Hermetically Sealed,
Low IF, Wide VCC,
Logic Gate Optocouplers
Technical Data
Features
• Dual Marked with Device
Part Number and DSCC
Standard Microcircuit
Drawing
• Manufactured and Tested on
a MIL-PRF-38534 Certified
Line
• QML-38534, Class H and K
• Four Hermetically Sealed
Package Configurations
• Performance Guaranteed
over -55°C to +125°C
• Wide VCC Range (4.5 to 20 V)
• 350 ns Maximum Propaga-
tion Delay
• CMR: > 10,000 V/µs Typical
• 1500 Vdc Withstand Test
Voltage
• Three State Output Available
• High Radiation Immunity
• HCPL-2200/31 Function
Compatibility
• Reliability Data Available
• Compatible with LSTTL,
TTL, and CMOS Logic
Applications
• Military and Space
• High Reliability Systems
• Transportation and Life
Critical Systems
• High Speed Line Receiver
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to
prevent damage and/or degradation which may be induced by ESD.
• Isolated Bus Driver (Single
Channel)
• Pulse Transformer
Replacement
• Ground Loop Elimination
• Harsh Industrial
Environments
• Computer-Peripheral
Interfaces
Description
These units are single, dual and
quad channel, hermetically sealed
optocouplers. The products are
capable of operation and storage
over the full military temperature
range and can be purchased as
either standard product or with
full MIL-PRF-38534 Class Level
H or K testing or from the
appropriate DSCC Drawing. All
devices are manufactured and
tested on a MIL-PRF-38534
certified line and are included in
the DSCC Qualified Manufac-
turers List QML-38534 for Hybrid
Microcircuits.
Each channel contains an AlGaAs
light emitting diode which is
optically coupled to an integrated
high gain photon detector. The
detector has a threshold with
hysteresis which provides differ-
ential mode noise immunity and
eliminates the potential for
output signal chatter. The
detector in the single channel
units has a tri-state output stage
Truth Tables
(Positive Logic)
Multichannel Devices
Input Output
On (H) H
Off (L) L
HCPL-520x*
5962-88768
HCPL-523x
HCPL-623x
HCPL-625x
5962-88769
*See matrix for available extensions.
Functional Diagram
Multiple Channel Devices
Available
VCC
VO
VE
GND
Single Channel DIP
Input Enable Output
On (H) H Z
Off (L) H Z
On (H) L H
Off (L) L L
A 0.1 µF bypass capacitor must be connected between VCC and GND pins.
2
Selection Guide–Package Styles and Lead Configuration Options
Package 8 Pin DIP 8 Pin DIP 16 Pin Flat Pack 20 Pad LCCC
Lead Style Through Hole Through Hole Unformed Leads Surface Mount
Channels 1 2 4 2
Common Channel None V
CC, GND V
CC, GND None
Wiring
Agilent Part # & Options
Commercial HCPL-5200 HCPL-5230 HCPL-6250 HCPL-6230
MIL-PRF-38534, Class H HCPL-5201 HCPL-5231 HCPL-6251 HCPL-6231
MIL-PRF-38534, Class K HCPL-520K HCPL-523K HCPL-625K HCPL-623K
Standard Lead Finish Gold Plate Gold Plate Gold Plate Soldered Pads
Solder Dipped Option #200 Option #200
Butt Cut/Gold Plate Option #100 Option #100
Gull Wing/Soldered Option #300 Option #300
Class H SMD Part #
Prescript for all below 5962- 5962- 5962- 5962-
Either Gold or Solder 8876801PX 8876901PX 8876903FX 88769022X
Gold Plate 8876801PC 8876901PC 8876903FC
Solder Dipped 8876801PA 8876901PA 88769022A
Butt Cut/Gold Plate 8876801YC 8876901YC
Butt Cut/Soldered 8876801YA 8876901YA
Gull Wing/Soldered 8876801XA 8876901XA
Class K SMD Part #
Prescript for all below 5962- 5962- 5962- 5962-
Either Gold or Solder 8876802KPX 8876904KPX 8876906KFX 8876905K2X
Gold Plate 8876802KPC 8876904KPC 8876906KFC
Solder Dipped 8876802KPA 8876904KPA 8876905K2A
Butt Cut/Gold Plate 8876802KYC 8876904KYC
Butt Cut/Soldered 8876802KYA 8876904KYA
Gull Wing/Soldered 8876802KXA 8876904KXA
which allows for direct connection
to data buses. The output is non-
inverting. The detector IC has an
internal shield that provides a
guaranteed common mode
transient immunity of up to
10,000 V/µs. Improved power
supply rejection eliminates the
need for special power supply
bypass precautions.
