WOW!
World of Weller®
Catalogue
www.labem.pl
3
Knives, Cutters, Screwdrivers, Kits, etc.
Tweezers, Cutters, Pliers, EROP,
Stripping Tools, Kits, etc.
Soldering, Microtools, Desoldering, Hot Air,
Rework, Fume Extraction, Electronic Screwdrivers,
Dispensing Systems, Accessories, etc.
Page 334 – Page 351
Page 230 – Page 333
Page 06 – Page 229
Subject to technical change without notice.
Liability for errors, misprints and omissions excluded.
www.labem.pl
4
Content
General Information 6 – 11
Weller - Trusted Technology 6 – 7
Heating Element Technology 8 – 9
Selection Tool for Soldering irons 10 – 11
Why Fume Extraction ? 98 – 99
Solutions for Fume Extraction – For clean air 100 – 101
Recommended treatment of Soldering Tips 160 – 161
Soldering Stations 12 – 43
WX Soldering Stations (Overview page 12 – 14) 12 – 19
Soldering Station (Overview page 20 – 22) 20 – 31
Special Applications
- For use with solder robots 32 – 35
- For use with inert gas 36 – 37
- Solder Feeder Systems 38 – 39
- Mobile Soldering 40 – 43
Rework 44 – 53
Soldering, Desoldering and Hot Air (Overview page 44 – 47)
Soldering and Desoldering Stations (Overview page 54 – 57) 54 – 61
Hot Air Stations (Overview page 62 – 65) 62 – 73
BGA/QFP Repair 74 – 83
Accessories 84 – 97
Temperature Measuring and Calibration 84 – 85
Preheating Plates 86 – 87
PCB Board Holders 88 – 89
Soldering Bathes 90
Thermal Stripping Tools 91
Manual Desoldering Pumps 92
Vacuum Pen / Solder Dispenser 93
Accessories Cleaning Tools 94 – 97
Weller Overview Safety Rests 138 – 139
Fume Extraction (General Information page 98 – 101) 98 – 137
Volume Extraction (Overview page 102 – 103) 104 – 111
Accessories 112 – 117
Accessories Installation 118 – 121
Accessories Filter 122 – 124
Pipe System 75 125
Tip Extraction (Overview page 126–127) 126 – 137
Accessories 130 – 137
Soldering
Desoldering
Hot Air
Repair
Rework
Fume Extraction
Accessories
www.labem.pl
5
Accessories Filter 132 – 133
Pipe System 50 133
Accessories Installation 134 – 135
Safety Rests 136 – 137
Soldering / Desoldering / Hot Air Irons 138 – 159
Soldering iron with different heating technologies
Active Tip 140 – 141
Fast Response 142 – 145
Silver Line 146 – 149
Magnastat Soldering Irons 150 – 151
Unregulated Line Voltage Soldering Irons 152 – 153
Desoldering Irons and Tweezers 154 – 157
Hot Air Irons 158 – 159
Soldering Tips 160 – 205
Soldering Tips (Overview page 162 – 163) 164 – 193
Nozzles (Overview page 162 – 163) 194 – 197
Hot Air Nozzles (Overview page 162 – 163) 198 – 204
Electric Screwdrivers (Overview page 208 – 209) 206 – 221
Control Unit 210
Electric Screwdriver 211
Accessories 212 – 213
Bits and Knives 214 – 220
Dispensers (Overview page 212 – 213) 222 – 229
Dispensers 222 – 224
Wands 225
Accessories / Needles 226 – 299
Erem (Index page 220) 230 – 333
Xcelite 334 – 351
Exploded Drawings 352 – 385
Index
Numerical Index 386 – 391
Alpha Numerical Index 392 – 396
Soldering Tips
Soldering Irons
Electric
Screwdrivers
Dispensing
Systems
EREM
Xcelite
Fume Extraction
www.labem.pl
6
ESD
1960 70 80 90 00 10 Year
Energy saving
60 W
7 W
Energy Efficient, Professional Soldering Stations
Development of the magnastat soldering iron,
the first temperature controlled soldering iron
First analog controlled soldering station
First digital controlled soldering station
Launch of stand-by and auto-off mode in soldering systems
First intelligent soldering tools with increased energy efficiency
Cutting edge mechanical & electronic parts
Fast reaction & recovery time
Automatic tool recognition &
downloading of parameters
Micro processor controlled PID control
Exact temperature settings per one degree
No calibration needed for Weller soldering
units
Quality Built to
Guarantee Quality
Weller soldering stations do not need to be calibrated: the parts of the Weller heating element
which determine the temperature have the same physical material characteristics and do not
change over time or during use.
Electronic control units do not wear out. Closed loop temperature regulation & high quality sensor
& control technology assure temperature stability of the soldering tool during its lifetime.
Built according to IPC J-STD001 D and DIN EN 61191-1.
If higher accuracy than these standards is required, fine adjustment is possible.
All indsutry and military ESD standards are met.
High Productivity - No Calibration Required
Weller - Time Tested & Trusted Technology
www.labem.pl
7
d
c
b
a
SolderingSoldering
All Weller soldering stations are equipped
with various possibilities for potential equalization:
a) Hard ground without plug (original delivery)
b) Potential equalization with plug - equalization line
on center contact
c) Potential free - with plug
d) Soft ground - with plug and resistor soldered in:
Grounding according to selected resistor
Safety First with
Maximum Flexibility
- In a League of Their Own
www.labem.pl
8
RT LT XT
8
XNT
Heating Element Technology
Required
Heat Demand
The soldering tip transfers
the heat to the solder joint.
Soldering iron
Heating Technologies
deliver precise
POWER
on
DEMAND!
Three Tip Technologies
Solder pad size & joint mass
Soldering Application
Active-Tip
Power-Response
Silver-Line
Power-Response
www.labem.pl
9
RT / RTW
XNT
XT / XHT
LT
Soldering
Most delicate & temp- sensitive applications; for use un-
der microscope; ultra fine tips with fastest heat response
& best temp-control; cartridge tips
SMDs & THTs with very small solder pads & increased
heat demand; perfect choice where Active-Tip above
lacks sufficient power; lower cost, non-cartridge tips.
Most difficult, high mass soldering jobs; maximum power
with ergonomic iron handle; choose when WXP/ WP 65
lack sufficient power; lower cost, non-cartridge tips.
Universal SMD & THT applications both small & large;
low mass silver tips offer absolute best heat transfer at
lowest price in entire tip range; non-cartridge tips
Active-Tip Technology
Power-Response Technology
Power-Response Technology
Silver-Line Technology
Three Tip Technologies designed to
master ALL soldering jobs - from the
most delicate to the most diffcult!
www.labem.pl
10
WXP 65
WP 65
WSP 80
WP 80
WXP 120
WP 120
WXP 200
WP 200
XNT
LT
XT XHT
+
+
-
-
+
+
-
-
Active-Tip
Power-Response
Power-Response
Silver-Line
+
+
-
-
+
+
-
-
WXMT
WMRT RT
RTW
HS
XNT
HS
LT
XT
XHT
WXMP
WMRP
RT RTW
Selection Tool for Soldering irons
Soldering tips
Soldering tips
Soldering tips
Soldering tips
Soldering tips
Soldering tips
Ultra slim soldering iron;
Ideal for microscope work.
SMDs & THTs with very small solder
pads & increased heat demand.
Universal SMD & THT applications both
small & large heat demand.
.
All-rounder with great heating power;
soldering applications from small to
large components with higher heat
demand required.
Slim tweezers. Ideal for soldering
and desoldering of very small
SMD components.
Highest Power soldering iron;
ideal for applications with highest mass
applications e.g. LED back-panels or RF
shieldings.
Weller heating & tip technologies are designed for
specific applications guaranteeing maximum flexibility!
Solder pad size
Fast, intensive
heat requirement
Solder pad size
Fast, intensive
heat requirement
Solder pad size
Fast, intensive
heat requirement
Fast,
intensive
heat
requirement
Solder pad size
2 x 40 W, 12 V
200 W, 24 V
40 W (55 W with RT 11), 12 V
65 W, 24 V
80 W, 24 V
120 W, 24 V
www.labem.pl
11
°C
50°
0 2 4 6 8 10 12 14 16 18 20 SEC.
150°
250°
350°
°C
100°
50°
150°
200°
250°
300°
350°
WP 80
14 sec.
WP 120
WP 80
0 20 40 60 80 100 120 140 160 180 SEC.
°C
400°
300°
200°
100°
Soldering
Weller heating & tip technologies are designed for
specific applications guaranteeing maximum flexibility!
■Maximum power & rapid response
■Optimized sensor position
■Meeting highest industry standards
■Widest tip range with low price point
■Effective heat transfer via silver core
■Fast ramp up & recovery
■Designed for universal applications
■Low mass tips with lowest price point
■Fastest heat up & recovery on the market
■Excellent reaction time with finest tips
■Optimal for soldering under microscope
■Rapid hot tip-change; no tool required
The Manufacturer Warranty can ONLY be
guaranteed when using original Weller parts.
Ready for soldering
in ONLY 3 sec.
30 % faster
65W up to 200W
Capacity comparison
Heating time
Standard
soldering
iron
45–55 sec.
Active-Tip Technology
This highly innovative technology offers ultra precise hea-
ting & temperature control specifically designed for micro-
soldering applications. The fully integrated tip cartridge
(40W ) delivers the fastest recovery on the market for fine
tips at just a slightly higher tip price. Temperature sensitive
and miniature applications are mastered with precision &
safety.
Power-Response Technology
The newly improved technology maximizes soldering performance
on the smallest to the largest joints. A perfect balance between
power (65W, 120W & 200W), response, temperature
control and lower tip costs makes this unique technology the most
attractive solution - Top quality professional soldering
designed to meet the highest industry standards.
