INDUSTRIAL MEMORY SOLUTIONS
AUTOMOTIvE  EMbEDDED  INDUSTRY  SEcURITY  TELEcOMMUNIcATION
2
PRODUCTS
- Complete line of DRAM modules and
NAND Flash Solid State Drives with
dierent interfaces and form factors
- Both, leading edge technology and
legacy product offerings
- Extended and Industrial temperature
grade products
- Chip-On-Board (COB) and System-
in-Package technology
- Small form factor removable NAND
flash cards
- Memory In Package Solutions
- Mobile Security Solutions, like
Secure MICRO SD, SD and more
- Security firmware, drivers and SDK
SALES SERVICE AND
ENGINEERING SUPPORT
- Fast, eective and competent sales
sta on hand to serve your needs
- Our expert technical sta is avail-
able for quick response
- Joint product qualification service
- In-house manufacturing in Germany
- Worlds only COB DRAM memory
module manufacturer
CUSTOMIZATION
- Custom DRAM module and
- Flash designs
- Security features
- Individual marking
- Design-in support
- Security consulting
OEM SERVICES
- Controlled Bill of Materials (BOM)
- Serialization and lot code tracking
- Support of long life cycles
- Stringent PCN and ECN process
TEST FOR RELIABILITY
- Final extended and industrial
temperature testing with KTI and
Tanisys Technology equipment
- World class Swissbit application testing
- System Level Test During Burn-In (TDBI)
Environmental Testing according to
industrial and automotive standards
COMPLIANCE TO
- JEDEC, SDA, CFA, USB-IF, SATA-IO
- RoHS, REACH, WEEE
- UL
- FCC, CE
QUALITY STANDARD
- ISO 9001:2008
- TS 16949
- ISO 14001
ASSOCIATIONS
- JEDEC
- CompactFlash Association (CFA)
- SATA-IO
- USB Implementer Forum
- Secure Digital Association (SDA)
- Memory Implementers Forum
- Small Form Factor Special Interest
Group SFF-SIG
Overview of services Swissbit is offering its customers:
3
Flash Procucts - SSD ................. 11
SATA SSD 2.5” X-500 / X-55 Series 12
SATA / PATA SSD 2.5” ................. 14
SLIM / mSATA & CFast™ Cards ....... 16
CompactFlash™ Cards .............. 18
MICRO SD Cards ....................... 20
SD Memory Cards .................... 22
USB Flash Drives / Modules ........ 24
NAND FLASH PRODUCTS
DRAM MODULES
PART NUMBER DECODERS
TECHNOLOGY
System-in-Package (SiP) ........... 36
Unbuffered DIMMs .................. 33
SODIMMs............................... 33
XRDIMMs .............................. 33
Mini / Micro DIMMs .................. 33
Module Options ...................... 34
Mini RDIMMs ......................... 35
SORDIMMs ............................. 35
Registered DIMMs ................... 35
NAND Flash and Security
Part Numbers ........................ 38
DRAM Module Part Numbers ...... 39
Why Choose Swissbit ................ 4
Swissbit Vision and Mission ........ 5
Global Presence ...................... 6
Swissbit’s Unique 360°
Customer Service ..................... 7
Swissbit Product Features .......... 8
Swissbit Target Applications ...... 10
INTRODUCTION
SECURITY PRODUCTS
Security Products .................... 26
Security MICRO SD Card ............. 28
4
WHY CHOOSE SWISSBIT
Swissbit, the largest independent
industrial DRAM module and Flash
storage product manufacturer in Europe,
was created through a man agement
buy-out from Siemens Memory
Products in 2001. With over 20 years
of experience in the memory industry
Swissbit has become a world class
leader in technology, supplying high
quality, high reliability memory
storage solutions with all established
DRAM and Flash interfaces. Swissbit’s
primary focus is on the demanding
applications in the industrial markets
with their high quality and reliability
requirements.
Therefore all Swissbit products include
a broad set of additional industry
specific features such as:
• 100% Test During Burn In (TDBI)
• Controlled Bill of Material (BOM)
• SLC and Industrial MLC product series
• Shock and vibration resistance
• Long-term availability
• High reliability and endurance
• Industrial temperature support
In addition Swissbit is the benchmark
for low Total Cost of Ownership (TCO).
Over 500 industrial customers all
over the world, including 25 Fortune
500 companies rely on our products
and services for their wide range
of industrial applications. Swissbit
products are sold in more than 50
countries through a global network
of 20 distributors.
High Quality products “Made in
Germany” and designed with Swiss
Precision result in outstanding industrial
memory solutions. Swissbit develops
all of its products in Switzerland with
manufacturing and test facilities
utilizing state-of-the-art equipment,
processes and production methods
which are based in Germany. The
latest technology and techniques are
applied to offer optimized products
for all customers requirements, such
as System-in-Package (SiP), Flip-Chip
and SMT technology.
Swissbit carefully selects premium
materials and subassemblies, conducts
rigorous quality inspections, and
utilizes internal and external test
laboratories and simulation systems.
In addition Swissbit runs an extensive,
ISO 9001:2008 and TS 16949 quality
management process to ensure
innovative memory solutions that
meet even the highest demands of
today and for the future. To guarantee
competitive pricing, Swissbit focuses
on lean company structures, efficient
processes and long-term relation-
ships with all major semiconductor
manufacturers.
Because applications differ, Swissbit
also oers extensive customer service
and will individually tailor memory
solutions to meet specific requirements
of system manufacturers and
integrators regarding performance
and cost.
WHY CHOOSE SWISSBIT
5
SWISSBIT
We support and further our client‘s success by identifying their need to
overall create an added value.
We develop products and services that ensure the highest level of safety,
reliability and environmental protection.
We promote a corporate climate in which every employee is valued and
can grow personally and professionally.
We develop and drive professional relationships with our partners and
stakeholders for mutual benefit.
We strive for substantial, self-funded and sustained profitable growth
ensuring our financial independence.
VISION
MISSION
Turning everyone we touch into fans
6
CLOSE TO OUR CUSTOMERS – GLOBAL PRESENCE
INDUSTRIAL CUSTOMER BASE
Over 25 Blue-Chip customers world wide
Over 500 Industrial customers globally (direct & indirect, small to large)
Covering all Industrial applications
GLOBAL DISTRIBUTION
Arrow, Avnet, Rutronik (global players)
20 Distributors world wide (local specialists)
Products sold in more than 50 countries globally
GLOBAL WEBSHOP PARTNERS
Digikey, Mouser, Element14, webg@te 24hrs (Rutronik)
Swissbit NA,
Port Chester, NY (2003)
GLOBAL PRESENCE
Swissbit NA,
Eagle, ID (2003)
Swissbit Group,
Switzerland (2001)
Swissbit Japan,
Tokyo (2004)
Swissbit Germany,
Berlin (2002)
Swissbit Security,
Munich (2013)
Swissbit Taiwan,
Zhubei City (2013)
7
SWISSBIT’S UNIQUE 360° CUSTOMER SERVICE
Swissbit’s focus is on industrial applications. Our designs
and support are specialized for industrial customers and
their demanding end applications. Swissbit provides the
highest level of support with its unique 360° customer
service. This customer centric approach enables Swissbit
to develop solution-driven products for the most
demanding applications. Customers are supported
through intergradient pre-sales, sales and after-sales
processes. When partnering with Swissbit our customers
are not only supported by an ongoing process but also our
expert sales staff that will recommend the best solution
for their requirements, or even tailor products for specialized
needs. Through close cooperation between our FAEs, in-
house development, manufacturing teams and our strategic
suppliers we can achieve and guarantee long-term
product availability and support. Swissbit is committed to
provide the customer with the best product solutions
and support for both current and future requirements.
AFTER-SALES
• Responsive service
• Solution driven
• Failure analysis
(4D & 8D reports)
• Reliability monitoring
• Legacy support &
longevity programs
• PCN process
• Firmware updates / upgrades
PRE-SALES
• Design-in support
• Joint qualification
• Qualification reports
• Customizations
• Fast prototyping
• Client specific testing
• Custom labeling
• Technology consulting and training
• Validation support
(CMTL, USB-IF, JEDEC, SDA etc.)
SALES
• Global Key Accounting
• Worldwide Channel service
• Product Life Cycle
Management
• Active sampling process
• Market information
• Worldwide logistics services
• Long-term and
Service contracts
360°
Customer
Service
CUSTOMER SERVICE
Swissbit Japan,
Tokyo (2004)
8
WIDE TEMPERATURE SUPPORT
Swissbit‘s storage solutions are designed and
approved to operate reliably over a wide
temperature range. The products are verified
at temperature corners and pre-stressed with
a burn-in operating functional test
(Test During Burn In – TDBI).
ESD AND EMI SAFE
The product designs are in line with the latest
regulations for electrostatic discharge and electro-
magnetic interference. Swissbit strives to exceed
these limits with our own in-house technology
and production capabilities, for example with
System-in-Package (SiP) competence.
SHOCK AND VIBRATION
Robustness is one of our key specification
targets. The design, assembly and use of
selected materials guarantee an extremely
solid design which has been validated by
extensive testing.
LIFE TIME MONITORING (LTM)
The Swissbit Life Time Monitoring feature
enables users to access the memory device’s
detailed Life Time Status and allows predicting
imminent failure avoiding unexpected data
loss. This feature uses an extended S.M.A.R.T.
(Self-Monitoring, Analysis and Reporting
Technology) interface or vendor specific
commands to retrieve the Flash product
information.
ZONE PROTECTION
The device allows the configuration of multiple
zones with either no protection, write protec-
tion or access protected settings. Each zone is
secured with a separate password. A Windows
tool or a programming library are available.
SECURE ERASE (SANITIZE / PURGE) /
FAST ERASE
This feature uses an uninterruptable sequence of
data erase commands. Even a power o can’t
stop the process which will continue upon
restoration of power. The optional enhanced
feature allows the customer to sanitize the data
according to dierent standards like DoD, NSA,
IREC, etc. The purge algorithm can be started by a
software command or through a hardware pin.
CONFORMAL COATING
Swissbit offers a special protective coating on
selected products. This coating is a thin
polyurethane film which protects against
aggressive environmental conditions such as
dust, moisture or corrosive gas.
