SIDACtor® Protection Thyristors
1
Revised: 08/11/14
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
SLIC Protection
Fixed Voltage Series, DO-214
Fixed Voltage Series - DO-214
Electrical Characteristics
Fixed Voltage Series DO-214 are uni-directional SIDACtor®
devices designed to protect SLICs (Subscriber Line
Interface Circuit) from damaging overvoltage transients.
The series provides single line protection using a fixed
voltage switching device for negative surges. All positive
surges are routed through an internal diode to a ground
reference.
Description
Applicable Global Standards
Features and Benefits
• Low voltage overshoot
• Low on-state voltage
• Does not degrade surge
capability after multiple
surge events within
limit.
• Fails short circuit when
surged in excess of
ratings
• Integrated diode for
positive voltage surges
• 2nd level interconnect is
Pb-free per IPC/JEDEC
J-STD-609A.01
Agency Approvals
Agency Agency File Number
E133083
Schematic Symbol
Pinout Designation
(T/R) (G)
Part Number Marking
VDRM
@lDRM=5µA
VS
@100V/µs IHISIT
VT
@IT=2.2 Amps VF
Capacitance
@1MHz, -2V bias
V min V max mA min mA
max A max V max V max pF
pF min pF max
P0641SALRP P61A 58 77 120 800 2.2 4 5 50 90
P0721SALRP P71A 65 88 120 800 2.2 4 5 45 85
P0901SALRP P91A 75 98 120 800 2.2 4 5 45 80
P1101SALRP P01A 95 130 120 800 2.2 4 5 40 70
P1301SALRP P131A 120 160 120 800 2.2 4 5 40 70
P1701SALRP P17A 160 200 120 800 2.2 4 5 30 55
P0641SCLRP P61C 58 77 120 800 2.2 4 5 65 200
P0721SCLRP P71C 65 88 120 800 2.2 4 5 60 190
P0901SCLRP P91C 75 98 120 800 2.2 4 5 60 180
P1101SCLRP P01C 95 130 120 800 2.2 4 5 50 160
P1301SCLRP P131C 120 160 120 800 2.2 4 5 50 160
P1701SCLRP P17C 160 200 120 800 2.2 4 5 40 130
P1101SDLRP P01D 95 130 120 800 2.2 4 5 50 160
P1301SDLRP P131D 120 160 120 800 2.2 4 5 50 160
Indicates cathode • TIA-968-A
• TIA-968-B
• ITU K.20/21 Enhanced
Level
• ITU K.20/21 Basic Level
• GR 1089 Inter-building*
• GR 1089 Intra-building*
• IEC 61000-4-5
• YD/T 1082
• YD/T 993
• YD/T 950
*A-rated parts require series resistance
Notes:
- Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted).
- Devices are uni-directional
RoHS
e3
Pb
SIDACtor® Protection Thyristors
2
Revised: 08/07/14
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
SLIC Protection
Fixed Voltage Series, DO-214
Surge Ratings
Series
IPP ITSM
50/60 Hz di/dt
0.2x310 1
0.5x700 2
2x10 1
2x10 2
8x20 1
1.2x50 2
10x160 1
10x160 2
10x560 1
10x560 2
5x320 1
9x720 2
10x360 1
10x360 2
10x1000 1
10x1000 2
5x310 1
10x700 2
A min A min A min A min A min A min A min A min A min A min A/µs max
A 20 150 150 90 50 75 75 45 75 20 500
C50 500 400 200 150 200 175 100 200 30 500
D — 1000 800 — — — — 200 — 50 1000
Package Symbol Parameter Value Unit
DO-214AA TJOperating Junction Temperature Range -40 to +150 °C
TSStorage Temperature Range -65 to +150 °C
R0JA Thermal Resistance: Junction to Ambient 90 °C/W
Thermal Considerations
Notes:
1 Current waveform in µs
2 Voltage waveform in µs
50
100
0
trtd
0
Peak
Value
Half Value
t – Time (µs)
IPP – Peak Pulse Current – %IPP
tr = rise time to peak value
td = decay time to half value
Waveform = tr x td
V-I Characteristics tr x td Pulse Waveform
25°C
Case Temperature (T
C
) - ºC
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
-40 -20 020406080100 120140 160
Ratio of I
H
I
H
(T
C
= 25ºC)
Normalized VS Change vs. Junction Temperature
Normalized DC Holding Current vs. Case Temperature
I
H
I
DRM
V
DRM
V
T
+V
+I
V
S
I
S
I
T
V
F
-V
-I
- Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product.