Silver-Line Technology
The low mass silver tips offer the absolute best heat transfer at
the lowest price in our entire range of tips. The 80W ergono-
mically designed heating element and pencil type grip make
this technology the top performer for universal soldering
applications where tip price is a deciding factor.
www.labem.pl
ESD
12
Soldering Stations
Easy monitoring of entire workplace - WX station
acts as the digital controller for all units
RS232 connection cable for controlling the pre-hea-
ting plate and the fume extraction units
Digital and optical decoupled interface for SPS
(e.g. robot applications)
USB interface
Only 1 Controll Unit per Workbench
Hard to believe, but TRUE: This Weller workbench solution will save as
much power as a single-person household uses in a whole year!
Highly Efficient Benchtop Soldering Solutions
The all-in-one professional soldering and energy-saving solution includes the new WX 2 dual-
channel soldering station complete with WXP 65 intelligent soldering iron, the Zero Smog 4V
solder fume extractor and a WHP series preheating plate. Compared to a conventional repair
workstation, it is possible to save up to *1800 kWh per year.
The WX 2 acts as a central control unit for the entire benchtop: the intelligent soldering irons,
solder fume extractor and the preheating plate. When the soldering iron is not in use, the WX
2 switches all connected devices to Stand-by or Auto-off mode thereby
significantly reducing energy costs.
*Savings based on customer experience with a WeIler soldering system is in use on average for one hour per day for 220 workdays per year.
www.labem.pl
13
Weller Fume Extraction Systems protect operators
from unhealthy fine particles and gases
Auto-stand-by mode of soldering units increases
energy efficiency and extends lifetime of products
Protection of Worker’s
Health & the Environment
Fast, intuitive & multi-lingual touch screen operation
Simultanuous operation of two tools with a maximum
power of 255 W available
Consistant & excellent soldering results by stable contact
pressure thanks to an optimized, spring-loaded tip barrel
Key data is saved directly on the tool;
Visual process control via blue LED light
Process Controlled Soldering – Fast & Simple
Increased soldering efficiency & lowered tip prices reduce running
costs
Auto-stand-by mode & Auto-off mode result in significant
energy savings
Running Cost & Energy savings
Soldering
www.labem.pl
14
WX 1 WX 2
Active TipPower-Response
Soldering Stations
WX Adapter
WX Adapter
for PC
T005 87 647 11
WX Adapter
for Zero Smog
T005 87 647 12
WX
connection cable
T005 87 647 10
WXP 200
XHT Soldering tips
WXP 120
XT Soldering tips
WXP 65
XNT Soldering tips
WHP 1000
WHP 3000
600 W
WHP 3000
1200 W
WXHP 120
120 W
Preheating
plates
Fume extraction
WXMT
RTW Desoldering tips
WXMP
RT Soldering tips
max. power supply 200 W max. power supply
200 W (255 W)
Zero Smog 4V
Zero Smog 6V
Zero Smog 20T
Adapter
for Remote control
T005 87 627 24
WX HUB
T005 87 647 26
WXSB 200
Solder bath
Available September 2013
Available September 2013
www.labem.pl
15
WX 2WX 1
Soldering
Dimension L x B x H 170 x 151 x 130 mm (6,69 x 5,94 x 5,12 inch)
Weight ca. 3,2 kg
Channels 1 2
Power supply 230 V | 50 Hz
Power consumption 200 W 200 W (255 W)
Protection class I
Temperature range Adjustable 50–550 °C (150–999 °F); adjustable temperature range varies among tools
Temperature accuracy ± 9 °C (± 17 °F)
Temperature stability ± 2 °C (± 4 °F)
Equipotentional bonding Via 3,5 mm pawl socket on back of device
Material touch panel Made of antistatic coated material (glas)
Dimensions touch panel 74 x 38 mm
Resolution 255 x 127 (128) dots
Display backlighting yes
Equipotentional bonding The 3.5 mm switch box offers four different options:
a) Hard grounded without plug (original delivery)
b) Equipotential bonding: with plug, compensationg line on center contact
c) Potential free: with plug
d) Soft grounded: with plug and soldered resistor grounded via selected resistor
USB-interface USB interface in front for firmware updates, parameterization and monitoring
USB interface supports all standard USB flash drive types
2 further interfaces to connect Weller accessories
ESD safe yes yes
Order-no. T005 34 176 99 T005 34 206 99
Technical Data
www.labem.pl
16
ESD
4
4
3 2
1
Soldering Stations
Order-no. Model Description
T005 34 216 99 WX 2020 Set Power unit with 2 channels 200 W / 230 V
Scope of supply:
1 T005 34 206 99 WX 2 Power unit, 200 W (255 W)
2 T005 29 201 99 2 x WXP 120 Soldering iron 120 W, 24 V
with Power-Response Technolgy
3 T005 44 704 99 2 x XT B Standard tip XT B, Chisel 2,4 x 0,8 mm
4 T005 15 121 99 2 x WDH 10 Safety rest with dry cleaner
Power unit WX 2 with 2 channels,
2 soldering irons WXP 120
The Weller multi tool principle different tools can be connected to the power unit. The intelligent WX tools can be
parameterized by means that the parameters are saved individually to the soldering tool. So these tools are connec-
table to every WX power unit. This saves a lot of time at the workplace.
Intelligent power management allows a max. power of 200 W (255 W). A simultanuous use of different tools is pos-
sible. For your overview, all active tools can be seen in the display and a LED ringlight show the working status.
XT Soldering tip series
page 172/173
WX 2020 Set
Cost savings because only one power unit is needed for
different applications
Use as benchtop controller saves energy
Lowering the running costs by enlarged tip lifetimes
Reduction of rework due to optimized tool use and correct
working temperature
ESD safe
www.labem.pl
17
74
6
2
5
3
1
Order-no. Model Description
T005 34 226 99 WX 2021 Set Power unit with 2 channels 200 W / 230 V
Scope of supply:
1 T005 34 206 99 WX 2 Power unit, 200 W (255 W)
2 T005 29 203 99 WXMP Micro soldering iron 55 W, 12 V
with Active–Tip Technology
3 T005 44 603 99 RT 3 Standard tip RT 3, Chisel 1,3 x 0,4 mm
4 T005 15 171 99 WDH 51 Safety rest with dry cleaner
5 T005 13 177 99 WXMT Micro tweezers 2 x 40 W, 12 V
with Active–Tip Technology
6 T005 44 652 99 RTW 2 Standard tip RTW 2, 0,7 x 0,4 mm, 45°
7 T005 15 169 99 WDH 60 Safety rest with dry cleaner
RT Soldering tip series
page 164/165
Power unit WX 2 with
2 channels, soldering irons
WXMP and tweezers WMRT
WX 2021 Set
Order-no. Model
T005 34 206 99 Power unit WX 2 with 2 channels,
200 W (255 W)
Innovative operation concept
Robust touch screen with ESD safe glas
Intuitive use with turn-click-wheel with enter key
and finger guide.
Blue LED backlighting
Multilingual menu navigation
High functionality
No safety rest with Stop & Go function needed thanks to
integrated acceleration sensor
Optimized precision, better stability by sensor in the
soldering iron
Specific parameterization of tool by storgage medium
in hand piec.
Visual process control via blue LED ring light
All WX tools connectable
Power Unit WX 2
www.labem.pl
18
4
3
2
1
4
3
2
1
Soldering Stations
RT Soldering tip series
page 164/165
XT Soldering tip series
page 172/173
Power unit WX 1 with 1 channel,
micro soldering irons WXMP
Power unit WX 1 with 1 channel,
soldering irons WXP 120
WX 1011 Set
WX 1010 Set
Order-no. Model Description
T005 34 186 99 WX 1010 Power unit with 1 channel, 200 W / 230 V
Scope of supply:
1 T005 34 176 99 WX 1 Power unit, 200 W
2 T005 29 201 99 WXP 120 Soldering iron 120 W, 24 V
with Power-Response Technology
3 T005 44 704 99 XT B Standard tip XT B, Chisel 2,4 x 0,8 mm
4 T005 15 121 99 WDH 10 Safety rest with dry cleaner
Order-no. Model Description
T005 34 196 99 WX 1011 Power unit with 1 channel, 200 W / 230 V
Scope of supply:
1 T005 34 176 99 WX 1 Power unit, 200 W
2 T005 29 203 99 WXMP Soldering iron 55 W, 12 V
with Active–Tip Technology
3 T005 44 603 99 RT 3 Standard tip RT 3, Chisel 1,3 x 0,4 mm
4 T005 15 171 99 WDH 51 Safety rest with dry cleaner
www.labem.pl
19
3
4
2
1
Available adapter for
WX stations see page 14.
Order-no. Model
T005 34 176 99 1-Channel-Power Unit WX 1
200 W / 230 V
Innovative operation concept
Robust touch screen with ESD safe glas
Intuitive use with turn-click-wheel with enter key
and finger guide.
Blue LED backlighting
Multilingual menu navigation
High functionality
No safety rest with Stop & Go function needed thanks to
integrated acceleration sensor
Optimized precision, better stability by sensor in the
soldering iron
Specific parameterization of tool by storgage medium
in hand piec.
