INDUSTRIAL MEMORY SOLUTIONS Automotive Embedded Industry Security Telecommunication Overview of services Swissbit is offering its customers: Products Customization Compliance to - Complete line of DRAM modules and NAND Flash Solid State Drives with different interfaces and form factors - Both, leading edge technology and legacy product offerings - Extended and Industrial temperature grade products - Chip-On-Board (COB) and Systemin-Package technology - Small form factor removable NAND flash cards - Memory In Package Solutions - Mobile Security Solutions, like Secure MICRO SD, SD and more - Security firmware, drivers and SDK - Custom DRAM module and - Flash designs - Security features - Individual marking - Design-in support - Security consulting - JEDEC, SDA, CFA, USB-IF, SATA-IO - RoHS, REACH, WEEE - UL - FCC, CE Sales Service and Engineering Support - Fast, effective and competent sales staff on hand to serve your needs - Our expert technical staff is available for quick response - Joint product qualification service - In-house manufacturing in Germany - Worlds only COB DRAM memory module manufacturer 2 OEM Services - Controlled Bill of Materials (BOM) - Serialization and lot code tracking - Support of long life cycles - Stringent PCN and ECN process Test for Reliability - Final extended and industrial temperature testing with KTI and Tanisys Technology equipment - World class Swissbit application testing - System Level Test During Burn-In (TDBI) Environmental Testing according to industrial and automotive standards Quality Standard - ISO 9001:2008 - TS 16949 - ISO 14001 Associations - JEDEC - CompactFlash Association (CFA) - SATA-IO - USB Implementer Forum - Secure Digital Association (SDA) - Memory Implementers Forum - Small Form Factor Special Interest Group SFF-SIG INTRODUCTION Why Choose Swissbit................. 4 Swissbit Vision and Mission......... 5 Global Presence....................... 6 Swissbit's Unique 360 Customer Service...................... 7 Swissbit Product Features........... 8 Swissbit Target Applications....... 10 NAND Flash Products Flash Procucts - SSD.................. 11 SATA SSD 2.5" X-500 / X-55 Series. 12 SATA / PATA SSD 2.5".................. 14 SLIM / mSATA & CFastTM Cards........ 16 CompactFlashTM Cards............... 18 MICRO SD Cards........................ 20 SD Memory Cards..................... 22 USB Flash Drives / Modules......... 24 SECURITY PRODUCTS Security Products..................... 26 Security MICRO SD Card.............. 28 DRAM Modules Unbuffered DIMMs................... SODIMMs............................... XRDIMMs............................... Mini / Micro DIMMs................... Module Options....................... Mini RDIMMs.......................... SORDIMMs.............................. Registered DIMMs.................... 33 33 33 33 34 35 35 35 TECHNOLOGY System-in-Package (SiP)............ 36 Part Number Decoders NAND Flash and Security Part Numbers......................... 38 DRAM Module Part Numbers....... 39 3 Why choose Swissbit Swissbit, the largest independent industrial DRAM module and Flash storage product manufacturer in Europe, was created through a management buy-out from Siemens Memory Products in 2001. With over 20 years of experience in the memory industry Swissbit has become a world class leader in technology, supplying high quality, high reliability memory storage solutions with all established DRAM and Flash interfaces. Swissbit's primary focus is on the demanding applications in the industrial markets with their high quality and reliability requirements. Therefore all Swissbit products include a broad set of additional industry specific features such as: * * * * * * * 100% Test During Burn In (TDBI) Controlled Bill of Material (BOM) SLC and Industrial MLC product series Shock and vibration resistance Long-term availability High reliability and endurance Industrial temperature support In addition Swissbit is the benchmark for low Total Cost of Ownership (TCO). Over 500 industrial customers all over the world, including 25 Fortune 500 companies rely on our products and services for their wide range of industrial applications. Swissbit products are sold in more than 50 countries through a global network of 20 distributors. 4 Why choose Swissbit High Quality products "Made in Germany" and designed with Swiss Precision result in outstanding industrial memory solutions. Swissbit develops all of its products in Switzerland with manufacturing and test facilities utilizing state-of-the-art equipment, processes and production methods which are based in Germany. The latest technology and techniques are applied to offer optimized products for all customers requirements, such as System-in-Package (SiP), Flip-Chip and SMT technology. Swissbit carefully selects premium materials and subassemblies, conducts rigorous quality inspections, and utilizes internal and external test laboratories and simulation systems. In addition Swissbit runs an extensive, ISO 9001:2008 and TS 16949 quality management process to ensure innovative memory solutions that meet even the highest demands of today and for the future. To guarantee competitive pricing, Swissbit focuses on lean company structures, efficient processes and long-term relationships with all major semiconductor manufacturers. Because applications differ, Swissbit also offers extensive customer service and will individually tailor memory solutions to meet specific requirements of system manufacturers and integrators regarding performance and cost. Vision Turning everyone we touch into fans Mission We support and further our client`s success by identifying their need to overall create an added value. We develop products and services that ensure the highest level of safety, reliability and environmental protection. We promote a corporate climate in which every employee is valued and can grow personally and professionally. We develop and drive professional relationships with our partners and stakeholders for mutual benefit. We strive for substantial, self-funded and sustained profitable growth ensuring our financial independence. Swissbit 5 Close to our Customers - Global Presence INDUSTRIAL CUSTOMER BASE Over 25 Blue-Chip customers world wide Over 500 Industrial customers globally (direct & indirect, small to large) Covering all Industrial applications GLOBAL DISTRIBUTION Arrow, Avnet, Rutronik (global players) 20 Distributors world wide (local specialists) Products sold in more than 50 countries globally GLOBAL Webshop Partners Digikey, Mouser, Element14, webg@te 24hrs (Rutronik) Swissbit Group, Switzerland (2001) Swissbit Germany, Berlin (2002) Swissbit NA, Eagle, ID (2003) Swissbit Japan, Tokyo (2004) Swissbit NA, Port Chester, NY (2003) Swissbit Security, Munich (2013) 6 Global Presence Swissbit Taiwan, Zhubei City (2013) SWISSBIT'S UNIQUE 360 CUSTOMER SERVICE Swissbit's focus is on industrial applications. Our designs and support are specialized for industrial customers and their demanding end applications. Swissbit provides the highest level of support with its unique 360 customer service. This customer centric approach enables Swissbit to develop solution-driven products for the most demanding applications. Customers are supported through intergradient pre-sales, sales and after-sales processes. When partnering with Swissbit our customers are not only supported by an ongoing process but also our expert sales staff that will recommend the best solution for their requirements, or even tailor products for specialized needs. Through close cooperation between our FAEs, inhouse development, manufacturing teams and our strategic suppliers we can achieve and guarantee long-term product availability and support. Swissbit is committed to provide the customer with the best product solutions and support for both current and future requirements. Pre-Sales After-Sales * Responsive service * Solution driven * Failure analysis (4D & 8D reports) * Reliability monitoring * Legacy support & longevity programs * PCN process * Firmware updates / upgrades 360 Customer Service * Design-in support * Joint qualification * Qualification reports * Customizations * Fast prototyping * Client specific testing * Custom labeling * Technology consulting and training * Validation support (CMTL, USB-IF, JEDEC, SDA etc.) Sales * Global Key Accounting * Worldwide Channel service * Product Life Cycle Management * Active sampling process * Market information * Worldwide logistics services * Long-term and Service contracts Customer Service 7 SWISSBIT PRODUCT FEATURES Wide Temperature Support Swissbit`s storage solutions are designed and approved to operate reliably over a wide temperature range. The products are verified at temperature corners and pre-stressed with a burn-in operating functional test (Test During Burn In - TDBI). ESD and EMI safe The product designs are in line with the latest regulations for electrostatic discharge