LED LIGHT BARS & BAR GRAPH ARRAYS deep Chip - : Absolute Masimum / Electro -optical . p Part Now oe mittee Peak Ratings | Data(At [0mA Drawing iit Si : } Lith e i aus : os : pO coe ene nena Digit Size Common Caommoan : Wave ANA: Pd ' Peak Viiv) lv Typ. : : ae Color * Length | : lfima ; Per Seg.) No. Anode Cathode / APiom) nm) (mW) ifimA); Typ-iMax. (med) | BA-lORIUD Red 655 40.) 10} 40 | 200 | L7 | 20 14 I BA-l0HIUD | Bright Red 700 90; 50 | 15 50 | 21) 5.0 2.0 = 10BAR BA-10GIUD Green 568 30 | 100; 30 | 180 | 21 7 25 5.0 = GRAPH BA-10Y1UD Yellow 585 | 35 | 100} 30 | 150 | 20 | 25 45 f | | ARRAY A-01 J Hi-Eff Red am BA-10EIUD 635 45 | 100 | 30 | 150 | 19 | 25 5.0 ro Orange , BA-l0SIUD Super Red 660 20; 60 | 20 | 150 | 17 | 25 8.0 BASHSUD =s|_- Bright Rea | 700 | 90/ 50 | 15 | 50 | 21] a5! 20 BA-SGSUD | Green | 568 | 30 | 100} 30 | 150 far fas! 50 nm SBAR | - BA-SYSUD Yellow 585 | 35} 100 | 30 | 150 | 20) 25) 45 = |GRAPH }- = : A-02 aay | | ARRAY a Hi-Eff Red BA+5SESUD 635 45| 100} 30 |}. 150 | 49) 25 5.0 : oe : Orange ~ BA-SSBUD | Super Red | 660 | 20) 60 | 20.) 150 | 17] 25| a0 Remark: + The average luminous instensity is obtained by summing the iuminous intensity of each segment and devicing by total number of segments. > Above part numbers are all with black surface and white segment. For part numbers with other surfaces and segment color combinations, please check the selection guide(Part number syster). f-1.78(.700) 0.60(.020) a TT = 3 = a) wz 7.62(.300) PIN i[+ s Lense} pentaiol tones (MIN) COOOL vay ABCDEFGHI J I Ale eota veiaee. (B78) t 2 s4xe=22.n6(.00)1 (eae, tt Kl on 2.54x6=10.16(400 BA-10x1UD A= 1081UD SAx4=10.16(400) BA-Sx5UD 20 19 18.17 16 18 14 13 12.11 206 19.18 17 16 15 14 13.12 11 lo 88 7 8 HHH HEHEHE A 12 3 4 5 6 F 8 10 123 486 6 7 8 910 I NOTES: i. All Dimensions are in millimeters (inches). 2. Tolerance is +0.25mm (010) uniess otherwise specified 3. Specifications are subject to change without notice 4. NP: No Pin. 5. NC; No Connect. 75