SPI5842-H Semiconductor Photo Diode Features * Peak sensitivity wavelength matching with infrared LED(P=940nm) * 4.8mm x5.6mm side view package * Black colored visible light cut-off lens Application * Various kinds of remote control systems Outline Dimensions unit : mm 4.6~5.00 3.50~3.70 1.60~2.00 5.40~5.80 5.30~5.90 0.7 Max. 17.00 Min. 0.60 Max. 0.55 Max. 2.54 Typ. Pin Connections 1. Anode 2. Cathode KSD-O2T002-000 1 SPI5842-H Absolute Maximum Ratings Characteristic (Ta=25) Symbol Rating Unit Reverse voltage VR 70 V Power dissipation PD 170 mW Operating temperature range Topr -2070 Storage temperature range Tstg -2585 1 * Soldering temperature Tsol 260 for 10 seconds *1. Keep the distance more than 2.0mm from PCB to the bottom of LED package Electrical / Optical Characteristics Characteristic Symbol (Ta=25) Test Condition 2 Min Typ Max Unit Short circuit current ISC VR=5V, * Ee=6mW/ - 45 - uA Dark current ID VR=10V, Ee=0 - - 50 nA Capacitance CT VR=10V, f=1MHz - 10 - pF Photosensitivity spectral range P - - 940 - nm 1 - - 55 - deg Peak sensitivity wavelength Half angle /2 430 ~ 1,050 nm *2. Ee : Irradiance by infrared LED light source (P=940nm) KSD-O2T002-000 2 SPI5842-H Characteristic Diagrams Fig. 2 ID - Ta Dark Current ID [nA] Short Current ISC [uA] Fig. 1 ISC - Ee Light Source [mW/] Ambient Temperature Ta [] Fig. 4 ID - VR Capacitance [Pf] Dark Current ID [nA] Fig. 3 CT - VR Reverse Voltage [v] Relative Intensity [%] Reverse Voltage [v] SPI5842-H Reverse Voltage [v] Relative Luminous Intensity Iv [%] Wavelength [nm] KSD-O2T002-000 3 SPI5842-H The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-O2T002-000 4