TEMPERATURE SENSOR
The sensor allows the host hardware or software
to monitor the memory device temperature to
improve data reliability in the target applica-
tion environment.
HEAT SPREADER
Heat Spreaders for DRAM modules allow
temperature hot spots to be dissipated over
a larger surface area and improve the
module’s reliability.
POWER FAIL PROTECTION & RECOVERY
Intelligent Power Fail Protection & Recovery
protects data from unexpected power loss.
During an unintentional shutdown, firmware
routines and an intelligent hardware architec-
ture ensure that all system and user data will
be stored to the NAND.
WEAR LEVELING
Sophisticated Wear Leveling & Bad Block
Managementensure that Flash cells are sparin-
gly and equally used in order to prolong life
time of the device.
READ-ONLY OPTIMIZED
In many industrial applications the data is written
to the NAND Flash once and is only read afterwards.
For such cases the firmware can be optimized in
order to guarantee highest possible data retention
and less read disturb.
TRIM SUPPORT
The TRIM command allows the operating
system to inform the SSD which blocks of data
are no longer considered in use and can be
wiped internally which increases system
performance in following write accesses.
With TRIM Support data scrap can be deleted in
advance which otherwise would slow down
future write operations to the involved blocks.
LOW POWER CONSUMPTION
Lower power consumption in electronic devices
increases the value of the product as they save
energy cost, prolong battery life time and
reduce heat generation in the device and hence
require less cooling.
SWISSBIT PRODUCT FEATURES
SWISSBIT FEATURES
9
CARE MANAGEMENT
Various eects like data retention, read disturb
limits or temperature can impact data reliabi-
lity. The latest generation of Swissbit products
use special methods to maintain and refresh the
data for longer data reliability.
The high end of authentication is dual factor
authentication, The user needs to have the
card and needs to know the PIN secret. With
Swissbit Security products mobile devices and
systems are much more secure.
Secure Voice calls are a requirement for confi-
dential communication. Swissbit Security
products are optimal for fast, secure, and user
friendly secure voice solutions.
Elliptic curves are fast and more ecient com-
pared to RSA cryptography. Swissbit Security
oer extreme security inside the microSD card
by this feature.
KNOW + HAVE
K H
SECURITY FEATURES
SWISSBIT FEATURES
LONGEVITY
The longevity product lines use special compo-
nents with a long-term commitment of up to
10years. They allow for an optimized TCO model
for critical applications or high qualification
investments.
True random numbers are generated inside the
secure element. True randomness is the key
prerequisite for secure systems to prevent brute
force attacks. Swissbit products provide secure
standards, with customization options.
Digital signatures are very popular and inevit-
able to protect from manipulation of data and
code, Swissbit Security products offer this
function in a modularized and secure way to
achieve higher system security.
Hardware based security is key when it comes
to replaceability, simple workflows and trusted
runtime environments, Swissbit security
products offer security in combination with
reliable flash memory.
Swissbit Security products for mobile banking
and payment offer strong authentication and
offline security.
TRUE HARDWARE RNG
DIGITAL SIGNATURE AND
VERFICATION
HARDWARE BASED DATA
ENCRYPTION
MOBILE BANKING AND EPURSE
DEVICE PROTECTION BY DUAL
FACTOR AUTHENTICATION
SECURE VOICE
ELLIPTIC CURVE CRYPTOGRAPHY
SUPPORT
10
SWISSBIT TARGET APPLICATIONS
TARGET APPLICATIONS
The increasing varieties of infotainment and dashboard applications in our cars
today require significantly higher storage capacities than before. All components
used in Automotive need to operate in a wide temperature range and withstand
sudden power losses as well as shock and vibration. Additionally very low failure
rates are essential as replacements of malfunctioning parts can incur high costs.
Swissbit’s new S-40 SD and Micro SD Memory Card lineup caters to the demands of
an automotive application, oering highest reliability and quality at competitive prices.
Telecommunication infrastructure is implemented globally in every possible climate
zone, therefore the equipment has to operate under most severe weather conditions
such as heat, cold, humidity or dust. This results in a long and expensive qualification
and testing process as well as the use of products that guarantee long-term avail-
ability in order to minimize the number of re-qualifications.
Swissbit’s Industrial Memory Products are tested specifically for rough environmental
conditions and guarantee industry leading reliability standards. Long-term relation-
ships with our suppliers allows us to guarantee a fixed BOM along with the highest
possible longevity.
Governments, Enterprises, Banks and Industry demand for high-end security.
Swissbit’s secure Flash memory solutions oer smart modularization of algorithms
and secure storage of encryption keys in one runtime environment. Thus solution
providers can fully concentrate on system design while the computation of crypto-
graphic operations is delegated to the trusted execution environment e.g. a smart
card in the flash memory device. The Swissbit Security Interface supports all relevant
mobile, portable, embedded and PC platforms.
As products have to be highly reliable even in very rough
working conditions such as heat, cold or strong external
forces, both qualification period and the product life time
is far longer than for typical consumer devices.
Swissbit‘s industrial memory products are the perfect fit for
such demanding applications. They oer highest reliability
and quality with long availability and fixed BOM. In order
to guarantee such high quality standards, each product
undergoes thorough functional testing before being re-
leased for shipment.
Typical applications:
- Industrial Computing
- Industrial Automation
- Infotainment
- Casino Gaming
- Test & Measurement
- Medical
- Transportation
- Energy
- Surveillance
- Aerospace & Defense
AUTOMOTIVE
COMMUNICATION / NETWORKING
INDUSTRY
SECURITY
11
Embedded and Industrial systems
require a variety of memory and
storage solutions. In contrast to typical
consumer devices, Swissbit‘s Industrial
Flash products are designed for highest
reliability in extreme environmental
conditions. They come with a large
feature set tailored to the demand of
the industrial market and with our
commitment to long-term availbility.
Swissbit’s Industrial Solid State Drive
(SSD) portfolio covers all relevant
interfaces and form factors including
SD and MICRO SD Memory Cards,
CompactFlashTM Cards (CFC), CFastTM
Cards, IDE / PATA SSDs, SATA SSDs, SLIM
SATA SSDs, mSATA SSDs and USB Flash
Drives (UFD).
Our sophisticated Flash handling
algorithms optimize performance and
life time of the Single Level Cell (SLC)
and Multi Level Cell (MLC) NAND Flash
used in our products.
FLASH PRODUCTS - SSD
NAND FLASH TECHNOLOGY
COMPARISON
SLC MLC TLC
High Density
Total Cost Per Bit
Reliability & Durability
Industrial Temperature
Write Performance
ECC Requirement
Data Retention
Longevity
high; medium; low
Product development according to
stringent design rules, critical
component control, and extensive
product qualification procedures ensure
overall electrical and mechanical
robustness of Swissbit’s Flash product
line. All products are oered in
commercial (0°C to +70°C) and industrial
(-40°C to +85°C) temperature ranges.
The Flash handling features we provide
include diagnostic information, built-in
Error Correction, Bad Block Management,
static and dynamic Wear Leveling and
power fail protection. Our service team
can oer product life time calculati-
ons for special use cases with specific
workloads. The diagnostic features we
provide enable our customers to
access device state information and
predict early warnings before the
system stops working.
FLASH PRODUCTS - SSD
12
Swissbit‘s X-500 / 55 2.5“ Industrial SATA II SSDs are
designed for demanding applications. The Solid State
Drives are a rugged, high performance and extremly
reliable storage solution. The data rate reaches up to
240 MB/sec and an impressive 14’500 IOPS with 4 KB
random accesses. The high end architecture utilizes up
to 8 channels with the most reliable SLC (X-500) or
EM-MLC (X-55) NAND Flash available on the market. Therefore
the X-55 series provides a up to 10 times higher endurance
than commercial MLC 2.5“ SSDs. Special features such as
ATA-8, NCQ and TRIM support enable higher IOPS (input / 
output per second) and sequential performance providing
the best combination and reliability for industrial applications.
Additionally, the S.M.A.R.T. (Self-Monitoring, Analysis and
Reporting Technology) protocol with extended lifetime
monitoring tools and software development kit enables
users to have full control of mission critical data at any given
time. The BCH-ECC (Error Correction Code) in combination
with an intelligent power fail protection mechanism
guarantee for the highest possible data reliability.
The X-500 / 55 Series include various options for secure erase,
purge and sanitize methods that can be triggered over
software commands or through a feature connector pin.
SATA SSD 2.5“
NAND FLASH PRODUCTS
X-500 FEATURE SET
ENHANCED SECURE
ERASE OPTIONS
supported; SW configurable; non-typical;
default implemented; on request; not available
X-500
X-55
X-500 /55
SSD
COMMER-
CIAL SSD
Life Time Monitoring / S.M.A.R.T.
Temperature Sensor
ATA Security Feature Set
Basic Erase
DoD5220.22-M
NSA (Manual 130-2)
USA AirForce AFFSSI 5020
USA Army 380-19
USA Navy NAVSO P-5239-26
IREC (IRIG) 106-07 Ch. 10
NSA 9-12
13
NAND FLASH PRODUCTS
- Power Fail Protection
- Advanced Wear Leveling & Block Management
- Enhanced Secure Erase Features available
- High random IOPS & Sequential Performance
- Ruggedized for “no-compromise” design
- Self Monitoring Analysis and
Reporting Technology (S.M.A.R.T.)
