EZ-LIGHT(R) TL50 High Brightness Tower Light Datasheet Multi-Color General-Purpose or Audible Indicators * * * * * * * * * Similar in design and construction to standard TL50 Tower Lights, but more than 4 times brighter, improving visibility in areas with high levels of ambient light. Rugged, cost-effective, and easy-to-install multi-segment indicators Illuminated segments provide easy-to-see operator guidance and indication of equipment status Displays up to 5 colors Available in black or light gray housing Audible models available with standard, sealed, or omni-directional audible element Compact devices are completely self-contained - no controller needed 18 to 30 V dc or 24 V ac operation No assembly required Non-Audible Models Model1 LED Function2 # of LED Colors TL50HRQ 1 Connection3 Inputs Red TL50HGRQ 2 Green, Red TL50HGYRQ 3 Green, Yellow, Red 4-pin Euro integral QD connector TL50HBGYRQ 4 Blue, Green, Yellow, Red 5-pin Euro integral QD connector TL50HWBGYRQ 5 White, Blue, Green, Yellow, Red 8-pin Euro integral QD connector Bimodal (NPN or PNP) NOTE: Audible Models are listed on the next page. For additional models and colors, visit Banner Engineering website at www.bannerengineering.com. 1 Models with black housing are listed. For gray housing, add suffix C at the end of the model number (cabled models) or before the Q (QD models), for example, TL50HRC or TL50HRCQ. 2 The first color listed is the bottom color, going up in successive order. Contact the factory for other colors and color combinations 3 Integral QD models only are listed; mating cordset required (see Cordsets on page 5). * For 150 mm (5.9 in) PVC pigtail with QD, replace Q with QP in the model number, for example, TL50HRQP. * For 2 m (6.5 ft) cable, omit suffix Q from the model number, for example, TL50HR. Original Document 152837 Rev. I 9 April 2014 152837 EZ-LIGHT(R) TL50 High Brightness Tower Light Audible Models # of LED Colors Standard Audible Models4 LED Function5 Connection6 TL50HRAQ 1 Red TL50HGRAQ 2 Green, Red TL50HGYRAQ 3 Green, Yellow, Red 5-pin Euro integral QD connector TL50HBGYRAQ 4 Blue, Green, Yellow, Red 8-pin Euro integral QD connector Sealed Audible Models4 Continuous Pulsed at 1.6 Hz Staccato # of LED Colors LED Function5 4-pin Euro integral QD connector Connection6 TL50HRALSQ TL50HRALS3Q TL50HRALS4Q 1 Red TL50HGRALSQ TL50HGRALS3Q TL50HGRALS4Q 2 Green, Red TL50HGYRALSQ TL50HGYRALS3Q TL50HGYRALS4Q 3 Green, Yellow, Red 5-pin Euro integral QD connector TL50HBGYRALSQ TL50HBGYRALS3Q TL50HBGYRALS4Q 4 Blue, Green, Yellow, Red 8-pin Euro integral QD connector Omni-Directional Sealed Audible Models4 Continuous Pulsed at 1.6 Hz Staccato # of LED Colors LED Function5 TL50HRAOSQ TL50HRAOS3Q TL50HRAOS4Q 1 Red TL50HGRAOSQ TL50HGRAOS3Q TL50HGRAOS4Q 2 Green, Red 4-pin Euro integral QD connector Connection6 4-pin Euro integral QD connector TL50HGYRAOSQ TL50HGYRAOS3Q TL50HGYRAOS4Q 3 Green, Yellow, Red 5-pin Euro integral QD connector TL50HBGYRAOSQ TL50HBGYRAOS3Q TL50HBGYRAOS4Q 4 Blue, Green, Yellow, Red 8-pin Euro integral QD connector Omni-Directional Sealed Audible Models with Intensity Adjustment4 Continuous Pulsed at 1.6 Hz Staccato # of LED Colors LED Function5 TL50HRAOSIQ TL50HRAOS3IQ TL50HRAOS4IQ 1 Red TL50HGRAOSIQ TL50HGRAOS3IQ TL50HGRAOS4IQ 2 Green, Red Connection6 4-pin Euro integral QD connector TL50HGYRAOSIQ TL50HGYRAOS3IQ TL50HGYRAOS4IQ 3 Green, Yellow, Red 5-pin Euro