Package styles for these parts are
8 pin DIP through hole (case
outline P), 16 pin DIP flat pack
(case outline F), and leadless
ceramic chip carrier (case outline
2). Devices may be purchased
with a variety of lead bend and
plating options, see Selection
Guide Table for details. Standard
Microcircuit Drawing (SMD)
parts are available for each
package and lead style.
Because the same electrical die
(emitters and detectors) are used
for each channel of each device
listed in this data sheet, absolute
maximum ratings, recommended
operating conditions, electrical
specifications, and performance
characteristics shown in the
figures are identical for all parts.
Occasional exceptions exist due
to package variations and limita-
tions and are as noted. Addition-
ally, the same package assembly
processes and materials are used
in all devices. These similarities
give justification for the use of
data obtained from one part to
represent other part’s per-
formance for die related
reliability and certain limited
radiation test results.
3
Functional Diagrams
8 Pin DIP 8 Pin DIP 16 Pin Flat Pack 20 Pad LCCC
Through Hole Through Hole Unformed Leads Surface Mount
1 Channel 2 Channels 4 Channels 2 Channels
Note: Multichannel DIP and flat pack devices have common VCC and ground. Single channel DIP has an enable pin 6. LCCC (leadless
ceramic chip carrier) package has isolated channels with separate VCC and ground connections.
V
CC
7
5
6
8
V
O
V
E
GND
1
2
3
4
Outline Drawings
16 Pin Flat Pack, 4 Channels
V
CC
7
5
6
8
V
O1
GND
1
2
3
4
V
O2
8 Pin DIP Through Hole, 1 and 2 Channel20 Terminal LCCC Surface Mount, 2 Channels
5
7
6
8
12
10
11
9
GND
V
O4
V
O3
1
3
2
4
16
14
15
13
V
CC
V
O2
V
O1
GND
1
V
O2
19
20
2
3
V
O1
87
V
CC2
V
CC1
10
GND
2
15
13
12
8.13 (0.320)
MAX.
5.23
(0.206)
MAX.




2.29 (0.090)
MAX.
7.24 (0.285)
6.99 (0.275)
1.27 (0.050)
REF.
0.46 (0.018)
0.36 (0.014)
11.13 (0.438)
10.72 (0.422)
2.85 (0.112)
MAX.
0.89 (0.035)
0.69 (0.027)
0.31 (0.012)
0.23 (0.009)
0.88 (0.0345)
MIN.
9.02 (0.355)
8.76 (0.345)
NOTE: DIMENSIONS IN MILLIMETERS (INCHES).
8.70 (0.342)
9.10 (0.358)
4.95 (0.195)
5.21 (0.205)
1.78 (0.070)
2.03 (0.080) 1.02 (0.040) (3 PLCS)
4.95 (0.195)
5.21 (0.205)
8.70 (0.342)
9.10 (0.358)
1.78 (0.070)
2.03 (0.080)
0.51 (0.020)
0.64
(0.025)
(20 PLCS)
1.52 (0.060)
2.03 (0.080)
METALIZED
CASTILLATIONS (20 PLCS)
2.16 (0.085)
TERMINAL 1 IDENTIFIER
NOTE: DIMENSIONS IN MILLIMETERS (INCHES).
SOLDER THICKNESS 0.127 (0.005) MAX.
1.14 (0.045)
1.40 (0.055)




3.81 (0.150)
MIN.
4.32 (0.170)
MAX.
9.40 (0.370)
9.91 (0.390)
0.51 (0.020)
MAX.
2.29 (0.090)
2.79 (0.110)
0.51 (0.020)
MIN.
0.76 (0.030)
1.27 (0.050)
8.13 (0.320)
MAX.
