DO NOT
SCALE FROM
THIS PRINT
.050
REF
1.27
.440 11.18
REF
.249 6.32
REF
"A"
"A"
ISDF-XX-D
FIG 1
-S: SINGLE END
(SFSD-10-28-XX-XX.XX-S SHOWN)
C
AG
+ .015[0.38] REF
(No OF POS x .050[1.27])
.080
REF
2.03
.120
REF
3.05 .145
REF
3.68
.250 6.35
REF
.050 1.27
REF
C
L
02
01
N (SEE TABLE 2)
N-1 (SEE TABLE 2)
SFSDX-XX-XXX-XX-XX.XX-XX-XXX
No OF POSITIONS
-02, -04, -05, -07, -10, -15, -20, -25,
-30 -35 -40, -45, & -50 (PER ROW)
AVAILABLE AS STANDARD
-02 THRU -50 AVAILABLE AS ASO
WIRE GAUGE (AWG)
-28, -30
END OPTION
(END OPTION COMBINATIONS NOT AVAILABLE)
-NUS: NOTCH UP, STRAIGHT
(PIN 1 TO PIN N-1)
-NDS: NOTCH DOWN, STRAIGHT
(PIN 1 TO PIN 2)
-NUX: NOTCH UP, CROSSED
(PIN 1 TO PIN N)
-NDX: NOTCH DOWN, CROSSED
(PIN 1 TO PIN 1)
-NXX OPTION (END 2)
(ONLY AVAILABLE WITH -D, -DL, -DR, -DS & -SS)
SPECIFY IN INCHES
(SINGLE END: 03.00 INCH [76.2mm]
MINIMUM,
DOUBLE END: 03.25 INCH [82.6mm]
MINIMUM)
ASSEMBLED LENGTH
-S: SINGLE END
-D: DOUBLE END
(MUST CHOOSE FROM -NXX OPTIONS)
-SL: SINGLE ENDED WITH FRICTION LOCK
(SEE SHEET 2, FIG 3)(ONLY AVAILABLE ON
*5,*7, 10 THRU 50 POSITION)
-DL: DOUBLE ENDED WITH FRICTION LOCK
(SEE SHEET 2, FIG 4) (ONLY AVAILABLE
ON *5,*7, 10 THRU 50 POSITION)
(MUST CHOOSE FROM -NXX OPTIONS)
-SR: SINGLE ENDED WITH RETENTION LATCH
(SEE SHEET 3, FIG 5)(USE SUB-IM-LTC-07-01-N)
(ONLY AVAILABLE ON -02 THRU -50 POS)
-DR: DOUBLE ENDED WITH RETENTION LATCH
(SEE SHEET 3, FIG 6)(USE SUB-IM-LTC-07-01-N)
(ONLY AVAILABLE ON -02 THRU -50 POS)
(MUST CHOOSE FROM -NXX OPTIONS)
-SS: DUAL SCREW DOWN, SINGLE ENDED CABLE
(SEE SHT 4, FIG 7)
(ONLY AVAILABLE ON 02 THRU 40 POSITIONS)
(NOT AVAILABLE WITH OPTIONS SL, DL, SR & DR
USES ISDF-XX-D-DS, CPS-RR-XX-XX-X & ACCRT-01,
MUST CHOOSE FROM NXXX OPTIONS)
-DS: DUAL SCREW DOWN, DOUBLE ENDED CABLE
(SEE SHT 4, FIG 8)
(ONLY AVAILABLE ON 02 THRU 40 POSITIONS)
(NOT AVAILABLE WITH OPTIONS SL, DL, SR & DR
USES ISDF-XX-D-DS, CPS-RR-XX-XX-X & ACCRT-01,
MUST CHOOSE FROM NXXX OPTIONS)
COLOR CODE:
LEAVE BLANK FOR ALL BLACK WIRE
C: COLOR CODED WIRE, SEE COLOR
SEQUENCE TABLE, SHEET 3
(NOT AVAILABLE WITH FEP OPTION)
(SEE NOTE 8)
ASSEMBLED LENGTH:
SECTION "A"-"A"
C
DWCX-XX-XX-300
XX.XX
.125[3.18]
ASSEMBLED LENGTH:
FIG 2
-D: DOUBLE END
(SFSD-10-28-XX-XX.XX-D-NUS SHOWN)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
C
POLARIZATION KEY
AG
C
C
C
FEP CABLE OPTION
-T: FEP (LEAVE BLANK FOR
STANDARD PVC INSULATION)
C
