TDL 3-4822 - TRACO ELECTRONIC AG

http://www.tracopower.com Page 1 of 3

DC/DC Converter TDL 3 Series, 3 Watt

Models

• Compact 3W Converter

in DIP package

• I/O-isolation 1‘500 VDC

• Fully regulated outputs

• Wide 2 : 1 input voltage range

• Operating temperature range

-40°C to +80°C

• Short circuit protection

• 3-year product warranty

The TDL 3 series with 2:1 input voltage range is a selection of 3 Watt

regulated dc/dc-converters. They come in a very compact DIP package

(0.55  0.55  0.31 inch).

Order code Input voltage Output voltage Output current max. Efﬁciency typ.

TDL 3-0510 3.3 VDC 600 mA 79 %

TDL 3-0511 5.0 VDC 600 mA 81 %

TDL 3-0512 12 VDC 250 mA 85 %

TDL 3-0513 4.5 – 10 VDC 15 VDC 200 mA 85 %

TDL 3-0521 (5 VDC nominal) ±5.0 VDC ±300 mA 82 %

TDL 3-0522 ±12 VDC ±125 mA 84 %

TDL 3-0523 ±15 VDC ±100 mA 85 %

TDL 3-1210 3.3 VDC 600 mA 80 %

TDL 3-1211 5.0 VDC 600 mA 83 %

TDL 3-1212 12 VDC 250 mA 87 %

TDL 3-1213 9 – 18 VDC 15 VDC 200 mA 87 %

TDL 3-1221 (12 VDC nominal) ±5.0 VDC ±300 mA 84 %

TDL 3-1222 ±12 VDC ±125 mA 86 %

TDL 3-1223 ±15 VDC ±100 mA 87 %

TDL 3-2410 3.3 VDC 600 mA 80 %

TDL 3-2411 5.0 VDC 600 mA 83 %

TDL 3-2412 12 VDC 250 mA 87 %

TDL 3-2413 18 – 36 VDC 15 VDC 200 mA 87 %

TDL 3-2421 (24 VDC nominal) ±5.0 VDC ±300 mA 84 %

TDL 3-2422 ±12 VDC ±125 mA 86 %

TDL 3-2423 ±15 VDC ±100 mA 87 %

TDL 3-4810 3.3 VDC 600 mA 79 %

TDL 3-4811 5.0 VDC 600 mA 82 %

TDL 3-4812 12 VDC 250 mA 86 %

TDL 3-4813 36 – 75 VDC 15 VDC 200 mA 86 %

TDL 3-4821 (48 VDC nominal) ±5.0 VDC ±300 mA 82 %

TDL 3-4822 ±12 VDC ±125 mA 85 %

TDL 3-4823 ±15 VDC ±100 mA 85 %

Models

TDL 3 Series, 3 Watt

http://www.tracopower.com Page 2 of 3

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

Input Specifications

Input current no load 5 Vin models: 45 mA typ.

12 Vin models: 27 mA typ.

24 Vin models: 16 mA typ.

48 Vin models: 10 mA typ.

Surge voltage (1 sec. max.) 5 Vin models: 12 V max.

12 Vin models: 25 V max.

24 Vin models: 50 V max.

48 Vin models: 100 V max.

Start-up voltage 5 Vin models: 4.5 VDC max.

12 Vin models: 9.0 VDC max.

24 Vin models: 18 VDC max.

48 Vin models: 36 VDC max.

Input filter internal capacitor

Conducted noise EN 55022 class A or B (with ext. components)

ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV,

perf. criteria A

Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A

Fast transient / surge (with external input capacitor) EN 61000-4-4, ±2 kV, perf. criteria A

EN 61000-4-5, ±1 kV perf. criteria A

–external input capacitor all models: Nippon chemi-con KY 220µF/100V

Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A

Magnetic field immunity EN 61000-4-8, 3 A/m, perf. criteria A

Output Specifications

Voltage set accuracy ±1.5 % max.

Voltage balance (dual output models) 2 % max.

Regulation – Input variation 0.2 % max.

– Load variation 0 – 100 % 1 % max.

dual output: 2 % max. (balanced load)

cross regulation - dual output: 5 % max. (asymmetrical load 25 % / 100 %)

Minimum load no minimum load required

Ripple and noise (20 MHz Bandwidth) 70 mVp-p typ.

Transient response – Recovery time ( 25% load step change) 500 µs max.

– Response deviation ( 25% load step change) 5 % max.

Short circuit protection continuous, automatic recovery

Over load protection at 170 % of Iout nom. (foldback)

Capacitive load –Single output all models: 100 F max.

–Dual output all models: 100 F max. (each output)

General Specifications

Temperature ranges – Operating (convection cooling 20LFM, 0,1m/s) –40°C to +70°C (without derating)

– Case temperature +95°C max.

– Storage temperature –50°C to +125°C

Derating 4.0 %/K above 70°C

Humidity (non condensing) 95 % rel H max.

Isolation voltage – I/O isolation voltage (60 sec.) 1’500 VDC

Isolation capacitance (input/output) 100 pF typ.

Isolation resistance (input/output) >1 Gohm

Altitude during operation 5’000 m

Temperature coefficient ±0.02 %/K max.

TDL 3 Series, 3 Watt

www.tracopower.com

Page 3 of 3

Rev. March 06. 2017

General Specifications (continued)

Reliability, calculated MTBF (MIL-HDBK-217F at +25°C, ground benign) >3‘450‘000 h

Switching frequency 100 kHz min.

Safety standards UL 60950-1

IEC/EN 60950 -1

– Certification documents www.tracopower.com/overview/tdl3

Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf

– RoHS RoHS directive 2011/65/EU

Physical Specifications

Casing material non-conducting black plastic (UL 94V-0 rated)

Potting material Silicone (UL 94V-0 rated)

Pin material tinned copper

Package weight 3.9 g (0.137 oz)

Soldering temperature max. 260°C / 10 sec.

Outline Dimensions

Pin Single Dual

1–Vin (GND) –Vin (GND)

4+Vin (Vcc) +Vin (Vcc)

5+Vout +Vout

6no pin Common

7–Vout –Vout

Pin-Out

Dimensions in [mm], () = Inch

Tolerances: x.x ±0.5 (±0.02)

x.xx ±0.25(±0.01)

pin dimension tolerance ±0.05 (±0.002)

3.1

(0.12)

7.75

(0.30)

8.0

(0.31)

0.5

(0.02)

14.0

(0.55)

7.62

(0.30)

3 x 2.54

(3 x 0.10)

bottom view

1 4

567

14.0

(0.55)

7.62

(0.30)

3.19

(0.13)

3.19

(0.13)