Visual process control via blue LED ring light
All WX tools connectable
Power Unit WX 1
XNT Soldering tip series
page 168/169
Power unit WX 1 with 1 channel,
soldering irons WXP 65
WX 1012 Set
Soldering
Order-no. Model Description
T005 34 276 99 WX 1012 Power unit with 1 channel, 200 W / 230 V
Scope of supply:
1 T005 34 176 99 WX 1 Power unit, 200 W
2 T005 29 211 99 WXP 65 Soldering iron 65 W
with Power-Response Technology
3 T005 44 851 99 XNT A Standard tip XNT A, Chisel 1,6 mm
4 T005 15 121 99 WDH 10 Safety rest with dry cleaner
www.labem.pl
ESD
20
Soldering Stations
Reliablity & Longlife
Robust design for continuous operation
Small and compact soldering stations with easy-to-read display
ESD safe unit with different functions: potential equalization,
temp. set-back, stand-by and lock function
Systematic Soldering
Control units accept wide range of different
soldering tools
Power ranges from 80 W up to 150 W for micro-fine
as well as for robot soldering applications
Extensive accessories available: mirco-tweezers,
soldering irons and solder baths
Easy monitoring via Automatic tool recognition and
fast temperature setting via buttons and large
LC display
Take your mark, get set, GO - with SPEED & SAFETY!
www.labem.pl
21
Industrial housing: easy to clean, robust design
High cost saving of consumables; Cost efficient
& long life Silver-Line soldering tips
reduce running costs
Low running costs
Cost-Effective, Industrial
Soldering Station
For different applications with a power range
from 80 W up to 150 W
Fast temperature setting and easy monitoring
Easy to use buttons or potentiometer
and LED signal
Soldering
www.labem.pl
22
PUD 81 PU 81PUD 151WD 1 WD 1M
Active Tip
Standard-LinePower-ResponseSilver-Line
PUD 81i
Soldering Stations
WMRT
RTW Tips
WMRP
RT Soldering tips
WSP 80
LT Soldering tips
WP 65
XNT Soldering tips
max. power
supply 150 W
max. power
supply 80 W
max. power
supply 80 W
max. power
supply 80 W
max. power
supply 150 W
FE-Soldering iron
FE 80
HT Soldering tips
FE 75
LT Soldering tips
WHP 80
Preheating plate
WTA 50
WTA Tips
LR 21
LT Soldering tips
WP 120
XT soldering tips
WMP
NT Soldering tips
MPR 80
LT Soldering tips
WSP 150
LHT Soldering tips
WP 80
LT Soldering tips
WSB 150WSB 80
Solder bath
max. power
supply 80 W
Available from January 2014
Photo similar
www.labem.pl
23
PUD 81 PU 81PUD 151WD 1 WD 1M PUD 81i
Soldering
Technical Data
Dimension L x B x H
34 x 108 x 147 134 x 108 x 147 166 x 140 x 103 166 x 115 x 101 166 x 115 x 101 166 x 115 x 101
Channels 1 1 1 1 1 1
Power supply 230 V 230 V 230 V 230 V 230 V 230 V
Power consumption 95 W 150 W 95 W 95 W 150 W 95 W
Protection class I I I I I I
Temperature range 50°C – 450°C 50°C – 450°C 50°C – 450°C 50°C – 450°C 50°C – 550°C 150°C – 450°C
Temperature accuracy ± 9°C ± 9°C ± 9°C ± 9°C ± 11°C bei 550°C ± 9°C
Temperature stability ± 5°C ± 5°C ± 5°C ± 5°C ± 5°C ± 5°C
Display LCD LCD LED LED LED no
Setting Tasten Tasten Tasten Tasten Tasten Drehpotentiometer
ESD safe yes yes yes yes yes yes
Equipotentional bonding Via 3,5 mm pawl socket on back of device (normal state hard grounded)
USB interface yes* yes* no no no no
Order-no. T005 34 006 99 T005 34 156 99 T005 32 956 99 T005 32 626 99 T005 32 786 99 T005 32 526 99
*optional (see page 25)
mm mm mm mm mm mm
Available from
January 2014
Photo similar
www.labem.pl
24
ESD
4
2
3
1
Soldering Stations
LT Soldering tip
series page 177-180
LT Soldering tip series
page 177-180
Power unit 80 W, 1 channel
as WD 1000 Set but with
safety rest WDH 10T with
Stop & Go function
Power unit 80 W, 1 channel
with soldering iron
For small sensible components
WD 1000 T Set
WD 1000 Set
Cost reduction - longer tip lifetime due to temperature reduction
Automatic tool recognition
Easy tip exchange without tools
ESD safe
Ready, set, go - with perfect accuracy!
1 channel WD soldering station is userfriendly due to the large LC display. 2 special menues for individual settings,
e.g. stand-by mode, lock function and many more.
Order-no. Model Description
T005 34 026 70 WD 1000 T Set Soldering station, 1 channel, 80 W / 230 V
Scope of supply:
T005 34 006 99 WD 1 Power unit, 80 W
T005 29 180 99 WP 80 Soldering iron 80 W, 24 V
with Silver-Line Technolgy
T005 44 405 99 LT B Standard tip LT B, Chisel 2,4 x 0,8 mm
T005 15 161 99 WDH 10T Safety rest with Stop & Go function and
with dry cleaner
Order-no. Model Description
T005 34 026 99 WD 1000 Set Soldering station, 1 channel, 80 W / 230 V
Scope of supply:
1 T005 34 006 99 WD 1 Power unit, 80 W
2 T005 29 180 99 WP 80 Soldering iron 80 W, 24 V
with Silver-Line Technology
3 T005 44 405 99 LT B Standard tip LT B, Chisel 2,4 x 0,8 mm
4 T005 15 121 99 WDH 10 Safety rest with dry cleaner
www.labem.pl
25
Power unit, 1 channel,
digital 150 W / 230 V
For micro soldering iron
WMRP and micro
tweezers WMRT
Power unit, 1 channel,
digital 80 W / 230 V
For all soldering tools
up to 80 W
Soldering
Order-no. Description
T005 31 185 99 USB Interface for ISO applications
Order-no. Model Description
T005 34 006 99 WD 1 Power Unit 80 W / 230 V
WD 1
Power Unit
WD 1M
Power Unit
Order-no. Model Description
T 005 34 156 99 WD 1M Power Unit 150 W, 230 V
www.labem.pl
26
ESD
3 2
1
4
4
3
2
1
Soldering Stations
Easy handling
Very good cost / performance ratio
ESD safe
Digital soldering stations WSD (Optical set and read temperature display) and WS (set-temperature display) stations
Weller WSD and WS stations are cost effective, digital soldering stations with an easy handling.
LT Soldering tip
series page 172
Power unit 80 W, 1 channel
with soldering iron WSP 80
Many parameter are
available with this unit
WSD 81i Set
Order-no. Model Description
T005 32 976 99 WSD 81i Set Soldering station, 1 channel 80 W / 230 V
Scope of supply:
1 T005 32 956 99 PUD 81i Power unit, 80 W
2 T005 29 161 99 WSP 80 Soldering iron 80 W, 24 V
with Silver-Line Technology
3 T005 44 405 99 LT B Standard tip LT B,chisel 2,4 x 0,8 mm
4 T005 15 121 99 WDH 10 Safety rest with cleaning sponge
XNT Soldering tip
series page 172
Power unit 80 W, 1 channel
with soldering iron WP 65
Many parameter are
available with this unit
WSD 81i SE Set
Order-no. Model Description
T005 32 966 99 WSD 81i SE Set Soldering station, 1 channel 80 W / 230 V
Scope of supply:
1 T005 32 956 99 PUD 81i Power unit, 80 W
2 T005 29 215 99 WP 65 Soldering iron 65 W, 24 V
with Power-Response Technology
3 T005 44 851 99 XNT A Standard tip XNT A, chisel 1,6 x 0,4 mm
4 T005 15 121 99 WDH 10 Safety rest with cleaning sponge
Available from January 2014
Photo similar
Available from January 2014
www.labem.pl
27
4
1
3 2
Soldering
Power unit, 1 channel
80 W, 230 V
Many parameter are
available with this unit
PUD 81i
Order-no. Model Description
T005 32 956 99 PUD 81i Soldering station, 1 channel 80 W / 230 V
Power unit 120 W,
1 channel with
soldering iron WP 120
Further parameter with an
external calibration unit.
WCB 2 possible. See page 84
WSD 121 Set
Order-no. Model Description
T005 32 776 70 WSD 121 Soldering station, 1 channel 80 W / 230 V
Scope of supply:
1 WSD 121 Power unit, 120 W / 230 V
2 T005 29 193 99 WP 120 Soldering iron 120 W, 24 V
with Power-Response Technology
3 T005 44 704 99 XT B Standard tip LTB, chisel 2,4 x 0,8 mm
4 T005 15 170 99 KH 18 Safety rest with dry cleaner
T005 15 125 99 WDC 2 Dry cleaner
XT Soldering tip
series page 172/173
Photo similar
Available from January 2014
www.labem.pl
28
4
3
2
1
1
3
4
2
Soldering Stations
LHT Soldering tip series
page 183
Power unit, 1 channel with
soldering iron WSP 150
Further parameter with an
external calibration unit.
WCB 2 possible. See page 84
WSD 151 Set
Order-no. Model Description
T005 32 766 99 WSD 151 Set Soldering station, 1 channel, 150 W / 230 V
Scope of supply:
1 T005 32 786 99 PUD 151 Power unit, 150 W
2 T005 29 170 99 WSP 150 Soldering iron 150 W, 24 V
with Silver-Line Technology
3 T005 44 450 99 LHT F Standard tip LHT F, Chisel 9,3 mm
4 T005 15 027 99 KH 27 Safety rest with cleaning sponge
Power unit 150 W,
1 channel
Further parameter with an
external calibration unit.
WCB 2 possible. See page 84
WSD 151
Power Unit
Order-no. Model Description
T005 32 606 99 WSD 81 Set Soldering station, 1 channel, 80 W / 230 V
Scope of supply:
1 T005 32 626 99 PUD 81 Power unit, 150 W
2 T005 29 161 99 WSP 80 Soldering iron 80 W, 24 V
with Silver-Line Technology
3 T005 44 405 99 LT B Standard tip LT B, Chisel 0,8 mm
4 T005 15 140 99 WPH 80 Safety rest with cleaning sponge
WSD 81 Set
Power unit 80 W, 1 channel
with soldering iron WSP 80
Further parameter with an
external calibration unit.