- Life Time Monitoring Application &
Software Development Kit (SDK / API)
- Controlled BOM & PCN process
- In-field FW update
SATA SSD 2.5“
SOLID STATE DRIVE
Series X-500 X-55
Interface Compliance SATA II (3 Gbit/s) - ATA8
Connector 15 + 7 pin serial ATA with latch protection / 
special feature connector
Physical Form 100,2 x 69,85 x 9,3 mm
Flash Type SLC EM*-MLC
Density 16 GB - 512 GB 30 GB - 480 GB
Write Endurance @ 64 GB ref. ~2700 TBW** ~420 TBW**
Data Retention 10 years @ life begin 5 years @ life begin
Flash Shrink Interval ~ 36 months ~ 18 months
Performance
Sequential Read
Sequential Write
IOPS 4 KB Read
IOPS 4 KB Write
up to 240 MB/sec
up to 200 MB/sec
up to 14‘500
up to 7‘000
up to 220 MB/sec
up to 160 MB/sec
up to 12‘000
up to 5‘500
Operating Temperature Commercial: 0°C to +70°C
Industrial: -40°C to +85°C
Storage Temperature -55°C to +95°C
Shock MIL-STD810; 2‘000 G, 0.4 ms; 50 G, 11 ms
Vibration MIL-STD810; 20 G, 10-2‘000 Hz random
Access Time <0.2ms“
MTBF ≥ 2‘000‘000 hours
Voltage 5 V ±10 % (optional 3.3 V Type)
Power Consumption Slumber 0.7 W / IDLE 1 W / Max 3.5 W
Special Features NCQ, TRIM, S.M.A.R.T., ATA Security feature set,
Enhanced Secure Erase (SW / HW)
Tools
Windows / Linux Application & SDK
for extended S.M.A.R.T. option,
Formatting and Trim
Part Number SFSAxxxxQvBJxss-t-dd-rrr-ccc
LOCKING / LATCHING
SATA CONNECTOR
The device is designed with a
latching SATA connector. Multiple
notches support the latching
cables for highest vibration and
shock resistance.
Cross Section
* Endurance Managed; ** Tera Bytes Written, depends on application workload
14 NAND FLASH PRODUCTS
Swissbit‘s 2.5” Solid-State Drive (SSD) portfolio for low to
medium density applications oers drop-in replacements
for traditional 2.5“ hard disk drives (HDD) with. These SSD
are oered in both, Parallel ATA (PATA)/IDE and Serial ATA
(SATA) interfaces. The P-120 and X-200 series are designed
for long-term industrial usage and support key require-
ments such as long data retention, no compromise power
fail safety and long product life cycles. Both SSD lines use
the most reliable SLC Flash in combination with rugged
hardware design and approved firmware technologies in
order to provide the best performance in quality, relia-
bility and data integrity.
Up to medium density ranges and especially in harsh
conditions, Swissbit‘s SSDs P-120 and X-200 are the HDD
replacement of choice.
2.5“ SSD SATA & PATA / IDE
Industry Leading; default implemented; on request; not available
P-120
X-200
44pin PATA/IDE cable that can
be used for the P-120 Series
SATA combo cable with signal
and power which can be used for
X-200 Series
15
PATA SSD 2.5“
SOLID STATE DRIVE
SATA SSD 2.5"
SOLID STATE DRIVE
Series P-120 X-200
Interface Compliance IDE / ATA 133 SATA II - 3 Gbit/s
Connector ATA 44 pin, 2 mm pitch 15 + 7 pin serial ATA
Physical Form 100.2 x 69.85 x 9.0 mm 100.2 x 69.85 x 9.0 mm
Flash Type SLC 4xnm SLC 4xnm / 3xnm
Density 4 GB - 32 GB 4 GB - 128 GB
Data Retention 10 year @ life begin 10 year @ life begin
Operating Temperature Commercial: 0°C to +70°C
Industrial: -40°C to +85°C
Commercial: 0°C to +70°C
Industrial: -40°C to +85°C
Storage Temperature -50°C to +100°C -50°C to +100°C
Shock 1 500 G 1 500 G
Vibration 20 G 20 G
Humidity 85 % RH 85°C, 1 000 hrs 85 % RH 85°C, 1 000 hrs
Data Transfer Mode MDMA2 instead of MDMA4 up to PIO4, MDMA2, UDMA6
Performance
Burst Rate
Read Seq.
Write Seq.
up to 66 MB/s
up to 45 MB/s
up to 35 MB/s
up to 300 MB/s
up to 120 MB/s
up to 95 MB/s
Voltage 5 V +/- 10 % 5 V +/- 10 %
Power Consumption
PIO typ 55 mA
UDMA typ 135 mA
Idle 5 mA
UDMA6 typ 260 mA
max 320 mA
Idle 140 mA
Marking
Swissbit, Density, CE, Pb free, Part
Number, Lot Code, Mfg. Date, Master /
 Slave configuration
Swissbit, Density, CE, Pb free, Part
Number, Lot Code, Mfg. Date
Target Application Industrial Embedded Systems, Medical Solutions, Point-of-Sale, Gaming Industry,
Automation Solutions, Telecommunication, Measurement, Transportation, etc.
Tools Windows Freeware Application, API/DLL for extended
S.M.A.R.T. option
Part Number SFPAxxxxQvBOxss-t-dd-2r3-STD SFSAxxxxQvBRxss-t-dd-2r6-STD
- Ideal Replacement for 2.5“
SATA HDDs
- Low Power Consumption
- No Noise or Temperature Issues
- High Durability
- S.M.A.R.T. support
- Advanced Wear Leveling & Block
Management
- Power Fail Protection
- Security Features available
NAND FLASH PRODUCTS
- ATA 133 compliant
- Sophisticated Wear Leveling
& Bad Block Management
- S.M.A.R.T. support with
extended command set
- Intelligent Power Fail
Protection & Recovery
- Security Features available
16
CFASTTM CARD – THE NEXT COMPACTFLASHTM GENERATION
The CFast™ card combines two existing industry standards into a single new
product: the CompactFlash™ (CF) card form factor and the Serial ATA (SATA)
interface commonly used with Hard Disks. CFastTM cards can replace both HDDs
and CompactFlash™ cards in applications requiring small form factors, long life
endurance and the ability to withstand shock, vibration, extreme temperatures
(-40°C to +85°C), high altitude and rough environmental conditions.
Swissbit’s CFast™ is designed to provide rugged storage for embedded and
industrial systems. In these markets, performance, data and system reliability,
system downtime, power fail robustness and flexibility are important design
considerations.
The CFast™ card operates with a 3.3 Volt low power source and supports three
SATA power management states: Active, Partial and Slumber. This standard is
a perfect choice for both, boot devices and removable applications, where
low to medium storage densities (up to 64GB) are required and the physical
size of conventional mechanical or solid state hard drives are impractical.
Additionally, the Swissbit CFast™ card comes with full engineering and
customization support and life time monitoring features, such as S.M.A.R.T. and
our intelligent flash managing algorithms and Error Correction, and will continue
to provide the same high level of reliability.
MSATA SSD, SLIM SATA & CFASTTM
100.20 mm
69.85 mm
SATA 2.5“
SOLID STATE DRIVE
39 mm
54 mm
SLIM SATA SSD
MO-297
50.80 mm
29.85 mm
mSATA SSD
MO-300 full size
36.40 mm
42.80 mm
CFastTM Card
PRODUCT SIZE COMPARISION
The X-200 Series Slim SATA & mSATA
embedded SSD standard is ratified
by JEDEC under specification number
MO-297 & MO-300. These pro
ducts
are designed as a cost efficient
Solid
State Drive alternative to larger size
SSDs in embedded applications.
The Slim SATA X-200s includes the
same standard 22-pin SATA connector
as the 2.5” drives. This allows system
designers to leverage standard SATA
cabling or host connections for their
application.
SLIM SATA SSD (MO-297)
MSATA SSD (MO-300)
NAND FLASH PRODUCTS
Industry Leading; default implemented; on request; not available
X-200m / X-200s
F-100
F-240
17
mSATA SSD
MO-300 full size
SLIM SATA SSD
MO-297
CFASTTM CARD CFASTTM CARD
Series X-200m X-200s F-100 F-240
Interface Compliance SATA II - 3 Gbit/s
ATA7
SATA II - 3 Gbit/s
ATA7
CFast™ - SATA II - 3 Gbit/s
ATA7
CFast™ – SATA II - 3 Gbit/s
ATA8 / ATA7 compliant
Connector 52 pin PCI Express (PCIe) mini 15 + 7 pin Serial ATA CFast™ Type I CFast™ Type I
Physical Form
50.8 x 29.85 x 3.3 mm
(MO-300 full size)
54 x 39 x 4.00 mm
(MO-297) 36.4 X 42.8 X 3.6 mm 36.4 X 42.8 X 3.6 mm
Flash Type SLC SLC SLC SLC
Density 2 GB - 64 GB 2 GB - 64 GB 2 GB - 32 GB 2 GB - 64 GB
(lower densities on request)
Data Retention 10 year @ life begin 10 year @ life begin 10 year @ life begin 10 year @ life begin
Operating Temperature Commercial: 0°C to +70°C
Industrial: -40°C to +85°C
Commercial: 0°C to +70°C
Industrial: -40°C to +85°C
Commercial: 0°C to +70°C
Industrial: -40°C to +85°C
Commercial: 0°C to +70°C
Industrial: -40°C to +85°C
Storage Temperature -50°C to +100°C -50°C to +100°C -50°C to +100°C -50°C to +100°C
Shock 1 500 G 1 500 G 1 500 G 1 500 G
Vibration 20 G 20 G 20 G 20 G
Humidity 85 % RH 85°C, 1 000 hrs 85 % RH 85°C, 1 000 hrs 85% RH 85°C, 1 000 hrs 85 % RH 85°C, 1 000 hrs
Data Transfer Mode up to PIO4, MDMA2, UDMA6 up to PIO4, MDMA2, UDMA6 up to PIO4, MDMA2, UDMA6 up to PIO4, MDMA2, UDMA6
Performance
Burst Rate
Read Seq.
Write Seq.
Write Rand. 4k
up to 300 MB/s
up to 120 MB/s
up to 95 MB/s
up to 300 MB/s
up to 120 MB/s
up to 95 MB/s
up to 300 MB/s
up to 120 MB/s
up to 95 MB/s
up to 300 MB/s
up to 130 MB/s
up to 100 MB/s
up to 600 IOPS
Voltage 3.3 V +/- 5 % 5 V +/- 10 % 3.3 V +/- 5 % 3.3 V +/- 5 %
Power Consumption typ 300 mA, max 490 mA
Idle 180 mA
typ 260 mA, max 320 mA
Idle 140 mA
typ 300 mA, max 420 mA
Idle 180 mA
typ 140 mA, max 250 mA
Idle 55 mA, Sleep 5 mA
Marking Swissbit, Density, Part Number, Lot Code, Mfg. Date WEEE, Swissbit, Density, CE, Part Number, Lot Code,Mfg. Date, RoHS
Target Application Industrial Embedded Systems, Medical Solutions, Point-of-Sale, Gaming Industry,
Automation Solutions, Telecommunication, Measurement, Transportation, etc.
