www.osram-os.com Produktdatenblatt | Version 1.1 SFH 203 PFA SFH 203 PFA Radial T1 3/4 Silicon PIN Photodiode Applications ----Electronic Equipment ----Smoke Detectors ----Highbay Industrial ----White Goods ----Industrial Automation (Machine controls, Light barriers, Vision controls) Features: ----Package: black epoxy ----ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) ----Wavelength range (S10%) 750 nm to 1100 nm ----Short switching time (typ. 5 ns) ----5 mm LED plastic package Ordering Information Photocurrent Photocurrent Ordering Code typ. Ee=1mW/cm; =870nm; VR=5V Ee=1mW/cm; =870nm; VR=5V IP IP SFH 203 PFA 3.6 A Type 1 Version 1.3 | 2018-05-04 6.2 A Q62702P0947 SFH 203 PFA Maximum Ratings TA=25C Parameter Symbol Operating Temperature Top min. max. -40 C 100 C Storage temperature Tstg min. max. -40 C 100 C Reverse voltage VR max. 20 V Reverse voltage t2min VR max. 50 V Total power dissipation Ptot max. 150 mW ESD withstand voltage acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) VESD 2 Version 1.3 | 2018-05-04 Values 2 kV SFH 203 PFA Characteristics TA=25C Parameter Symbol Wavelength of max sensitivity S max typ. 900 nm Spectral range of sensitivity 10% typ. 750...1100 nm Radiant sensitive area A typ. 1.00 mm Dimensions of active chip area LxW typ. 1x1 mmxmm Half angle typ. 75 Dark current VR=20V IR typ. max. 1 nA 5 nA Spectral sensitivity of the chip =850nm S typ. 0.62 A / W Quantum yield of the chip =850nm typ. 0.90 Electrons / Photon Open-circuit voltage Ee=0.5mW/cm; =870nm VO min. typ. 250 mV 300 mV Short-circuit current Ee=0.5mW/cm; =870nm ISC typ. 3 A Rise time VR=20V; RL=50; =850nm tr typ. 0.005 s Fall time VR=20V; RL=50; =850nm tf typ. 0.005 s Forward voltage IF=100mA; E=0 VF typ. 1.3 V C0 typ. 11 pF Temperature coefficient of voltage =870nm TCV typ. -2.6 mV / K Temperature coefficient of short-circuit current =870nm TCI typ. 0.1 % / K Noise equivalent power VR=20V; =850nm NEP typ. 0.029 pW / Hz1/2 Detection limit VR=20V; =850nm D* typ. 3.5e12 cm x Hz1/2 / W Capacitance VR=0V; f=1MHz; E=0 3 Version 1.3 | 2018-05-04 Values SFH 203 PFA Relative Spectral Sensitivity 1), 2) Srel=f() OHF01773 100 S rel % 80 60 40 20 0 400 Directional Characteristics Srel=f() 4 Version 1.3 | 2018-05-04 1), 2) 600 800 1000 nm 1200 SFH 203 PFA Photocurrent/Open-Circuit Voltage IP (VR=5V)/VO=f(Ee) P OHF01765 10 1 10 4 mV 10 3 VO 10 0 10 2 P 10 -1 10 1 10 1 Capacitance 10 2 Dark Current IR=f(VR) ; E=0 10 2 A 10 -2 10 0 1), 2) W/cm 1), 2) C=f(VR); f=1MHz; E=0; 5 Version 1.3 | 2018-05-04 2 Ee 10 0 10 4 VO 1), 2) SFH 203 PFA Dark Current 2) IR=f(TA); E=0; VR=20V Power Consumption Ptot=f(TA); OHF00394 160 mW Ptot 140 120 100 80 60 40 20 0 20 40 60 0 6 Version 1.3 | 2018-05-04 80 C 100 TA SFH 203 PFA 3) 2.54 (0.100) spacing 0.6 (0.024) 0.4 (0.016) 0.8 (0.031) 0.4 (0.016) Area not flat 1.8 (0.071) 1.2 (0.047) 29 (1.142) 27 (1.063) Cathode Approximate Weight: 268.0 mg Package marking: Cathode 7 Version 1.3 | 2018-05-04 1.0 (0.039) 0.5 (0.020) o5.1 (0.201) o4.8 (0.189) Dimensional Drawing 3.85 (0.152) 3.35 (0.132) 5.0 (0.197) 4.2 (0.165) Chip position 5.9 (0.232) 5.5 (0.217) 0.6 (0.024) 0.4 (0.016) GEOY6648 SFH 203 PFA Recommended Solder Pad Pad 1: anode 8 Version 1.3 | 2018-05-04 3) SFH 203 PFA TTW Soldering IEC-61760-1 TTW OHA04645 300 10 s max., max. contact time 5 s per wave C T 250 235 C - 260 C First wave Second wave Continuous line: typical process Dotted line: process limits T < 150 K 200 Cooling Preheating ca. 3.5 K/s typical 150 ca. 2 K/s 130 C 120 C 100 C 100 ca. 5 K/s Typical 50 0 0 20 40 60 80 100 120 140 160 180 200 220 s 240 t 9 Version 1.3 | 2018-05-04 SFH 203 PFA Notes The evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of lamps and lamp systems). Within the risk grouping system of this IEC standard, the LED specified in this data sheet fall into the class exempt group (exposure time 10000 s). Under real circumstances (for exposure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. When looking at bright light sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoyance, visual impairment, and even accidents, depending on the situation. Packing information is available on the internet (online product catalog). For further application related informations please visit www.osram-os.com/appnotes 10 Version 1.3 | 2018-05-04 SFH 203 PFA Disclaimer Disclaimer Language english will prevail in case of any discrepancies or deviations between the two language wordings. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the OSRAM OS Webside. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Product safety devices/applications or medical devices/applications OSRAM OS components are not developed, constructed or tested for the application as safety relevant component or for the application in medical devices. In case Buyer - or Customer supplied by Buyer- considers using OSRAM OS components in product safety devices/applications or medical devices/applications, Buyer and/or Customer has to inform the local sales partner of OSRAM OS immediately and OSRAM OS and Buyer and /or Customer will analyze and coordinate the customer-specific request between OSRAM OS and Buyer and/or Customer. 11 Version 1.3 | 2018-05-04 SFH 203 PFA Glossary 1) Testing temperature:TA = 25C 2) Typical Values:Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 3) Tolerance of Measure:Unless otherwise noted in drawing, tolerances are specified with 0.1 and dimensions are specified in mm. 12 Version 1.3 | 2018-05-04 SFH 203 PFA Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 13 Version 1.3 | 2018-05-04