and electromagnetic interference. Swissbit strives to exceed these limits with our own in-house technology and production capabilities, for example with System-in-Package (SiP) competence. Shock and Vibration Robustness is one of our key specification targets. The design, assembly and use of selected materials guarantee an extremely solid design which has been validated by extensive testing. Life Time Monitoring (LTM) The Swissbit Life Time Monitoring feature enables users to access the memory device's detailed Life Time Status and allows predicting imminent failure avoiding unexpected data loss. This feature uses an extended S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) interface or vendor specific commands to retrieve the Flash product information. Zone Protection The device allows the configuration of multiple zones with either no protection, write protection or access protected settings. Each zone is secured with a separate password. A Windows tool or a programming library are available. SECURE ERASE (SANITIZE/ PURGE) / FAST ERASE This feature uses an uninterruptable sequence of data erase commands. Even a power off can't stop the process which will continue upon restoration of power. The optional enhanced feature allows the customer to sanitize the data according to different standards like DoD, NSA, IREC, etc. The purge algorithm can be started by a software command or through a hardware pin. 8 SWISSBIT FEATURES Conformal Coating Swissbit offers a special protective coating on selected products. This coating is a thin polyurethane film which protects against aggressive environmental conditions such as dust, moisture or corrosive gas. TEMPERATURE SENSOR The sensor allows the host hardware or software to monitor the memory device temperature to improve data reliability in the target application environment. HEAT SPREADER Heat Spreaders for DRAM modules allow temperature hot spots to be dissipated over a larger surface area and improve the module's reliability. POWER FAIL PROTECTION & RECOVERY Intelligent Power Fail Protection & Recovery protects data from unexpected power loss. During an unintentional shutdown, firmware routines and an intelligent hardware architecture ensure that all system and user data will be stored to the NAND. Wear Leveling Sophisticated Wear Leveling & Bad Block Managementensure that Flash cells are sparingly and equally used in order to prolong life time of the device. READ-ONLY OPTIMIZED In many industrial applications the data is written to the NAND Flash once and is only read afterwards. For such cases the firmware can be optimized in order to guarantee highest possible data retention and less read disturb. TRIM SUPPORT The TRIM command allows the operating system to inform the SSD which blocks of data are no longer considered in use and can be wiped internally which increases system performance in following write accesses. With TRIM Support data scrap can be deleted in advance which otherwise would slow down future write operations to the involved blocks. LOW POWER CONSUMPTION Lower power consumption in electronic devices increases the value of the product as they save energy cost, prolong battery life time and reduce heat generation in the device and hence require less cooling. CARE MANAGEMENT LONGEVITY Various effects like data retention, read disturb limits or temperature can impact data reliability. The latest generation of Swissbit products use special methods to maintain and refresh the data for longer data reliability. The longevity product lines use special components with a long-term commitment of up to 10years. They allow for an optimized TCO model for critical applications or high qualification investments. SECURITY FEATURES TRUE HARDWARE RNG True random numbers are generated inside the secure element. True randomness is the key prerequisite for secure systems to prevent brute force attacks. Swissbit products provide secure standards, with customization options. DIGITAL SIGNATURE AND VERFICATION Digital signatures are very popular and inevitable to protect from manipulation of data and code, Swissbit Security products offer this function in a modularized and secure way to achieve higher system security. HARDWARE BASED DATA ENCRYPTION Hardware based security is key when it comes to replaceability, simple workflows and trusted runtime environments, Swissbit security products offer security in combination with reliable flash memory. MOBILE BANKING AND K H KNOW + HAVE DEVICE PROTECTION BY DUAL FACTOR AUTHENTICATION The high end of authentication is dual factor authentication, The user needs to have the card and needs to know the PIN secret. With Swissbit Security products mobile devices and systems are much more secure. SECURE VOICE Secure Voice calls are a requirement for confidential communication. Swissbit Security products are optimal for fast, secure, and user friendly secure voice solutions. ELLIPTIC CURVE CRYPTOGRAPHY SUPPORT Elliptic curves are fast and more efficient compared to RSA cryptography. Swissbit Security offer extreme security inside the microSD card by this feature. ePURSE Swissbit Security products for mobile banking and payment offer strong authentication and offline security. SWISSBIT FEATURES 9 SWISSBIT TARGET APPLICATIONS Industry Typical applications: - Industrial Computing Industrial Automation Infotainment Casino Gaming Test & Measurement - Medical Transportation Energy Surveillance Aerospace & Defense As products have to be highly reliable even in very rough working conditions such as heat, cold or strong external forces, both qualification period and the product life time is far longer than for typical consumer devices. Swissbit`s industrial memory products are the perfect fit for such demanding applications. They offer highest reliability and quality with long availability and fixed BOM. In order to guarantee such high quality standards, each product undergoes thorough functional testing before being released for shipment. AUTOMOTIVE The increasing varieties of infotainment and dashboard applications in our cars today require significantly higher storage capacities than before. All components used in Automotive need to operate in a wide temperature range and withstand sudden power losses as well as shock and vibration. Additionally very low failure rates are essential as replacements of malfunctioning parts can incur high costs. Swissbit's new S-40 SD and Micro SD Memory Card lineup caters to the demands of an automotive application, offering highest reliability and quality at competitive prices. COMMUNICATION/NETWORKING Telecommunication infrastructure is implemented globally in every possible climate zone, therefore the equipment has to operate under most severe weather conditions such as heat, cold, humidity or dust. This results in a long and expensive qualification and testing process as well as the use of products that guarantee long-term availability in order to minimize the number of re-qualifications. Swissbit's Industrial Memory Products are tested specifically for rough environmental conditions and guarantee industry leading reliability standards. Long-term relationships with our suppliers allows us to guarantee a fixed BOM along with the highest possible longevity. SECURITY Governments, Enterprises, Banks and Industry demand for high-end security. Swissbit's secure Flash memory solutions offer smart modularization of algorithms and secure storage of encryption keys in one runtime environment. Thus solution providers can fully concentrate on system design while the computation of cryptographic operations is delegated to the trusted execution environment e.g. a smart card in the flash memory device. The Swissbit Security Interface supports all relevant mobile, portable, embedded and PC platforms. 