Tools Windows Freeware Application, API/DLL for extended
S.M.A.R.T. optional
Windows Freeware Application,
API/DLL for extended S.M.A.R.T.
optional
Evaluation kit with 2.5” SATA
adapter board available
Windows / Linux Freeware
Application, API/DLL for
extended S.M.A.R.T. optional
Evaluation kit with 2.5” SATA
adapter board available Security
& SBZoneProtection option
Part Number SFSAxxxxUvBRxss-t-dd-2r6-STD SFSAxxxxVvBRxss-t-dd-2r6-STD SFCAxxxxHvBRxss-t-dd-2r6-STD SFCAxxxxHvBVxss-t-dd-2r6-STD
- Ideal Replacement for 2.5“ SATA HDDs
- Cost ecient SATA SSD module
- SATA II Interface compliant
- Advanced Wear Leveling & Block Management
- S.M.A.R.T. support
- Power Fail Protection
- Power modes (slumber, sleep)
- Low Power removable
or fix SATA SSD
- High IOPS performance
for 4k write (no DRAM)
- Sophisticated Wear Leveling
& Bad Block Management
- Read Disturb Management
- Intelligent Power Fail
Protection & Recovery
- S.M.A.R.T. support with
extended command set
- Trim support
- SBZoneProtection option
- Alternative for expensive
SATA SSD
- Replacement for CFC by
SATA Chipset
- SATA II Interface compliant
- Advanced Wear Leveling &
Block Management
- S.M.A.R.T. support
- Power Fail Protection
NAND FLASH PRODUCTS
18
COMPACTFLASHTM CARD
NAND FLASH PRODUCTS
FEATURE COMPARISON
default implemented; on request; not available;
C-300 C-300
Longevity
C-320 C-440
Power Fail Protection
Power Fail Recovery
SLC NAND Flash
Controlled BOM / PCN Process
Standard S.M.A.R.T. Support
Security Erase / Security Feature Set
Read Optimized
High Small file write performance
Read Disturb Management
Trim support
PC-Card mode compatibility / legacy system
Industry Leading; default implemented; on request; not available
C-300
C-300
LONGEVITY
C-320
C-440
To this day CompactFlashTM (CF) cards are still the most popular Flash-based
storage solution used in the embedded and industrial markets and both
form factor and connector are well established. Swissbit‘s CF Cards are
developed with strong focus on quality, reliability, robustness and longevity.
We only select components and apply design rules fitting the stringent
requirements of our industrial customers. Hardware and firmware have been
tested and qualified by our experienced team and features and functionality
have been proven in many challenging customer applications.
Swissbit‘s CF Series C-3x0 and C-4x0 come in both, commercial (0°C to 70°C)
and industrial temperature (-40°C to 85°C) ranges, providing rugged and
reliable memory for a wide range of demanding applications. They are
designed to solve a broad range of concerns from compatibility, booting
and power fail safety issues to long-term supply, controlled BOM and out-
standing Flash protocol handling techniques to ensure highest possible data
integrity. In contrast to commonly promoted sequential performance values,
Swissbit is especially focusingon optimized random access values, being
one of the key requirements in industrial applications.
19
LONGEVITY UDMA6 CF
COMPACTFLASH™
CARD
COMPACTFLASH™
CARD
COMPACTFLASH™
CARD
COMPACTFLASH™
CARD
Series C-300 C-300 Longevity C-320 C-440
Interface Compliance CFA4.1 / CFA3.0
True IDE / PC card
CFA4.1 / CFA3.0
True IDE / PC card
CFA4.1 / CFA3.0
True IDE / PC card
CFA5.0 / CFA4.1 & 3.0 compliant
True IDE / PC card
Connector CFC Type I CFC Type I CFC Type I CFC Type I
Physical Form 36.4 x 42.8 x 3.3 mm 36.4 x 42.8 x 3.3 mm 36.4 x 42.8 x 3.3 mm 36.4 x 42.8 x 3.3 mm
Flash Type SLC SLC 34nm long-term support SLC SLC
Density 128 MB to 8 GB 32 MB to 8 GB 2 GB to 32 GB 2 GB to 64 GB, others on
request
Data Retention 10 year @ life begin 10 year @ life begin 10 year @ life begin 10 year @ life begin
Operating Temperature Commercial: 0°C to +70°C
Industrial: -40°C to +85°C
Commercial: 0°C to +70°C
Industrial: -40°C to +85°C
Commercial: 0°C to +70°C
Industrial: -40°C to +85°C
Commercial: 0°C to +70°C
Industrial: -40°C to +85°C
Storage Temperature -50°C to +100°C -50°C to +100°C -50°C to +100°C -50°C to +100°C
Shock 1 500 G 1 500 G 1 500 G 1 500 G
Vibration 20 G 20 G 20 G 20 G
Humidity 85 % RH 85°C, 1 000 hrs 85 % RH 85°C, 1 000 hrs 85 % RH 85°C, 1 000 hrs 85 % RH 85°C, 1 000 hrs
Data Transfer Mode Up to UDMA4, MDMA4 & PIO6 Up to UDMA4, MDMA4 & PIO6 Up to UDMA4, MDMA4 & PIO6 Up to UDMA6, MDMA4 & PIO6
Performance
Burst Rate
Read Seq.
Write Seq.
Write Rand. 4k
up to 66 MB/s
1ch up to 24 MB/s
2ch up to 37 MB/s
1ch up to 10 MB/s
2ch up to 20 MB/s
> 100 kB/s
up to 66 MB/s
1ch up to 24 MB/s
2ch up to 37 MB/s
1ch up to 10 MB/s
2ch up to 20 MB/s
> 150 kB/s
up to 66 MB/s
up to 45 MB/s
up to 35 MB/s (512 MB-13 MB/s)
> 90 kB/s
up to 133 MB/s
up to 65 MB/s
up to 40 MB/s
up to 300 IOPS
Voltage 3.3 V +/- 5 %, 5 V +/- 10 % 3.3 V +/- 5 %, 5 V +/- 10 % 3.3 V +/- 5 %, 5 V +/- 10 % 3.3 V +/- 5 %, 5 V +/- 10 %
Power Consumption
PIO typ 50 mA @ 3.3 V
DMA typ 70 mA @ 3.3 V
DMA typ 110 mA @ 5 V
PIO typ 50 mA @ 3.3 V
DMA typ 70 mA @ 3.3 V
DMA typ 110 mA @ 5 V
PIO typ 60 mA @ 3.3 V
DMA typ 90 mA @ 3.3 V
DMA typ 130 mA @ 5 V
PIO typ 60 mA @ 3.3 V
DMA typ 80 mA @ 3.3 V
DMA typ 90 mA @ 5 V
Marking WEEE, Swissbit, Density, CE, Part Number, Lot Code, RoHS
Target Application Industrial Embedded Systems, Medical Solutions, Point-of-Sale, Gaming Industry,
Automation Solutions, Telecommunication, Measurement, Transportation, etc.
Tools Windows Freeware Application, API/DLL for extended S.M.A.R.T. option
Security & SBZoneProtection option
Part Number SFCFxxxxHxBK1ss-t-xx-5r3-SMA 1ch
SFCFxxxxHxBKxss-t-xx-5r3-SMA 2ch
SFCFxxxxHxBK1ss-t-xx-5r3-SMA 1ch
SFCFxxxxHxBKxss-t-xx-5r3-SMA 2ch SFCFxxxxHxBOxss-t-dd-5r3-SMA SFCFxxxxHvBUxss-t-dd-5r7-STD
- Sophisticated Wear Leveling & Bad Block Management
- S.M.A.R.T. support with extended command set
- Intelligent Power Fail Protection & Recovery
- Security Features available
- Low power consumption
- High IOPS performance
for 4k write (no DRAM)
- Sophisticated Wear Leveling
& Bad Block Management
- Read Disturb Management
- Intelligent Power Fail
Protection & Recovery
- S.M.A.R.T. support with
extended command set
- Trim support
- SBZoneProtection option
NAND FLASH PRODUCTS
20
Swissbit‘s Industrial MICRO SD Memory Cards are specifically designed, manufactured and tested to
withstand extreme environmental conditions. Each of our product series is
designed for a specific application with its unique requirements towards longevity, life time,
endurance, temperature, data retention or cost.
In addition to the fully Industrial MICRO SD Memory Cards such as the S-200u, Swissbit has
developed the S-40u which targets lower endurance cost sensitive, high volume applications
where data reliability over the full life-cycle up to 10 years is a critical concern.
The S-40u MICRO SD cards are Swissbit’s latest series of Industrial MICRO SD Memory Cards and
are specifically designed, manufactured and qualified for high density, cost sensitive applications
with a lower write endurance requirements. The combination of MLC (Multi Level Cell) NAND
Flash with an optimized Flash controller and firmware allow for long data retention and long
life cycles despite the write endurance limitations of MLC.
The special firmware features in the S-40u series include powerful built-in Error Correction, read
retry, background Data Care Management, randomizer, sophisticated Wear Leveling & Bad Block
Managementalgorithms and power fail protection. They offer industry leading write endurance
and through the implementation of the UHS-I interface, allow for data transfer rates of up to 80 MB/s.
All of Swissbit‘s MICRO SD cards can withstand extreme environmental conditions. They are designed
to maximum mechanical stability and enhanced ESD protection. Furthermore, the hard gold SD
connectors will last a minimum of 20,000 insertions.
