Features
x Industry standard size
x Industry standard pinout
15.24 mm (0.6 in.) DIP leads on 2.54 mm (0.1 in.)
centers
x Choice of Colors
AlGaAs Red, High Eciency Red, Yellow, Green
x Excellent appearance
Evenly lighted segments
Mitered corners on segments
Gray package gives optimum contrast
±50° viewing angle
x Design exibility
Common anode or common cathode
Left and right hand decimal points
x Categorized for luminous intensity
Yellow and green categorized for color
Use of like categories yields a uniform display
x High light output
x High peak current
x Excellent for long digit string multiplexing intensity
and color selection option
See Intensity and Color Selected Displays Data Sheet
x Sunlight viewable AlGaAs
HDSP-390x Series
HDSP-420x Series
HDSP-860x Series
HDSP-N15x Series
Description
The 20 mm (0.8 inch) LED seven segment displays are
designed for viewing distances up to 10 metres (33 feet).
These devices use an industry standard size package and
pinout. All devices are available as either common anode
or common cathode.
Applications
These displays are ideal for most applications. Pin for pin
equivalent displays are also available in a low current
design. The low current displays are ideal for portable
applica tions. For additional information see the Low Cur-
rent Seven Segment Displays data sheet.
AlGaAs[1] HER Yellow Green Package
HDSP- HDSP- HDSP- HDSP- Description Drawing
N150 3900 Common Anode Left Hand Decimal A
N151 3901 4201 8601 Common Anode Right Hand Decimal B
N153 3903 4203 8603 Common Cathode Right Hand Decimal C
3905 Common Cathode Left Hand Decimal D
Notes:
1. These displays are recommended for high ambient light operation. Please refer to the HDSP-N10x AlGaAs data sheet for low current operation.
Devices
HDSP-390x Series
20 mm (0.8 inch) Seven Segment Displays
Data Sheet
2
Part Numbering System
Notes:
1. For codes not listed in the gure above, please refer to the respective datasheet or contact your nearest Avago
representative for details.
2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1 bin per tube
(exceptions may apply). Please refer to respective datasheet for specic bin limit information.
5082 - X X X X - X X X X X
HDSP- X X X X - X X X X X
Mechanical Options[1]
00: No Mechanical Option
Color Bin Options[1,2]
0: No Color Bin Limitation
Z: Color Bins 2- and 3+ Only (applicable for Yellow devices only)
Maximum Intensity Bin[1,2]
0: No Maximum Intensity Bin Limitation
Minimum Intensity Bin[1,2]
0: No Minimum Intensity Bin Limitation
Device Conguration/Color[1]
0: Common Anode
1: Common Anode
3: Common Cathode
Device Specic Conguration[1]
Refer to Respective Datasheet
Package[1]
N: 20 mm (0.8 inch) Single Digit Seven Segment Display
3
Package Dimensions
Internal Circuit Diagram
27.69 0.25
(1.090 0.010)
20.32
(0.800)
11.07
(0.436)
8
1
8
2
3
4
5
6
7
9
18
11
17
16
15
14
13
12
10
10.16
(0.400)
13.08
(0.515)
1.27
(0.050)
8.25
(0.325)
8.25
(0.325)
C
L
C
L
CHARACTER
PACKAGE
LHDP
NOTE 4
8.38 0.25
(0.330 0.010)
2.54 0.25
(0.100 0.010)
HDSP-39xx
XYY Z
SIDE VIEW
19.96
(0.786)MAX.
0.38 (0.015)
MIN.
15.24 0.25
(0.600 0.010)
6.1
(0.240) 1.02
(0.040)