10 TARGET APPLICATIONS FLASH Products - SSD Embedded and Industrial systems require a variety of memory and storage solutions. In contrast to typical consumer devices, Swissbit`s Industrial Flash products are designed for highest reliability in extreme environmental conditions. They come with a large feature set tailored to the demand of the industrial market and with our commitment to long-term availbility. Swissbit's Industrial Solid State Drive (SSD) portfolio covers all relevant interfaces and form factors including SD and MICRO SD Memory Cards, CompactFlashTM Cards (CFC), CFastTM Cards, IDE / PATA SSDs, SATA SSDs, SLIM SATA SSDs, mSATA SSDs and USB Flash Drives (UFD). Our sophisticated Flash handling algorithms optimize performance and life time of the Single Level Cell (SLC) and Multi Level Cell (MLC) NAND Flash used in our products. Product development according to stringent design rules, critical component control, and extensive product qualification procedures ensure overall electrical and mechanical robustness of Swissbit's Flash product line. All products are offered in commercial (0C to +70C) and industrial (-40C to +85C) temperature ranges. The Flash handling features we provide include diagnostic information, built-in Error Correction, Bad Block Management, static and dynamic Wear Leveling and power fail protection. Our service team can offer product life time calculations for special use cases with specific workloads. The diagnostic features we provide enable our customers to access device state information and predict early warnings before the system stops working. SLC MLC TLC High Density Total Cost Per Bit Reliability & Durability Industrial Temperature Write Performance ECC Requirement Data Retention Longevity NAND Flash Technology COMPARISON high; medium; low FLASH Products - SSD 11 SATA SSD 2.5" Swissbit`s X-500 / 55 2.5" Industrial SATA II SSDs are designed for demanding applications. The Solid State Drives are a rugged, high performance and extremly reliable storage solution. The data rate reaches up to 240 MB/sec and an impressive 14'500 IOPS with 4 KB random accesses. The high end architecture utilizes up to 8 channels with the most reliable SLC (X-500) or EM-MLC (X-55) NAND Flash available on the market. Therefore the X-55 series provides a up to 10 times higher endurance than commercial MLC 2.5" SSDs. Special features such as ATA-8, NCQ and TRIM support enable higher IOPS (input / output per second) and sequential performance providing the best combination and reliability for industrial applications. Additionally, the S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) protocol with extended lifetime monitoring tools and software development kit enables users to have full control of mission critical data at any given time. The BCH-ECC (Error Correction Code) in combination with an intelligent power fail protection mechanism guarantee for the highest possible data reliability. The X-500 / 55 Series include various options for secure erase, purge and sanitize methods that can be triggered over software commands or through a feature connector pin. X-500 /55 Commer- SSD cial SSD Life Time Monitoring / S.M.A.R.T. Temperature Sensor ATA Security Feature Set Basic Erase DoD5220.22-M NSA (Manual 130-2) USA AirForce AFFSSI 5020 USA Army 380-19 USA Navy NAVSO P-5239-26 IREC (IRIG) 106-07 Ch. 10 NSA 9-12 X-500 FEATURE SET ENHANCED SECURE ERASE OPTIONS supported; X-500 X-55 default implemented; 12 on request; NanD Flash Products not available SW configurable; non-typical; SATA SSD 2.5" Solid State Drive Series X-500 X-55 Interface Compliance LOCKING/LATCHING SATA CONNECTOR The device is designed with a latching SATA connector. Multiple notches support the latching cables for highest vibration and shock resistance. SATA II (3 Gbit/s) - ATA8 15 + 7 pin serial ATA with latch protection / special feature connector Connector Physical Form 100,2 x 69,85 x 9,3 mm Flash Type SLC EM*-MLC Density 16 GB - 512 GB 30 GB - 480 GB Write Endurance @ 64 GB ref. ~2700 TBW** ~420 TBW** Data Retention 10 years @ life begin 5 years @ life begin Flash Shrink Interval ~ 36 months ~ 18 months Performance Sequential Read Sequential Write IOPS 4 KB Read IOPS 4 KB Write up to 240 MB/sec up to 200 MB/sec up to 14`500 up to 7`000 up to 220 MB/sec up to 160 MB/sec up to 12`000 up to 5`500 Commercial: Industrial: Operating Temperature Storage Temperature Cross Section -55C to +95C Shock MIL-STD810; 2`000 G, 0.4 ms; 50 G, 11 ms Vibration MIL-STD810; 20 G, 10-2`000 Hz random Access Time <0.2ms" MTBF 2`000`000 hours Voltage 5 V 10 % (optional 3.3 V Type) Power Consumption Special Features 0C to +70C -40C to +85C Slumber 0.7 W / IDLE 1 W / Max 3.5 W NCQ, TRIM, S.M.A.R.T., ATA Security feature set, Enhanced Secure Erase (SW / HW) Windows / Linux Application & SDK for extended S.M.A.R.T. option, Formatting and Trim Tools Part Number SFSAxxxxQvBJxss-t-dd-rrr-ccc - Power Fail Protection Advanced Wear Leveling & Block Management Enhanced Secure Erase Features available High random IOPS & Sequential Performance Ruggedized for "no-compromise" design Self Monitoring Analysis and Reporting Technology (S.M.A.R.T.) - Life Time Monitoring Application & Software Development Kit (SDK / API) - Controlled BOM & PCN process - In-field FW update * Endurance Managed; ** Tera Bytes Written, depends on application workload NanD Flash Products 13 2.5" SSD SATA & PATA/IDE Swissbit`s 2.5" Solid-State Drive (SSD) portfolio for low to medium density applications offers drop-in replacements for traditional 2.5" hard disk drives (HDD) with. These SSD are offered in both, Parallel ATA (PATA)/IDE and Serial ATA (SATA) interfaces. The P-120 and X-200 series are designed for long-term industrial usage and support key requirements such as long data retention, no compromise power fail safety and long product life cycles. Both SSD lines use the most reliable SLC Flash in combination with rugged hardware design and approved firmware technologies in order to provide the best performance in quality, reliability and data integrity. Up to medium density ranges and especially in harsh conditions, Swissbit`s SSDs P-120 and X-200 are the HDD replacement of choice. 44pin PATA/IDE cable that can be used for the P-120 Series SATA combo cable with signal and power which can be used for X-200 Series P-120 X-200 Industry Leading; 14 default implemented; NanD Flash Products on request; not available PATA SSD 2.5" SATA SSD 2.5" Solid State Drive Solid State Drive Series P-120 X-200 Interface Compliance IDE / ATA 133 SATA II - 3 Gbit/s Connector ATA 44 pin, 2 mm pitch 15 + 7 pin serial ATA Physical Form 100.2 x 69.85 x 9.0 mm 100.2 x 69.85 x 9.0 mm Flash Type SLC 4xnm SLC 4xnm / 3xnm Density 4 GB - 32 GB 4 GB - 128 GB Data Retention 10 year @ life begin 10 year @ life begin Operating Temperature Commercial: 0C to +70C Industrial: -40C to +85C Commercial: 0C to +70C Industrial: -40C to +85C Storage Temperature -50C to +100C -50C to +100C Shock 1 500 G 1 500 G Vibration 20 G 20 G Humidity 85 % RH 85C, 1 000 hrs 85 % RH 85C, 1 000 hrs Data Transfer Mode MDMA2 instead of MDMA4 up to PIO4, MDMA2, UDMA6 up to 66 MB/s up to 45 MB/s up to 35 MB/s up to 300 MB/s up to 120 MB/s up to 95 MB/s Performance Burst Rate Read Seq. Write Seq. Voltage 5 V +/-10 % 5 V +/- 10 % Power Consumption PIO typ 55 mA UDMA typ 135 mA Idle 5 mA UDMA6 typ 260 mA max 320 mA Idle 140 mA Marking Swissbit, Density, CE, Pb free, Part Swissbit, Density, CE, Pb free, Part Number, Lot Code, Mfg. Date, Master / Number, Lot Code, Mfg. Date Slave configuration Target Application Industrial Embedded Systems, Medical Solutions, Point-of-Sale, Gaming Industry, Automation Solutions, Telecommunication, Measurement, Transportation, etc. Tools Part Number Windows Freeware Application, API/DLL for extended S.M.A.R.T. option SFPAxxxxQvBOxss-t-dd-2r3-STD - ATA 133 compliant - Sophisticated Wear Leveling & Bad Block Management - S.M.A.R.T. support with extended command set - Intelligent Power Fail Protection & Recovery - Security Features available SFSAxxxxQvBRxss-t-dd-2r6-STD - Ideal Replacement for 2.5" SATA HDDs - Low Power Consumption - No Noise or Temperature Issues - High Durability - S.M.A.R.T. support - Advanced Wear Leveling & Block Management - Power Fail Protection - Security Features available NanD Flash Products 15 MSATA SSD, SLIM SATA & CFASTTM SLIM SATA SSD (MO-297) mSATA SSD (MO-300) SATA 2.5" SOLID STATE DRIVE SLIM SATA SSD MO-297 100.20 mm mSATA SSD MO-300 full size 69.85 mm 50.80 mm 54 mm CFastTM Card 39 mm 36.40 mm The X-200 Series Slim SATA & mSATA embedded SSD standard is ratified by JEDEC under specification number MO-297 & MO-300. These products are designed as a cost efficient Solid State Drive alternative to larger size SSDs in embedded applications. The Slim SATA X-200s includes the same standard 22-pin SATA connector as the 2.5" drives. This allows system designers to leverage standard SATA cabling or host connections for their application. 