2
MAX SWAY
(EITHER DIRECTION)
DO NOT
SCALE FROM
THIS PRINT
No. OF POSITIONS PER ROW
-02 THRU -50
BODY SPECIFICATION
-DH: DOUBLE HORIZONTAL
LEAD STYLE
-02: SURFACE MOUNT
OPTION
-TR: TAPE AND REEL PACKAGING
-A: ALIGNMENT PIN (USE CLP-XX-DH-A
BODIES MUST BE MODLED TO POSTION)
(AVAILABLE ON POSITIONS -04 THRU -05)
(SEE NOTE 7)
CLP-1XX-XX-X-DH-XX
PLATING
.030
REF
0.76 .060
REF
1.52
.135
REF
3.43
(NO OF POS x .05000[1.270]) + .017[0.43]±.008[0.20]
.025 0.64
.0420 1.07
.050 1.27
REF
(NO OF POS -2) x .050[1.27] REF
(NO OF POS -1) EQ SPACES @.0500[1.270] REF
"A"
"A"
'C'
02
04
CLP-XX-DH-X
.030
REF
0.76
.120
REF
3.05
.180
±.010
4.57
±0.25
(SEE NOTE 5)
.050
REF
1.27
90°
-
3°
+
1°
SECTION "A"-"A"
C-70-05-X
CRITICAL AREA
(SEE NOTE 6)
NON-CRITICAL AREA
(SEE NOTE 6)
C-70-04-X
C
SEE TABLE 1
'B'
BACK VIEW
.003
0.08
(SEE NOTE 8)
DETAIL 'B'
SCALE 8 : 1
(TAILS ONLY)
C
SEE TABLE 1
.003
0.08
(SEE NOTE 8)
DETAIL 'C'
SCALE 8 : 1
(TAILS ONLY)
C
SEE TABLE 1
-F: 3µ" FLASH SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
-L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
-FM: 3µ" FLASH SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
-LM: 10µ" LIGHT SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
INSULATOR: LCP, UL 94 VO, COLOR: BLACK
CONTACT: PHOS BRONZE
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [.3] 2
.XXX:
.005 [.13]
.XXXX:
.0020 [.051]
MATERIAL:
LOW PROFILE .050 X .050 DOUBLE ROW ASM
BY:
CLP-1XX-XX-X-DH-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
PURVIS
11-29-1995
2
1
SHEET SCALE: 4:1
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
NOTES:
1.
C
REPRESENTS A CRITICAL DIMENSION.
2. ALL DIMENSION TO BE SYMMETRICAL ABOUT CENTERLINE
WITHIN ±.002[.05] UNLESS OTHERWISE STATED.
3. POSITONS -05 THRU -50 ARE TO BE PACKAGED IN TUBES.
4. MIN CONTACT RETENTION FORCE: 1LB.
5. TAILS TO ARE TO BE SHEARED. MAX BURR, ORIENTED AWAY
FROM CUSTOMER'S P.C.B. ONLY, TO BE .0045[.114].
6. MAX CUT FLASH: .015 IN NON-CRITICAL AREAS; NO CUT
FLASH TO BE PRESENT IN CRITICAL AREAS AS SHOWN
7. MOLD STEEL CAPABLE OF -02 & -03 POSITION (-A OPTION),
BUT NOT ENG'G APPROVED.
8. FIRST AND LAST PIN OF EACH ROW TO BE FLUSH TO .003[0.08] BELOW BODY.
F:\DWG\MISC\MKTG\CLP-1XX-XX-X-DH-XX-MKT.SLDDRW
REVISION AB
.945 24.00
REF
.472 12.00
REF
POSITION 1
"B" "B"
USER DIRECTION OF UNREELING
-TR: TAPE & REEL VIEW
(SCALE 2:1)
WITH -A OPTION
PT-1-24-01-62
(TUBE USES (2) TP-12)
PACKAGING TUBE VIEW
(SCALE 6:1)
-DH NO OPTION
PT-1-24-02-37
(TUBE USES (2) TP-12)
SHEET OF
LOW PROFILE .050 X .050 DOUBLE ROW ASM
BY:
CLP-1XX-XX-X-DH-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
PURVIS
11-29-1995
2
2
SHEET SCALE: 4:1
F:\DWG\MISC\MKTG\CLP-1XX-XX-X-DH-XX-MKT.SLDDRW
REVISION AB
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