7.36 (0.290)
7.87 (0.310)
0.20 (0.008)
0.33 (0.013)
7.16 (0.282)
7.57 (0.298)
NOTE: DIMENSIONS IN MILLIMETERS (INCHES).
4
Hermetic Optocoupler Options
Option Description
100 Surface mountable hermetic optocoupler with leads trimmed for butt joint assembly. This
option is available on commercial and hi-rel product in 8 pin DIP (see drawings below for
details).
200 Lead finish is solder dipped rather than gold plated. This option is available on commercial
and hi-rel product in 8 pin DIP. DSCC Drawing part numbers contain provisions for lead
finish. All leadless chip carrier devices are delivered with solder dipped terminals as a
standard feature.
300 Surface mountable hermetic optocoupler with leads cut and bent for gull wing assembly. This
option is available on commercial and hi-rel product in 8 pin DIP (see drawings below for
details). This option has solder dipped leads.
Leadless Device MarkingLeaded Device Marking
*QUALIFIED PARTS ONLY *QUALIFIED PARTS ONLY



1.14 (0.045)
1.40 (0.055)
4.32 (0.170)
MAX.
0.51 (0.020)
MAX.
2.29 (0.090)
2.79 (0.110)
0.51 (0.020)
MIN.
7.36 (0.290)
7.87 (0.310)
0.20 (0.008)
0.33 (0.013)
NOTE: DIMENSIONS IN MILLIMETERS (INCHES).
0.20 (0.008)
0.33 (0.013)


0.51 (0.020)
MIN.
4.57 (0.180)
MAX.
0.51 (0.020)
MAX.
2.29 (0.090)
2.79 (0.110)
1.40 (0.055)
1.65 (0.065) 9.65 (0.380)
9.91 (0.390)
5° MAX.
4.57 (0.180)
MAX.
NOTE: DIMENSIONS IN MILLIMETERS (INCHES).
COMPLIANCE INDICATOR,*
DATE CODE, SUFFIX (IF NEEDED)
A QYYWWZ
XXXXXX
XXXXXXX
XXX XXX
50434 COUNTRY OF MFR.
Agilent FSCN*
Agilent LOGO
DSCC SMD*
PIN ONE/
ESD IDENT
Agilent P/N
DSCC SMD*
COMPLIANCE INDICATOR,*
DATE CODE, SUFFIX (IF NEEDED)
A QYYWWZ
XXXXXX
XXXX
XXXXXX
XXX 50434 DSCC SMD*
Agilent FSCN*
Agilent LOGO
COUNTRY OF MFR.
Agilent P/N
PIN ONE/
ESD IDENT DSCC SMD*
5
Absolute Maximum Ratings
Storage Temperature Range, TS.................................. -65°C to +150°C
Operating Temperature, TA......................................... -55°C to +125°C
Case Temperature, TC................................................................ +170°C
Junction Temperature, TJ..........................................................+175°C
Lead Solder Temperature .............................................. 260°C for 10 s
Average Forward Curre, IF AVG (each channel) ............................. 8 mA
Peak Input Current, IF PK (each channel) ............................... 20 mA[1]
Reverse Input Voltage, VR (each channel) ....................................... 3 V
Supply Voltage ,VCC .............................................. 0.0 V min., 20 V max.
Average Output Current, IO (each channel) ................................. 15 mA
Output Voltage, VO (each channel) .................... 0.3 V min., 20 V max.
Package Power Dissipation, Pd (each channel) ......................... 200 mW
Single Channel Product Only
Tri-State Enable Voltage, VE............................... 0.3 V min., 20 V max.
8 Pin Ceramic DIP Single Channel Schematic
Recommended Operating Conditions
Parameter Symbol Min. Max. Units
Power Supply Voltage VCC 4.5 20 V
Input Current, High Level, IFH 28 mA
Each Channel
Input Voltage, Low Level, VFL 0 0.8 V
Each Channel
Fan Out (TTL Load) N 4
Each Channel
Single Channel Product Only
High Level Enable Voltage VEH 2.0 20 V
Low Level Enable Voltage VEL 0 0.8 V
Note enable pin 6. An external 0.01 µF to 0.1 µF bypass capacitor is recommended
between VCC and ground for each package type.