0.51
(0.020)
5.08
(0.200)
FRONT VIEW A, D FRONT VIEW B, C
END VIEW
11.07
(0.436)
8
1
8
2
3
4
5
6
7
9
18
11
17
16
15
14
13
12
10
1.27
(0.050)
C
L
C
L
CHARACTER
PACKAGE
NOTE 4
RHDP
PINS 2 & 17
DATE CODE
LUMINOUS
INTENSITY
CATEGORY
COLOR
BIN
W
*
NOTES:
1. DIMENSIONS IN MILLIMETERS AND (INCHES).
2. ALL UNTOLERANCED DIMENSIONS ARE FOR REFERENCE ONLY.
3. REDUNDANT ANODES.
4. UNUSED dp POSITION.
5. SEE INTERNAL CIRCUIT DIAGRAM.
6. REDUNDANT CATHODES.
7. FOR HDSP-420x/-860x SERIES PRODUCT ONLY.
* THE SIDE VIEW OF PACKAGE
INDICATES COUNTRY OF ORIGIN.
PIN A B C D
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
NO PIN
CATHODE a
CATHODE f
ANODE[3]
CATHODE e
ANODE[3]
CATHODE dp
NO PIN
NO PIN
NO PIN
CATHODE d
ANODE[3]
CATHODE c
CATHODE g
CATHODE b
NO PIN
ANODE[3]
NO PIN
NO PIN
CATHODE a
CATHODE f
ANODE[3]
CATHODE e
ANODE[3]
NO CONNEC.
NO PIN
NO PIN
CATHODE dp
CATHODE d
ANODE[3]
CATHODE c
CATHODE g
CATHODE b
NO PIN
ANODE[3]
NO PIN
NO PIN
ANODE a
ANODE f
CATHODE[6]
ANODE e
CATHODE[6]
NO CONNEC.
NO PIN
NO PIN
ANODE dp
ANODE d
CATHODE[6]
ANODE c
ANODE g
ANODE b
NO PIN
CATHODE[6]
NO PIN
NO PIN
ANODE a
ANODE f
CATHODE[6]
ANODE e
CATHODE[6]
ANODE dp
NO PIN
NO PIN
NO PIN
ANODE d
CATHODE[6]
ANODE c
ANODE g
ANODE b
NO PIN
CATHODE[6]
NO PIN
FUNCTION
f
A
e
g
d
a
b
c
dp
2
3
4
5
6
7
8
9
1
17
16
15
14
13
12
11
10
18
f
B
e
g
d
a
b
c
dp
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
1
17
16
15
14
13
12
11
10
18
17
16
15
14
13
12
11
10
18
f
C
e
g
d
a
b
c
dp
2
3
4
5
6
7
8
9
1
17
16
15
14
13
12
11
10
18
f
D
e
g
d
a
b
c
dp
4
Absolute Maximum Ratings
AlGaAs Red HER Yellow Green
HDSP-N150 HDSP-3900 HDSP-420x HDSP-860x
Description Series Series Series Series Units
Average Power per Segment or DP 96 105 105 105 mW
Peak Forward Current per 160[1] 135[3] 135[3] 90[5] mA
Segment or DP
DC Forward Current per 40[2] 40[4] 40[4] 30[6] mA
Segment or DP
Operating Temperature Range –20 to +100 [7] –40 to +100 –40 to +100 °C
Storage Temperature Range –55 to +100 °C
Reverse Voltage per Segment or DP 3.0 V
Wave Soldering Temperature for
3 Seconds (1.60 mm [0.063 in.] 250 °C
below body)
Notes:
1. See Figure 2 to establish pulsed conditions.
2. Derate above 55°C at 0.8 mA/°C.
3. See Figure 7 to establish pulsed conditions.
4. Derate above 50°C at 0.73 mA/°C.
5. See Figure 8 to establish pulsed conditions.
6. Derate above 50°C at 0.54 mA/°C.
7. For operation below –20°C, contact your local Avago components sales oce or an authorized distributor.
5
Device
Series Parameter Symbol Min. Typ. Max. Units Test Conditions
Luminous Intensity/Segment[1,2,5] I
V 6.0 14.0 mcd IF = 20 mA
(Digit Average)
1.8 V IF = 20 mA
Forward Voltage/Segment or DP VF
HDSP- 2.0 3.0 V IF = 100 mA
N15x Peak Wavelength OPEAK 645 nm
Dominant Wavelength[3] Od 637 nm
Reverse Voltage/Segment or DP[4] V
R 3.0 15 V IR = 100 PA
Temperature Coecient of 'VF/°C -2 mV/°C
V
F/Segment or DP
Thermal Resistance LED RTJ-PIN 430 °C/W/
Junction-to-Pin Seg
AlGaAs Red
Electrical/Optical Characteristics at TA = 25°C
High Eciency Red
Device
Series Parameter Symbol Min. Typ. Max. Units Test Conditions
3350 7000 Pcd IF = 100 mA Peak:
Luminous Intensity/Segment[1,2] I