29.85 mm 42.80 mm Product size comparision CFastTM Card - the next CompactFlashTM Generation The CFastTM card combines two existing industry standards into a single new product: the CompactFlashTM (CF) card form factor and the Serial ATA (SATA) interface commonly used with Hard Disks. CFastTM cards can replace both HDDs and CompactFlashTM cards in applications requiring small form factors, long life endurance and the ability to withstand shock, vibration, extreme temperatures (-40C to +85C), high altitude and rough environmental conditions. Swissbit's CFastTM is designed to provide rugged storage for embedded and industrial systems. In these markets, performance, data and system reliability, system downtime, power fail robustness and flexibility are important design considerations. The CFastTM card operates with a 3.3 Volt low power source and supports three SATA power management states: Active, Partial and Slumber. This standard is a perfect choice for both, boot devices and removable applications, where low to medium storage densities (up to 64GB) are required and the physical size of conventional mechanical or solid state hard drives are impractical. Additionally, the Swissbit CFastTM card comes with full engineering and customization support and life time monitoring features, such as S.M.A.R.T. and our intelligent flash managing algorithms and Error Correction, and will continue to provide the same high level of reliability. X-200m / X-200s F-100 F-240 Industry Leading; 16 default implemented; NanD Flash Products on request; not available CFastTM Card CFastTM Card X-200s F-100 F-240 SATA II - 3 Gbit/s ATA7 CFastTM - SATA II - 3 Gbit/s ATA7 CFastTM - SATA II - 3 Gbit/s ATA8 / ATA7 compliant 52 pin PCI Express (PCIe) mini 15 + 7 pin Serial ATA CFastTM Type I CFastTM Type I Physical Form 50.8 x 29.85 x 3.3 mm (MO-300 full size) 54 x 39 x 4.00 mm (MO-297) 36.4 X 42.8 X 3.6 mm 36.4 X 42.8 X 3.6 mm Flash Type SLC SLC SLC SLC Density 2 GB - 64 GB 2 GB - 64 GB 2 GB - 32 GB 2 GB - 64 GB (lower densities on request) Data Retention 10 year @ life begin 10 year @ life begin 10 year @ life begin 10 year @ life begin Operating Temperature Commercial: 0C to +70C Industrial: -40C to +85C Commercial: 0C to +70C Industrial: -40C to +85C Commercial: 0C to +70C Industrial: -40C to +85C Commercial: 0C to +70C Industrial: -40C to +85C Storage Temperature -50C to +100C -50C to +100C -50C to +100C -50C to +100C Shock 1 500 G 1 500 G 1 500 G 1 500 G Vibration 20 G 20 G 20 G 20 G Humidity 85 % RH 85C, 1 000 hrs 85 % RH 85C, 1 000 hrs 85% RH 85C, 1 000 hrs 85 % RH 85C, 1 000 hrs Data Transfer Mode up to PIO4, MDMA2, UDMA6 up to PIO4, MDMA2, UDMA6 up to PIO4, MDMA2, UDMA6 up to PIO4, MDMA2, UDMA6 Performance Burst Rate Read Seq. Write Seq. Write Rand. 4k up to 300 MB/s up to 120 MB/s up to 95 MB/s up to 300 MB/s up to 120 MB/s up to 95 MB/s up to 300 MB/s up to 120 MB/s up to 95 MB/s up to 300 MB/s up to 130 MB/s up to 100 MB/s up to 600 IOPS Voltage 3.3 V +/- 5 % 5 V +/- 10 % 3.3 V +/- 5 % 3.3 V +/- 5 % Power Consumption typ 300 mA, max 490 mA Idle 180 mA typ 260 mA, max 320 mA Idle 140 mA typ 300 mA, max 420 mA Idle 180 mA typ 140 mA, max 250 mA Idle 55 mA, Sleep 5 mA mSATA SSD SLIM SATA SSD MO-300 full size MO-297 Series X-200m Interface Compliance SATA II - 3 Gbit/s ATA7 Connector Marking Swissbit, Density, Part Number, Lot Code, Mfg. Date Target Application Windows Freeware Application, API/DLL for extended S.M.A.R.T. optional Tools Part Number WEEE, Swissbit, Density, CE, Part Number, Lot Code,Mfg. Date, RoHS Industrial Embedded Systems, Medical Solutions, Point-of-Sale, Gaming Industry, Automation Solutions, Telecommunication, Measurement, Transportation, etc. Windows Freeware Application, API/DLL for extended S.M.A.R.T. optional Evaluation kit with 2.5" SATA adapter board available Windows / Linux Freeware Application, API/DLL for extended S.M.A.R.T. optional Evaluation kit with 2.5" SATA adapter board available Security & SBZoneProtection option SFSAxxxxUvBRxss-t-dd-2r6-STD SFSAxxxxVvBRxss-t-dd-2r6-STD SFCAxxxxHvBRxss-t-dd-2r6-STD SFCAxxxxHvBVxss-t-dd-2r6-STD - Ideal Replacement for 2.5" SATA HDDs Cost efficient SATA SSD module SATA II Interface compliant Advanced Wear Leveling & Block Management S.M.A.R.T. support Power Fail Protection - Alternative for expensive SATA SSD - Replacement for CFC by SATA Chipset - SATA II Interface compliant - Advanced Wear Leveling & Block Management - S.M.A.R.T. support - Power Fail Protection - Power modes (slumber, sleep) - Low Power removable or fix SATA SSD - High IOPS performance for 4k write (no DRAM) - Sophisticated Wear Leveling & Bad Block Management - Read Disturb Management - Intelligent Power Fail Protection & Recovery - S.M.A.R.T. support with extended command set - Trim support - SBZoneProtection option NanD Flash Products 17 COMPACTFLASHTM CARD To this day CompactFlashTM (CF) cards are still the most popular Flash-based storage solution used in the embedded and industrial markets and both form factor and connector are well established. Swissbit`s CF Cards are developed with strong focus on quality, reliability, robustness and longevity. We only select components and apply design rules fitting the stringent requirements of our industrial customers. Hardware and firmware have been tested and qualified by our experienced team and features and functionality have been proven in many challenging customer applications. Swissbit`s CF Series C-3x0 and C-4x0 come in both, commercial (0C to 70C) and industrial temperature (-40C to 85C) ranges, providing rugged and reliable memory for a wide range of demanding applications. They are designed to solve a broad range of concerns from compatibility, booting and power fail safety issues to long-term supply, controlled BOM and outstanding Flash protocol handling techniques to ensure highest possible data integrity. In contrast to commonly promoted sequential performance values, Swissbit is especially focusing on optimized random access values, being one of the key requirements in industrial applications. C-300 C-300 C-320 C-440 Longevity Power Fail Protection Power Fail Recovery SLC NAND Flash Controlled BOM / PCN Process Standard S.M.A.R.T. Support Security Erase / Security Feature Set Read Optimized High Small file write performance Read Disturb Management Trim support PC-Card mode compatibility / legacy system Feature Comparison default implemented; C-300 C-300 Longevity C-320 C-440 Industry Leading; 18 default implemented; NanD Flash Products on request; not available on request; not available; Longevity UDMA6 CF CompactFlashTM CompactFlashTM CompactFlashTM CompactFlashTM Card Card Card Card Series C-300 C-300 Longevity C-320 C-440 Interface Compliance CFA4.1 / CFA3.0 True IDE / PC card CFA4.1 / CFA3.0 True IDE / PC card CFA4.1 / CFA3.0 True IDE / PC card CFA5.0 / CFA4.1 & 3.0 compliant True IDE / PC card Connector CFC Type I CFC Type I CFC Type I CFC Type I Physical Form 36.4 x 42.8 x 3.3 mm 36.4 x 42.8 x 3.3 mm 36.4 x 42.8 x 3.3 mm 36.4 x 42.8 x 3.3 mm Flash Type SLC SLC 34nm long-term support SLC SLC Density 128 MB to 8 GB 32 MB to 8 GB 2 GB to 32 GB 2 GB to 64 GB, others on request Data Retention 10 year @ life begin 10 year @ life begin 10 year @ life begin 10 year @ life begin Commercial: 0C to +70C Operating Temperature Industrial: -40C to +85C Commercial: 0C to +70C Industrial: -40C to +85C Commercial: 0C to +70C Industrial: -40C to +85C Commercial: 0C to +70C Industrial: -40C to +85C Storage Temperature -50C to +100C -50C to +100C -50C to +100C -50C to +100C Shock 1 500 G 1 500 G 1 500 G 1 500 G Vibration 20 G 20 G 20 G 20 G Humidity 85 % RH 85C, 1 000 hrs 85 % RH 85C, 1 000 hrs 85 % RH 85C, 1 000 hrs 85 % RH 85C, 1 000 hrs Data Transfer Mode Up to UDMA4, MDMA4 & PIO6 Up to UDMA4, MDMA4 & PIO6 Up to UDMA4, MDMA4 & PIO6 Up to UDMA6, MDMA4 & PIO6 up to 66 MB/s 1ch up to 24 MB/s 2ch up to 37 MB/s 1ch up to 10 MB/s 2ch up to 20 MB/s > 100 kB/s up to 66 MB/s 1ch up to 24 MB/s 2ch up to 37 MB/s 1ch up to 10 MB/s 2ch up to 20 MB/s > 150 kB/s up to 66 MB/s up to 45 MB/s up to 133 MB/s up to 65 MB/s Voltage 3.3 V +/- 5 %, 5 V +/- 10 % 3.3 V +/- 5 %, 5 V +/- 10 % 3.3 V +/- 5 %, 5 V +/- 10 % 3.3 V +/- 5 %, 5 V +/- 10 % Power Consumption PIO typ 50 mA @ 3.3 V DMA typ 70 mA @ 3.3 V DMA typ 110 mA @ 5 V PIO typ 50 mA @ 3.3 V DMA typ 70 mA @ 3.3 V DMA typ 110 mA @ 5 V PIO typ 60 mA @ 3.3 V DMA typ 90 mA @ 3.3 V DMA typ 130 mA @ 5 V PIO typ 60 mA @ 3.3 V DMA typ 80 mA @ 3.3 V DMA typ 90 mA @ 5 V Performance Burst Rate Read Seq. Write Seq. Write Rand. 4k Marking > 90 kB/s up to 300 IOPS WEEE, Swissbit, Density, CE, Part Number, Lot Code, RoHS Industrial Embedded Systems, Medical Solutions, Point-of-Sale, Gaming Industry, Automation Solutions, Telecommunication, Measurement, Transportation, etc. Target Application Windows Freeware Application, API/DLL for extended S.M.A.R.T. option Security & SBZoneProtection option Tools Part Number up to 35 MB/s (512 MB-13 MB/s) up to 40 MB/s SFCFxxxxHxBK1ss-t-xx-5r3-SMA 1ch SFCFxxxxHxBK1ss-t-xx-5r3-SMA 1ch SFCFxxxxHxBOxss-t-dd-5r3-SMA SFCFxxxxHvBUxss-t-dd-5r7-STD SFCFxxxxHxBKxss-t-xx-5r3-SMA 2ch SFCFxxxxHxBKxss-t-xx-5r3-SMA 2ch - Sophisticated Wear Leveling & Bad Block Management S.M.A.R.T. support with extended command set Intelligent Power Fail Protection & Recovery Security Features available - Low power consumption - High IOPS performance for 4k write (no DRAM) - Sophisticated Wear Leveling & Bad Block Management - Read Disturb Management - Intelligent Power Fail Protection & Recovery - S.M.A.R.T. support with extended command set - Trim support - SBZoneProtection option NanD Flash Products 19 Flash Management Mechanism - Optimized Error Correction Code - Efficient algorithms for Bad Block Management - Real Life Time Monitoring - Sophisticated Wear Leveling & Bad Block Management - Power Fail Robustness Micro SD Swissbit`s Industrial MICRO SD Memory Cards are specifically designed, manufactured and tested to withstand extreme environmental conditions. Each of our product series is designed