ESD Classification
(MIL-STD-883, Method 3015)
HCPL-5200/01/0K, HCPL-6230/31/3K ................................(), Class 1
HCPL-5230/31/3K, HCPL-6250/51/5K ............................ (Dot), Class 3
ANODE
CATHODE
6
Electrical Characteristics
TA = -55°C to +125°C, 4.5 V VCC 20 V, 2 mA IF(ON) 8 mA, 0 V VF(OFF) 0.8 V, unless otherwise
specified.
Group A[11] Limit
Parameter Sym. Test Conditions Subgroups Min. Typ.* Max. Units Fig. Notes
Logic Low Output Voltage V
OL IOL = 6.4 mA (4 TTL Loads) 1, 2, 3 0.5 V 1, 3 2
IOH = -2.6 mA 1, 2, 3 2.4 ** V
Logic High Output Voltage V
OH (**VOH = VCC - 2.1 V) 2, 3 2
IOH = -0.32 mA NA 3.1
Output Leakage Current IOHH VO = 5.5 V IF = 8 mA 1, 2, 3 100 µA2
(V
OUT > VCC)V
O
= 20 V VCC = 4.5 V 500
Single VCC = 5.5 V VF = 0 V 4.5 6
Channel VE = Don't Care
Logic Low VCC = 20 V 1, 2, 3 5.3 7.5
Supply ICCL
Current Dual VCC = 5.5 V 9.0 12 mA
Channel VF1 = VF2 = 0 V
VCC = 20 V 10.6 15
Quad VCC = 5.5 V VF1 = VF2 =1424
Channel VF3 = VF4 = 0 V
VCC = 20 V 17 30
Single VCC = 5.5 V IF = 8 mA 2.9 4.5
Channel VE = Don't Care 1, 2, 3
Logic High VCC = 20 V 3.3 6
Supply ICCH
Current Dual VCC = 5.5 V 5.8 9 mA
Channel IF1 =
VCC = 20 V IF2 = 8 mA 6.6 12
Quad VCC = 5.5 V IF1 = IF2 =918
Channel VF3 = VF4 = 8 mA
VCC = 20 V VF3 =1124
I
F4 = 8 mA
Logic Low Short Circuit VO = VCC = 5.5 V 20 mA
Output Current IOSL VF = 0 V 1, 2, 3 2, 3
VO = VCC = 20 V 35
Logic High Short Circuit VCC = 5.5 V IF = 8 mA -10 mA
Output Current IOSH VO = GND 1, 2, 3 2, 3
VCC = 20 V -25
Input Forward Voltage VFIF = 8 mA 1, 2, 3 1.0 1.3 1.8 V 4 2
Input Reverse BVRIR = 10 µA 1, 2, 3 3 V 2
Breakdown Voltage
Input-Output Insulation II-O VI-O = 1500 Vdc, t = 5s 1 1.0 µA 4, 5
Leakage Current RH = 45%, TA = 25°C
Logic High Common Mode |CMH
|I
F
= 2 mA, VCM = 50 VP-P 9, 10, 11 1000 10,000 V/µs 9 2, 6,
Transient Immunity 12
Logic Low Common Mode |CML
|I
F
= 0 mA, VCM = 50 VP-P 9, 10, 11 1000 10,000 V/µs 9 2, 6,
Transient Immunity 12
Propagation Delay Time tPHL 9, 10, 11 173 350 ns 5, 2, 7
to Logic Low 6
Propagation Delay Time tPLH 9, 10, 11 118 350 ns 5, 2, 7
to Logic High 6
IF3 =
7
Electrical Characteristics Single Channel Product Only
TA = -55°C to +125°C, 4.5 V VCC 20 V, 2 mA IF (ON) 8 mA, 0 V VF(OFF) 0.8 V, 2.0 V
VEH 20 V, 0 V VEL 0.8 V, unless otherwise specified.
