BRUSHLESS DC geared motors All-metal gearbox, with ball bearing on output shaft Speed range : 1.5 to 806 rpm Torque rating : 0.3 to 5 Nm depending on reduction ratio Associated Brushless motor : 30 watts max. 1 Types OPTIONS : on request 80 035 5 80 035 5 24 V 24 V 2 Nominal voltage - - - - - Special reduction ratio Special greasing Shaft adaptation Stainless steel shaft option Motor : see page 1/55 Gearbox output speeds (rpm) 3 Part numbers Without speed regulation With speed regulation 10% 100% of speed (rpm) 81 to 806 51 to 504 45 to 444 28 to 278 23 to 222 14 to 139 9 to 89 7 to 69 6 to 56 3 to 28 1.5 to 14 Ratios 4.22 6.75 7.66 12.25 15.31 24.5 38.28 49 61.25 122.5 245 80 035 501 80 035 508 80 035 502 80 035 509 80 035 503 80 035 504 80 035 510 80 035 511 80 035 505 80 035 512 General characteristics Nm daN daN W C g Dimensions 80 030 81 035 5 80 030 81 035 5 5 6 6 24 58 1300 5 6 6 24 58 1300 Curve : nominal torque/speed The unbroken line represents the maximum operating ranges for the geared motors in continuous operation. 21,4 min. 22,7max. 0,1 56 0,15 65,1 max. 10 57 1 2 3 4 5 6 7 8 0,1 -0 N.m 16 0,05 7 0,1 0,1 O 8 - 0,022 200 17,5 10 15 3,5 56 0,15 65,1 max. 4 fixing holes O 4.2 13 1 Motor Gearbox Maximum permitted gearbox torque in steady state Axial load (dynamic) Radial load (dynamic) Nominal usable power Casing temperature Weight 1 44,8 max. 118 max. 0,1 1 rpm 10 To order, specify : Standard products 3 Part number Example : Brushless DC geared motor - 80 035 502 Standard products, non stocked 1 Type 2 Nominal voltage 3 Output speed Example : BRUSHLESS DC geared motor - 80 035 5 - 24 V - With speed regulation 222 rpm. 1/56 100 1000 10000