for a specific application with its unique requirements towards longevity, life time, endurance, temperature, data retention or cost. In addition to the fully Industrial MICRO SD Memory Cards such as the S-200u, Swissbit has developed the S-40u which targets lower endurance cost sensitive, high volume applications where data reliability over the full life-cycle up to 10 years is a critical concern. The S-40u MICRO SD cards are Swissbit's latest series of Industrial MICRO SD Memory Cards and are specifically designed, manufactured and qualified for high density, cost sensitive applications with a lower write endurance requirements. The combination of MLC (Multi Level Cell) NAND Flash with an optimized Flash controller and firmware allow for long data retention and long life cycles despite the write endurance limitations of MLC. The special firmware features in the S-40u series include powerful built-in Error Correction, read retry, background Data Care Management, randomizer, sophisticated Wear Leveling & Bad Block Managementalgorithms and power fail protection. They offer industry leading write endurance and through the implementation of the UHS-I interface, allow for data transfer rates of up to 80 MB/s. All of Swissbit`s MICRO SD cards can withstand extreme environmental conditions. They are designed to maximum mechanical stability and enhanced ESD protection. Furthermore, the hard gold SD connectors will last a minimum of 20,000 insertions. S-200u 1) S-300u 1) S-40u 1) S-450u 1) Industry Leading; 20 default implemented; NanD Flash Products 1) inherently protected by molding process; not available World`s most reliable SLC Flash fitting MICRO SD MICRO SD MICRO SD MICRO SD MICRO SD Memory Card Memory Card MEMORY CARD MEMORY CARD (SD / SDHC) (SD / SDHC) (SD / SDHC) Series S-300 S-200 S-40u S-450u Interface Compliance SDA 2.0, SDHC class 6 / 10 SDA 2.0, SDHC class 6 SDA 3.0, SDHC class 6 SDA 3.0, SDHC class 10, UHS-I Connector Physical Form MICRO SD 15.0 x 11.0 x (0.7) 1 mm Flash Type SLC 2x nm SLC 4x nm MLC 1x nm SLC 2x nm Density 2 GB - 8 GB 512 MB - 2 GB 4 GB - 16 GB 512 MB - 16 GB Data Retention 10 year @ life begin Extended: -25C to +85C Industrial: -40C to +85C Operating Temperature Storage Temperature -40C to +85C -40C to +100C Shock 1 500 G Vibration 50 G Humidity 93 % RH 40C, 500 hrs 85 % RH 85C, 1 000 hrs Data Transfer Mode SD Performance Burst Rate Read Seq. Write Seq. up to 25 MB/s up to 24 MB/s up to 22 MB/s (1/2 GB - 12 MB/s) up to 25 MB/s up to 21 MB/s up to 18 MB/s up to 25 MB/s up to 24 MB/s up to 11 MB/s 2.7 - 3.6 V Normal 2.0 - 3.6 V Basic Communication Voltage Power Consumption Read typ Write typ 50 mA 50 mA Marking Target Application Tools Part Number up to 104 MB/s up to 80 MB/s up to 75 MB/s Read typ Write typ 30 mA 40 mA Read typ Write typ 40 mA 60 mA Read typ Write typ 100 mA 100 mA Swissbit, Part Number, Lot Code, Mfg. Date Networking, Telecommunication, Enterprise Computing, Measurement, Point-of-Sale, etc. Industrial Embedded Systems, Medical Solutions, Point-of-Sale, Gaming Industry, Automation Solutions, Telecommunication, Measurement, Transportation, Automotive etc. - Life Time Monitoring with SD / SPI command set, Diagnostic SFSDxxxxNvBWxss-t-dd-1r1-STD SFSDxxxxNxBNxss-t-dd-1r1-STD - Compliant with SDA2.0 Specification - Advanced Wear Leveling & Block Management - Power Fail Protection SFSDxxxxNxBMxss-t-de-1r1-STD d=G,L,H - Compliant with SDA 2.0 / 3.0 Specification - Sophisticated Wear Leveling & Bad Block Management - Life Time Monitoring over extended command set - Intelligent Power Fail Protection & Recovery SFSDxxxxNxBMxss-t-de-1r1-STD d=M,D,Q - Compliant with SDA3.0 Specification, fast UHS transfer modes - Sophisticated Wear Leveling & Bad Block Management - Life Time Monitoring with extended command set - Intelligent Power Fail Protection & Recovery - FW update NanD Flash Products 21 Flash Management Mechanism - Optimized Error Correction Code - Efficient algorithms for Bad Block Management - Diagnostic with real Life Time Monitoring - Sophisticated Wear Leveling & Bad Block Management - Power Fail Robustness SD memory card Swissbit's Industrial SecureDigital (SD) card series are specifically designed, manufactured and tested to withstand extreme environmental conditions. The use of SLC Flash in the S-200 / 220 series combined with an optimized Flash controller provide a number of enhanced product features such as built-in error correction, sophisticated Wear Leveling & Bad Block Managementalgorithms, power fail protection and power saving modes. A high reliability housing with special connector support is used for providing resistance against bending and torque. The S-40 SD cards are Swissbit's latest series of Industrial SD Memory Cards and are specifically designed, manufactured and qualified for high density, cost sensitive applications with lower write endurance requirements. The combination of MLC (Multi Level Cell) NAND Flash with an optimized Flash controller and firmware ensure long data retention and long life-cycles despite the write endurance limitations of MLC. The special firmware features in the S-40 series include a powerful built-in Error Correction, read retry, background Data Care Management, randomizer, sophisticated Wear Leveling & Bad Block Managementalgorithms, and power loss protection. S-450 cards with SLC (Single Level Cell NAND Flash) are managed with the same sophisticated algorithms. They offer industry leading write endurance and through the implementation of the UHS-I interface, allow for data transfer rates of up to 80 MB/s. All of Swissbit`s SD cards can withstand extreme environmental conditions. They are designed to maximum mechanical stability and enhanced ESD protection. Furthermore, the hard gold SD connectors will last a minimum of 20,000 insertions. S-200/220 S-40 1) S-450 1) Industry Leading; 22 default implemented; NanD Flash Products 1) inherently protected by molding process; not available World`s most reliable SLC Flash SD Memory SD Memory SD Memory Card Card Card (SD / SDHC) (SD / SDHC) (SD / SDHC) Series S-200 / 220 S-40 S-450 Interface Compliance SDA 2.0, SDHC class 6 (10) SDA 3.0, SDHC class 6 SDA 3.0, SDHC class 10, UHS-I Connector SD Physical Form 32.0 x 24.0 x 2.1 mm Flash Type SLC MLC Density 512 MB - 8 GB 4 GB - 32 GB Data Retention SLC 512 MB - 32 GB 10 year @ life begin Extended: Industrial: Operating Temperature Storage Temperature -25C to +85C -40C to +85C -40C to +100C Shock 1 000 G Vibration 15 G 1 500 G Humidity 85 % RH 85C, 1 000 hrs 50 G 85 % RH 85C, 1 000 hrs Data Transfer Mode SD, SPI Performance Burst Rate Read Seq. Write Seq. up to 25 MB/s up to 21 MB/s up to 18 MB/s (512 MB - 13 MB/s) up to 25 MB/s up to 24 MB/s up to 11 MB/s up to 104 MB/s up to 80 MB/s up to 75 MB/s Voltage 2.7 - 3.6 V Normal 2.7 - 3.6 V Normal 2.7 - 3.6 V Normal 2.0 - 3.6 V Basic Communication 2.0 - 3.6 V Basic Communication 2.0 - 3.6 V Basic Communication Power Consumption Read typ Write typ 28 mA (max 60 mA) Read typ 55 mA (max 90 mA) Write typ Tools Part Number Read typ Write typ 100 mA 100 mA Swissbit, Density, CE, Pb free, WEEE, Part Number, Lot Code, Mfg. Date Marking Target Application 40 mA 60 mA Industrial Embedded Systems, Medical Solutions, Point-of-Sale, Gaming Industry, Automation Solutions, Telecommunication, Measurement, Transportation, Automotive etc. Life Time Monitoring with SD / SPI command set SFSDxxxxNvBWxss-t-dd-1r1-STD - Compliant with SDA 2.0 Specification - Sophisticated Wear Leveling & Bad Block Management - Life Time Monitoring over extended command set - Intelligent Power Fail Protection & Recovery SFSDxxxxLxBMxss-t-de-1r1-STD d=G,L,H - Compliant with SDA 3.0 Specification - Sophisticated Wear Leveling & Bad Block Management - Life Time Monitoring over extended command set - Intelligent Power Fail Protection & Recovery - optimized for heavy read applications SFSDxxxxLxBMxss-t-de-1r1-STD d=M,D,Q - Compliant with SDA 3.0 Specification with fast UHS transfer modes - Sophisticated Wear Leveling & Bad Block Management - Life Time Monitoring over extended command set - Intelligent Power Fail Protection & Recovery - optimized for heavy read applications NanD Flash Products 23 UNIVERSAL SERIAL BUS - USB FLASH DRIVE / MODULE The Universal Serial Bus (USB) interface is very well established and has almost entirely replaced any other forms of serial or parallel interfaces for computer peripherals and memory storage devices. Advantages of USB are its flexibility, reasonably fast sequential data transfer rate and its ability to obtain power through the connector. Almost every computer or embedded system supports devices either via the standard USB socket or internal on-board terminal headers. Swissbit offers both in different form factors and in commercial and industrial operating temperature ranges. State of the art NAND Flash handling algorithms, stringent component selection, product change control and a 100% in-process