Datasheet
Multi-Color General-Purpose or Audible Indicators
• Similar in design and construction to standard TL50 Tower Lights, but
more than 4 times brighter, improving visibility in areas with high levels
of ambient light.
• Rugged, cost-effective, and easy-to-install multi-segment indicators
• Illuminated segments provide easy-to-see operator guidance and
indication of equipment status
• Displays up to 5 colors
• Available in black or light gray housing
• Audible models available with standard, sealed, or omni-directional
audible element
• Compact devices are completely self-contained - no controller needed
• 18 to 30 V dc or 24 V ac operation
• No assembly required
Non-Audible Models
Model1# of LED Colors LED Function2Connection3Inputs
TL50HRQ 1 Red
4-pin Euro integral QD connector
Bimodal (NPN or PNP)
TL50HGRQ 2 Green, Red
TL50HGYRQ 3 Green, Yellow, Red
TL50HBGYRQ 4 Blue, Green, Yellow, Red 5-pin Euro integral QD connector
TL50HWBGYRQ 5 White, Blue, Green, Yellow, Red 8-pin Euro integral QD connector
NOTE: Audible Models are listed on the next page.
For additional models and colors, visit Banner Engineering website at www.bannerengineering.com.
1Models with black housing are listed. For gray housing, add suffix C at the end of the model number (cabled models) or before the Q (QD
models), for example, TL50HRC or TL50HRCQ.
2The first color listed is the bottom color, going up in successive order. Contact the factory for other colors and color combinations
3Integral QD models only are listed; mating cordset required (see Cordsets on page 5).
• For 150 mm (5.9 in) PVC pigtail with QD, replace Q with QP in the model number, for example, TL50HRQP.
• For 2 m (6.5 ft) cable, omit suffix Q from the model number, for example, TL50HR.
EZ-LIGHT® TL50 High Brightness Tower
Light
Original Document
152837 Rev. I 9 April 2014
152837
Audible Models
Standard Audible Models4# of LED
Colors LED Function5Connection6Inputs
TL50HRAQ 1 Red 4-pin Euro integral QD
connector Bimodal
(NPN
or
PNP)
TL50HGRAQ 2 Green, Red
TL50HGYRAQ 3 Green, Yellow, Red 5-pin Euro integral QD
connector
TL50HBGYRAQ 4 Blue, Green, Yellow, Red 8-pin Euro integral QD
connector
Sealed Audible Models4# of LED
Colors LED Function5Connection6Inputs
Continuous Pulsed at 1.6 Hz Staccato
TL50HRALSQ TL50HRALS3Q TL50HRALS4Q 1 Red 4-pin Euro integral QD
connector Bimodal
(NPN
or
PNP)
TL50HGRALSQ TL50HGRALS3Q TL50HGRALS4Q 2 Green, Red
TL50HGYRALSQ TL50HGYRALS3Q TL50HGYRALS4Q 3 Green, Yellow, Red 5-pin Euro integral QD
connector
TL50HBGYRALSQ TL50HBGYRALS3Q TL50HBGYRALS4Q 4 Blue, Green, Yellow, Red 8-pin Euro integral QD
connector
Omni-Directional Sealed Audible Models4# of LED
Colors LED Function5Connection6Inputs
Continuous Pulsed at 1.6 Hz Staccato
TL50HRAOSQ TL50HRAOS3Q TL50HRAOS4Q 1 Red 4-pin Euro integral QD
connector Bimodal
(NPN
or
PNP)
TL50HGRAOSQ TL50HGRAOS3Q TL50HGRAOS4Q 2 Green, Red
TL50HGYRAOSQ TL50HGYRAOS3Q TL50HGYRAOS4Q 3 Green, Yellow, Red 5-pin Euro integral QD
connector
TL50HBGYRAOSQ TL50HBGYRAOS3Q TL50HBGYRAOS4Q 4 Blue, Green, Yellow, Red 8-pin Euro integral QD
connector
Omni-Directional Sealed Audible Models with Intensity
Adjustment4# of LED
Colors LED Function5Connection6Inputs
Continuous Pulsed at 1.6 Hz Staccato
TL50HRAOSIQ TL50HRAOS3IQ TL50HRAOS4IQ 1 Red 4-pin Euro integral QD
connector Bimodal
(NPN
or
PNP)
TL50HGRAOSIQ TL50HGRAOS3IQ TL50HGRAOS4IQ 2 Green, Red
TL50HGYRAOSIQ TL50HGYRAOS3IQ TL50HGYRAOS4IQ 3 Green, Yellow, Red 5-pin Euro integral QD
connector
TL50HBGYRAOSIQ TL50HBGYRAOS3IQ TL50HBGYRAOS4IQ 4 Blue, Green, Yellow, Red 8-pin Euro integral QD
connector
4Models with black housing are listed. For gray housing, add suffix C at the end of the model number (cabled models) or before the Q (QD
models), for example, TL50HRC or TL50HRCQ.