FLASH MANAGEMENT
MECHANISM
- Optimized Error Correction Code
- Efficient algorithms for Bad Block
Management
- Real Life Time Monitoring
- Sophisticated Wear Leveling &
Bad Block Management
- Power Fail Robustness
NAND FLASH PRODUCTS
MICRO SD
Industry Leading; default implemented;  1) inherently protected by molding process; not available
S-200U  1)
S-300U  1)
S-40U  1)
S-450U  1)
21
WORLD‘S
MOST
RELIABLE
SLC FLASH
FITTING
MICRO SD
MICRO SD
MEMORY CARD
(SD / SDHC)
MICRO SD
MEMORY CARD
MICRO SD
MEMORY CARD
(SD / SDHC)
MICRO SD
MEMORY CARD
(SD / SDHC)
Series S-300µ S-200µ S-40u S-450u
Interface Compliance SDA 2.0, SDHC class 6 / 10 SDA 2.0, SDHC class 6 SDA 3.0, SDHC class 6 SDA 3.0, SDHC class 10, UHS-I
Connector
Physical Form
MICRO SD
15.0 x 11.0 x (0.7) 1 mm
Flash Type SLC 2x nm SLC 4x nm MLC 1x nm SLC 2x nm
Density 2 GB - 8 GB 512 MB - 2 GB 4 GB - 16 GB 512 MB - 16 GB
Data Retention 10 year @ life begin
Operating Temperature Extended: -25°C to +85°C
Industrial: -40°C to +85°C
Storage Temperature -40°C to +85°C -40°C to +100°C
Shock 1 500 G
Vibration 50 G
Humidity 93 % RH 40°C, 500 hrs 85 % RH 85°C, 1 000 hrs
Data Transfer Mode SD
Performance
Burst Rate
Read Seq.
Write Seq.
up to 25 MB/s
up to 24 MB/s
up to 22 MB/s (1/2 GB - 12 MB/s)
up to 25 MB/s
up to 21 MB/s
up to 18 MB/s
up to 25 MB/s
up to 24 MB/s
up to 11 MB/s
up to 104 MB/s
up to 80 MB/s
up to 75 MB/s
Voltage 2.7 - 3.6 V Normal
2.0 - 3.6 V Basic Communication
Power Consumption Read typ 50 mA
Write typ 50 mA
Read typ 30 mA
Write typ 40 mA
Read typ 40 mA
Write typ 60 mA
Read typ 100 mA
Write typ 100 mA
Marking Swissbit, Part Number, Lot Code, Mfg. Date
Target Application
Networking, Telecommunication,
Enterprise Computing, Measure-
ment, Point-of-Sale, etc.
Industrial Embedded Systems, Medical Solutions, Point-of-Sale, Gaming Industry,
Automation Solutions, Telecommunication, Measurement, Transportation, Automotive etc.
Tools – Life Time Monitoring with SD / SPI command set, Diagnostic
Part Number SFSDxxxxNvBWxss-t-dd-1r1-STD SFSDxxxxNxBNxss-t-dd-1r1-STD SFSDxxxxNxBMxss-t-de-1r1-STD
d=G,L,H
SFSDxxxxNxBMxss-t-de-1r1-STD
d=M,D,Q
- Compliant with SDA 2.0 / 3.0 Specification
- Sophisticated Wear Leveling & Bad Block Management
- Life Time Monitoring over extended command set
- Intelligent Power Fail Protection & Recovery
- Compliant with SDA3.0
Specification, fast UHS
transfer modes
- Sophisticated Wear Leveling
& Bad Block Management
- Life Time Monitoring with
extended command set
- Intelligent Power Fail
Protection & Recovery
- FW update
NAND FLASH PRODUCTS
- Compliant with SDA2.0
Specification
- Advanced Wear Leveling &
Block Management
- Power Fail Protection
22
Swissbit’s Industrial SecureDigital (SD) card series are specifically designed, manufactured and tested
to withstand extreme environmental conditions. The use of SLC Flash in the S-200 / 220 series combined
with an optimized Flash controller provide a number of enhanced product features such as built-in
error correction, sophisticated Wear Leveling & Bad Block Managementalgorithms, power fail protection
and power saving modes. A high reliability housing with special connector support is used for
providing resistance against bending and torque. The S-40 SD cards are Swissbit’s latest series of
Industrial SD Memory Cards and are specifically designed, manufactured and qualified for high
density, cost sensitive applications with lower write endurance requirements. The combination of MLC
(Multi Level Cell) NAND Flash with an optimized Flash controller and firmware ensure long data
retention and long life-cycles despite the write endurance limitations of MLC.
The special firmware features in the S-40 series include a powerful built-in Error Correction, read
retry, background Data Care Management, randomizer, sophisticated Wear Leveling & Bad Block
Managementalgorithms, and power loss protection.
S-450 cards with SLC (Single Level Cell NAND Flash) are managed with the same sophisticated algo-
rithms. They oer industry leading write endurance and through the implementation of the UHS-I
interface, allow for data transfer rates of up to 80  MB/s.
All of Swissbit‘s SD cards can withstand extreme environmental conditions. They are designed to
maximum mechanical stability and enhanced ESD protection. Furthermore, the hard gold SD connectors
will last a minimum of 20,000 insertions.
FLASH MANAGEMENT
MECHANISM
- Optimized Error Correction Code
- Efficient algorithms for Bad Block
Management
- Diagnostic with real Life Time
Monitoring
- Sophisticated Wear Leveling &
Bad Block Management
- Power Fail Robustness
NAND FLASH PRODUCTS
SD MEMORY CARD
Industry Leading; default implemented;  1) inherently protected by molding process; not available
S-200/220
S-40  1)
S-450  1)
23
NAND FLASH PRODUCTS
WORLD‘S MOST
RELIABLE SLC
FLASH
SD MEMORY
CARD
(SD / SDHC)
SD MEMORY
CARD
(SD / SDHC)
SD MEMORY
CARD
(SD / SDHC)
Series S-200 / 220 S-40 S-450
Interface Compliance SDA 2.0, SDHC class 6 (10) SDA 3.0, SDHC class 6 SDA 3.0, SDHC class 10, UHS-I
Connector SD
Physical Form 32.0 x 24.0 x 2.1 mm
Flash Type SLC MLC SLC
Density 512 MB - 8 GB 4 GB - 32 GB 512 MB - 32 GB
Data Retention 10 year @ life begin
Operating Temperature Extended: -25°C to +85°C
Industrial: -40°C to +85°C
Storage Temperature -40°C to +100°C
Shock 1 000 G 1 500 G
Vibration 15 G 50 G
Humidity 85 % RH 85°C, 1 000 hrs 85 % RH 85°C, 1 000 hrs
Data Transfer Mode SD, SPI
Performance
Burst Rate
Read Seq.
Write Seq.
up to 25 MB/s
up to 21 MB/s
up to 18 MB/s (512 MB - 13 MB/s)
up to 25 MB/s
up to 24 MB/s
up to 11 MB/s
up to 104 MB/s
up to 80 MB/s
up to 75 MB/s
Voltage 2.7 - 3.6 V Normal
2.0 - 3.6 V Basic Communication
2.7 - 3.6 V Normal
2.0 - 3.6 V Basic Communication
2.7 - 3.6 V Normal
2.0 - 3.6 V Basic Communication
Power Consumption Read typ 28 mA (max 60 mA)
Write typ 55 mA (max 90 mA)
Read typ 40 mA
Write typ 60 mA
Read typ 100 mA
Write typ 100 mA
Marking Swissbit, Density, CE, Pb free, WEEE,
Part Number, Lot Code, Mfg. Date
Target Application Industrial Embedded Systems, Medical Solutions, Point-of-Sale, Gaming Industry,
Automation Solutions, Telecommunication, Measurement, Transportation, Automotive etc.
Tools Life Time Monitoring with SD / SPI command set
Part Number SFSDxxxxNvBWxss-t-dd-1r1-STD SFSDxxxxLxBMxss-t-de-1r1-STD
d=G,L,H
SFSDxxxxLxBMxss-t-de-1r1-STD
d=M,D,Q
- Compliant with SDA 3.0
Specification
- Sophisticated Wear Leveling
& Bad Block Management
- Life Time Monitoring over
extended command set
- Intelligent Power Fail
Protection & Recovery
- optimized for heavy read
applications
- Compliant with SDA 3.0
Specification with fast UHS
transfer modes
- Sophisticated Wear Leveling
& Bad Block Management
- Life Time Monitoring over
extended command set
- Intelligent Power Fail
Protection & Recovery
- optimized for heavy read
applications
- Compliant with SDA 2.0
Specification
- Sophisticated Wear Leveling
& Bad Block Management
- Life Time Monitoring over
extended command set
- Intelligent Power Fail
Protection & Recovery
24
The Universal Serial Bus (USB) interface is very well established and has almost
entirely replaced any other forms of serial or parallel interfaces for computer
peripherals and memory storage devices. Advantages of USB are its flexibility,
reasonably fast sequential data transfer rate and its ability to obtain power
through the connector. Almost every computer or embedded system supports
devices either via the standard USB socket or internal on-board terminal
headers. Swissbit oers both in dierent form factors and in commercial and
industrial operating temperature ranges. State of the art NAND Flash handling
algorithms, stringent component selection, product change control and a
100% in-process final system test at full temperature range (-40°C to +85°C)
qualify Swissbit’s USB Flash Drive (UFDs) especially for embedded and industrial
markets.
Swissbit’s U-110 Series (USB Flash Module) oers a no compromise flash based
storage solution for:
• Embedded PCs that need a rugged reliable storage solution
• Servers with backup or recovery functionality
• General industrial computers with needs for easy to use boot mediums
All Swissbit USB solutions combine security features and Life Time Monitoring
tools for product life control.
UNIVERSAL SERIAL BUS – USB FLASH DRIVE / MODULE
NAND FLASH PRODUCTS
default implemented; on request; not available
miniTWIST II
unitedCONTRAST II
USB FLASH
MODULE U-110
25
USB FLASH MODULE USB FLASH DRIVE USB FLASH DRIVE
Series U-110 unitedCONTRAST II miniTWIST/CAP II
Interface Compliance USB 2.0 high speed (480 Mbit/s), USB 1.1 compliant
Connector Standard: 2.54 mm - 10 Pin
Low Profile: 2.00 mm - 10 Pin USB 2.0 A-Plug
Physical Form 36.8 mm x 26.65 mm x 2.4 mm 68.0 mm x 18.0 mm x 8.0 mm 55.0 mm x 16.0 mm x 7.0-8.0 mm
Flash Type SLC
Density 1 GB to 16 GB 512 MB to 16 GB 128 MB to 4 GB
Data Retention 10 year @ life begin
Operating Temperature Commercial: 0°C to +70°C
Industrial: -40°C to +85°C
Commercial: 0°C to +70°C
Storage Temperature -50°C to +100°C
Shock 50 G
Vibration 15 G
Humidity 85 % RH 85°C, 500 hrs
Data Transfer Mode full / high speed
Performance
Read Seq.
