Micropower Voltage Reference CORPORATION CA1004 FEATURES * Very Tight Initial Voltage Tolerance * * * 1004-1.2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5mV 1004-2.5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10mV Very Low Operating Current 1004-1.2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10A 1004-2.5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20A Wide Operating Current Range . . . . . . . . 10A to 20mA Very Low Dynamic Impedence. . . . . . . . . . . . . 0.6 Max. PRODUCT DESCRIPTION The CA1004 is a two-terminal, temperature compensated, micropower band-gap voltage reference, which provides a fixed voltage for a wide range of input currents (10A to 20mA). The high stability of the device is primarily the result of the low temperature coefficient Thin Film Resistor process and the tight output voltage tolerance is obtained by resistor Laser trimming at the wafer level. This gives the benefit of eliminating the need of external voltage adjustment. ORDERING INFORMATION Part CA1004N1 (1.2) CA1004BY1 (1.2) CA1004N2 (2.5) CA1004BY2 (2.5) Package Max Tempco (ppm/ oC) TO-92 SOIC TO-92 SOIC 100 100 100 100 PIN CONFIGURATIONS SO-8 TO-92 + 3 2 NC NC NC 8 7 6 5 1 2 3 4 NC NC NC 1 TO-92 (N-SUFFIX) BOTTOM VIEW SO PACKAGE (Y-SUFFIX) BOTTOM VIEW - Temp Range 0oC to +70oC -40oC to +85oC 0oC to +70oC -40oC to +85oC CA1004 CORPORATION ABSOLUTE MAXIMUM RATINGS Forward Current. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10mA Reverse Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30mA Operating Temperature Range TO-92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0oC to +70oC SOIC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40oC to +85oC Storage Temperature Range TO-92 . . . . . . . . . . . . . . . . . . . . . . . . . . -65oC to +150oC SOIC. . . . . . . . . . . . . . . . . . . . . . . . . . . -65oC to +150oC Lead Temperature (10 sec.). . . . . . . . . . . . . . . . . . . . . +300oC SPECIFICATIONS: At I in = 100A and TA = +25oC unless otherwise specified. CA1004 PARAMETERS UNITS CONDITIONS MIN TYP MAX 1.235 2.480 1.25 2.500 1.265 2.520 V 1004-1, 2 1004-2, 5 Min Operating Current 10 20 A 1004-1, 2 1004-2, 5 Output Voltage Change With Current 2.0 20 mV 10A Iin 1mA 1mA Iin 20mA Temperature Coefficient 100 ppm/oC Dynamic Impedence 1.0 Output Voltage Wide Band Noise 60 V Long Term Stability 20 ppm/KHr 10Hz f 10KHz TA = 25oC .1oC