5The first color listed is the bottom color, going up in successive order. Contact the factory for other colors and color combinations
6Integral QD models only are listed; mating cordset required (see Cordsets on page 5).
• For 150 mm (5.9 in) PVC pigtail with QD, replace Q with QP in the model number, for example, TL50HRQP.
• For 2 m (6.5 ft) cable, omit suffix Q from the model number, for example, TL50HR.
EZ-LIGHT® TL50 High Brightness Tower Light
2 www.bannerengineering.com - tel: 763-544-3164 P/N 152837 Rev. I
Specifications
Supply Voltage and Current
18 to 30V dc (10% max. ripple); or 21 to 27 V ac
Indicators - max. current per LED color:
· at 18V dc: 100 mA
· at 30V dc: 60 mA
· at 21V ac: 80 mA
· at 27V ac: 70 mA
Standard Audible Alarm: 25 mA max. current
Sealed Audible Alarm: 35 mA max. current
Omni-Directional Sealed Audible Alarm: 45 mA max. current
Indicators
1 to 5 colors; Green, Red, Yellow, Blue, White;
LEDs are independently selected
Supply Protection Circuitry:
Protected against reverse polarity and transient voltages
Input Response Time
Indicator On/Off: 10 ms (max.)
Audible Adjustment
Standard Audible Alarm: Unscrew the cover (up to 1.5 turns
max.) to adjust the audible intensity. (Do not exceed 1.5 turns or
the cover may detach during operation.) For max. intensity, rotate
the center plug 180° counterclockwise to remove it.
Sealed Audible Alarm and Omni-Directional Sealed Audible
Alarm with Intensity Adjustment: Rotate the front cover until
the desired intensity is reached.
Omni-Directional Sealed Audible Alarm: No adjustment.
Vibration and Mechanical Shock:
All models meet Mil. Std. 202F requirements method 201A
(vibration: 10 to 60 Hz max., double amplitude 0.06 in, maximum
acceleration 10G). Also meets IEC 947-5-2; 30G 11 ms duration,
half sine wave.
Connections
Integral 4-pin, 5-pin, or 8-pin M12/Euro-style QD, 150 mm (5.9 in) PVC
pigtail with QD, or 2 m (6.5 ft) integral cable, depending on model
Operating Conditions:
Non-Audible:−40 °C to +50 °C (−40 °F to +122 °F)
Standard and Sealed Audible: −20 °C to +50 °C (−4 °F to +122 °F)
Max. Rel. Humidity: 95% at 50º C (non-condensing)
Audible Alarm
Standard Audible Alarm: 2.7 KHz ± 500 Hz oscillation frequency; max.
intensity 92 db at 1 m (3.3 ft) (typical)
Sealed Audible Alarm: 2.9 KHz ± 250 Hz oscillation frequency; max.
intensity 94 db at 1 m (3.3 ft) (typical)
Omni-Directional Sealed Audible Alarm: 2.1 KHz ± 250 Hz oscillation
frequency; max intensity 99 db at 1m (3.3 ft) (typical)
Omni-Directional Sealed Audible Alarm with Intensity Adjustment:
2.1 KHz ± 250 Hz oscillation frequency; max intensity 95 dB at 1m (3.3 ft)
(typical)
Construction:
Bases and Covers: ABS
Light Segment: Polycarbonate
Environmental Rating
Non-Audible and Sealed Audibles: IEC IP67
Standard Audible:IEC IP50
Certifications
M30 x 1.5
(mounting nut
included)
Internal Threads
1/2–14 NPSM
Max Torque 2.25 Nm
[20in–lbf]
50.0 [1.97"]
H
19.0 [0.75"]
8.3 [0.33"]
# of
Color
s
Tower Height (H)
Non-Audible Standard Audible* Sealed Audible Omni-Directional
Sealed Audible
1 61.2 mm (2.4 in) 92.0 mm (3.6 in) 115.1 mm (4.5 in) 129.1 mm (5.1 in)
2 101.9 mm (4.0 in) 132.7 mm (5.2 in) 155.8 mm (6.1 in) 169.8 mm (6.7 in)
3 142.6 mm (5.6 in) 173.4 mm (6.8 in) 196.5 mm (7.7 in) 210.5 mm (8.3 in)
4 183.3 mm (7.2 in) 214.1 mm (8.4 in) 237.2 mm (9.3 in) 251.2 mm (9.9 in)
5 224.0 mm (8.8 in) - - -
* Tower height (H) with top unscrewed approximately 3.5 mm to allow sound to escape
EZ-LIGHT® TL50 High Brightness Tower Light
P/N 152837 Rev. I www.bannerengineering.com - tel: 763-544-3164 3
Wiring Diagram – 4-Pin Models
Sourcing (PNP) Input
Indicator
Color
3
4
1
2
C2/A
C3/A
C1
18-30V dc
21-27V ac
Sinking (NPN) Input
Indicator
Color
3
4
1
2
C1
C2/A
C3/A
18-30V dc
21-27V ac
Key:
1 = Brown
2 = White
3 = Blue
4 = Black
C1 = Color 1
C2 = Color 2
C3 = Color 3
A = Audible
Pins 1 and 2 can activate the corresponding color or the audible function, if available.