PLATING SPECIFICATION
-H: 30µ" HEAVY GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
-G: 10µ" LIGHT GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
-F: 3µ" FLASH GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
-GF: 3µ" FLASH SELECTIVE IN CONTACT AREA,
3µ" GOLD ON TAIL
(ONLY AVAILABLE TO EXISTING
CUSTOMERS; SEE -F PLATING)
(SEE TABLE 3, SHEET 1)
(* = NOT AVAILABLE WITH POLARIZATION KEY)
AG
AG
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [.3] 2
.XXX:
.005 [.13]
.XXXX:
.0020 [.051]
MATERIAL:
.050[1.27] SOCKET DISCRETE CABLE ASSEMBLY
BY:
SFSDX-XX-XXX-XX-XX.XX-XX-XXX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRATCHER
5/5/2005
4
1
SHEET SCALE: 2:1
F:\DWG\MISC\MKTG\SFSDX-XX-XXX-XX-XX.XX-XX-XXX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PULLOUT FORCE: 3.0 LBS [13.3 N].
3. CONTACT MUST BE INSERTED UNTIL RETENTION FEATURE LOCKS INTO PLACE.
4. ALL FINISHED GOODS ARE TO BE ELECTICAL TESTED INCLUDING HI-POT TEST
AT 1000 VOLTS DC. AFTER FINAL ELECTRICAL TEST, LABEL EACH ASSEMBLY
WITH 1 LABEL-ET.
5. TINNED COPPER WIRE IS RoHS COMPLIANT.
6. PARTS TO BE LAYER PACKAGED.
7. END OF DISCRETE WIRE MUST BE IN THE RANGE AFTER CRIMP.
8. FOR LENGTHS LESS THAN 12 in, TOLERANCE SHALL BE +/-.125.
FOR OTHER LENGTHS, TOLERANCE SHALL BE +/-2%.
9. NOTE DELETED.
10. REFER TO CRIMP SPECIFICATIONS PRINT FOR CRIMP AND STRIP
DIMENSIONS, TOLERANCES, TOOLING AND ITS REQUIREMENTS.
11. 3LB MIN WIRE CRIMP STRENGTH FOR -30 AWG AND 4.5LB MIN
WIRE CRIMP STRENGTH FOR -28 AWG.
12. NOTE DELETED.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
INSULATOR: LCP, COLOR: BLACK
CONTACT: BeCu
CABLE INSULATION: PVC OR FEP, SEE CALLOUT
WIRE: DWC: TINNED COPPER. DWCT: SILVER
PLATED COPPER
(SEE TABLE 1)
REVISION AG
NOTCH END 2
-NUS
(END 2 NOTCH UP, CABLE STRAIGHT)
(PIN 1 TO PIN N-1)
NOTCH END 1
N
N-1
0201
(SEE TABLE 2)
01
02
N-1
N
(SEE TABLE 2)
NOTCH END 2
-NDS
(END 2 NOTCH DOWN, CABLE STRAIGHT)
(PIN 1 TO PIN 2)
NOTCH END 1
01 02
N-1
N
(SEE TABLE 2)
01 02
N-1
N
(SEE TABLE 2)
NOTCH END 2
-NUX
(END 2 NOTCH UP, CABLE CROSSED)
(PIN 1 TO PIN N)
NOTCH END 1
01
02
N-1
N
(SEE TABLE 2)
01 02
N-1
N
(SEE TABLE 2)
NOTCH END 2
-NDX
(END 2 NOTCH DOWN, CABLE CROSSED)
(PIN 1 TO PIN 1)
NOTCH END 1
01 02
N-1
N
(SEE TABLE 2)
01 02
N-1
N
(SEE TABLE 2)
FIG 3
-SL: SINGLE END FRICTION LOCK
(SFSDX-10-28-XX-XX.XX-SL SHOWN)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