V 1 of 5 df
(Digit Average) 4800 Pcd IF = 20 mA
HDSP- Forward Voltage/Segment or DP VF 2.6 3.5 V IF = 100 mA
390x Peak Wavelength OPEAK 635 nm
Dominant Wavelength[3] Od 626 nm
Reverse Voltage/Segment or DP[4] V
R 3.0 25 V IR = 100 PA
Temperature Coecient of 'VF/°C -2 mV/°C
V
F/Segment or DP
Thermal Resistance LED RTJ-PIN 375 °C/W/
Junction-to-Pin Seg
6
Device
Series Parameter Symbol Min. Typ. Max. Units Test Conditions
2200 7000 Pcd IF = 100 mA Peak:
Luminous Intensity/Segment[1,2] I
V 1 of 5 df
(Digit Average)
3400 Pcd IF = 20 mA
Forward Voltage/Segment or DP VF 2.6 3.5 V IF = 100 mA
HDSP- Peak Wavelength OPEAK 583 nm
420x Dominant Wavelength[3,6] Od 581.5 586 592.5 nm
Reverse Voltage/Segment or DP[4] V
R 3.0 25.0 V IR = 100 PA
Temperature Coecient of 'VF/°C -2 mV/°C
V
F/Segment or DP
Thermal Resistance LED Junction- RTJ-PIN 375 °C/W/
to-Pin Seg
Yellow
Device
Series Parameter Symbol Min. Typ. Max. Units Test Conditions
680 1500 Pcd IF = 10 mA
Luminous Intensity/Segment[1,2] I
V
(Digit Average)` 1960 Pcd IF = 50 mA Peak:
1 of 5 df
Forward Voltage/Segment or DP VF 2.1 2.5 V IF = 10 mA
HDSP- Peak Wavelength OPEAK 566 nm
860x Dominant Wavelength[3,6] Od 571 577 nm
Reverse Voltage/Segment or DP[4] V
R 3.0 50.0 V IR = 100 PA
Temperature Coecient of 'VF/°C -2 mV/°C
V
F/Segment or DP
Thermal Resistance LED Junction- RTJ-PIN 375 °C/W/
to-Pin Seg
Green
Notes:
1. Case temperature of the device immediately prior to the intensity measurement is 25°C.
2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
3. The dominant wavelength, ld, is derived from the CIE chromaticity diagram and is that single wavelength which denes the color of the
device.
4. Typical specication for reference only. Do not exceed absolute maximum ratings.
5. For low current operation, the AlGaAs Red HDSP-N100 series displays are recommended. They are tested at 1 mA dc/segment and are pin for
pin compatible with the HDSP-N150 series.
6. The Yellow (HDSP-420x) and Green (HDSP-860x) displays are categorized for dominant wavelength. The category is designated by a number
adjacent to the luminous intensity category letter.
7
Figure 2. Maximum allowable DC current vs. ambient
temperature.
Figure 5. Relative eciency (luminous intensity per
unit current) vs. peak current.
Figure 4. Relative luminous intensity vs. DC forward
current.
Figure 3. Forward current vs. forward voltage.
Figure 1. Maximum allowed peak current vs. pulse duration – AlGaAs Red.
AlGaAs Red
45
20 40 70 80 9060503010
0
40
50
T
A
– AMBIENT TEMPERATURE – °C
35
30
25
20
15
10
5
100 110
I
DC
MAX – MAXIMUM DC CURRENT
PER SEGMENT – mA
AlGaAs RED
Rθ
J-A
= 525°C/W
180
0.5 1.5 3.0 3.5 4.02.52.01.00
0
160
200
V
F
– FORWARD CURRENT – V
140
120
100
80
60
40
20
4.5 5.0
I
F
– FORWARD CURRENT PER SEGMENT – mA
AlGaAs RED
Figure 5.
2.25
515 3035402520100
0
2.00
2.50
1.75
1.50
1.25
1.00
0.75
0.50
0.25
45 50
IF – FORWARD CURRENT PER SEGMENT – mA
RELATIVE LUMINOUS INTENSITY
(NORMALIZED TO 1 AT 20 mA)
AlGaAs RED
2 30 40 200
0.7
0.6
0.8
0.9
1.2
1.1
1.0
IPEAK – PEAK FORWARD CURRENT PER SEGMENT
10050205
4310
AlGaAs RED
μPEAK – RELATIVE EFFICIENCY
(NORMALIZED TO 1 AT 20 mA)