- IPP ratings applicable over temperature range of -40ºC to +85ºC
- The device must initially be in thermal equilibrium with -40°C < TJ < +150°C
-8
-40 -20 020406080100 120140 160
-6
-4
0
2
4
6
8
10
12
14
Junction Temperature (T
J
) – °C
Percent of V
S
Change – %
25 °C
SIDACtor® Protection Thyristors
3
Revised: 08/07/14
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
SLIC Protection
Fixed Voltage Series, DO-214
Part Marking
Part Numbering
Time
Temperature
T
P
T
L
T
S(max)
T
S(min)
25
t
P
t
L
t
S
time to peak temperature
(t 25ºC to peak)
Ramp-down
Ramp-up
Preheat
Critical Zone
T
L
to T
P
Figure 1
Soldering Parameters
Physical Specifications Environmental Specifications
Lead Material Copper Alloy
Terminal Finish 100% Matte-Tin Plated
Body Material UL recognized epoxy meeting ammability
classication 94V-0
XXXXX
Part number code
(refer to Electrical Characteristics table)
Date code
XXXXX
Cathode Indicator
DO-214 PM for pg. 94 Fixed Voltage Series.eps
CONSTRUCTION VARIABLE
P: SIDACtor
REEL PACK
I
PP
RATING
L: RoHS COMPLIANT
DEVICE TYPE
P XLRP
MEDIAN VOLTAGE
PACKAGE TYPE
xxx 1S
High Temp Voltage
Blocking
80% Rated VDRM (VAC Peak ) +125°C or +150°C,
504 or 1008 hrs. MIL-STD-750 (Method 1040)
JEDEC, JESD22-A-101
Temp Cycling
-65°C to +150°C, 15 min. dwell, 10 up to 100
cycles. MIL-STD-750 (Method 1051) EIA/JEDEC,
JESD22-A104
Biased Temp &
Humidity
52 VDC (+85°C) 85%RH, 504 up to 1008 hrs. EIA/
JEDEC, JESD22-A-101
High Temp Storage +150°C 1008 hrs. MIL-STD-750 (Method 1031)
JEDEC, JESD22-A-101
Low Temp Storage -65°C, 1008 hrs.
Thermal Shock
0°C to +100°C, 5 min. dwell, 10 sec. transfer,
10 cycles. MIL-STD-750 (Method 1056) JEDEC,
JESD22-A-106
Autoclave (Pressure
Cooker Test)
+121°C, 100%RH, 2atm, 24 up to 168 hrs. EIA/
JEDEC, JESD22-A-102
Resistance to Solder
Heat +260°C, 30 secs. MIL-STD-750 (Method 2031)
Moisture Sensitivity
Level
85%RH, +85°C, 168 hrs., 3 reow cycles
(+260°C Peak). JEDEC-J-STD-020, Level 1
Reflow Condition Pb-Free assembly
(see Fig. 1)
Pre Heat
- Temperature Min (Ts(min))+150°C
- Temperature Max (Ts(max))+200°C
- Time (Min to Max) (ts)60-180 secs.
Average ramp up rate (Liquidus Temp (TL)
to peak) 3°C/sec. Max.
TS(max) to TL - Ramp-up Rate 3°C/sec. Max.
Reflow
- Temperature (TL) (Liquidus) +217°C
- Temperature (tL)60-150 secs.
Peak Temp (TP)+260(+0/-5)°C
Time within 5°C of actual Peak Temp (tp)30 secs. Max.
Ramp-down Rate 6°C/sec. Max.
Time 25°C to Peak Temp (TP)8 min. Max.
Do not exceed +260°C
SIDACtor® Protection Thyristors
4
Revised: 08/07/14
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
SLIC Protection
Fixed Voltage Series, DO-214
Package Type Description Quantity Added Suffix Industry Standard
SDO-214AA
Tape & Reel Pack 2500 RP EIA-481-D
Packing Options
Tape and Reel Specification — DO-214AA
0.472
(12.0) 0.36
(9.2)
0.315
(8.0)
0.157
(4.0)
0.49
(12.4)
0.512 (13.0)
Arbor Hole Dia.
12.99
(330.0) Dimensions are in inches
(and millimeters).
Direction of Feed
0.059 DIA
(1.5) Cover tape
Cathode
Dimensions — DO-214AA
0.079
(2.0)
0.110
(2.8)
0.079
(2.0)
Pad Outline
(MM)
H
K
E
F
G
AC
B
D
Case
Temperature
Measurement
Point
Dimensions are in inches
(and millimeters).
Cathode Indicator
Dimensions Inches Millimeters
Min Max Min Max
A 0.130 0.156 3.30 3.95
B 0.201 0.220 5.10 5.60
C 0.077 0.087 1.95 2.20
D 0.159 0.181 4.05 4.60
E 0.030 0.063 0.75 1.60
F 0.075 0.096 1.90 2.45
G 0.002 0.008 0.05 0.20
H 0.077 0.104 1.95 2.65
K 0.006 0.016 0.15 0.41
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Littelfuse:
P1301SALRP