev 5.02, based on ZVEI Layout, EPCOS AG, Dr. G. Schulz, Dept. TQ, 08/2014 EPCOS AG 2014*page: 1/2 RoHS - Exemptions for the Product Class / Product according to Annex III: ( no exemptions; Exemption 6 (a): valid not valid ) Lead as an alloying element in steel for machining purposes and in galvanized steel containing up to 0,35 % lead by weight; Exemption 6 (b): Lead as an alloying element in aluminium containing up to 0,4 % lead by weight; Exemption 6 (c): Copper alloy containing up to 4 % lead by weight; Exemption 7 (a): Lead in high melting temperature type solder (i.e. lead-based alloys containing 85 % by weight or more lead); Exemption 7 (c)-I: Electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix compound; Exemption 7 (c)-II: Lead in dielectric ceramic in capacitors for a rated voltage of 125 V AC or 250 V DC or higher; Exemption 7 (c)-III: Lead in dielectric ceramic in capacitors for a rated voltage of less than 125 V AC or 250 V DC; Exemption 15: Lead in solders to complete a viable electrical connection between semiconductor die and carrier within integrated circuit Flip Chip packages; Other Exemption than above .................................................................... Umbrella Specification Rev 5.02, based on ZVEI Layout, EPCOS AG, Dr. G. Schulz, Dept. TQ, 08/2014 EPCOS AG 2014*page: 2/2