3 Silect (High Frequency Transistors Case Outlines 2:54 Lead diameter is not controlled in this area Dimensions in mm Device Type Maximum Ratings (Case outline| BV BV OT hFE fT MHz N.F. Cre} Yfe Alternative Application in brackets) CBO CEO/IC Ic VCE IC VCEltyp Case Outlines Notes Vv Vo mA] mW [min. max. mA V {| min. typ mA V [dB fMHz| pF | mMho NPN BF594 (9). | 30 20 | 30] 250] 65 220 1 10. . 260 14 10/40 100] 0.95 | BF594, 5, 6, 7 | Radio and T.V..Sound |.F. amplifiers / are directly replaces BF194 BF595 (9) | 30 20 130) 250] 35 125 1 10 ~ 200 1 10 14.0 100] 0.95 ~ Lockfit Radio and T.V. Sound I.F. amplifiers compatible directly replaces BF195 BFS97 (9) | 40 25 130] 360 | 38 7 10 550 .5 10] - {/ 0.30 170 Video |.F. amplifier stages in T.V. / directly replaces BF197 2N4996 (2) | 30 18{50].250 | 50 2 10] 600 96 2 10/25 100] 70 T1S62A (2) | 30 12]30] 500 | 30 225 4 101] 500 950 4 10/40 100] 1.3 2N918 piastic equivalent NPN BF357K (2) | 30 15 | 50] 200] 20 350 6& 641200 2000 5 6/4 450] 0.85 41 Wide Band amplifiers up to 800 MHz Antenna amplifier for T.V. and f.m. Radio PNP BF576 (1) | 20 15 }50] 200] 30 10 10 120010 10] ] 2.0 | BFS76TOS (3)| Wide band amps as above A5T4260 (2)] 15 15 | 30]; 500] 30 150 10 1 11600 2000 10 10]/3.3 450] 2.5 High speed switch Darlingtons Maximum Ratings PTOT Device Type hFE VCE (sat) min.. (case outline | Polarity | BV BV | Cont | Free air fT Notes in brackets) cso CEO Ic | @ 25C ic VCE max. Ic 18 Vv Vv A mw min. mA v Vv mA mA {| MHz TPSA13 (5) NPN 30 30 0.4 625 10,000 100 5 1.5 100 0.1 125 General purpose types TPSA14 (5) NPN 30 30 0.4 625 20,000 100 5} 15 100 0.1 125 BC516 (2) PNP 40 30 0.4 625 30,000 20 2 1.0 100 0.1 250 TIS150 (5) } NPN 50 40 1.0 625 20,000 200 5 14 200 390.2 150 hFE 10,000 at IC 1A TIS151 (5) NPN 80 55 1.0 625 10,000 200 5 141 200 0.2 150 hFE 4,000 at IC 1A NN % Pins may be round or rectangular TO-92 Outlines 1, 4, 5, 6,10 & 11 4-3 min [$-3 max 4-1 +0-25 * ead diameter and lead form is not controlled in this area * Pins may be round or rectangular eran Dimensions in mm Outlines 2, 7 & 12 to TO-18 pin circle Notes: (A) Leads to be paraliel to within 0-1 of body. (B) Two leads joggied to lie on diameter base line of pitch circle 0-200 diameter. Dimensions in inches 3 Pins may be round or rectangular Outline 3 Preformed to TO-5