final system test at full temperature range (-40C to +85C) qualify Swissbit's USB Flash Drive (UFDs) especially for embedded and industrial markets. Swissbit's U-110 Series (USB Flash Module) offers a no compromise flash based storage solution for: * Embedded PCs that need a rugged reliable storage solution * Servers with backup or recovery functionality * General industrial computers with needs for easy to use boot mediums All Swissbit USB solutions combine security features and Life Time Monitoring tools for product life control. miniTWIST II unitedCONTRAST II USB FLASH MODULE U-110 default implemented; 24 on request; NanD Flash Products not available Series USB Flash Module USB FLASH DRIVE USB FLASH DRIVE U-110 unitedCONTRAST II miniTWIST/CAP II Interface Compliance USB 2.0 high speed (480 Mbit/s), USB 1.1 compliant Connector Standard: 2.54 mm - 10 Pin Low Profile: 2.00 mm - 10 Pin Physical Form 36.8 mm x 26.65 mm x 2.4 mm 68.0 mm x 18.0 mm x 8.0 mm 1 GB to 16 GB 512 MB to 16 GB USB 2.0 A-Plug Flash Type 55.0 mm x 16.0 mm x 7.0-8.0 mm SLC Density Data Retention Operating Temperature 128 MB to 4 GB 10 year @ life begin Commercial: 0C to +70C Industrial: -40C to +85C Storage Temperature Commercial: 0C to +70C -50C to +100C Shock 50 G Vibration 15 G Humidity 85 % RH 85C, 500 hrs Data Transfer Mode full / high speed Performance Read Seq. Write Seq. up to 32 MB/s up to 23 MB/s Voltage Power Consumption Marking Target Application 5 V +/-10 % Full Speed typ High Speed typ 90 mA 100 mA Full Speed typ High Speed typ WEEE, Swissbit, Density, CE, FCC, Part WEEE, CE, Swissbit, Density Number, Lot Code 80 mA 100 mA WEEE, CE, Swissbit Industrial Embedded Systems, Medical Solutions, Point-of-Sale, Gaming Industry, Automation Solutions, etc. Tools Part Number up to 18 MB/s up to 12 MB/s Windows - Spare block read out SFUIxxxxJvBPxss-t-dd-2r1-STD-2.54 mm SFUIxxxxKvBPxss-t-dd-2r1-STD-2.00 mm - Bootable USB Drive - Compliant with USB Specification 2.0 high speed - Support latest OS as Fixed Drive - Connector pitch variations - Robust design and shock vibration resistant SFU2xxxxEvBPxss-t-dd-1r1-STD - Approved USB host solution Hot Pluggable / Plug & Play Optimized Wear Leveling Custom marking option Security features Password manager available Removable drive SFU2xxxxDvBP1ss-t-dd-1r1-STD - Low power consumption Small form factor Optimized Wear Leveling Rotating clip or cap option Password manager available Removable drive NanD Flash Products 25 Security Products Security is becoming mandatory in diverse markets. Data breaches and compromised security scenarios are becoming a reality. Customers and solution providers are rightly concerned about risks, creating a necessity to improve security in a reliable and flexible fashion. In the telecommunications market, it has been widely publicized that GSM calls can easily be tapped. Reports about the mass interception of internet data on a global scale compromises the trust of the privacy of communications. Sophisticated attacks on industrial facilities raise questions about liability, reliability, and environmental risks as well as a threat to human life. Consumers, governments, enterprises and industry are affected by security breaches directly or indirectly, visible or invisible. Swissbit supports our customers in Industrial, Medical, Gouvernment, Telecommunications and Banking sector to deliver secure systems. Each and every system requires storage to operate. While globally recognized as a leader in high-reliable Flash memory solutions, Swissbit also designs, develops and manufactures security products that provide additional security functions and features. Swissbit demonstrates a continuous and uninterrupted migration path towards secure systems while maintaining reliability and flexibility of existing memory form factors. Swissbit offers Product Related Services: * * * * Security firmware and drivers Logo printing Optical and electronic personalization Design-in of consigned smart card chips As well as Extended Services: * * * * * 26 Security consulting Security training Customer support Design-in support Connection with eco system partner network for turn key solutions and quick time to market Security Products - PS-100u Series The security product series in the MICRO SD form factor addresses the growing demand for mobile and portable security. The products offer tangible hardware security in the same manner as the plug and play approach. For various markets the secure Micro SD series offers a broad set of security use cases. The flash memory can be used by any host to store data to the cards in high speed. Additionally security functions of the card can be activated to protect any data. Valuable data such as sensitive files, emails, photos and even voice calls can be protected by encryption, access protection or made resistant against tampering by digital signature. Depending on the use case the best fitting product can be chosen. Each and every card of the PS-100u series is equipped with a highly secure smart card chip. The block diagram below illustrates the architecture of the Swissbit Security Interface, the Flash Controller and the Encrypted Flash Chip. The Swissbit Security Interface empowers solution providers to build applications on various platforms. An SDK is available to develop applications on WindowsTM and LinuxTM PC platforms and mobile phones and tablets like AndroidTM and BlackberryTM. AES Partner and Customer solutions (like applications, services, middleware, license control) Swissbit Security Interface Flash Controller APP Secure Java Element Applet (Encrypted) Flash Memory 27 Security Products PS-100u SERIES Compliance SD 3.0 SD, ASSD V1.1 Data transfer SPI mode supported, Speed class 10 Density 4 GB / 8 GB Temperature Extended: -25C to 85C Security Infineon SLE 78 smart card chip CC EAL 5+ HW and OS Java Card 3.0.4 Global Platform 2.2.1 Smart Card OS jTop ID RSA up to 2048 bit optional ECC up to 512/521 bit AES up to 256 bit SHA2 up to 512 bit RNG AIS31, FIPS-140 Compatible Middleware: * Certgate * AET SafeSign * Charismathics * Cryptovision 80 k EEPROM for applets and secure storage Drivers / API 28 WinXP, 7, 8, Vista, Linux, BlackBerry, Android SDK available Security The Standard Edition PS-100u SE fits best into authentication and PKI (Public Key Information) use cases. The card is supported by leading middleware vendors in mobile, desktop and tablet use cases to ensure a seamless design-in into existing security infrastructures. Typical applications are: * Mobile email encryption * Digital signature * User authentication for PC and mobile login * True random number generation The Voice Edition PS-100u VE provides Elliptic Curve Cryptography. The enormous advantage of computation and security combined with small certificate sizes make the PS-100u VE card ideal for online key- and certificate exchange. Solution providers choose the PS-100u VE card to build secure mobile voice solutions. The users (caller and person called) only need to enter their PIN in their mobile device and the security chip performs end-to-end encryption on the behalf of users. All encryption keys for authentication and key agreements remain highly protected in the card at all times. Only AES key stream segments suitable for voice stream encryption are passed to the mobile host application. The PS-100u VE extends the features of the PS-100u SE. The PS-100u CL is ideal for ePurse, contactless applications and terminals. The card can be connected to an external antenna via antenna pads to communicate via the ISO 14443 contactless protocol. In this configuration all NFC smart phones can directly communicate with the security chip inside the card for wallet, payment, ePurse and banking applications. K H KNOW + HAVE PS-100u SE PS-100u VE PS-100u CL default implemented; not available; 29 DRAM Modules Swissbit commits to offering the highest quality, JEDEC standard and customized DRAM modules for industrial applications. As a DRAM module manufacturer, we use strategic multiple sources of DRAM suppliers to offer our customers a reliable, long-term supply of leading edge and legacy memory module products. Special focus is put into working with suppliers that offer extended availability of DRAM die revisions, avoiding frequent requalification efforts with our customers. Swissbit's quality focus starts with sourcing the highest quality grade DRAMs and utilizing fully compliant JEDEC module raw cards either as in-house PCB design or from top quality design partners. For all modules the passives and other active components selected are of the highest available quality grade. Using Surface Mount Technology (SMT) processes in production on fully certified facilities in Germany allows Swissbit to sustain a quality focus during the entire assembly process. Traceability is guaranteed through the complete manufacturing and testing flow. We ensure the highest quality level for our customers with world class application testing. Swissbit uses internally developed application software to test 100 % of all modules under real world conditions with diverse pattern and stress methods and to cover the complete memory array including ECC components by constantly adapting to the latest memory controller features. For industrial temperature grade modules the application tests are performed at -40C and 85C T AMBIENT. With a stringent internal product qualification, fast customer return processing and the dedication to be an always improving company, Swissbit constantly works on providing its customers the best DRAM modules available on the market at a competitive price. Swissbit is committed and able to design, manufacture and test customer-specific module solutions. We offer PCB design and layout services, development of individual test solutions, thermal simulations, DRAM component sourcing, controlled manufacturing and special coating options. By using Swissbit DRAM modules you can keep the total system cost at a minimum. 