Write Seq.
up to 32 MB/s
up to 23 MB/s
up to 18 MB/s
up to 12 MB/s
Voltage 5 V +/-10 %
Power Consumption Full Speed typ 90 mA
High Speed typ 100 mA
Full Speed typ 80 mA
High Speed typ 100 mA
Marking WEEE, Swissbit, Density, CE, FCC, Part
Number, Lot Code WEEE, CE, Swissbit, Density WEEE, CE, Swissbit
Target Application Industrial Embedded Systems, Medical Solutions, Point-of-Sale, Gaming Industry,
Automation Solutions, etc.
Tools Windows – Spare block read out
Part Number
SFUIxxxxJvBPxss-t-dd-2r1-STD-2.54 mm
SFUIxxxxKvBPxss-t-dd-2r1-STD-2.00 mm
SFU2xxxxEvBPxss-t-dd-1r1-STD SFU2xxxxDvBP1ss-t-dd-1r1-STD
- Low power consumption
- Small form factor
- Optimized Wear Leveling
- Rotating clip or cap option
- Password manager available
- Removable drive
NAND FLASH PRODUCTS
- Approved USB host solution
- Hot Pluggable / Plug & Play
- Optimized Wear Leveling
- Custom marking option
- Security features
- Password manager available
- Removable drive
- Bootable USB Drive
- Compliant with USB Specification
2.0 high speed
- Support latest OS as Fixed Drive
- Connector pitch variations
- Robust design and shock
vibration resistant
26
Security is becoming mandatory in diverse markets. Data breaches and
compromised security scenarios are becoming a reality. Customers and
solution providers are rightly concerned about risks, creating a necessity
to improve security in a reliable and flexible fashion.
In the telecommunications market, it has been widely publicized that GSM
calls can easily be tapped. Reports about the mass interception of internet
data on a global scale compromises the trust of the privacy of communications.
Sophisticated attacks on industrial facilities raise questions about liability,
reliability, and environmental risks as well as a threat to human life.
Consumers, governments, enterprises and industry are affected by security
breaches directly or indirectly, visible or invisible.
Swissbit supports our customers in Industrial, Medical, Gouvernment,
Telecommunications and Banking sector to deliver secure systems.
Each and every system requires storage to operate. While globally recognized
as a leader in high-reliable Flash memory solutions, Swissbit also designs,
develops and manufactures security products that provide additional security
functions and features. Swissbit demonstrates a continuous and uninterrupted
migration path towards secure systems while maintaining reliability and
flexibility of existing memory form factors.
Swissbit offers Product Related Services:
• Security firmware and drivers
• Logo printing
• Optical and electronic personalization
• Design-in of consigned smart card chips
As well as Extended Services:
• Security consulting
• Security training
• Customer support
• Design-in support
• Connection with eco system partner network for turn
key solutions and quick time to market
SECURITY PRODUCTS
27
The security product series in the
MICRO SD form factor addresses the
growing demand for mobile and
portable security. The products offer
tangible hardware security in the
same manner as the plug and play
approach.
For various markets the secure MICRO
SD series oers a broad set of security
use cases. The flash memory can be
used by any host to store data to the
cards in high speed. Additionally
security functions of the card can be
activated to protect any data.
Valuable data such as sensitive files,
emails, photos and even voice calls
can be protected by encryption,
access protection or made resistant
SECURITY PRODUCTS – PS-100U SERIES
against tampering by digital signature.
Depending on the use case the best
fitting product can be chosen.
Each and every card of the PS-100u
series is equipped with a highly secure
smart card chip. The block diagram
below illustrates the architecture of
the Swissbit Security Interface, the
Flash Controller and the Encrypted
Flash Chip.
The Swissbit Security Interface em-
powers solution providers to build
applications on various platforms. An
SDK is available to develop applications
on Windows™ and Linux™ PC platforms
and mobile phones and tablets like
Android™ and Blackberry™.
Partner and Customer
solutions (like
applications, services,
middleware,
license control)
Swissbit
Security
Interface
Flash
Controller
AES
APP
Java
Applet
Secure
Element
(Encrypted)
Flash
Memory
28
Compliance SD 3.0 SD, ASSD V1.1
Data transfer SPI mode supported, Speed class 10
Density 4 GB / 8 GB
Temperature
Extended: -25°C to 85°C
Security Infineon SLE 78 smart card chip
CC EAL 5+ HW and OS
Java Card 3.0.4
Global Platform 2.2.1
Smart Card OS jTop ID
RSA up to 2048 bit
optional ECC up to 512/521 bit
AES up to 256 bit
SHA2 up to 512 bit
RNG AIS31, FIPS-140
Compatible Middleware:
• Certgate
• AET SafeSign
• Charismathics
• Cryptovision
80 k EEPROM for applets and secure storage
Drivers / API
WinXP, 7, 8, Vista, Linux,
BlackBerry, Android
SDK available
PS-100u SERIES
SECURITY PRODUCTS
29
The Standard Edition PS-100u SE fits best into authentication and PKI (Public
Key Information) use cases.
The card is supported by leading middleware vendors in mobile, desktop
and tablet use cases to ensure a seamless design-in into existing security
infrastructures.
Typical applications are:
• Mobile email encryption
• Digital signature
• User authentication for PC and mobile login
• True random number generation
The Voice Edition PS-100u VE provides Elliptic Curve Cryptography. The enormous
advantage of computation and security combined with small certificate sizes
make the PS-100u VE card ideal for online key- and certificate exchange.
Solution providers choose the PS-100u VE card to build secure mobile voice
solutions. The users (caller and person called) only need to enter their PIN in
their mobile device and the security chip performs end-to-end encryption
on the behalf of users. All encryption keys for authentication and key
agreements remain highly protected in the card at all times. Only AES key
stream segments suitable for voice stream encryption are passed to the
mobile host application.
The PS-100u VE extends the features of the PS-100u SE.
The PS-100u CL is ideal for ePurse, contactless applications and terminals.
The card can be connected to an external antenna via antenna pads to
communicate via the ISO 14443 contactless protocol. In this configuration all
NFC smart phones can directly communicate with the security chip inside the
card for wallet, payment, ePurse and banking applications.
SECURITY
KNOW + HAVE
K H
PS-100u SE
PS-100u VE
PS-100u CL
default implemented; not available;
30 DRAM MODULES
DRAM MODULES
Swissbit commits to oering the highest quality, JEDEC standard and customized
DRAM modules for industrial applications. As a DRAM module manufacturer,
we use strategic multiple sources of DRAM suppliers to oer our customers a
reliable, long-term supply of leading edge and legacy memory module
products. Special focus is put into working with suppliers that oer extended
availability of DRAM die revisions, avoiding frequent requalification efforts
with our customers.
Swissbit’s quality focus starts with sourcing the highest quality grade DRAMs
and utilizing fully compliant JEDEC module raw cards either as in-house PCB
design or from top quality design partners. For all modules the passives and
other active components selected are of the highest available quality grade.
Using Surface Mount Technology (SMT) processes in production on fully certified
facilities in Germany allows Swissbit to sustain a quality focus during the
entire assembly process. Traceability is guaranteed through the complete
manufacturing and testing flow. We ensure the highest quality level for our
customers with world class application testing. Swissbit uses internally developed
application software to test 100 % of all modules under real world conditions
with diverse pattern and stress methods and to cover the complete memory
array including ECC components by constantly adapting to the latest memory
controller features. For industrial temperature grade modules the application
tests are performed at -40°C and 85°C T AMBIENT.
With a stringent internal product qualification, fast customer return processing
and the dedication to be an always improving company, Swissbit constantly
works on providing its customers the best DRAM modules available on
the market at a competitive price. Swissbit is committed and able to design,
manufacture and test customer-specific module solutions. We offer PCB
design and layout services, development of individual test solutions, thermal
simulations, DRAM component sourcing, controlled manufacturing and
special coating options.
By using Swissbit DRAM modules you can keep the total system cost at
a minimum.
31
DRAM MODULES
DRAM SPECIFIC OPTIONS
DDR3L, THE NEW STANDARD
DDR3 so far has been the interface technology with the
widest range of speed grades. Due to the architectural
features like fly-by-bus, data bus and IO calibration
DDR3 of today has more than twice the speed of the
initial components, and extensions are still in the pipeline.
Due to the technology roadmaps it was possible to signi-
ficantly lower the power consumption. With the latest
DRAM technology it was also possible to reduce the supply
voltage. While the standard DDR3 voltage is at 1.50 V,
the new DDR3L components are operated at 1.35 V,
reducing the memory power consumption by ~15 %
under realistic conditions.
DDR3L has been standardized at JEDEC and is supported
by the latest memory controllers. All new Swissbit DDR3L
modules are fully backwards compatible to DDR3. They
can be operated both with 1.35 V and 1.50 V and be used
both in the newest systems and less recent platforms,
which helps to reduce inventory cost.
DDR1
DIMM / RDIMM
DDR1
SODIMM / SO-RDIMM
DDR2
DIMM / RDIMM
DDR2
SODIMM
DDR3
DIMM
DDR3
RDIMM
DDR3
MINIDIMM
DDR3
SODIMM / SO-UDIMM
DDR3
XR-DIMM
BACKWARDS COMPATIBILITY
Swissbit DDR3L-1600 modules are fully backwards compatible to:
DDR3-800 CL5 DDR3-1066 CL7 DDR3-1333 CL9 DDR3-1600 CL11
DDR3L-800 CL5 DDR3L-1066 CL7 DDR3L-1333 CL9 DDR3L-1600 CL11
default implemented; on request; not available
32
RUGGEDIZED DIMMS
Memory down SODIMM with fixture XR-DIMM
DESIGN-IN / LAYOUT Dicult Easy Easy
FLEXIBILITY OF MEMORY POPULATION Dicult Easy Easy
TESTABILITY AFTER SOLDERING Medium Easy Easy
UPGRADE / REPAIR Dicult Easy Easy
REQUIRED BOARD SPACE Small to Medium Medium to Small Medium to Small
STACKABLE SOLUTION No Yes Yes
PROTECTION AGAINST SHOCK Good
Medium (with glue / strap)
Good
PROTECTION AGAINST VIBRATION Good Bad Good
MEMORY COST Low to Medium Low Medium
 
Designers of rugged platforms face a difficult decision
when planning their memory layout. Either they use
DRAM components directly soldered to the system board,
the most rugged but also expensive and inflexible solu-
tion, or they take standard SODIMMs and try to ruggedize
them by using straps or glue in order to fix them in their
socket.