Group A[11] Limits
Parameter Sym. Test Conditions Subgroups Min. Typ.* Max. Units Fig. Notes
High Impedance State IOZL VO = 0.4 V VEN = 2 V, 1, 2, 3 -20 µA
Output Current VF = 0 V
VO = 2.4 V 20 µA
IOZH VO = 5.5 V 1, 2, 3 100
VO = 20 V 500
Logic High Enable VEH 1, 2, 3 2.0 V
Voltage
Logic Low Enable VEL 1, 2, 3 0.8 V
Voltage
Logic High Enable VEN = 2.7 V 20 µA
IEH VEN = 5.5 V 1, 2, 3 100
VEN = 20 V 0.004 250
Logic Low Enable IEL VEN = 0.4 V 1, 2, 3 -0.32 mA
Current
VEN = 2 V,
IF = 8 mA
*All typical values are at VCC = 5 V, TA = 25°C, IF(ON) = 5 mA unless otherwise specified.
Typical Characteristics
All typical values are at TA = 25°C, VCC = 5 V, IF(ON) = 5 mA unless otherwise specified.
Parameter Symbol Typ. Units Test Conditions Fig. Notes
Input Current Hysteresis IHYS 0.07 mA VCC = 5 V 3 2
VF
Input Diode Temperature Coefficient –––– -1.25 mV/°CI
F
= 8 mA 2
TA
Resistance (Input-Output) RI-O 1013 VI-O = 500 Vdc 2, 8
Capacitance (Input-Output) CI-O 2.0 pF f = 1 MHz 2, 8
Input Capacitance CIN 20 pF VF = 0 V, f = 1 MHz 2, 10
Output Rise Time (10-90%) tr45 ns 5, 7 2
Output Fall Time (90-10%) tf10 ns 5, 7 2
Current
8
Notes:
1. Peak Forward Input Current pulse width < 50 µs at 1 KHz maximum repetition rate.
2. Each channel of a multichannel device.
3. Duration of output short circuit time not to exceed 10 ms.
4. All devices are considered two-terminal devices: measured between all input leads or terminals shorted together and all output leads
or terminals shorted together.
5. This is a momentary withstand test, not an operating condition.
6. CML is the maximum rate of rise of the common mode voltage that can be sustained with the output voltage in the logic low state (VO
< 0.8 V). CMH is the maximum rate of fall of the common mode voltage that can be sustained with the output voltage in the logic
high state (VO > 2.0 V).
7. tPHL propagation delay is measured from the 50% point on the leading edge of the input pulse to the 1.3 V point on the leading edge
of the output pulse. The tPLH propagation delay is measured from the 50% point on the trailing edge of the input pulse to the 1.3 V
point on the trailing edge of the output pulse.
8. Measured between each input pair shorted together and all output connections for that channel shorted together.
9. Measured between adjacent input pairs shorted together for each multichannel device.
10. Zero-bias capacitance measured between the LED anode and cathode.
11. Standard parts receive 100% testing at 25°C (Subgroups 1 and 9). SMD, Class H and Class K parts receive 100% testing at 25, 125,
and –55°C (Subgroups 1 and 9, 2 and 10, 3 and 11, respectively).
12. Parameters are tested as part of device initial characterization and after design and process changes. Parameters guaranteed to limits
specified for all lots not specifically tested.
Single Channel Product Only
Parameter Symbol Typ. Units Test Conditions Fig. Notes
Output Enable Time to Logic High tPZH 30 ns 8
Output Enable Time to Logic Low tPZL 30 ns 8
Output Disable Time from Logic High tPHZ 45 ns 8
Output Disable Time from Logic Low tPLZ 55 ns 8
Dual and Quad Channel Products Only
RH = 45%, TA = 25°C,
Input-Input Insulation Leakage Current II-I 0.5 nA VI-I = 500 V, t = 5 s 9
Resistance (Input-Input) RI-I 1013 VI-I = 500 V 9
Capacitance (Input-Input) CI-I 1.5 pF f = 1 MH 9
Typical Characteristics (cont’d.)
All typical values are at T
A = 25°C, VCC = 5 V, IF(ON) = 5 mA, unless otherwise specified.
Figure 1. Typical Logic Low Output
Voltage vs. Temperature. Figure 2. Typical Logic High Output
Current vs. Temperature.
9
Figure 6. Typical Propagation Delay
vs. Temperature. Figure 7. Typical Rise, Fall Time vs.
Temperature.