  

















!
"!
!
"!
!
8
 









,²)25:$5'&855(173(56(*0(17²P$
)
<7,61(71,6821,08/(9,7$/(5
'1$5(+52)$P7$27'(=,/$0521
1((5*52)$P7$:2//(<
*5((1
+(5$1'
<(//2:


    


7²$0%,(177(03(5$785(²&






 
$
,0$;²0$;,080'&&855(173(5
6(*0(17²P$
'&
+(5<(//2:
*5((1
5 &:
-$
θθ
θθ
 


 
W²38/6('85$7,21²6
3
'&
5$7,22)0$;,08023(5$7,1*3($.
&855(17727(03(5$785('(5$7('
0$;,080'&&855(17
,
3($.
,0$;
N+=
N+=
+=
23(5$7,21,1
7+,65(*,21
5(48,5(6
7(03(5$785(
'(5$7,1*
2),0$;
'&
'&23(5$7,21
W²38/6('85$7,21²6
3
  


,0$;
5$7,22)0$;,08023(5$7,1*3($.
&855(17727(03(5$785('(5$7('
0$;,080'&&855(17
,
3($.

'&
23(5$7,21,1
7+,65(*,21
5(48,5(6
7(03(5$785(
'(5$7,1*
2),0$;
'&
'&23(5$7,21
N+=
N+=
N+=
+=
+=
   






9²)25:$5'92/7$*(²9
)
*5((1
<(//2:

,²)25:$5'&855(173(56(*0(17²P$
)
+(5
<&1(,&
,))
(
(9,7
$/
(5
²
N
DHS
5
(+
5
2)
$P
7$27'(=
,/$0521
1(
(5*52)$P7$:2//(
<
'1$

    










 
,²3($.)25:$5'&855(17
3(56(*0(17²P$
3($.
 


*5((1
<(//2:
3($.
Ü
+(5
Figure 10. Relative luminous intensity vs. DC forward
current.
Figure 8. Maximum allowable DC current vs. ambient
temperature.
Figure 6. Maximum allowed peak current vs. pulse duration – HER, Yellow.
HER, Yellow, Green
Figure 7. Maximum allowed peak current vs. pulse duration – Green.
Figure 9. Forward current vs. forward voltage.
Figure 11. Relative eciency (luminous intensity
per unit current) vs. peak current.
Intensity Bin Limits (mcd)
AlGaAs Red
HDSP-N15x
IV Bin Category Min. Max.
J 6.14 11.20
K 9.20 16.90
L 13.80 25.30
M 20.70 38.00
N 31.10 56.90
O 46.60 85.40
Yellow
HDSP-420x
IV Bin Category Min. Max.
C 2.23 4.09
D 3.35 6.14
E 5.02 9.21
F 7.53 13.82
G 11.30 20.72
H 16.95 31.08
I 25.43 46.62
Green
HDSP-860x
IV Bin Category Min. Max.
D 1.03 1.88
E 1.54 2.82
F 2.31 4.25
G 3.47 6.37
H 5.21 9.55
HER
HDSP-390x
IV Bin Category Min. Max.
D 3.35 6.14
E 5.02 9.21
F 7.53 13.82
G 11.30 20.72
H 16.95 31.08
I 25.43 46.62
Note:
All categories are established for classication of products. Products
may not be available in all categories. Please contact your Avago
representatives for further clarication/information.
Contrast Enhancement
For information on contrast enhancement, please see
Application Note 1015.
Soldering/Cleaning
Cleaning agents from the ketone family (acetone, methyl
ethyl ketone, etc.) and from the chlorinated hydrocarbon
family (methylene chloride, trichloro- ethylene, carbon
tetrachloride, etc.) are not recommended for cleaning
LED parts. All of these various solvents attack or dissolve
the encapsulating epoxies used to form the package of
plastic LED parts.
For information on soldering LEDs, please refer to Appli-
cation Note 1027.
Color Categories
Dominant Wavelength (nm)
Color Bin Min. Max.
Yellow 1 581.50 585.00
3 584.00 587.50
2 586.50 590.00
4 589.00 592.50
Green 2 573.00 577.00
3 570.00 574.00
4 567.00 571.00
5 564.00 568.00
For product information and a complete list of distributors, please go to our website: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2011 Avago Technologies. All rights reserved. Obsoletes 5988-1737EN
AV02-2551EN - January 27, 2011