Swissbit in cooperation with the SFF-SIG consortium
(Small Form Factor – Special Interest Group) has developed
a rugged module called XR-DIMMTM, the abbreviation XR
standing for eXtreme Rugged.
Using special mezzanine connectors and mounting holes
to attach the module to the system board creates a true
rugged system with the easy integration and flexibility
of DIMM solutions and the shock and vibration immunity
of memory down implementations.
The XR-DIMM closely follows the DDR3 72 bit SODIMM
standard and makes design-in as easy as using a JEDEC
module, unburdening the system designer of memory
channel layout.
With multiple module densities the system integrator
can create different memory populations with one
system platform, avoiding multiple system board SKUs
and taking benefit in perfectly tested modules with a
just in time purchase option.
DRAM MODULES
33
Data Rate / CL Density Org Height Voltage Pins Partnumber Package
DDR3-MiniUDIMM 1600 / CL11 2 GB - 8 GB x72 1.18“ / 0.74“ 1.50 V 244 SGLxxx72xxxxxxx-ssRT BGA
DDR2-MicroDIMM 667 / CL5 1 GB x64 1.18“ (29.97 mm) 1.80 V 214 SEMxxx64xxxxxxx-ssR BGA
DDR1-100PIN_DIMM 333 / CL2.5 128 MB - 512 MB x72 1.00“ (25.40 mm) 2.50 V 100 SDUxxx32xxxxxxx-ssR TSOP
MINI-UDIMM / MICRODIMM / 100PIN-DIMM
UNBUFFERED DIMM PRODUCTS
DRAM MODULES
Data Rate / CL Density Org Height Voltage Pins Partnumber Package
DDR3L-UDIMM 1600 / CL11 2 GB - 8 GB x64 1.18“ (29.97 mm) 1.35 / 1.50 V 240 SLUxxx64xxxxxxx-ssR BGA
DDR3L-UDIMM ECC 1600 / CL11 2 GB - 8 GB x72 1.18“ (29.97 mm) 1.35 / 1.50 V 240 SLUxxx72xxxxxxx-ssR BGA
DDR2-UDIMM 800 / CL6 512 MB - 2 GB x64 1.18“ (29.97 mm) 1.80 V 240 SEUxxx64xxxxxxx-ssR BGA
DDR2-UDIMM ECC 800 / CL6 1 GB - 2 GB x72 1.18“ (29.97 mm) 1.80 V 240 SEUxxx72xxxxxxx-ssR BGA
DDR1-UDIMM 400 / CL3 512 MB - 1 GB x64 1.25“ (31.75 mm) 2.50 V 184 SDUxxx64xxxxxxx-ssR TSOP
DDR1-UDIMM ECC 400 / CL3 512 MB - 1 GB x72 1.25“ (31.75 mm) 2.50 V 184 SDUxxx72xxxxxxx-ssR TSOP
LONG UDIMM / WITH AND WITHOUT ECC
Data Rate / CL Density Org Height Voltage Pins Partnumber Package
DDR3L-SODIMM 1600 / CL11 1 GB - 8 GB x64 1.18“ (29.97 mm) 1.35 / 1.50 V 204 SLNxxx64xxxxxxx-ssRT BGA
DDR3L-SO-UDIMM 1600 / CL11 2 GB - 8 GB x72 1.18“ (29.97 mm) 1.35 / 1.50 V 204 SLNxxx72xxxxxxx-ssRT BGA
DDR3-SODIMM 1600 / CL11 1 GB - 8 GB x64 1.18“ (29.97 mm) 1.50 V 204 SGNxxx64xxxxxxx-ssRT BGA
DDR3-SO-UDIMM 1600 / CL11 1 GB - 8 GB x72 1.18“ (29.97 mm) 1.50 V 204 SGNxxx72xxxxxxx-ssRT BGA
DDR3-XR-DIMMTM 1600 / CL11 1 GB - 8 GB x72 38 mm x 67.5 mm 1.35 / 1.50 V 240 SLVxxx72xxxxxxx-ssRT BGA
DDR2-SODIMM 800 / CL6 512 MB - 4 GB x64 1.18“ (29.97 mm) 1.80 V 200 SENxxx64xxxxxxx-ssR BGA
DDR1-SODIMM 400 / CL3 256 MB - 1 GB x64 1.25“ (31.75 mm) 2.50 V 200 SDNxxx64xxxxxxx-ssR BGA
SODIMM / WITH AND WITHOUT ECC / RUGGED XR-DIMM
34 DRAM MODULES
HEAT SPREADER
The critical condition for DRAMs is a high die temperature,
because it leads to loss of cell information. With die sizes
continually shrinking, the power dissipation is concen-
trated on only a few square millimeters. Adding a heat
spreader to a module allows the hot spots to easier
dissipate the temperature over a bigger surface. This
heat spreader levels out the module heat dissipation,
thus reducing the hot spot temperature and improving
the module reliability.
Swissbit oers heat spreader solutions for some of its
industrial temperature grade SODIMMs and MiniDIMMs.
TEMPERATURE SENSOR
For all DDR3 SODIMMs, MiniDIMMs and registered DIMMs,
Swissbit oers as a standard an integrated temperature
sensor within the SPD device. It allows permanent monito-
ring of the module temperature over the system manage-
ment bus.
By utilizing this feature the system management can actually
control the self heating of the module in a more accurate
manner than by using calculation methods for memory
throttling. This results in higher useable bandwidth and
avoids overheating of the module.
INDUSTRIAL TEMPERATURE RANGE
Besides modules for commercial temperature range
0°C to 70°C, Swissbit also oers products for an extended
temperature range of 0°C to 85°C T AMBIENT as well as full in-
dustrial temperature range -40°C to 85°C T AMBIENT.
With intensive application testing of each individual
module at low and high temperature, Swissbit ensures
the highest quality and reliability of their products.
MODULE OPTIONS
CORROSION RESISTANCE
For demanding applications Swissbit uses a thick layer of
30 micro inch gold on the DIMM contacts and special sulfur
corrosion resistant passives to oer highest reliability and
longest lifetime.
CONFORMAL COATING
Industrial DRAM modules often do not operate in a clean
air environment as compared to standard oce or home
conditions. A heavy-industry environment with hot or
humid air, aggressive chloride of sulfite loaded gas or dust
can reduce the life span of a DRAM module by corroding
the PCB lines or solder contacts.
Swissbit oers a full module surface coating with a thin
film of polyurethane which eectively protects against
most hazardous environmental conditions. With this pro-
tection the endurance of the module is heavily improved,
thus reducing maintenance periods and avoiding sudden
breakdown of a system. This option is currently available
for SODIMMs as well as for several Flash products.
35
DRAM MODULES
Data Rate / CL Density Org Height Voltage Pins Partnumber Package
DDR3-RDIMM
ECC+PARITY 1333 / CL9 1 GB - 8 GB x72 1.18“ (29.97 mm) 1.50 V 240 SGPxxx72xxxxxx-ssR BGA
DDR2-RDIMM
ECC+PARITY 800 / CL6 1 GB - 4 GB x72 1.18“ (29.97 mm) 1.80 V 240 SEPxxx72xxxxxxx-ssR BGA
LONG RDIMM / STANDARD HEIGHT / WITH ECC AND C/A PARITY
REGISTERED DIMM PRODUCTS
Data Rate / CL Density Org Height Voltage Pins Partnumber Package
DDR3-MiniRDIMM 1333 / CL9 2 GB – 4 GB x72 0.72“ (18.29 mm) 1.50 V 244 SGHxxx72xxxxxxx-ssR BGA
DDR2-MiniRDIMM 667 / CL5 1 GB x72 0.72“ (18.29 mm) 1.80 V 244 SEHxxx72xxxxxxx-ssR BGA
DDR2-SO-RDIMM 667 / CL5 1 GB - 2 GB x72 1.18“ (29.97 mm) 1.80 V 200 SEGxxx72xxxxxxx-ssR BGA
VLP MINIRDIMM WITH ECC, REGISTERED SO-RDIMM WITH ECC
Data Rate / CL Density Org Height Voltage Pins Partnumber Package
DDR3-RDIMM
ECC+PARITY 1333 / CL9 2 GB - 4 GB x72 0.70“ (17.78 mm) 1.50 V 240 SGPxxx72xxxxxxx-ssR BGA
DDR3-UDIMM
ECC 1333 / CL9 2 GB - 4 GB x72 0.70“ (17.78 mm) 1.50 V 240 SGUxxx72xxxxxxx-ssR BGA
DDR2-RDIMM
ECC+PARITY 800 / CL6 1 GB - 2 GB x72 0.72“ (18.29 mm) 1.80 V 240 SEPxxx72xxxxxxx-ssR BGA
LOW PROFILE LONG RDIMM, UDIMM / WITH ECC
36
SYSTEM-IN-PACKAGE (SIP)
System-in-Package (SiP) is the processing of sensitive bare dies or chips into
robust finished modules or components. With 20 years of experience, Swissbit
successfully uses advanced packaging technologies in order to achieve smallest
form factors and to built Multi-Chip-Packages. With this electronic integration
approach our products provide more functionality or highest memory densities
inside one package, various functional blocks (RF, digital, sensors, security and
memory) are combined, as well as passive components.
Beginning with the wafer and bare die handling, Swissbit utilizes a flexible
chip on board (COB) assembly and packaging line. Processes like SMT assembly,
die bonding, Au and Al wire bonding, dam&fill, transfer molding, precise
separation with laser technology and sawing, housing, labeling, laser marking
etc. are very well established.