WCB 2 possible. See page 84
LT Soldering tip
series page
177-180
Order-no. Model Description
T005 32 786 99 WSD 151 Power unit 150 W, 240 V
www.labem.pl
29
1
23
4
Soldering
Order-no. Model Description
T005 32 506 99 WS 81 Set Soldering station, 1 channel,
80 W / 230 V, analog
Scope of supply:
1 T005 32 526 99 PU 81 Power unit, 80 W, analog
2 T005 29 161 99 WSP 80 Soldering iron 80 W, 24 V
with Silver-Line Technolgy
3 T005 44 405 99 LT B Standard tip LT B, Chisel 2,4 x 0,8 mm
4 T005 15 170 99 KH 18 Safety rest with cleaning sponge
PU 81
Power Unit
Order-no. Model Description
T005 32 524 99 PU 81 Power unit switchable,
80 W, 120 V / 240 V
with US plug, analog
Accessory:
T005 87 489 90 Key switch with control panel
WS 81 Set
Power unit, 1 channel with
soldering iron WSP 80
Power unit 80 W
Further parameter with an
external calibration unit.
WCB 2 possible
LT Soldering tip series
page 177-180
www.labem.pl
30
ESD
WTCP 51
Dimension L x B x H: 166 x 115 x 101
Channels: 1
Power supply: 230 V (240 V, 120 V), 50 (60) Hz
Power consumption 55 W
Heating voltage: 24V, 50 (60) Hz
Soldering iron: max. 50 W at 24 V
Display: no
Temperature control: two-level controller
Equipotentional bonding: yes
USB interface: no
Control: two-level controller with temperature sensor
Order-no. T0053220699
Technical Data
Ferro Magnetic Controlled Soldering Station (Magnastat)
The Weller Magnastat system operates through a ferro-magnetic device which changes its characteristics when
specific temperatures are reached. This causes it to either attract or repel a permanent magnet which operates a
power supply switch. In this way power to the heating element can be quickly switched on or off to either provide
extra power for soldering operations or reduced power when idling. Various preselected tip temperatures (260°C,
310°C, 370°C, 425°C, 480°C) are available for different soldering tasks. The unit is not suitable for ESD application
because the iron is not antistatic.
Easy handling
Good cost / performance ratio
Soldering Stations
www.labem.pl
31
4
3 2
1
LT Soldering tip series
page 177-180
Power unit switchable,
50 W, 120 V / 240 V
with US plug
For all tools upto 50 W
except WMRP and WMRT
Power unit, 1 channel with
soldering iron TCPS
WTCP 51 Set
Order-no. Model Description
T005 32 224 99 P 51 Power unit switchable,
50 W, 120 V / 240 V with US plug
P 51
Power Unit
Order-no. Model Description
T005 32 206 99 WTCP 51 Set Soldering station, 1 channel, 50 W / 230 V
Scope of supply:
1 T005 32 226 99 P 51 Power unit, 50 W
2 T005 32 105 99 TCPS Soldering iron 50 W, 24 V
with Silver-Line Technolgy
3 T005 44 415 99 LT M Standard tip LT M, Chisel 2,0 x 0,8 mm
and PT-LT adapter
4 T005 15 020 99 KH 20 Safety rest with cleaning sponge
Soldering
www.labem.pl
32
ESD
The soldering station PUD 151R is suitable for soldering tasks in industrial manufacturing in which the soldering pro-
cess is to be automated. For this purpose the unit is equipped with a monitoring circuit. As function of an adjustable
temperature window (tolerance band) an un-powered contact is reduced to a low impedance. Straight forward, easy
operation is made possible with the usage of a micro processor. Digital control electronics ensure optimal regulation
behaviour with different soldering irons upto 150 W. The soldering irons are automatically recognized by the solde-
ring station and assigned the apropriate control parameter.
Special application for use in solder robots
www.labem.pl
33
PUD 151RWX 2WX 1
Dimension L x B x H 170 x 151 x 130 mm (6,69 x 5,94 x 5,12 inch) 166 x 115 x 101 mm
Weight ca. 3,2 kg
Channels 1 2 1
Power supply 230 V | 50 Hz 230 V
Power consumption 200 W (255 W) 150 W
Protection class I 1
Temperature range Adjustable 50–550 °C (150–999 °F); 150°C – 550°C
adjustable temperature range varies among tools
Temperature accuracy ± 9 °C (± 17 °F) ± 9°C (± 11°C bei 550°C)
Temperature stability ± 2 °C (± 4 °F) ± 5°C (± 9 °F)
Equipotentional bonding V ia 3.5 mm pawl socket on back of device (normal state hard grounded)
Material touch panel Made of antistatic coated material (glas) –
Dimensions touch panel 74 x 38 mm –
Resolution 255 x 127 (128) dots –
Display backlighting yes LED
Equipotentional bonding The 3.5 mm switch box offers four different options:
a) Hard grounded without plug (original delivery)
b) Equipotential bonding: with plug, compensationg line on center contact
c) Potential free: with plug
d) Soft grounded: with plug and soldered resistor grounded via selected resistor
USB-interface USB interface in front for firmware updates, No
parameterization and monitoring
USB interface supports all standard USB flash drive types
2 further interfaces to connect Weller accessories –
ESD safe yes yes yes
Order-no. T005 34 176 99 T005 34 206 99 T005 32 786 70
Technical Data
Soldering
www.labem.pl
34
Order-no. Model Description
T00 32 786 70 PUD 151R Power unit, 1 channel, 150 W
PUD 151R
Temperature window adjustable ± 99°C
Temperatur control via buttons
3-position digital display
Calibration unit WCB 2 connectable (see page 84)
Automatic tool recognition
Digitally controlled electronic for soldering tools upto 150 W
Special application for use in solder robots
www.labem.pl
35
Order-no. Model Description
T005 87 447 13 Cord for HER 80 / 120, 1,6 m
T005 87 657 15 Cord for für HERX 120, 1,6 m
Cord for HER 80 / 120 and HERX 120
Order-no. Model Description Width Thickness Length
Soldering tips for HER 120 with twist lock
T005 44 723 99 XTR A Chisel tip 1,6 mm 0,7 mm 36,0 mm
T005 44 724 99 XTR B Chisel tip 2,4 mm 0,8 mm 35,0 mm
T005 44 725 99 XTR C Chisel tip 3,2 mm 0,8 mm 35,0 mm
T005 44 726 99 XTR D Chisel tip 4,6 mm 0,8 mm 34,5 mm
T005 44 727 99 XTR E Chisel tip 5,9 mm 1,2 mm 34,5 mm
T005 44 728 99 XTR M Chisel tip 3,2 mm 1,2 mm 39,0 mm
XTR Soldering tips for HER 120 and HERX 120
Order-no. Model Description
T005 87 637 30 HER 120 Heating element 120 W
for solder robot application with PUD 151R
HER 120 Heating element
Order-no. Model Description Width Thickness Length
Soldering tips for HER 80 with twist lock
T005 44 441 99 LTR A Chisel tip 1,6 mm 0,8 mm 17 mm
T005 44 422 99 LTR B Chisel tip 1,5 mm wettable 2,4 mm 0,8 mm 17 mm
T005 44 422 71 LTR B Chisel tip 6,0 mm wettable 2,4 mm 0,8 mm 17 mm
T005 44 433 99 LTR C Chisel tip 3,2 mm 0,8 mm 17 mm
Special tips on request
LT Soldering tips for HER 80
Order-no. Model Description
T005 87 447 38 HER 80 Heating element 80 W
for solder robots applications with PUD 151R
HER 80 Heating element
Soldering
Order-no. Model Description
T005 87 657 40 HERX 120 Heating element 120 W
for solder robot application with WX 1 / WX 2
HERX 120 Heating element
www.labem.pl
36
ESD
WAD 101IG
Dimension L x B x H: 166 x 115 x 101
Weight 3,335 kg
Channels 1
Power supply 230 V / 120 V (50/60 Hz)
Power consumption 150 W
Protection class 1 Power unit, 3 Soldering irons,
Temperature range Soldering and desoldering irons adjustable 50°C – 550°C (150°F – 999°F)
Adjustable Temperature range depends on tool
Temperature accuracy ± 2°C
Temperature stability ± 5°C
Potential free contact Optocoupler (transistor output) max. 24 V / 20mA; Pin 1 (+), Pin 2 (-)
Display
Temperature control Via buttons
ESD safe yes
Equipotentional bonding Via 3.5 mm pawl socket on back of device
USB interface no
Order-no. T005 32 666 71
Technical Data
The inert gas soldering irons WP 80IG and WP 120IG achive all ESD requirements and enables soldering jobs with
inert gas in used way. Inert gas is fed through openings in the heating element to envelop the solder joint. Inert gas
and temperature control via power unit WAD 101IG. The set is complete with the Stop & Go safety rest WDH 10P.
Special Application Inert Gas Soldering
Ideal solution for soldering application under an atmosphere of inert gas
Advantages of inert gas soldering
Oxygen will be blocked out from solder joint and soldering tip
• less oxidation on solder joint and soldering tip
• less surface tension of solder
• better flow characteristics of solder
Preheating of solder joints
ESD safe
Better and consistant activation of flux
www.labem.pl
37
Order-no. Model Description
T005 87 637 32 Barrel WP120IG
Order-no. Model Description
T005 29 197 99 WP 80IG Soldering iron 80 W for soldering
with inert gas 50 °C - 450 °C
Order-no. Model Description
T005 29 198 99 WP 120IG Soldering iron 80 W for soldering
with inert gas 50 °C - 450 °C
Order-no. Model Description
T005 15 161 99 WDH 10T Safety rest with Stop & Go function
with dry cleaner
Accessory
LT Soldering tip series
page 177-180
Safety rest WDH 10P with
inert gas barrel set for
soldering iron WSP 80
80 W, 24 V
Lead free soldering
WDH 10P Set
Perfect solution for lead free soldering applications under an atmosphere of inert gas
With the WSP 80 inert gas safety rest set the WSP 80 soldering iron can be switched to an inert gas soldering iron.
The safety rest WDH 10P can be used with the WSP 80IG and WP 120IG. Inert gas is fed through openings in the
heating element to envelop the solder joint.
