The M21260 is part of a family of low-power, high-perform-
ance video devices for broadcast and professional video
applications. In addition to the 4x4 crosspoint with inde-
pendent quad channel video reclockers, other video
products include:
- M21250, M21251, M21252 quad channel reclockers
for SD, SD/HD, and SD/HD/2xHD data rates
- M21261 1:4 1.6 Gbps video fanout with SD/HD
multi-rate reclocking
- M21262 4:1 1.6 Gbps video selector with SD/HD
multi-rate reclocker
The M21260 provides all of the features and benefits of
the M21251 quad channel SD/HD reclocker and incorporates
a fully non-blocking 4x4 asynchronous crosspoint switch
before the reclocker stages.
Reduced power dissipation with improved jitter generation,
tolerance, and transfer enable robust system design at
reduced cost and simplified thermal management. System
and chip level BIST functionality enables improved manufac-
turing (JTAG) and system level troubleshooting and diagnostics
(test pattern generators – PRBS, 8b/10b)
M21260
>
4x4 1.6 Gbps Crosspoint with Quad Channel Multi-rate Video
Reclockers for SD/HD (42 Mbps to 1.6 Gbps) Applications
>Integrated 4x4 crosspoint
switch for data rates to 1.6
Gbps with a fully non-blocking
architecture and broadcast /
multicast functionality
>Fully independent, quad channel
multi-rate video reclockers,
SMPTE and DVB-ASI compliant
- Hardwired control mode:
143, 177, 270, 360, 540,
1483.5/1485 Mbps
- Software control mode:
42 Mbps – 1.6 Gbps
- Bypass mode: 0 – 1.6 Gbps
>Integrated signal conditioning
for improved signal integrity
with inexpensive PCB materials
or longer PCB trace lengths.
>Very low power dissipation and
flexible power supply support
for reduced power supply and
thermal management costs
>Superior jitter generation
(5mUI typical) and improved
jitter tolerance in the high
frequency band
>Integrated loop filter compo-
nents and I/O termination
resistors for simplified PCB
designs and reduced cost
>Flexible I/O interfacing to CML,
LVDS, and LVPECL with per
channel output amplitude control
>Serial SPI 4 wire interface or
hardwired interface control
>BIST features for PCB and
system testing with fully
independent transmitter
and receiver
- PRBS: 2
7
–1,2
15
–1,
2
23
–1,2
31
–1
- 8b/10b: CJTPAT, CRPAT,
countdown
>PCB layout friendly with “pass
through” I/O and high speed
output polarity inversion
>KEY FEATURES
Input
Equalizer
Pre-Emphasis
PRBS 2^23-1
1.6 Gbps
Input Signal
after 60”
FR4 Trace
PRBS 2^23-1
1.6 Gbps
Output Signal
after 60”
FR4 Trace
Input Equalizer OFF
Pre-Emphasis OFF
Input Equalizer ON
Pre-Emphasis ON