integral QD connector TL50HBGYRAOSIQ TL50HBGYRAOS3IQ TL50HBGYRAOS4IQ 4 Blue, Green, Yellow, Red 8-pin Euro integral QD connector Inputs Bimodal (NPN or PNP) Inputs Bimodal (NPN or PNP) Inputs Bimodal (NPN or PNP) Inputs Bimodal (NPN or PNP) 4 Models with black housing are listed. For gray housing, add suffix C at the end of the model number (cabled models) or before the Q (QD models), for example, TL50HRC or TL50HRCQ. 5 The first color listed is the bottom color, going up in successive order. Contact the factory for other colors and color combinations 6 Integral QD models only are listed; mating cordset required (see Cordsets on page 5). * For 150 mm (5.9 in) PVC pigtail with QD, replace Q with QP in the model number, for example, TL50HRQP. * For 2 m (6.5 ft) cable, omit suffix Q from the model number, for example, TL50HR. 2 www.bannerengineering.com - tel: 763-544-3164 P/N 152837 Rev. I EZ-LIGHT(R) TL50 High Brightness Tower Light Specifications Supply Voltage and Current 18 to 30V dc (10% max. ripple); or 21 to 27 V ac Indicators - max. current per LED color: * at 18V dc: 100 mA * at 30V dc: 60 mA * at 21V ac: 80 mA * at 27V ac: 70 mA Standard Audible Alarm: 25 mA max. current Sealed Audible Alarm: 35 mA max. current Omni-Directional Sealed Audible Alarm: 45 mA max. current Indicators 1 to 5 colors; Green, Red, Yellow, Blue, White; LEDs are independently selected Supply Protection Circuitry: Protected against reverse polarity and transient voltages Input Response Time Indicator On/Off: 10 ms (max.) Audible Adjustment Standard Audible Alarm: Unscrew the cover (up to 1.5 turns max.) to adjust the audible intensity. (Do not exceed 1.5 turns or the cover may detach during operation.) For max. intensity, rotate the center plug 180 counterclockwise to remove it. Sealed Audible Alarm and Omni-Directional Sealed Audible Alarm with Intensity Adjustment: Rotate the front cover until the desired intensity is reached. Omni-Directional Sealed Audible Alarm: No adjustment. Connections Integral 4-pin, 5-pin, or 8-pin M12/Euro-style QD, 150 mm (5.9 in) PVC pigtail with QD, or 2 m (6.5 ft) integral cable, depending on model Operating Conditions: Non-Audible:-40 C to +50 C (-40 F to +122 F) Standard and Sealed Audible: -20 C to +50 C (-4 F to +122 F) Max. Rel. Humidity: 95% at 50 C (non-condensing) Audible Alarm Standard Audible Alarm: 2.7 KHz 500 Hz oscillation frequency; max. intensity 92 db at 1 m (3.3 ft) (typical) Sealed Audible Alarm: 2.9 KHz 250 Hz oscillation frequency; max. intensity 94 db at 1 m (3.3 ft) (typical) Omni-Directional Sealed Audible Alarm: 2.1 KHz 250 Hz oscillation frequency; max intensity 99 db at 1m (3.3 ft) (typical) Omni-Directional Sealed Audible Alarm with Intensity Adjustment: 2.1 KHz 250 Hz oscillation frequency; max intensity 95 dB at 1m (3.3 ft) (typical) Construction: Bases and Covers: ABS Light Segment: Polycarbonate Environmental Rating Non-Audible and Sealed Audibles: IEC IP67 Standard Audible:IEC IP50 Certifications Vibration and Mechanical Shock: All models meet Mil. Std. 202F requirements method 201A (vibration: 10 to 60 Hz max., double amplitude 0.06 in, maximum acceleration 10G). Also meets IEC 947-5-2; 30G 11 ms duration, half sine wave. 50.0 [1.97"] H M30 x 1.5 (mounting nut included) Internal Threads 1/2-14 NPSM Max Torque 2.25 Nm [20in-lbf] P/N 152837 Rev. I 19.0 [0.75"] Tower Height (H) # of Color s Non-Audible Standard