Wiring Diagram – 5-Pin Models
Sourcing (PNP) Input
Indicator
Color
C2
C3
C1
C4/A
3
4
1
2
5
18-30V dc
21-27V ac
Sinking (NPN) Input
Indicator
Color
C2
C3
C1
C4/A
3
4
1
2
5
18-30V dc
21-27V ac
Key:
1 = Brown
2 = White
3 = Blue
4 = Black
5 = Gray
C1 = Color 1
C2 = Color 2
C3 = Color 3
C4 = Color 4
A = Audible
Pin 5 can activate the corresponding color or the audible function, if available.
Wiring Diagram – 8-Pin Models
Sourcing (PNP) Input
7
6
2
1
5
4
8
3
18-30V dc
21-27V ac
Indicator
Color
C1
C2
C3
C4
C5/A
C6/A
C7/A
Sinking (NPN) Input
7
6
2
1
5
4
8
3
18-30V dc
21-27V ac
Indicator
Color
C1
C2
C3
C4
C5/A
C6/A
C7/A
Key:
1 = White
2 = Brown
3 = Green
4 = Yellow
5 = Gray
6 = Pink
7 = Blue
8 = Red
C1 = Color 1
C2 = Color 2
C3 = Color 3
C4 = Color 4
C5 = Color 5
C6 = Color 6
C7 = Color 7
A = Audible
Pins 3, 4 and 8 can activate the corresponding color or the audible function, if available.
EZ-LIGHT® TL50 High Brightness Tower Light
4 www.bannerengineering.com - tel: 763-544-3164 P/N 152837 Rev. I
Accessories
Cordsets
4-Pin Threaded M12/Euro-Style Cordsets
Model Length Style Dimensions Pinout
MQDC-406 1.83 m (6 ft)
Straight
44 Typ.
ø 14.5
M12 x 1
2
3
4
1
1 = Brown
2 = White
3 = Blue
4 = Black
MQDC-415 4.57 m (15 ft)
MQDC-430 9.14 m (30 ft)
MQDC-450 15.2 m (50 ft)
5-Pin Threaded M12/Euro-Style Cordsets (Single Ended)
Model Length Style Dimensions Pinout (Female)
MQDC1-501.5 0.50 m (1.5 ft)
Straight
44 Typ.
ø 14.5
M12 x 1
2
3
4
1
5
1 = Brown
2 = White
3 = Blue
4 = Black
5 = Gray
MQDC1-506 1.83 m (6 ft)
MQDC1-515 4.57 m (15 ft)
MQDC1-530 9.14 m (30 ft)
MQDC1-506RA 1.83 m (6 ft)
Right-Angle
32 Typ.
[1.26"]
30 Typ.
[1.18"]
ø 14.5 [0.57"]
M12 x 1
MQDC1-515RA 4.57 m (15 ft)
MQDC1-530RA 9.14 m (30 ft)
8-Pin Threaded M12/Euro-Style Cordsets with Open-Shield
Model Length Style Dimensions Pinout
MQDC2S-806 1.83 m (6 ft)
Straight
44 Typ.
ø 14.5
M12 x 1
5
4
3
2
8
1
7
6
1 = White
2 = Brown
3 = Green
4 = Yellow
5 = Gray
6 = Pink
7 = Blue
8 = Red
MQDC2S-815 4.57 m (15 ft)
MQDC2S-830 9.14 m (30 ft)
MQDC2S-850 15.2 m (50 ft)
MQDC2S-806RA 1.83 m (6 ft)
Right-Angle
32 Typ.
[1.26"]