ISDF-XX-D-L
FIG 4
-DL: DOUBLE END FRICTION LOCK
(SFSDX-10-28-XX-XX.XX-DL-NUS SHOWN)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
ISDF-XX-D-L
SHEET OF
.050[1.27] SOCKET DISCRETE CABLE ASSEMBLY
BY:
SFSDX-XX-XXX-XX-XX.XX-XX-XXX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRATCHER
5/5/2005
4
2
SHEET SCALE: 1:0.571429
F:\DWG\MISC\MKTG\SFSDX-XX-XXX-XX-XX.XX-XX-XXX-MKT.SLDDRW
REVISION AG
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
+ .145[3.68] REF
(No OF POS x .050[1.27])
.113 2.86
.083
(TYP)
2.11
ISDF-XX-D-R
FIG 5
-SR: SINGLE END WITH RETENTION LATCH
(SFSDX-10-28-XX-XX.XX-SR SHOWN)
(ONLY AVAILABLE ON -02 THRU -50 POS)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
C
C
.080 2.03
REF
+ .145[3.68] REF (TYP)
(No OF POS x .050[1.27])
.113 2.86
.083
(TYP)
2.11
ISDF-XX-D-R
FIG 6
-DR: DOUBLE END WITH RETENTION LATCH
(SFSDX-10-28-XX-XX.XX-DR SHOWN)
(ONLY AVAILABLE ON -02 THRU -50 POS)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
C
C
.080
REF
2.03
SUB-IM-LTC-07-01-N
SHEET OF
.050[1.27] SOCKET DISCRETE CABLE ASSEMBLY
BY:
SFSDX-XX-XXX-XX-XX.XX-XX-XXX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRATCHER
5/5/2005
4
3
SHEET SCALE: 4:1
F:\DWG\MISC\MKTG\SFSDX-XX-XXX-XX-XX.XX-XX-XXX-MKT.SLDDRW
REVISION AG
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
(No OF POS X .050[1.27]) + .360 [9.14]
(No OF POS x .050[1.27])
+.015[0.38] REF
.145 3.68
'A'
ISDF-XX-D-DS
FIG 7
-SS: SINGLE END WITH SCREW DOWN
(SFSDX-10-XXX-XX-01.60-SS-NDS SHOWN)
(ONLY AVAILABLE ON -02 THRU -40 POS
MUST CHOOSE FROM -NXXX OPTIONS)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
CPS-RR-M2-01-X
C
C
.079 2.00
REF
(No OF POS x .050[1.27])
+.015[0.38] REF
(No OF POS X .050[1.27]) + .360 [9.14] (TYP)
.145 3.68
ISDF-XX-D-DS
ACCRT-01
CPS-RR-M2-01-X
C
C
.079 2.00
REF
"B" "B"
DETAIL 'A'
SCALE 4 : 1
R
.057
REF
1.45
SECTION "B"-"B"
SCALE 4 : 1
ACCRT-01
FIG 8
-DS: DOUBLE END WITH SCREW DOWN
(SFSDX-10-XXX-XX-01.60-DS-NDS SHOWN)
(ONLY AVAILABLE ON -02 THRU -40 POS
MUST CHOOSE FROM -NXXX OPTIONS)
(SAME AS FIG 1, UNLESS OTHERWISE STATED)
SHEET OF
.050[1.27] SOCKET DISCRETE CABLE ASSEMBLY
BY:
SFSDX-XX-XXX-XX-XX.XX-XX-XXX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRATCHER
5/5/2005
4
4
SHEET SCALE: 2:1
REVISION AG
F:\DWG\MISC\MKTG\SFSDX-XX-XXX-XX-XX.XX-XX-XXX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