Order-no. Model Description
T005 15 147 99 WDH 10P Set Inert gas safety rest set 80 W, 24 V
Scope of supply:
WDH 10P Safety rest for use with inert gas, ball valve,
compressed air hose, 4 mm
Inert gas barrel for WSP 80
Order-no. Model Description
T005 32 666 71 WAD 101IG Power unit, 1 channel 150 W
for soldering with inert gas
WAD 101IG
Soldering
www.labem.pl
38
ESD
WSF 81D5WSF 81D8Technical Data
Dimension L x B x H 120 x 217 x 199 mm
Channels 1
Solder ø 0,8 - 1,5 mm ø 0,5 - 0,8 mm
Power supply 230 V / 120 V (50/60 Hz)
Power consumption 95 W
Protection class 1 Power unit, 3 Soldering irons
Temperature range 150°C – 450°C
Adjustable Temperature range digital control
Tools recognition automatically
Display 3 position digital display
Temperature control Via buttons
ESD safe yes
Equipotentional bonding normal state hard grounded
USB interface no
Order-no. T005 28 226 99 T005 28 206 99
The WSF 81D is a soldering station with an automatic solder feeder system. There are 2 suitable solder diameter.
The WSF 81D8 is qualified for solder diameter from 0,8 mm - 1,5 mm, the WSF 81D5 fits from 0,5 mm - 0,8 mm. The
adjustment to the exact diameter is automatically with both stations. The operator can switch between automatic
and continuous solder supply. The power unit is fitted with digital electronics for regulation the soldering iron tem-
perature and solder feed operation. In the feeder unit a solder reel holder can host coils upto max. 1 kg.
Smooth proportion of solder by automatical solder feeder system
„
3.hand“ for easy handling
Special application solder feeder
www.labem.pl
39
4
3
2
1
LT Soldering tip
series page 177-180
LT Soldering tip series
page 177-180
For solder wire from
Ø 0,8 mm upto 1,5 mm
For solder wire from
Ø 0,5 mm upto 0,8 mm
WSF 81D8
Solder Feeder System
WSF 81D5
Solder Feeder System
Order-no. Model Description
T005 28 226 99 WSF 81D8 Solder feeder system 80 W
for wire from Ø 0,8 mm upto 1,5 mm
Scope of supply:
Power Unit
T005 28 116 99 WSF 2 Feeding unit
T005 28 122 99 WSFP 8 Soldering iron 80 W, 24 V with soldering tip LT BX
T005 15 028 99 AK S Safety rest with cleaning sponge
Accessory:
T005 13 120 99 Foot switch 1-step
T005 87 328 32 Soldering nozzle straight ø 1,5 x 63LG F. WSF P/P8
T005 87 328 34 Soldering nozzle straight ø 1,5 x 52LG F. WSF P/P8
T005 87 328 35 Soldering nozzle straight ø 1,0 x 52,5LG F. WSF P/P8
T005 87 328 36 Soldering nozzle straight ø 1,0 x 63LG F. WSF P/P8
Order-no. Model Description
T005 28 206 99 WSF 81D5 Solder feeder system 80 W
for wire from Ø 0,5 mm upto 0,8 mm
Scope of supply:
1 Power Unit
2 T005 28 116 99 WSF 2 Feeding unit
3 T005 28 121 99 WSFP 5 Soldering iron 80 W, 24 V with soldering tip LT HX
4 T005 15 028 99 AK S Safety rest with cleaning sponge
Accessory:
T005 13 120 99 Foot switch 1-step
T005 87 328 48 Soldering nozzle straight ø 0,5 x 52LG F. WSF P5
T005 87 328 50 Soldering nozzle straight ø 0,8 x 52LG F. WSF P5
T005 87 328 73 Soldering nozzle straight ø 0,5 x 62LG F. WSF P5
T005 87 328 74 Soldering nozzle straight ø 0,8 x 62LG F. WSF P5
Soldering
www.labem.pl
40
ESD
WSM 1C
Dimension L x B x H (inch / mm): 5.24 x 4.33 x 2.17 | 133 x 110 x 55 mm
Weight: ca. 2,0 kg
Power supply: 100 V to 240 V
50 Hz to 60 Hz
Power consumption: 50 W
Safety class (with switching power supply) II
(battery powered) III
Temperature control 100°C - 400°C (200°F - 750°F)
Temperature accuracy ± 9°C (± 17°F)
Temperature stability ± 5°C (± 9°F)
Acceleration sensor: Efficient stand-by mode
Equipotentional bonding: via 3,5 mm pawl socket on side of device
Display: Touch-Sensor-Technology
Operating temperature: 10°C - 35°C (50°F - 95°F)
Stock temperature: 24°C - 45°C (75°F - 113°F)
Air humidity: 0% - 90%, no condensation
- Latest LiFePO4 battery technology
- Fixed micro soldering iron WMRP
- Stop & Go function: automatic switch-off of the soldering iron by motion sensor
- Temperature lock function
- Car adapter
Technical Data
Soldering without plug
WSM 1C: first professional rechargeable soldering station for mobile use. The WSM 1C from Weller is a perfect
soldering station when a small mobile tool is required which works absolutey professional.
Heated uptime within 4 seconds only
Cordless soldering capacity upto 1 hour
Precise temperature control
Easy use via touch sensor
ESD safe
Special Applications Mobile Soldering
www.labem.pl
41
4
2
3
1
RT Soldering tip series
page 164/165
Solution for service technician
50 W
WSM 1C
Rechargeable
soldering station
Order-no. Description
T005 87 518 80 Car adapter for recharge via 12 V board net
Accessory
Order-no. Model Description
T005 32 936 99 WSM 1C Rechargeable soldering station with mirco
soldering iron WMRP and soldering tip RT 3,
chisel 1,3 mm and safety rest with dry cleaner.
Recharged in 20 minutes.
Soldering
www.labem.pl
42
8
9 7
6
5
43
1
2
8
9 7
6
5
4
3
1
2
Soldering tip
series 70 for
Pyropen Piezo
page 193
Soldering tip
series 70 for
Pyropen Piezo
page 193
Ignition via lighter
Set in metal box
With self ignition (Piezo)
Set in metal box
Pyropen
Pyropen Piezo
For small mobile soldering application
Cost effective
Easy to recharge via butane gas
Butane Gas Powered Soldering Irons
Powered by butane gas, the Pyropens offer soldering iron, hot air blow and blow torch operations. They have a
short heat up time and are refilled in seconds from a refill cylinder. A small glass window shows the level of gas in
the reservoir. The temperature variation is obtained by increasing or decreasing the gas flow. All Pyropen soldering
irons need very clean refill for precise temperature regulation.
Order-no. Model Description
T005 16 060 99 Pyropen Pyropen butane gas powered profi line
soldering iron
Scope of supply:
1 Soldering iron Pyropen
2 T005 16 121 99 70-01-02 Chisel tip 3,0 mm
3 T005 16 142 99 70-01-52 Hot air nozzle Ø 4,9 mm
4 T005 16 151 99 70-07TU Torch ejector
5 T005 16 160 99 RB-TS Gas refill canister 75 ml
6 T005 16 156 99 7040U Metal box
7 T005 16 281 99 7042 Burn proof accessory pocket
8 Iron holder
9 Cleaning sponge
Order-no. Model Description
T005 16 059 99 Pyropen Piezo Pyropen butane gas powered profi line
soldering iron (self ignition)
Scope of supply:
1 Soldering iron Pyropen Piezo
2 T005 16 121 99 70-01-02 Chisel tip 3,0 mm
3 T005 16 142 99 70-01-52 Hot air nozzle Ø 4,9 mm
4 T005 16 159 99 70-01-55 Reflector unit Ø 6,0 mm
5 T005 16 160 99 RB-TS Gas refill canister 75 ml
6 T005 16 156 99 7040U Metal box
7 T005 16 281 99 7042 Burn proof accessory pocket
8 Iron holder
9 Cleaning sponge
Special Applications Mobile Soldering
www.labem.pl
43
5
4
3
1
2
3
1
2
Soldering
tip series 60
page 192
Soldering tip
series 71 for
Pyropen Jr.
page 192
Manual ignition
Set with soldering tip,
hot air nozzle and knife
Manual ignition
Pen shape
WP 60K
Pyropen Jr.
Order-no. Model Description
T005 16 087 99 WP 60K Butane gas powered soldering iron
Scope of supply:
1 WP 60 Soldering iron
2 T005 16 134 99 60-01-05 Needle tip Ø 0,5 mm
3 T005 16 447 99 60-01-52 Hot air nozzle Ø 4,7 mm
4 T005 16 135 99 60-01-06 Hot knife 5,0 mm, 45°
5 T005 16 450 99 60-02 Protection cap
Refill Canister
Order-no. Model Description
T005 16 160 99 RB-TS Butane gas refill canister
Order-no. Model Description
T005 16 075 99 Pyropen Jr. Butane gas powered mini soldering iron
Scope of supply:
1 Pyropen Junior Soldering iron
2 T005 16 165 99 70-01-01 Needle tip Ø 1,0 mm
3 Aluminium protection cap
Soldering
www.labem.pl
44
WR 3M
Rework – Soldering, Desoldering and Hot Air
Low Investment Costs
Cost effective soldering process with Automatic tool recognition
guarantees safe & simultaneous operation of up to 3 tools
Fully integrated multi-channel unit saves investment costs &
workbench space
Energy Savings & Environmental Protection
Low running costs with flexible use of tools & process
controlled, stabile working temperatures
Energy efficient repair processes with longer tip & nozzle lifetime
Stand-by mode for desoldering tool
Energy saving desoldering
The Repair Professionals with Multi-Channel Flexibility!
www.labem.pl
45
ESD
WR 2M
Hot Air SolderingDesoldering
Flexible Solution for All Soldering &
Desoldering Applications
One power unit for all rework applications: compact, multi-
channel unit more cost effective compared to single units
High flexibility with various connectable tools:
Soldering and desoldering irons, hot air irons, preheating
plates, wire strippers and solder baths
Safe Soldering & Desoldering Operations
ESD safe in accordance with all
industrial & military standards worldwide
www.labem.pl
46
Active Tip
Silver-Line
Power-Response Standard-Line
WR 3M
WMRP
RT Soldering tips
WMRT
RTW Tips
WSP 150
LHT Soldering tips
MPR 80
LT Soldering tips
WVP
Accessory
WRK
Accessory
WP 200
XHT Soldering tips
WP 120
XT Soldering tips
WP 65
XNT Soldering tips
WMP
NT Soldering tips
WTA 50
WTA Tips
LR 21
LT Soldering tips
Rework – Soldering, Desoldering and Hot Air
max. power supply 360 W
WP 80
LT Soldering tips
www.labem.pl
47
WR 2
Hot Air SolderingDesoldering
DSX 120
XDS Nozzles
FE 75
LT Soldering tips
FE-Soldering Iron
FE 80
HT Soldering tips
Hot Air Iron
HAP 200
Hot air nozzles
HAP 1
Hot air nozzles
Desoldering Iron
DSX 80
DX Nozzles
DXV 80
DX Nozzles
WST 82
WSB 150WSB 80
WHP 80
Stripping Tool
Solder Bath
Preheating Plate
max.power supply 250 W
www.labem.pl
48
ESD
Rework – Soldering, Desoldering and Hot Air
One station meets the requirements of a rework workplace
Unique connecting compatibility of all tools
3 respectively 2 independend tool channels with automatic tool recognition
guarantee the simultanuous operation of 2 to 3 soldering tools.