Audible* Sealed Audible Omni-Directional Sealed Audible 1 61.2 mm (2.4 in) 92.0 mm (3.6 in) 115.1 mm (4.5 in) 129.1 mm (5.1 in) 2 101.9 mm (4.0 in) 132.7 mm (5.2 in) 155.8 mm (6.1 in) 169.8 mm (6.7 in) 3 142.6 mm (5.6 in) 173.4 mm (6.8 in) 196.5 mm (7.7 in) 210.5 mm (8.3 in) 4 183.3 mm (7.2 in) 214.1 mm (8.4 in) 237.2 mm (9.3 in) 251.2 mm (9.9 in) 5 224.0 mm (8.8 in) - - - * Tower height (H) with top unscrewed approximately 3.5 mm to allow sound to escape 8.3 [0.33"] www.bannerengineering.com - tel: 763-544-3164 3 EZ-LIGHT(R) TL50 High Brightness Tower Light Wiring Diagram - 4-Pin Models Sourcing (PNP) Input Sinking (NPN) Input 3 Indicator Color 4 C1 18-30V dc 21-27V ac 1 C2/A 18-30V dc 21-27V ac 4 C1 1 2 3 4 = = = = Brown White Blue Black C1 = Color 1 C2 = Color 2 C3 = Color 3 A = Audible = = = = = Brown White Blue Black Gray C1 = Color 1 C2 = Color 2 C3 = Color 3 C4 = Color 4 A = Audible = = = = = = = = White Brown Green Yellow Gray Pink Blue Red C1 = Color 1 C2 = Color 2 C3 = Color 3 C4 = Color 4 C5 = Color 5 C6 = Color 6 C7 = Color 7 A = Audible 1 C2/A 2 C3/A Key: 3 Indicator Color 2 C3/A Pins 1 and 2 can activate the corresponding color or the audible function, if available. Wiring Diagram - 5-Pin Models Sourcing (PNP) Input Indicator Color C1 Sinking (NPN) Input 3 4 18-30V dc 21-27V ac Indicator Color C1 18-30V dc 21-27V ac 4 1 1 1 2 3 4 5 C2 C2 2 2 C3 C3 C4/A Key: 3 5 C4/A 5 Pin 5 can activate the corresponding color or the audible function, if available. Wiring Diagram - 8-Pin Models Sinking (NPN) Input Sourcing (PNP) Input Indicator Color C1 C2 C3 C4 C5/A C6/A C7/A 7 6 2 1 5 4 8 3 18-30V dc 21-27V ac Indicator Color C1 C2 C3 C4 C5/A C6/A C7/A Key: 7 6 18-30V dc 21-27V ac 2 1 5 1 2 3 4 5 6 7 8 4 8 3 Pins 3, 4 and 8 can activate the corresponding color or the audible function, if available. 4 www.bannerengineering.com - tel: 763-544-3164 P/N 152837 Rev. I EZ-LIGHT(R) TL50 High Brightness Tower Light Accessories Cordsets 4-Pin Threaded M12/Euro-Style Cordsets Model Length MQDC-406 1.83 m (6 ft) MQDC-415 4.57 m (15 ft) MQDC-430 9.14 m (30 ft) Style Dimensions Pinout 44 Typ. 3 4 Straight MQDC-450 2 1 M12 x 1 o 14.5 15.2 m (50 ft) 1 2 3 4 = = = = Brown White Blue Black 5-Pin Threaded M12/Euro-Style Cordsets (Single Ended) Model Length MQDC1-501.5 0.50 m (1.5 ft) MQDC1-506 1.83 m (6 ft) MQDC1-515 4.57 m (15 ft) MQDC1-530 9.14 m (30 ft) MQDC1-506RA 1.83 m (6 ft) MQDC1-515RA 4.57 m (15 ft) Style Dimensions 2 44 Typ. 1 3 Straight 4 M12 x 1 o 14.5 32 Typ. [1.26"] 5 1 2 3 4 5 = = = = = Brown White Blue Black Gray 30 Typ. [1.18"] Right-Angle MQDC1-530RA Pinout (Female) 9.14 m (30 ft) M12 x 1 o 14.5 [0.57"] 8-Pin Threaded M12/Euro-Style Cordsets with Open-Shield Model Length MQDC2S-806 1.83 m (6 ft) MQDC2S-815 4.57 m (15 ft) MQDC2S-830 9.14 m (30 ft) MQDC2S-850 15.2 m (50 ft) MQDC2S-806RA 1.83 m (6 ft) MQDC2S-815RA 4.57 m (15 ft) MQDC2S-830RA 9.14 m (30 ft) MQDC2S-850RA 15.2 m (50 ft) Style Dimensions Pinout 44 Typ. 2 Straight M12 x 1 o 14.5 32 Typ. [1.26"] 30 Typ. [1.18"] Right-Angle 1 7 6 3 4 8 5 1 = White 2 = Brown 3 = Green 4 = Yellow 5 = Gray 6 = Pink 7 = Blue 8 = Red M12 x 1 o 14.5 [0.57"] P/N 152837 Rev. I www.bannerengineering.com - tel: 763-544-3164 5 EZ-LIGHT(R) TL50 High Brightness Tower Light Mounting Brackets All measurements are in mm SMB30A * Right-angle bracket with curved slot for versatile orientation * Clearance for M6 (1/4 in) hardware * Mounting