Figure 3. Output Voltage vs. Forward
Input Current. Figure 4. Typical Diode Input Forward
Characteristic.
GND
V
CC
I
F
5 V
D.U.T.
619
INPUT
MONITORING
NODE
PULSE GEN.
t
r
= t
f =
5 ns
t = 100 kHz
10 % DUTY
CYCLE
C
L
=
15 pF
THE PROBE AND JIG CAPACITANCES
ARE INCLUDED IN C
L.
V
O
V
E
OUTPUT V
O
MONITORING
NODE
V
CC
R
f
D
1
D
2
5 K D
3
D
4
Figure 5. Test Circuit for tPLH, tPHL, tr, and tf.
10
V
FF
GND
V
CC
V
CM
+–
PULSE GEN.
A
D.U.T.
R
IN
V
O
V
E
OUTPUT V
O
MONITORING
NODE
V
CC
0.1 µF
BYPASS
B
GND
V
CC
I
F
+5 V
D.U.T.
619
PULSE
GENERATOR
Z
O
= 50
t
r
= t
f =
5 ns
C
L
C
L= 15 pF INCLUDING PROBE
AND JIG CAPACITANCE.
V
O
V
E
INPUT V
O
MONITORING
NODE
V
CC
D
1
D
2
5 KD
3
D
4
S2
S1
V
O
D1-4 ARE 1N916 OR 1N3064
Figure 10. LSTTL to CMOS Interface Circuit. Figure 11. Recommended LED Drive Circuit.
GND
VCC
D.U.T.
RL
665
VCC1
(+5 V) VCC2
(4.5 TO 20 V)
CMOS
TOTEM
POLE
OUTPUT
GATE
VO
VE
DATA
OUTPUT
TTL OR
LSTTL
2
DATA
INPUT
1
VCC2
5 V
10 V
15 V
20 V
RL
1.1 K
2.37 K
3.83 K
5.11 K
GND
V
CC
D.U.T.
750
V
CC1
(+5 V)
TOTEM
POLE
OUTPUT
GATE
TTL OR
LSTTL
DATA
INPUT
Figure 9. Test Circuit for Common Mode Transient Immunity and Typical Waveforms.
Figure 8. Test Circuit for tPHZ, tPZH, tPLZ, and tPZL.
*SEE NOTE 6.
11
Figure 13. Recommended LSTTL to LSTTL Circuit.
Figure 14. Single Channel Operating Circuit for Burn-in and Steady State Life Tests.
GND
V
CC
V
E
D.U.T.*
*ALL CHANNELS TESTED SIMULTANEOUSLY.
CONDITIONS: I
F
= 8 mA
V
CC
+ 20 V
V
IN
+–
I
F
I
O
= -14 mA
0.01 µF
T
A
= +125 °C
1.90 V 100
I
O
1200
GND
V
CC
D.U.T.
619
V
CC1
(+5 V)
OPEN
COLLECTOR
GATE
TTL OR
LSTTL
DATA
INPUT
4.02 K
Figure 12. Series LED Drive with Open Collector Gate
(4.02 k Resistor Shunts IOH from the LED).
GND
V
CC
D.U.T.
665
V
CC1
(+5 V)
TOTEM
POLE
OUTPUT
GATE
TTL OR
LSTTL
DATA
INPUT
TTL OR
LSTTL
DATA
INPUT
665
TOTEM
POLE
OUTPUT
GATE 1
1
2
0.1
µF
DATA
OUTPUT
V
CC2
(+5 V)
DATA
OUTPUT
UP TO 16 LSTTL
LOADS
OR 4 TTL LOADS
UP TO 16 LSTTL
LOADS
OR 4 TTL LOADS
MIL-PRF-38534 Class H,
Class K, and DSCC SMD
Test Program
Agilent’s Hi-Rel Optocouplers are
in compliance with MIL-PRF-
38534 Classes H and K. Class H
and Class K devices are also in
compliance with DSCC drawings
5962-88768 and
5962-88769.
Testing consists of 100% screen-
ing and quality conformance
inspection to MIL-PRF-38534.
www.semiconductor.agilent.com
Data subject to change.
Copyright © 1999 Agilent Technologies, Inc.
Obsoletes 5967-6330E
5980-0280E (10/00)