Tools are permanentely ready for use
www.labem.pl
49
WR 2WR 3M
Technical Data
Dimension L x B x H 273 x 235 x 102 mm
Weight: ca. 6,7 kg
Channels 3 2
Net supply 230 V 230 V
Power supply 400 W 300 W
Protection class 1 Power unit, 3 Soldering irons
Fuse T500 mA (230 V / 50/60 Hz)
Fuse: overcurrent release 2 A 1,6 A
Temperature control of channels Soldering- and desoldering irons continuously 50°C - 550°C (150°F - 999°F)
Temperature control range depends on tool
Soldering iron WP 80 / WP 120: 50°C - 450°C (150°F - 850°F)
Soldering iron WP 200 / WSP 150: 50°C - 550°C (150°F - 950°F)
Soldering iron WMRT / WMRP (only WR 3M): 100°C - 450°C (200°F - 850°F)
Desoldering iron DSX 80 / DXV 80: 50°C - 450°C (150°F - 850°F)
Desoldering iron DSX 120: 50°C - 450°C (150°F - 850°C)
Hot air irons HAP 200 (only WR 3M) / HAP 1: 50°C - 550°C (150°F - 950°C)
Temperature accuracy ± 9°C
Temperature stability ± 2°C
Bleeder Soldering tip (Tip to ground) IPC-J-001 conform
Bleeder voltage Soldering tip (Tip to ground) IPC-J-001 conform
Pump (periodic duty 30/30 s)
Max. vacuum 0,7 bar
Max. delivery rate max. 18 l/min max. 18 l/min
Hot Air max. 15 l/min max. 10 l/min
Display LCD
Temperature control Buttons
ESD safe yes yes
Equipotentional bonding Via 3.5 mm pawl socket at the back of device (hard grounded normal state)
USB interface yes no
Order-no. T005 33 666 99 T005 33 776 99
Hot Air SolderingDesoldering
www.labem.pl
50
7
9
8 6
5
1
4
10
2
7
10
9
8
6
5
1
4
3
2
3
Power unit, 3 channels with
soldering iron WP 80, desol-
dering iron DXV 80 and hot air
iron HAP 200.
Desoldering iron DXV 80 for
vertical applications
WR 3000M Set
for vertical
applications
Order-no. Model Description
T005 33 683 99 WR 3000M Set Rework station, 3 channels WR 3M
Scope of supply:
1 T005 33 666 99 WR 3M Power unit, 360 W
2 T005 29 180 99 WP 80 Soldering iron, 80 W
with Silver-Line Technolgy
3 T005 44 405 99 LT B Standard tip, Chisel 2,4 x 0,8 mm
4 T005 15 161 99 WDH 10T Safety rest with Stop & Go functions for WP 80
5 T005 13 180 99 DXV 80 Inline desoldering iron, 80 W
6 T005 15 153 99 WDH 40 Safety rest for desoldering iron DXV 80
7 T005 27 116 99 HAP 200 Hot Air Iron, 200 W
8 T005 15 152 99 WDH 30 Safety rest for hot air irons HAP 200
9 T005 29 184 99 WVP Vacuum pick-up
T005 13 150 00 DX 113HM Desoldering tip
Software
LT Soldering tip series
page 177-180
Hot air nozzles
page 198-204
DX Nozzle
page 194
LT Soldering tip series
page 177-180
Hot air nozzles
page 198-204
DX Nozzle
page 194
Power unit, 3 channels with
soldering iron WP 80, desol-
dering iron DSX 80 and hot
air iron HAP 200
Large allround set for all
repair jobs
Desoldering iron DSX 80 for
horizontal applications
WR 3000M Set
Order-no. Model Description
T005 33 686 99 WR 3000M Set Rework station, 3 channels WR 3M
Scope of supply:
1 T005 33 666 99 WR 3M Power unit, 360 W
2 T005 29 180 99 WP 80 Soldering iron, 80 W
with Silver-Line Technolgy
3 T005 44 405 99 LT B Standard tip LT B, Chisel 2,4 x 0,8 mm
4 T005 15 161 99 WDH 10T Safety rest with Stop & Go function and dry cleaner
5 T005 13 190 99 DSX 80 Desoldering iron, 80 W
6 T005 13 150 00 DX 113HM Nozzle
7 T005 15 152 99 WDH 30 Safety rest for DSX 80 with dry cleaner
8 T005 27 116 99 HAP 200 Hot air iron, 200 W
9 T005 15 152 99 WDH 30 Safety rest for hot air iron HAP 200 with dry cleaner
10 T005 29 184 99 WVP Vacuum pick-up
Software
Rework – Soldering, Desoldering and Hot Air
10
www.labem.pl
51
79
8
6
5
1
4
3
2
Accessories
for both
WR 3000M sets
Order-no. Description
T005 87 388 50 Adapter for foot switch
T005 13 120 99 1 step foot switch
T005 29 184 99 WVP Vacuum pick-up
T005 87 658 01 PDN Pliers Desoldering Nozzle
Hot Air SolderingDesoldering
WR 3000MER
Order-no. Model Description
T005 33 688 11 WR 3000MER Set Rework station, 3 channels WR 3M
Scope of supply:
1 T005 33 666 99 WR 3M Power unit, 360 W
2 T005 29 193 99 WP 120 Soldering iron, 120 W, 24 V
with Power-Response Technolgy
3 T005 44 704 99 XT B Standard tip XT B, chisel 2,4 x 08 mm
4 T005 15 121 99 WDH 10 Safety rest with Stop & and dry cleaner
5 T005 13 198 99 DSX 120 Desoldering iron, 120 W, 24 V
6 T005 15 152 99 WDH 30 Safety rest with dry cleaner
7 T005 27 116 99 HAP 200 Hot air iron, 200 W
8 T005 15 152 99 WDH 30 Safety rest with dry cleaner
9 T005 87 658 01 PDN Pliers Desoldering Nozzle
LT Soldering tip series
page 172-173
Hot air nozzles
page 198-204
XDX Nozzle
page 197
Power unit, 3 channels with
soldering iron WP 120,
desoldering iron DSX 120
and hot air iron HAP 200
Large allround set for all
repair jobs
Desoldering iron DSX 120 for
horizontal applications
www.labem.pl
52
3
1
2
Rework – Soldering, Desoldering and Hot Air
Temperature range from
50°C – 550°
Hot air flow adjustable
Activation of hot air flow via
finger switch
For WR 3M only
HAP 200 Set
Order-no. Model Description
T005 27 117 99 HAP 200 Set Hot air iron set 200 W, 24 V
Scope of supply:
1 T005 27 116 99 HAP 200 Hot air iron 200 W / 24 V
with hot air nozzle R 06 round Ø 3,0 mm
2 T005 15 152 99 WDH 30 Safety rest
3 T005 87 278 21 R 04 Hot air nozzle round Ø 1,2 mm
T005 87 617 28 Adapter M6 for HAP 200
T005 87 278 22 R 06 Hot air nozzle round Ø 3,0 mm
Nozzles
page 198-204
www.labem.pl
53
3
11
6
5
7
4
2
Hot Air SolderingDesoldering
DX Nozzles
page 194
LT Soldering
tip series
page 177-180
Power unit, 2 channels with
soldering iron WP 80, desol-
dering iron DSX 80
Small repair set for all
rework applications
Simultaneous operation of
hot air and desoldering iron
is not possible.
WR 2002 Set
Order-no. Model Description
T005 33 806 99 WR 2002 Set Rework station, 2 channels WR 2
Scope of supply:
1 T005 33 776 99 WR 2 Power unit
2 T005 29 180 99 WP 80 Soldering iron 80 W
with Silver-Line Technolgy
3 T005 44 405 99 LT B Standard tip LT B, Chisel 2,4 x 0,8 mm
4 T005 15 121 99 WDH 10 Safety rest with dry cleaner
5 T005 13 150 00 DX 113 HM Nozzle inner-Ø 1,2 mm
6 T005 13 190 99 DSX 80 Desoldering iron 80 W / 24 V
7 T005 15 152 99 WDH 30 Safety rest with dry cleaner
Power cable
Equipotential bonding connector
www.labem.pl
54
ESD
Compressed air system for
stable desoldering & high vacuum
Fast and easy filter change
Less Maintenance
Cost Savings
Extremely fast heat-up time of desoldering iron
in only 40 sec. from 50°C up to 350°C!
Stand-by mode of desoldering iron saves energy & tip life
Easy and fast setting of tool parameters with WX technology
via ESD safe touch screen
Ergonomics & Safety
Two Channel, High Power
Soldering & Desoldering
High power soldering & desoldering
tools Simultaneous running of two
120 W, intelligent WX tools
Process parameters are stored
directly on the soldering or
desoldering tool
Process controlled, stabile working
temperatures
Flexible & fast modification of
workplace possible
Single-handed, easy & safe change of
solder reservoir via bayonet & cardboard
solder cartridge - not hot to handle!