30 DRAM MODULES DRAM SPECIFIC OPTIONS DDR1 DIMM /RDIMM DDR1 SODIMM / SO-RDIMM DDR2 DIMM /RDIMM DDR2 SODIMM DDR3 DIMM DDR3 RDIMM DDR3 MiniDIMM DDR3 SODIMM / SO-UDIMM DDR3 XR-DIMM default implemented; on request; not available DDR3L, THE NEW STANDARD DDR3 so far has been the interface technology with the widest range of speed grades. Due to the architectural features like fly-by-bus, data bus and IO calibration DDR3 of today has more than twice the speed of the initial components, and extensions are still in the pipeline. Due to the technology roadmaps it was possible to signi ficantly lower the power consumption. With the latest DRAM technology it was also possible to reduce the supply voltage. While the standard DDR3 voltage is at 1.50 V, the new DDR3L components are operated at 1.35 V, reducing the memory power consumption by ~15 % under realistic conditions. DDR3L has been standardized at JEDEC and is supported by the latest memory controllers. All new Swissbit DDR3L modules are fully backwards compatible to DDR3. They can be operated both with 1.35 V and 1.50 V and be used both in the newest systems and less recent platforms, which helps to reduce inventory cost. BACKWARDS COMPATIBILITY Swissbit DDR3L-1600 modules are fully backwards compatible to: DDR3-800 CL5 DDR3L-800 CL5 DDR3-1066 CL7 DDR3L-1066 CL7 DDR3-1333 CL9 DDR3L-1333 CL9 DDR3-1600 CL11 DDR3L-1600 CL11 DRAM MODULES 31 RUGGEDIZED DIMMS Designers of rugged platforms face a difficult decision when planning their memory layout. Either they use DRAM components directly soldered to the system board, the most rugged but also expensive and inflexible solution, or they take standard SODIMMs and try to ruggedize them by using straps or glue in order to fix them in their socket. Swissbit in cooperation with the SFF-SIG consortium (Small Form Factor - Special Interest Group) has developed a rugged module called XR-DIMMTM, the abbreviation XR standing for eXtreme Rugged. Using special mezzanine connectors and mounting holes to attach the module to the system board creates a true rugged system with the easy integration and flexibility of DIMM solutions and the shock and vibration immunity of memory down implementations. The XR-DIMM closely follows the DDR3 72 bit SODIMM standard and makes design-in as easy as using a JEDEC module, unburdening the system designer of memory channel layout. With multiple module densities the system integrator can create different memory populations with one system platform, avoiding multiple system board SKUs and taking benefit in perfectly tested modules with a just in time purchase option. Memory down SODIMM with fixture XR-DIMM Design-in/ Layout Difficult Easy Easy Flexibility of memory population Difficult Easy Easy Testability after soldering Medium Easy Easy Upgrade /Repair Difficult Easy Easy Small to Medium Medium to Small Medium to Small No Yes Yes Good Medium (with glue / strap) Good Required board space Stackable solution Protection against shock Protection against Vibration MEMORY COST 32 DRAM MODULES Good Bad Good Low to Medium Low Medium UNBUFFERED DIMM PRODUCTS LONG UDIMM /WITH AND WITHOUT ECC Data Rate / CL Density Org Height Voltage Pins Partnumber Package DDR3L-UDIMM 1600 / CL11 2 GB - 8 GB x64 1.18" (29.97 mm) 1.35 / 1.50 V 240 SLUxxx64xxxxxxx-ssR BGA DDR3L-UDIMM ECC 1600 / CL11 2 GB - 8 GB x72 1.18" (29.97 mm) 1.35 / 1.50 V 240 SLUxxx72xxxxxxx-ssR BGA DDR2-UDIMM 800 / CL6 512 MB - 2 GB x64 1.18" (29.97 mm) 1.80 V 240 SEUxxx64xxxxxxx-ssR BGA DDR2-UDIMM ECC 800 / CL6 1 GB - 2 GB x72 1.18" (29.97 mm) 1.80 V 240 SEUxxx72xxxxxxx-ssR BGA DDR1-UDIMM 400 / CL3 512 MB - 1 GB x64 1.25" (31.75 mm) 2.50 V 184 SDUxxx64xxxxxxx-ssR TSOP DDR1-UDIMM ECC 400 / CL3 512 MB - 1 GB x72 1.25" (31.75 mm) 2.50 V 184 SDUxxx72xxxxxxx-ssR TSOP SODIMM /WITH AND WITHOUT ECC/RUGGED XR-DIMM Data Rate / CL Density Org Height Voltage Pins Partnumber Package DDR3L-SODIMM 1600 / CL11 1 GB - 8 GB x64 1.18" (29.97 mm) 1.35 / 1.50 V 204 SLNxxx64xxxxxxx-ssRT BGA DDR3L-SO-UDIMM 1600 / CL11 2 GB - 8 GB x72 1.18" (29.97 mm) 1.35 / 1.50 V 204 SLNxxx72xxxxxxx-ssRT BGA DDR3-SODIMM 1600 / CL11 1 GB - 8 GB x64 1.18" (29.97 mm) 1.50 V 204 SGNxxx64xxxxxxx-ssRT BGA DDR3-SO-UDIMM 1600 / CL11 1 GB - 8 GB x72 1.18" (29.97 mm) 1.50 V 204 SGNxxx72xxxxxxx-ssRT BGA DDR3-XR-DIMMTM 1600 / CL11 1 GB - 8 GB x72 38 mm x 67.5 mm 1.35 / 1.50 V 240 SLVxxx72xxxxxxx-ssRT BGA DDR2-SODIMM 800 / CL6 512 MB - 4 GB x64 1.18" (29.97 mm) 1.80 V 200 SENxxx64xxxxxxx-ssR BGA DDR1-SODIMM 400 / CL3 256 MB - 1 GB x64 1.25" (31.75 mm) 2.50 V 200 SDNxxx64xxxxxxx-ssR BGA MINI-UDIMM/MICRODIMM/ 100PIN-DIMM Data Rate / CL Density Org Height Voltage Pins Partnumber Package DDR3-MiniUDIMM 1600 / CL11 2 GB - 8 GB x72 1.18" / 0.74" 1.50 V 244 SGLxxx72xxxxxxx-ssRT BGA DDR2-MicroDIMM 667 / CL5 1 GB x64 1.18" (29.97 mm) 1.80 V 214 SEMxxx64xxxxxxx-ssR BGA DDR1-100PIN_DIMM 333 / CL2.5 128 MB - 512 MB x72 1.00" (25.40 mm) 2.50 V 100 SDUxxx32xxxxxxx-ssR TSOP DRAM MODULES 33 MODULE OPTIONS HEAT SPREADER CONFORMAL COATING The critical condition for DRAMs is a high die temperature, because it leads to loss of cell information. With die sizes continually shrinking, the power dissipation is concentrated on only a few square millimeters. Adding a heat spreader to a module allows the hot spots to easier dissipate the temperature over a bigger surface. This heat spreader levels out the module heat dissipation, thus reducing the hot spot temperature and improving the module reliability. Swissbit offers heat spreader solutions for some of its industrial temperature grade SODIMMs and MiniDIMMs. Industrial DRAM modules often do not operate in a clean air environment as compared to standard office or home conditions. A heavy-industry environment with hot or humid air, aggressive chloride of sulfite loaded gas or dust can reduce the life span of a DRAM module by corroding the PCB lines or solder contacts. Swissbit offers a full module surface coating with a thin film of polyurethane which effectively protects against most hazardous environmental conditions. With this protection the endurance of the module is heavily improved, thus reducing maintenance periods and avoiding sudden breakdown of a system. This option is currently available for SODIMMs as well as for several Flash products. TEMPERATURE SENSOR For all DDR3 SODIMMs, MiniDIMMs and registered DIMMs, Swissbit offers as a standard an integrated temperature sensor within the SPD device. It allows permanent monitoring of the module temperature over the system management bus. By utilizing this feature the system management can actually control the self heating of the module in a more accurate manner than by using calculation methods for memory throttling. This results in higher useable bandwidth and avoids overheating of the module. CORROSION RESISTANCE Industrial Temperature Range For demanding applications Swissbit uses a thick layer of 30 micro inch gold on the DIMM contacts and special sulfur corrosion resistant passives to offer highest reliability and longest lifetime. Besides modules for commercial temperature range 0C to 70C, Swissbit also offers products for an extended temperature range of 0C to 85C T AMBIENT as well as full industrial temperature range -40C to 85C T AMBIENT. With intensive application testing of each individual module at low and high temperature, Swissbit ensures the highest quality and reliability of their products. 