HITANO ENTERPRISE CORP. RS1A THRU RS1M TECHNICAL SPECIFICATIONS OF SURFACE MOUNT FAST RECOVERY RECTIFIER VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 1.0 Ampere FEATURES * ldeal for surface mounted applications * Low leakage current * Opened junction SMA ( DO-214AC ) .062(1.60) .055(1.40) MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V- 0 rate flame retardant *Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 * Polarity: As marked * Mounting position: Any * Weight: 0.064 gram .114(2.90) .098(2.50) .181(4.60) .157(4.00) .096(2.44) .078(2.00) .060(1.52) .030(.76) .008(0.203) .002(0.051) .208(5.28) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS .188(4.80) o Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. Dimensions in inches and (millimeters) For capacitive load, derate current by 20%. Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T A = 55o C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum Forward Voltage at 1.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage Maximum Reverse Recovery Time (Note 3) Maximum Thermal Resistance (Note 2) Typical Junction Capacitance (Note 1) Operating and Storage Temperature Range SYMBOL VRRM RS1A 50 V RMS 35 70 VDC 50 100 RS1B 100 o @TA = 125 C RS1 1000 UNITS Volts RS1G 400 RS1J 600 RS1K 800 140 280 420 560 700 Volts 200 400 600 800 1000 Volts IO 1.0 Amps I FSM 30 Amps VF 1.3 5.0 Volts o @T A = 25 C RS1D 200 IR trr RJL CJ T J , T STG NOTES : 1. Measured at 1.0 MHz and applied reverse voltage of 4.0VDC 2. Thermal Resistance (Junction to Ambient), .24in2 (6.0mm 2 ) copper pads to each terminal. 3. Test Conditions: IF = 0.5A, IR = 1.0A, IRR = 0.25A uAmps 150 150 250 30 15 -65 to + 175 500 nSec 0 C/W pF 0 C RATING AND CHARACTERISTIC CURVES ( RS1A THRU RS1M )