Nort h Am erica: Tel. (800) 366-2266, Fax (800) 618-8883
Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298
Europe: Tel. +44 (1344) 86 9 595, Fax+44 (134 4) 30 0 020
Specifications subject to change without notice.
Visit ww w. macom.com for ad ditional data shee ts an d pr o d uct inf or m ati o n.
V 1.0
Functional Block Diagram
Ordering Information
Part Number Package
MAAPSS0005 FQFP-N 5.0 mm Plastic Package
MAAPSS0005TR Forward Tape and Reel1
MAAPSS0005RTR Reverse Tape and Reel1
1. If specific reel si ze is required, consult f act ory for part number
assignment.
Features
•High gain, 3-stage amplifier
•50 ohm input and output
•Low external part count
•3 Volt supply
•Miniature FQFP-N 5-mm plastic p ackage
Description
M/A-COM’s MAAPSS0005 power amplifier IC is internally
matched to 50 ohms at both the input and output and requires no
external matching components, making it as easy to design in as
a module, yet smaller for easier handling and reduced board
space. Analog signals control output power and power-off for
active and standby modes.
M/A-COM designed the MAAPSS0005 to function along side
the MAAPSS0004 in multi-band GSM./DCS phones with 3-volt
supplies. GPRS capability is fully supported.
M/A-COM fabricates the MAAPSS0005 using it’s proprietary
iHBT InGaP/GaAs HBT power amplifier process, which
provides high reliabity, efficiency, linearity, and consistent
performan ce at low cost.
MAAPSS0005
3V DCS/GPRS RF Power Amplifier
1710 - 1785 MHz
1
Parameter Test Conditions Units Min. Typ. Max.
RF Frequency MHz 1710 1785
Input Impedance Ω 50
Output Impedance Ω 50
Control Voltage Ranger V 0.2 2.7
Input VSWR 3.5:1
Output power, nominal conditi ons dBm +33.0
Output power, extreme conditions VCC =3.2V, TC = +85°C, PIN = +3 dB m dBm +32.0
Power added effici ency POUT = +33.0 dBm % 45
Isolation VCTRL = +0.2V, PIN = +8 dBm dB 39
Harmonics n*ƒ0 dBc -35
Duty cycle POUT = +33.0 dBm % 50 100
Noise Power 1805 MHz < ƒ < 1880 MHz, RBW = 100 kHz dBm -77
Stability +3.0 V < VCC < +5.5 V, POUT < +33. 0 dBm, VSWR < 6:1,-25 ºC <
TC < +85 ºC, RBW = 3 MHz max hold All spurs <-36dBm
Ruggedness +3.0 V < VCC < +5.5 V, POUT < +33. 0 dBm, VSWR < 10:1
Off current VCTRL = +0.2 V µA 20
Control current VCTRL = +2.7 V mA 5
No permanent damage
Electrical Specifications: TC = +35°C, VCC = +3.5V, PIN = +5 dBm
Preliminary
15
43
2
6
10
9
8
7
15 11
1213
14
20
16
17
18
19
RFin
Vcc1 Vcc2 Vcc2
Gnd
Gnd
RFout
RFout
GND
Vcc3
Vctrl2
Vctrl1
Gnd
V Control
Gnd
Loop1 Loop2
Vcc
Gnd
Vctrl3
Gnd