hole for 30 mm sensor * 12-ga. stainless steel 45 C 61 B A 69 Hole center spacing: A to B=40 Hole size: A=o 6.3, B= 27.1 x 6.3, C=o 30.5 SMB30FA * Swivel bracket with tilt and pan movement for precise adjustment * Mounting hole for 30 mm sensor * 12-ga. 304 stainless steel * Easy sensor mounting to extrude rail T-slot * Metric and inch size bolt available 83.2 36.3 68.9 B A Bolt thread: SMB30FA, A= 3/8 - 16 x 2 in; SMB30FAM10, A= M10 1.5 x 50 Hole size: B= o 30.1 SMB30MM * 12-ga. stainless steel bracket with curved mounting slots for versatile orientation * Clearance for M6 (1/4 in) hardware * Mounting hole for 30 mm sensor 57 70 C 57 B A Hole center spacing: A = 51, A to B = 25.4 Hole size: A = 42.6 x 7, B = o 6.4, C = o 30.1 SMBAMS30RA * Right-angle SMBAMS series bracket * 30 mm hole for mounting sensors * Articulation slots for 90+ rotation * 12-ga. (2.6 mm) cold-rolled steel 45 SMBAMS30P * Flat SMBAMS series bracket * 30 mm hole for mounting sensors * Articulation slots for 90+ rotation * 12-ga. 300 series stainless steel C A 93 B Hole center spacing: A=26.0, A to B=13.0 Hole size: A=26.8 x 7.0, B=o 6.5, C=o 31.0 45 C 53 A B 48 SMB30SC * Swivel bracket with 30 mm mounting hole for sensor * Black reinforced thermoplastic polyester * Stainless steel mounting and swivel locking hardware included 67 B 58 29 A Hole center spacing: A=o 50.8 Hole size: A=o 7.0, B=o 30.0 Hole center spacing: A=26.0, A to B=13.0 Hole size: A=26.8 x 7.0, B=o 6.5, C=o 31.0 LMB Sealed Right-Angle Bracket Model Description Construction LMB30RA LMB30RAC Black polycarbonate Direct-Mount Models: Bracket kit with base, 30 mm adapter, set screw, fasteners, o-rings, and gaskets LMBE12RA LMBE12RAC 6 Gray polycarbonate Black polycarbonate Pipe-Mount Models: Bracket kit with base, 1/2-14 pipe adapter, set screw, fasteners, orings, and gaskets. For use with stand-off pipe (listed and sold separately) Gray polycarbonate www.bannerengineering.com - tel: 763-544-3164 P/N 152837 Rev. I EZ-LIGHT(R) TL50 High Brightness Tower Light Elevated Mount System Model Features SA-M30TE12 - Black Acetal * * SA-M30TE12C - White UHMW * Polished 304 Stainless Steel Black Anodized Aluminum Clear Anodized Aluminum SOP-E12-150SS 150 mm (6 in) long SOP-E12-150A 150 mm (6 in) long SOP-E12-150AC 150 mm (6 in) long * * SOP-E12-300SS 300 mm (12 in) long SOP-E12-300A 300 mm (12 in) long SOP-E12-300AC 300 mm (12 in) long * * SOP-E12-900SS 900 mm (36 in) long SOP-E12-900A 900 mm (36 in) long SOP-E12-900AC 900 mm (36 in) long SA-E12M30 - Black Acetal * * SA-E12M30C - White UHMW * Components Streamlined black acetal or white UHMW standoff pipe adapter/cover Connects between 30 mm light base and 1/2 in. NPSM/DN15 pipe Mounting hardware included Elevated-use stand-off pipe (1/2 in. NPSM/DN15) Polished 304 stainless steel, black anodized aluminum, or clear anodized aluminum surface 1/2 in. NPT thread at both ends Compatible with most industrial environments Streamlined black acetal or white UHMW mounting base adapter/cover Connects between 1/2 in. NPSM/DN15 pipe and 30 mm (1-3/16 in) drilled hole Mounting hardware included Pipe Mounting Flange SA-F12 * Die-cast zinc base with black paint * For use elevated stand-off pipes (1/2 in, NPSM/DN15) * M5 mounting hardware and nitrile gasket included 1/2-14 NPSM 4x o5.5 10 o70 54 o28 Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. www.bannerengineering.com - tel: 763-544-3164