Die stacking, especially for Flash and DRAM, is one of our expertise besides
the integration of additional hardware features and an experienced team of
testing and quality engineers. Our own Memory-In-Package line qualifies
(but not limits) Swissbit as the development and production partner for any
dedicated or customized memory–related product with challenging integration
or reliability requirements. If you cannot achieve the special demands regarding
space and performance using traditional components and processes, Swissbit
offers feasibility studies, manages or supports your development project
and produces prototypes and small and mid-size volumes (up to 50’000 pieces / 
month). We will aid you from the time of inception of your project: from the
design phase, prototyping, determining the circuit layout and material
selection, to preparing the appropriate packaging for transport.
Swissbit produces and develops according to ISO 9001:2008, TS 16949 and
ISO 14001 approved processes and is an experienced partner of global industrial
and automotive accounts.
Swissbit´s technology portfolio combined with its strong engineering know-
how and experience enables new innovative MCP (Multi Chip Packages) / SiP /
COB configurations, like stacked dice, side-by-side, sensors integration etc.
System in Package solutions could be smaller, cheaper and having higher
security.
System-in-Package benefits:
• Reduces process complexity
• Lower TCO (total cost of ownership)
• Reduces System Board Space due to smaller sized solutions than
individually packaged ICs
• Layer count reduction in System PCB
• Reduces board mounted height
• Mixed analog / digital design
• Reduces system board test complexity
37
SYSTEM IN PACKAGE (SIP)
CONCEPTION DEVELOPMENT
VERIFICATION &
QUALIFICATION PRODUCTION LOGISTICS
• Product definition
• Feasibility studies
• Verification plan
• Qualification plan
• Design for test
• Design for
Production
• Design to Cost
• Package
development
• Process
development
• Substrate layout
• Test engineering
and development
• Failure analysis
consulting
• Product verification
• Debugging
• Optimization
• Reliability testing
• Life time
• Compliance to CE /
FCC / VCCI, UL,
RoHS, REACH
• Fast prototyping
• Ramp up
• Yield management
• Series production of:
• SMT
• SiP
• C OB
• MCP
• BGA
• Stock management
• Supply chain
management
• One stop sourcing
SWISSBIT SIP AND COB COMPETENCY
SWISSBIT IS OFFERING THE FOLLOWING PRODUCTION TECHNOLOGIES
MARKING
SMD
DIE ATTACH / CHIP BONDING /
DIE STACKING
ENCAPSULATION
SEPARATION /
SINGULATION
WIRE BONDING
ADHESIVE APPLY
CONFORMAL
COATING
38 PART NUMBERS
Swissbit
Memory (1)
Product Dimension (5)
Product Generation (6)
Memory Organization (7)
Technology (8)
Design Option (15)
Configuration (14)
Chips / Channels (9)
Memory Type (2)
F: Flash Products
Product Type (3)
U2: USB 2.0 Flash Drive
CA: CFast™
CF: CompactFlash™
UI: UFD internal / Module
SD: SD Memory Card
MM: Multimedia Card
PA: PATA / IDE
SA: SATA
Density (4)
0016: 16 MB 4096: 4 GB
0032: 32 MB 8192: 8 GB
0064: 64 MB 016G: 16 GB
0128: 128 MB 032G: 32 GB
0256: 256 MB 064G: 64 GB
0512: 512 MB 128G: 128 GB
1024: 1 GB 256G: 256 GB
2048: 2 GB 512G: 512 GB
PIN Mode (13)
0: 1 nCE & R/nB
1: 2 nCE & R/nB
2: 4 nCE & R/nB
A: LGA 1 nCE & R/nB
B: LGA 2 nCE & R/nB
C: LGA 4 nCE & R/nB
S: TSOP 1 nCE & R/nB
T: TSOP 2 nCE & R/nB
U: TSOP 4 nCE & R/nB
E: COB 1 nCE
F: COB 2 nCE
Flash Package Classification (12)
M: SLC SDP (single die package)
D: SLC DDP (dual die package)
Q: SLC QDP (quad die package)
N: SLC ODP (octal die package)
G: MLC SDP (single die package)
L: MLC DDP (dual die package)
H: MLC QDP (quad die package)
O: MLC ODP (octal die package)
Temperature Rating (11)
I: Industrial Temp. (-40°C to +85°C)
E: Extended Temp. (-25°C to +85 / 90°C)
C: Commercial Temp. (0°C to +70°C)
Flash Supplier (10)
SA: Samsung
MT: Micron Technology
HY: SK Hynix
TO: Toshiba
S F CF 2048 H 4 B O2TO IM S * *
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
- - - -
H: CompactFlashTM / CFastTM
J: UFD Module 2.54 mm terminal header
K: UFD Module 2.00 mm terminal header
L: SD Memory Card
N: MICRO SD Memory Card
O: Multimedia Card
Q: SSD 2.5”
U: mSATA (MO-300)
V: SLIM SATA (MO-297)
Flash and Security Part Number Decoder
SWISSBIT PART NUMBER – THE DNA OF YOUR SPECIFIC PRODUCT
39
PART NUMBERS
Data Width (5)
Printed Circuit Board with Revision (6)
Module Ranks (9)
DRAM Revision (8)
Swissbit
Memory (1)
Thermal Sensor (14)
Material (13)
Product Group (2)
S: SDRAM SDR 3.30 V
D: SDRAM DDR 2.50 V
E: SDRAM DDR2 1.80 V
G: SDRAM DDR3 1.50 V
L: SDRAM DDR3L 1.35 / 1.50 V
Module Type (3)
SDR N: 144 Pin SODIMM
DDR U: 184 Pin UDIMM
R: 184 Pin RDIMM
N: 200 Pin SODIMM
M: 172 Pin Micro-DIMM
DDR2 U: 240 Pin UDIMM
R: 240 Pin RDIMM, w/o Parity
P: 240 Pin RDIMM, w/ Parity
F: 240 Pin FBDIMM
N: 200 Pin SODIMM
G: 200 Pin SO-RDIMM
H: 244 Pin MiniRDIMM, w/ Parity
M: 214 Pin MicroDIMM
DDR3 U: 240 Pin UDIMM
DDR3L P: 240 Pin RDIMM
N: 204 Pin SODIMM / SOUDIMM
G: 204 Pin SO-RDIMM
M: 214 Pin MicroDIMM
L: 244 Pin MiniUDIMM
H: 244 Pin MiniRDIMM
V: 240 Pin XR-DIMM
Address Depth / Capacity (4)
008: 8 MB x (5) 01G: 1 GB
016: 16 MB x (5) 02G: 2 GB
032: 32 MB x (5) 04G: 4 GB
064: 64 MB x (5) 08G: 8 GB
128: 128 MB x (5)
256: 256 MB x (5)
32: w/o Parity
36: w/ Parity
64: w/o ECC
72: w/ ECC
Temperature Rating (12)
C: (or blank) (0°C to +70°C)
E: Ext. Temp. (0°C to +85°C)
I: Ext. Temp. (-25°C to +85°C)
W: Ind. Temp. (-40°C to +85°C)
Speed (11)
DDR3 AA: DDR3-800 CL5 BB: DDR3-1066 CL7
CC: DDR3-1333 CL9 DC: DDR3-1600 CL11
DDR2 50: DDR2-400 CL3 37: DDR2-533 CL4
30: DDR2-667 CL5 3A: DDR2-667 CL4
25: DDR2-800 CL6 2A: DDR2-800 CL5
BB: DDR2-1066 CL7
DDR 08: DDR-200 CL2 75: DDR-266B CL2.5
70: DDR-266A CL2 7A: DDR-266A CL2
60: DDR-333B CL2.5 6A: DDR-333A CL2
50: DDR-400B CL3 5A: DDR-400A CL2.5
SDR 10: PC-100 CL3 08: PC-100 CL2
75: PC-133 CL3 70: PC-133 CL2
DRAM Manufacturer (10 )
MT: Micron Technology
EP: Elpida
QI: Qimonda
SA: Samsung
HY: SK Hynix
WI: Winbond
1: 1 Rank Module
2: 2 Rank Module
DRAM Organization (7)
A: x4
D: x4 TSOP Stack
B: x8
E: x8 TSOP Stack
C: x16
G: x4 BGA Stack
SLN08G 64 E2 BD2SA DC *RT
1 2 3 4 5 6 7 8 9 10 11 12 13 14
-
DRAM Part Number Decoder
R: RoHS conform
S: RoHS conform, Sulfur resistant
40
EMEA / APAC
Swissbit AG
Industriestrasse 4
CH-9552 Bronschhofen
Switzerland
Tel. +41 71 913 03 03
Fax +41 71 913 03 15
industrial@swissbit.com
Americas
Swissbit NA Inc.
1117 E Plaza Drive Unit E Suite 105 / 205
Eagle, Idaho 83616
USA
Tel. +1 208 938 4525
Fax +1 914 935 9865
sales@swissbitna.com
Japan
Swissbit Japan Co., Ltd.
3F, 2-1-24 Koenji-Kita,
Suginami-ku, Tokyo 166-0002
Japan
Tel. +81 3 5356 3511
Fax +81 3 5356 3512
industrial@swissbit.co.jp
SWISSBIT SALES LOCATIONS WORLDWIDE
Swissbit AG
Industriestrasse 4
CH-9552 Bronschhofen
Switzerland
Tel. +41 71 913 03 03
Fax +41 71 913 03 15
info@swissbit.com
HEADQUARTERS
WWW.SWISSBIT.COM
Version 3.0
Greater China
Swissbit Asia
2F, No. 125, Shengli 2nd Rd,
Zhubel City, Hsinchu County 302
Taiwan (R.O.C.)
Tel. +886 3 550 8166
Fax +886 3 550 8126
salesasia@swissbit.com
Swissbit NA Inc.
18 Willett Avenue, Suite 202
Port Chester, New York 10573
USA
Tel. +1 914 935 1400
Fax +1 914 935 9865
sales@swissbitna.com
Swissbit Security
Swissbit Germany AG
Innere Wiener Str. 60
DE-81667 Munich
Germany
Tel. +49 89 12 22 32 531
Fax + 49 89 12 22 32 549
security@swissbit.com
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Swissbit:
SLN08G64B3BB2SA-DCRT SLN02G72F1BK1MT-DCRT