34 DRAM MODULES Registered DIMM products Long RDIMM / standard height / with ECC and C/A Parity DDR3-RDIMM ECC+Parity DDR2-RDIMM ECC+Parity Data Rate / CL Density Org Height Voltage Pins Partnumber Package 1333 / CL9 1 GB - 8 GB x72 1.18" (29.97 mm) 1.50 V 240 SGPxxx72xxxxxx-ssR BGA 800 / CL6 1 GB - 4 GB x72 1.18" (29.97 mm) 1.80 V 240 SEPxxx72xxxxxxx-ssR BGA Low Profile Long RDIMM, UDIMM / with ECC DDR3-RDIMM ECC+Parity DDR3-UDIMM ECC DDR2-RDIMM ECC+Parity Data Rate / CL Density Org Height Voltage Pins Partnumber Package 1333 / CL9 2 GB - 4 GB x72 0.70" (17.78 mm) 1.50 V 240 SGPxxx72xxxxxxx-ssR BGA 1333 / CL9 2 GB - 4 GB x72 0.70" (17.78 mm) 1.50 V 240 SGUxxx72xxxxxxx-ssR BGA 800 / CL6 1 GB - 2 GB x72 0.72" (18.29 mm) 1.80 V 240 SEPxxx72xxxxxxx-ssR BGA VLP MiniRDIMM with ECC, Registered SO-RDIMM with ECC Data Rate / CL Density Org Height Voltage Pins Partnumber Package DDR3-MiniRDIMM 1333 / CL9 2 GB - 4 GB x72 0.72" (18.29 mm) 1.50 V 244 SGHxxx72xxxxxxx-ssR BGA DDR2-MiniRDIMM 667 / CL5 1 GB x72 0.72" (18.29 mm) 1.80 V 244 SEHxxx72xxxxxxx-ssR BGA DDR2-SO-RDIMM 667 / CL5 1 GB - 2 GB x72 1.18" (29.97 mm) 1.80 V 200 SEGxxx72xxxxxxx-ssR BGA DRAM MODULES 35 SYSTEM-IN-PACKAGE (SiP) System-in-Package (SiP) is the processing of sensitive bare dies or chips into robust finished modules or components. With 20 years of experience, Swissbit successfully uses advanced packaging technologies in order to achieve smallest form factors and to built Multi-Chip-Packages. With this electronic integration approach our products provide more functionality or highest memory densities inside one package, various functional blocks (RF, digital, sensors, security and memory) are combined, as well as passive components. Beginning with the wafer and bare die handling, Swissbit utilizes a flexible chip on board (COB) assembly and packaging line. Processes like SMT assembly, die bonding, Au and Al wire bonding, dam&fill, transfer molding, precise separation with laser technology and sawing, housing, labeling, laser marking etc. are very well established. Die stacking, especially for Flash and DRAM, is one of our expertise besides the integration of additional hardware features and an experienced team of testing and quality engineers. Our own Memory-In-Package line qualifies (but not limits) Swissbit as the development and production partner for any dedicated or customized memory-related product with challenging integration or reliability requirements. If you cannot achieve the special demands regarding space and performance using traditional components and processes, Swissbit offers feasibility studies, manages or supports your development project and produces prototypes and small and mid-size volumes (up to 50'000 pieces / month). We will aid you from the time of inception of your project: from the design phase, prototyping, determining the circuit layout and material selection, to preparing the appropriate packaging for transport. Swissbit produces and develops according to ISO 9001:2008, TS 16949 and ISO 14001 approved processes and is an experienced partner of global industrial and automotive accounts. Swissbits technology portfolio combined with its strong engineering knowhow and experience enables new innovative MCP (Multi Chip Packages) / SiP / COB configurations, like stacked dice, side-by-side, sensors integration etc. System in Package solutions could be smaller, cheaper and having higher security. System-in-Package benefits: * Reduces process complexity * Lower TCO (total cost of ownership) * Reduces System Board Space due to smaller sized solutions than individually packaged ICs * Layer count reduction in System PCB * Reduces board mounted height * Mixed analog / digital design * Reduces system board test complexity 36 SWISSBIT SiP and COB COMPETENCY CONCEPTION * * * * * * Product definition Feasibility studies Verification plan Qualification plan Design for test Design for Production * Design to Cost VERIFICATION & DEVELOPMENT * Package development * Process development * Substrate layout * Test engineering and development * Failure analysis consulting Production Qualification * * * * * * Product verification Debugging Optimization Reliability testing Life time Compliance to CE / FCC / VCCI, UL, RoHS, REACH * * * * Fast prototyping Ramp up Yield management Series production of: *SMT * SiP *COB *MCP *BGA Logistics * Stock management * Supply chain management * One stop sourcing Swissbit is offering the following production technologies SMD SEPARATION / SINGULATION Die Attach/Chip Bonding/ Wire Bonding DIE STACKING ENCAPSULATION ADHESIVE APPLY MARKING Conformal Coating System in Package (SiP) 37 Swissbit Part Number - The DNA of your specific product Flash and Security Part Number Decoder S 1 F 2 CF 3 2048 4 H 5 4 6 B 7 o 8 2 9 TO - I - M 10 11 12 S 13 - * 14 - * 15 Swissbit Memory (1) Design Option (15) Memory Type (2) F: Flash Products Configuration (14) PIN Mode (13) 0: 1 nCE & R/nB Product Type (3) 1: 2 nCE & R/nB U2: USB 2.0 Flash Drive 2: 4 nCE & R/nB CA: CFastTM A: LGA 1 nCE & R/nB CF: CompactFlashTM B: LGA 2 nCE & R/nB UI: UFD internal / Module C: LGA 4 nCE & R/nB SD: SD Memory Card S: TSOP 1 nCE & R/nB MM: Multimedia Card T: TSOP 2 nCE & R/nB PA: PATA / IDE U: TSOP 4 nCE & R/nB SA: SATA E: COB 1 nCE F: COB 2 nCE Density (4) 0016: 16 MB 4096: 4 GB Flash Package Classification (12) 0032: 32 MB 8192: 8 GB M: SLC SDP (single die package) 0064: 64 MB 016G: 16 GB D: SLC DDP (dual die package) 0128: 128 MB 032G: 32 GB Q: SLC QDP (quad die package) 0256: 256 MB 064G: 64 GB N: SLC ODP (octal die package) 0512: 512 MB 128G: 128 GB G: MLC SDP (single die package) 1024: 1 GB 256G: 256 GB L: MLC DDP (dual die package) 2048: 2 GB 512G: 512 GB H: MLC QDP (quad die package) Product Dimension (5) H: CompactFlashTM / CFastTM O: MLC ODP (octal die package) Temperature Rating (11) J: UFD Module 2.54 mm terminal header I: Industrial Temp. (-40C to +85C) K: UFD Module 2.00 mm terminal header E: Extended Temp. (-25C to +85 / 90C) L: SD Memory Card C: Commercial Temp. (0C to +70C) N: MICRO SD Memory Card O: Multimedia Card Flash Supplier (10) Q: SSD 2.5" SA: Samsung U: mSATA (MO-300) MT: Micron Technology V: SLIM SATA (MO-297) HY: SK Hynix Product Generation (6) Memory Organization (7) Technology (8) 38 Part Numbers TO: Toshiba Chips / Channels (9) DRAM Part Number Decoder S 1 l N 08G 64 E2 B d 2 2 3 4 5 6 7 8 9 SA - DC 10 11 * 12 R T 13 14 Swissbit Memory (1) Product Group (2) S: SDRAM SDR 3.30 V D: SDRAM DDR 2.50 V E: SDRAM DDR2 1.80 V G: SDRAM DDR3 1.50 V L: SDRAM DDR3L 1.35 / 1.50 V Thermal Sensor (14) Material (13) R: RoHS conform S: RoHS conform, Sulfur resistant Temperature Rating (12) Module Type (3) C: (or blank) (0C to +70C) SDR E: Ext. Temp. (0C to +85C) DDR N: 144 Pin SODIMM I: U: 184 Pin UDIMM Ext. Temp. (-25C to +85C) W: Ind. Temp. (-40C to +85C) R: 184 Pin RDIMM Speed (11) N: 200 Pin SODIMM M: 172 Pin Micro-DIMM DDR3 AA: DDR3-800 CL5 DDR2 U: 240 Pin UDIMM R: 240 Pin RDIMM, w/o Parity P: 240 Pin RDIMM, w/ Parity CC: DDR3-1333 CL9 BB: DDR3-1066 CL7 DC: DDR3-1600 CL11 DDR2 50: DDR2-400 CL3 37: DDR2-533 CL4 30: DDR2-667 CL5 3A: DDR2-667 CL4 25: DDR2-800 CL6 2A: DDR2-800 CL5 F: 240 Pin FBDIMM N: 200 Pin SODIMM BB: DDR2-1066 CL7 G: 200 Pin SO-RDIMM 08: DDR-200 CL2 75: DDR-266B CL2.5 70: DDR-266A CL2 7A: DDR-266A CL2 DDR3 U: 240 Pin UDIMM 60: DDR-333B CL2.5 6A: DDR-333A CL2 DDR3L P: 240 Pin RDIMM 50: DDR-400B CL3 5A: DDR-400A CL2.5 10: PC-100 CL3 08: PC-100 CL2 75: PC-133 CL3 70: PC-133 CL2 H: 244 Pin MiniRDIMM, w/ Parity DDR M: 214 Pin MicroDIMM N: 204 Pin SODIMM / SOUDIMM G: 204 Pin SO-RDIMM M: 214 Pin MicroDIMM SDR L: 244 Pin MiniUDIMM DRAM Manufacturer (10 ) H: 244 Pin MiniRDIMM MT: Micron Technology V: 240 Pin XR-DIMM EP: Elpida QI: Qimonda Address Depth / Capacity (4) 008: 8 MB x (5) 01G: 1 GB 016: 16 MB x (5) 02G: 2 GB 032: 32 MB x (5) 04G: 4 GB 064: 64 MB x (5) 08G: 8 GB SA: Samsung HY: SK Hynix WI: Winbond Module Ranks (9) 128: 128 MB x (5) 1: 1 Rank Module 256: 256 MB x (5) 2: 2 Rank Module Data Width (5) DRAM Revision (8) 32: w/o Parity 36: w/ Parity 64: w/o ECC 72: w/ ECC Printed Circuit Board with Revision (6) DRAM Organization (7) A: x4 E: x8 TSOP Stack D: x4 TSOP Stack C: x16 B: x8 G: x4 BGA Stack Part Numbers 39 EMEA / APAC Americas Swissbit AG Industriestrasse 4 CH-9552 Bronschhofen Switzerland Swissbit NA Inc. 1117 E Plaza Drive Unit E Suite 105 / 205 Eagle, Idaho 83616 USA Swissbit NA Inc. 18 Willett Avenue, Suite 202 Port Chester, New York 10573 USA Tel. +41 71 913 03 03 Fax +41 71 913 03 15 industrial@swissbit.com Tel. +1 208 938 4525 Fax +1 914 935 9865 sales@swissbitna.com Tel. +1 914 935 1400 Fax +1 914 935 9865 sales@swissbitna.com Japan Greater China Swissbit Security Swissbit Japan Co., Ltd. 3F, 2-1-24 Koenji-Kita, Suginami-ku, Tokyo 166-0002 Japan Swissbit Asia 2F, No. 125, Shengli 2nd Rd, Zhubel City, Hsinchu County 302 Taiwan (R.O.C.) Swissbit Germany AG Innere Wiener Str. 60 DE-81667 Munich Germany Tel. +81 3 5356 3511 Fax +81 3 5356 3512 industrial@swissbit.co.jp Tel. +886 3 550 8166 Fax +886 3 550 8126 salesasia@swissbit.com Tel. +49 89 12 22 32 531 Fax + 49 89 12 22 32 549 security@swissbit.com HEADQUARTERS Swissbit AG Industriestrasse 4 CH-9552 Bronschhofen Switzerland Tel. +41 71 913 03 03 Fax +41 71 913 03 15 info@swissbit.com 40 www.swissbit.com Version 3.0 Swissbit Sales locations worldwide Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Swissbit: SLN08G64B3BB2SA-DCRT SLN02G72F1BK1MT-DCRT