30 Typ.
[1.18"]
ø 14.5 [0.57"]
M12 x 1
MQDC2S-815RA 4.57 m (15 ft)
MQDC2S-830RA 9.14 m (30 ft)
MQDC2S-850RA 15.2 m (50 ft)
EZ-LIGHT® TL50 High Brightness Tower Light
P/N 152837 Rev. I www.bannerengineering.com - tel: 763-544-3164 5
Mounting Brackets
All measurements are in mm
SMB30A
• Right-angle bracket with
curved slot for versatile
orientation
• Clearance for M6 (¼ in)
hardware
• Mounting hole for 30 mm
sensor
• 12-ga. stainless steel
45
61
69
A
B
C
Hole center spacing: A to B=40
Hole size: A=ø 6.3, B= 27.1 x 6.3, C=ø 30.5
SMB30FA
• Swivel bracket with tilt and
pan movement for precise
adjustment
• Mounting hole for 30 mm
sensor
• 12-ga. 304 stainless steel
• Easy sensor mounting to
extrude rail T-slot
• Metric and inch size bolt
available
A
B68.9
36.3
83.2
Bolt thread: SMB30FA, A= 3/8 - 16 x 2 in; SMB30FAM10, A= M10 -
1.5 x 50
Hole size: B= ø 30.1
SMB30MM
• 12-ga. stainless steel bracket
with curved mounting slots
for versatile orientation
• Clearance for M6 (¼ in)
hardware
• Mounting hole for 30 mm
sensor
70
57
A
B
C
57
Hole center spacing: A = 51, A to B = 25.4
Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1
SMBAMS30P
• Flat SMBAMS series bracket
• 30 mm hole for mounting
sensors
• Articulation slots for 90°+
rotation
• 12-ga. 300 series stainless
steel
45
93 A
C
B
Hole center spacing: A=26.0, A to B=13.0
Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø 31.0
SMBAMS30RA
• Right-angle SMBAMS series
bracket
• 30 mm hole for mounting
sensors
• Articulation slots for 90°+
rotation
• 12-ga. (2.6 mm) cold-rolled
steel
53
48
45
A
C
B
Hole center spacing: A=26.0, A to B=13.0
Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø 31.0
SMB30SC
• Swivel bracket with 30 mm
mounting hole for sensor
• Black reinforced
thermoplastic polyester
• Stainless steel mounting and
swivel locking hardware
included
67
58
29
B
A
Hole center spacing: A=ø 50.8
Hole size: A=ø 7.0, B=ø 30.0
LMB Sealed Right-Angle Bracket
Model Description Construction
LMB30RA
Direct-Mount Models: Bracket kit with base,
30 mm adapter, set screw, fasteners, o-rings,
and gaskets
Black polycarbonate
LMB30RAC Gray polycarbonate
LMBE12RA
Pipe-Mount Models: Bracket kit with base,
½-14 pipe adapter, set screw, fasteners, o-
rings, and gaskets. For use with stand-off pipe
(listed and sold separately)
Black polycarbonate
LMBE12RAC Gray polycarbonate
EZ-LIGHT® TL50 High Brightness Tower Light
6 www.bannerengineering.com - tel: 763-544-3164 P/N 152837 Rev. I
Elevated Mount System
Model Features Components
SA-M30TE12 - Black Acetal • Streamlined black acetal or white UHMW stand-
off pipe adapter/cover
• Connects between 30 mm light base and ½ in.
NPSM/DN15 pipe
• Mounting hardware included
SA-M30TE12C - White UHMW
Polished 304
Stainless Steel Black Anodized
Aluminum Clear Anodized
Aluminum
• Elevated-use stand-off pipe (½ in. NPSM/DN15)
• Polished 304 stainless steel, black anodized
aluminum, or clear anodized aluminum surface
• ½ in. NPT thread at both ends
• Compatible with most industrial environments
SOP-E12-150SS
150 mm (6 in) long SOP-E12-150A
150 mm (6 in) long SOP-E12-150AC
150 mm (6 in) long
SOP-E12-300SS
300 mm (12 in) long SOP-E12-300A
300 mm (12 in) long SOP-E12-300AC
300 mm (12 in) long
SOP-E12-900SS
900 mm (36 in) long SOP-E12-900A
900 mm (36 in) long SOP-E12-900AC
900 mm (36 in) long
SA-E12M30 - Black Acetal • Streamlined black acetal or white UHMW
mounting base adapter/cover
• Connects between ½ in. NPSM/DN15 pipe and 30
mm (1-3/16 in) drilled hole
• Mounting hardware included
SA-E12M30C - White UHMW
Pipe Mounting Flange
SA-F12
• Die-cast zinc base with black paint
• For use elevated stand-off pipes (½ in, NPSM/DN15)
• M5 mounting hardware and nitrile gasket included
10
ø28
ø70
1/2-14
NPSM 4x ø5.5
54
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp.
will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty
period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION,
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE
OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE
LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER
ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product
previously manufactured by Banner Engineering Corp.
EZ-LIGHT® TL50 High Brightness Tower Light
www.bannerengineering.com - tel: 763-544-3164