Fatigue-reduced, gentle work possible and
safe handling by the latest ergonomic
grip-design
The BEST of the very BEST!
Soldering and Desoldering Stations
www.labem.pl
55
SolderingDesoldering
Flexible Solutions for professional soldering
& desoldering applications
One power unit for various rework applications;
Compact set more cost effective compared to single units
High flexibility with various connectable tools:
Soldering and desoldering irons, hot air irons, preheating
plates, wire strippers and solder baths.
Low Investment Costs
Cost effective soldering process with
automatic tool recognition guarantees safe
operation of both irons
Fast & safe soldering and desoldering
Fully integrated multi-channel unit saves investment
costs & workbench space
www.labem.pl
56
WXD 2
Power-Response
Active Tip
Options for adapter connections
see page 14.
DSX 120
XDS Desoldering nozzles
Desoldering iron
WX
Connection cable
T005 87 647 10
WX Adapter
for Zero Smog
T005 87 647 12
WX Adapter
for PC
T005 87 647 11
WX Adapter
Preheating
plates
Fume Extraction
WXMT
RTW Tips
WXMP
RT Soldering tips DSX 80
DX Desoldering nozzles
DXV 80
DX Desoldering nozzles
WXP 200
XHT Soldering tips
WXP 120
XT Soldering tips
WXP 65
XNT Soldering tips
WXDP 120
XDS Nozzles
Soldering and Desoldering Stations
WHP 1000
WHP 3000
600 W
WHP 3000
1200 W
WXHP 120
120 W
WXDV 120
XDS Nozzles
WXSB 200
Soldering
bathes
Zero Smog 4V
Zero Smog 6V
Zero Smog 20T
Available September 2013
Available September 2013
Available September 2013
www.labem.pl
57
WR 2
Power-Response Standard-Line
Silver-Line
SolderingDesoldering
FE-Soldering Iron
WP 200
XHT Soldering tips
WP 120
XT Soldering tips
WP 65
XNT Soldering tips
WMP
NT Soldering tips
FE 80
HT Soldering tips
FE 75
LT Soldering tips
Hot air iron
HAP 1
Hot air nozzles
WTA 50
WTA Tips
LR 21
LT Soldering tips
MPR 80
LT Soldering tips
WSP 150
LHT Soldering tips
WP 80
LT Soldering tips
WST 82
WHP 80
Wire Stripper
Solder bathes
Preheating plate
WSB 150WSB 80
www.labem.pl
58
ESD
ESD
WXD 2
Cost effective because only one station is needed
Less rework by optimal use of tools and the correct working temperature.
Reduction of running costs by longer tip lifetime
Desoldering iron with stand-by mode
ESD safe
WR 2
Only one station that meets all rework requirements
Unique compatibility
Many tools are connectable (except WX tools)
2 independent channesl with automatic tool recognition guarantees
simultanuous operation of 2 tools
ESD safe
Soldering and Desoldering Stations
www.labem.pl
59
WXD 2 WR 2
SolderingDesoldering
Technical Data
Dimension L x B x H 170 x 151 x 130 mm 273 x 235 x 102 mm
Weight: 3,8 kg ca. 6,7 kg
Channels 2 2
Power supply 230 V 230 V
Power supply 200 W (255 W) 300 W
Protection class 1 power unit, 3 Soldering irons
Fuse T2 A
Fuse: overcurrent release 1,6 A
Temperature accuracy ± 9°C
Temperature stability ± 2°C
Bleeder Soldering tip (Tip to ground) IPC-J-001 conform
Bleeder voltage Soldering tip (Tip to ground) IPC-J-001 conform
Vacuum source via Venturi Pump
Air consumption 35l/min max. pressure 0,7 bar
max vacuum 55 kPal (8 psi) periodic duty 30/30 s
Hot Air – max. 15 l/min
Display LCD LCD
Temperature control Touch Keys
ESD safe yes yes
Equipotention bonding Via 3.5 mm pawl socket (hard grounded normal state)
USB interface yes no
Order-no. T005 34 266 99 T005 33 776 99
www.labem.pl
60
1
2
4
5
7
3
2
1
4
3
6
New products enlarge the WX family. A new WXD 2 desoldering station and a new WXDP desoldering iron.
These tools are ideal for professional rework applications of the latest electronic components in the industrial
operation. Typically for the WX stations: soldering and desoldering parameters can be saved easily on the iron.
The WXDP 120 heats up within 35 sec. only. With stand-by function.
XT Soldering tip series
page 172–173
XDS Nozzle-series
page 197
XDS Nozzle-series
page 197
Desoldering station, 2 chan-
nels digital and electronically
controlled with desoldering
iron WXDP 120
Soldering- and desoldering
tools with intelligent
WX technology
Connection to external
compressed air supply for
high vacuum
Energy effective: automatic
stand-by mode for tools
Patented, ESD safe glass
display. Simple and fast
setting of soldering parameter.
WXD 2020
WXD 2010
Order-no. Model Description
T005 34 296 99 WXD 2020 Set Solder- and Desoldering station,
2 channels 200 W (255 W)
Scope of supply:
1 T005 34 266 99 WXD 2 Power Unit
2 T005 13 201 99 WXDP 120 Desoldering iron 120 W, 24 V
3 T005 13 250 99 XDS 1 Nozzle
4 T005 15 172 99 WDH 70 Safety rest with dry cleaner
5 T005 29 202 99 WXP 120 Soldering iron
6 T005 44 704 99 XT B Standard soldering tip, chisel 2,4 x 0,8 mm
7 T005 15 121 99 WDH 10 Safety rest with dry cleaner
T005 87 658 01 PDN Desoldering pliers
Soldering and Desoldering Stations
Soldering and desoldering
station, 2 channels with
WXDP 120 and soldering
iron WXP 120
Order-no. Model Description
T005 34 286 99 WXD 2010 Set Solder- and Desoldering station,
2 channels 200 W (255 W)
Scope of supply:
1 T005 34 266 99 WXD 2 Power Unit
2 T005 13 201 99 WXDP 120 Desoldering iron 120 W, 24 V
3 T005 15 172 99 WDH 70 Safety rest with dry cleaner
4 T005 13 250 99 XDS 1 Nozzle
T005 87 658 01 PDN Desoldering pliers
www.labem.pl
61
2
1
4
3
3
2
1
7
6
45
SolderingDesoldering
DX Soldering tip
series page 194
Power unit, 2 channels with
desoldering iron DSX 80 and
safety rest WDH 30.
Repair kit for soldering and
desoldering
WR 2000D
Order-no. Model Description
T005 33 796 99 WR 2000D Desoldering station, 2 channels, 250 W
Scope of supply:
1 T005 33 776 99 WR 2 Power unit
2 T005 13 190 99 DSX 80 Desoldering iron 80 W / 24 V
3 T005 13 150 00 DX 113 HM Nozzle inner-Ø 1,2 mm
4 T005 15 152 99 WDH 30 Safety rest with dry cleaner
Power cable
Equipotential bonding (normal state hard grounded)
XDS Nozzle Series
page 197
XNT Soldering tip
series page 168/169
Power unit, 2 channels
with desoldering iron DSX 80,
soldering iron WP 65 and
safety rests WDH 10 & WDH 30.
Repair kit for soldering and
desoldering
WR 2000ER
Order-no. Model Description
T005 33 808 99 WR 2000ER Desoldering station 2 channels, 250 W
Scope of supply:
1 T005 33 776 99 WR 2 Power unit
2 T005 13 198 99 DSX 120 Desoldering iron 120 W / 24 V
3 T005 13 250 99 XDS 1 Nozzle
4 T005 29 215 99 WP 65 Soldering iron 65 W, 24 V
5 T005 44 851 99 XNT A Soldering tip
6 T005 15 121 99 WDH 10 Safety rest with dry cleaner
7 T005 15 152 99 WDH 30 Safety rest with dry cleaner
T005 87 658 01 PDN Desoldering pliers
Power cable
Equipotential bonding (normal state hard grounded)
www.labem.pl
62
Soldering Stations
Small power unit
Small and compact housing
This station is easy to integrate to the workplace and supports the
organization of soldering processes.
Best soldering results
Electronically controlled hot air station. Best soldering results
with inert gas or compressed air for component safe soldering
Fix solder joints
Easy handling of air volume and temperature parameters
Automatic tool recognition
More than just hot air...
Hot Air
www.labem.pl
63
Hot Air
Low running costs by safety rests
Foot switch for activating the hot air
Temperature sensor for process control
Control via PC possible
www.labem.pl
64
WR 2
Silver-Line Power-Response Standard-Line
WST 82WHP 80
Wire stripper
Preheating plate
WP 65
XNT Soldering tips
MPR 80
LT Soldering tips
WSP 150
LHT Soldering tips
WP 80
LT Soldering tips
WP 200
XHT Soldering tips
WP 120
XT Soldering tips
WMP
NT Soldering tips
WTA 50
WTA Nozzles
LR 21
LT Soldering tips
Hot Air
Hot air iron
HAP 1
Hot air nozzles
FE-Soldering iron
FE 80
HT Soldering tips
FE 75
LT Soldering tips
DSX 120
XDS Nozzles
Desoldering iron
DSX 80
DX Nozzles
DXV 80
DX Nozzles
max. power supply 250 W
www.labem.pl
65
WAD 101WXA
Active TipPower-Response
Hot Air
max. power supply 100 W
Fume Extraction
Zero Smog 4V
Zero Smog 6V
Zero Smog 20T
WHP 1000
WHP 3000
600 W
WHP 3000
1200 W
WXHP 120
120 W
WX Adapter
WX Adapter
for PC
T005 87 647 11
WX Adapter
for Zero Smog
T005 87 647 12
WX
Connection cable
T005 87 647 10
Options for adapter connections
see page 14.
WX Adapter
for Remote
control
T005 87 627 24
Preheating
plate
WXP 200
XHT Soldering tips
WXP 120
XT Soldering tips
WXP 65
XNT Soldering tips
WXHAP 200
XHT Hot air nozzles
Available September 2013
Available September 2013 Available September 2013
www.labem.pl
66
ESD
WAD 101WR 2WXA 2
Dimension (L x B x H) 170 x 151 x 130 mm 273 x 235 x 102 mm 166 x 134 x 101
Weight ca. 3,3 kg ca. 6,7 kg
Channels 1 2 1
Power supply 230 V 230 V 230 V
Power input 200 W 300 W 150 W
Protection class I I I
Fuse T 2,0 A Fuse: overcurrent release 1,6 A 230 V: T 630 mA / 120 V: T 1,0 A
Temperature range Adjustable Soldering- and desoldering irons Hot air 50°C – 550°C
50 °C - 550 °C continuously °C Version: Soldering iron 50°C – 550°C
(150 °F - 999 °F) 50°C – 550°C (150°F – 999°F) °F Version:
Temperature control range Temperature control range Hot air 122°F – 999°F
depends on tool depends on tool Soldering iron 122°F – 842°
WP 80 / WP 120
50°C – 450°C (150°F – 850°F)
WP 200
50°C – 550°C (150°F – 950°F)
WSP 150
50°C – 550°C (150°F – 950°F)
DSX 80 / DXV 80 / DSX 120
50°C – 450°C (150°F – 850°F)
HAP 1
50°C – 550°C (150°F – 999°F)
Temperature accuracy Hot air ± 30°C (± 54°F) ± 9°C (± 20°F)
Soldering iron ± 9°C (± 17°F)
Temperature accuracy HAP 1 ± 30°C (± 50°F)
Temperature stability ± 2°C (± 5°F)
Air volume 0 – 20 l/min. approx. 0 - 10 l/min
Pressure Pressure input, 400 kPa (58 psi), oilfree, dry compressed air or inert gas N2
Vacuum max 15 l/min
Order-no. T005 34 256 99 T005 33 776 99 T005 32 686 99
Technical Data
For every application we offer the optimal tool
From to 100 to 700 W
Wide nozzle program
Hot Air
Available September 2013
www.labem.pl
67
4
1
2
3
Hot Air
Hot air nozzles
page 198–204
Power unit, 2 channels with
Hot air iron WXHAP 200
Best set for hot air tasks
Simultaneous operation of 2
soldering tools
All WX tools compatible
WXA 2010 Set
Order-no. Model Description
T005 34 306 99 WXA 2010 Power unit, 2 channels 200 W (255 W) / 230 V
Scope of supply:
1 T005 34 256 99 WXA 2 Power unit, 2 channels 200 W (255 W)
2 T005 27 119 99 WXHAP 200 Hot air iron 200 W
3 T005 87 278 22 R 06 Hot air nozzle R 06 round ø 3,0 mm
4 T005 15 152 99 WDH 30 Safety rest with dry cleaner
T005 87 278 21 R 04 Hot air nozzle R 04 round Ø 1,2 mm
Power cable
Equipotential bonding (normal state hard grounded)
WXA 2
Hot air nozzle
page 198–204
Order-no. Model Description
T005 34 256 99 WXA 2 Power unit, 2 channels 200 W (255 W) / 230 V
Scope of supply:
T005 34 256 99 WXA 2 Power unit, 2 channels 200 W (255 W) / 230 V
Power unit, 2 channels
Available September 2013
Available September 2013
www.labem.pl
68
3
1
2
Hot Air
Hot air nozzles
page 198–204
Hot air station, 2 channels
with hot air iron HAP 1
Large hot air set
Simultanuous operation
of 2 soldering tools
All soldering tools upto
200 W connectable
WR 2000A Set
Order-no. Model Description
T005 33 786 99 WR 2000A Hot air station, 2 channels 300 W / 230 V
Scope of supply:
1 T005 33 776 99 WR 2 Power unit 300 W
2 T005 27 115 99 HAP 1 Hot air iron 100 W / 24 V
T005 87 278 22 R 06 Hot air nozzle R 06 round ø 3,0 mm
3 T005 15 152 99 WDH 30 Safety rest with dry cleaner
T005 87 278 21 R 04 Hot air nozzle R 04 round Ø 1,2 mm
Power cable
Equipotential bonding (normal state hard grounded)
www.labem.pl
69
4
3
1
2
Hot Air
Hot air nozzles
page 198–204
Hot air station, 1 channel
with HAP 1 soldering iron
Small hot air set
For hot air irons or soldering
irons upto 100 W
WAD 101 Set
Order-no. Description
T005 87 388 50 Adapter for foot switch
T005 13 120 99 Foot switch 1 step
Accessories
Order-no. Model Description
T005 32 666 99 WAD 101 Hot air station, 1 channel 150 W / 230 V
Scope of supply:
1 T005 32 686 99 PU WAD101 Power Unit 150 W
2 T005 27 115 99 HAP 1 Hot air iron 100 W / 24 V
T005 87 278 22 R 06 Hot air nozzle R 06 round ø 3,0 mm
3 T005 15 027 99 KH 27 Safety rest with cleaning sponge
4 T005 87 278 21 R 04 Hot air nozzle round ø 1,2 mm
www.labem.pl
70
4
3
5
2
1
4
3
5
2
1
Hot air nozzles
page 198–204
Hot air nozzles
page 198–204
700 W Hot air station
With integrated vacuum
With integrated turbine
With integrated vacuum
700 W Hot air station
For compressed air or
inert gas.
WHA 3000P
WHA 3000V
The Weller WHA hot air stations are designed for soldering and desoldering sensitive SMD components with hot air.
The station use temperature and volume controlled hot air with Weller patented nozzle technology. 3 stations are
available: a digital hot air station with integrated turbine and vacuum (WHA 3000V and WHA 3000P) and an analog
hot air station without vacuum for easy applications (WHA 900). A wide range of different nozzles for common SMD
components are available.
Order-no. Model Description
T005 33 346 99 WHA 3000P Hot air station 700 W / 230 V
Scope of supply:
1 WHA 3000P Power Unit 230 V with integrated turbine
2 HAP 3000 Hot air iron
3 T005 15 043 99 AKT 30 Safety rest with Stop & Go function
T005 87 577 70 Foot switch 2 steps
4 T005 15 049 99 Nozzle change tool
5 T005 87 507 21 NQ 30 Nozzle, 4 side heated, 17,5 x 23,5 mm
Order-no. Model Description
T005 33 366 99 WHA 3000V Hot air station 700 W / 230 V
Scope of supply:
1 WHA 3000V Power unit 230 V for use with
compressed air or inert gas
2 HAP 3000 Hot air iron
3 T005 15 043 99 AKT 30 Safety rest with Stop & Go function
T005 87 577 70 Foot switch 2 steps
4 T005 15 049 99 Nozzle change tool
5 T005 87 507 21 NQ 30 Nozzle, 4 side heated, 17,5 x 23,5 mm
Hot Air
www.labem.pl
71
005 87 578 93
005 87 578 94
"c
lick"
005 87 578 92
005 87 578 99
Hot Air
For heat shrinking, drying or
to detect faulty components
on circuit boards.
Cooling is possible because
the air flow is independent
of the heater.
Temperature range ca.
400°C - 430°C
Order-no. Model Description
6966EK 6966EK Hot air heat gun 210 W / 230 V
Scope of supply:
Hot air heat gun 210 W
6964 0,2“ Reflector 0,2"
6957 1,5“ Reflector 1,5"
6958 Shrinking nozzle
Accessory:
6965A Rest for gun
6966 EK Hot air heat gun
Hot air nozzles
page 198–204
700 W hot air station for
easy repair applications and
heating processes as e.g.
shrinking
Brushless turbine for ideal
hot air flow
Hot air temperature is
electronically controlled
WHA 900
Order-no. Model Description
T005 31 716 70 WHA 900 as WHA 900 (see above) with foot switch for
activating the hot air
Scope of supply:
WHA 900 WHA 900 with connection for foot switch
Foot switch 1 step
WHA 900 with
Foot switch
Order-no. Model Description
T005 31 716 99 WHA 900 Hot air station 700 W / 230 V
Scope of supply:
T005 15 048 99 Depositing rackNR, ND, NQ
T005 15 157 99 Rest for WHA 900
Optional:
T005 87 578 98 Horizontal rest for HAP 3
Attention: Hot air nozzles are not included in the scope of supply (see page 198-204).
Foot switch is not connectable to WHA 300 (T005 87 578 98)
Optional horizontal rest for HAP 3
www.labem.pl
72
Order-no. Description
T005 15 154 99 Depositing rack for nozzles
T005 87 617 32 Reflow housing Set
10 x 10 mm, 12,5 x 12,5 mm, 15,5 x 15,5 mm
T005 87 617 31 Reflow housing Set 20 x 20 mm, 27 x 27 mm
T005 87 617 30 Reflow housing Set 33 x 33 mm, 24 x 24 mm
T005 87 137 99 Rubber insert Ø 4,5 mm, 10 pieces
T005 87 137 98 Rubber insert Ø 10,0 mm, 10 pieces
Accessories
Reflow system with vacuum
pick-up
For desoldering of SMD
components 30 X 30 mm
WRK Reflow system
Order-no. Model Description
T005 15 155 99 WRK Reflow system for SMD components with
external hot air
works with desoldering station WR 3M
Scope of supply:
Reflow housing:
once each 33 x 33 mm, 27 x 27 mm, 24 x 24 mm, 20 x 20 mm,
15,5 x 15,5 mm, 12,5 x 12,5 mm, 10 x 10 mm
Vacuum Pick-up 4,5 mm
Vacuum Pick-up 10 mm
Tripod Pick-up
Depositing rack for nozzles
Hot Air
www.labem.pl
73
Hot Air
WRK Sets
Order-no. Model Description
T005 87 617 32 WRK Set Reflow Set 18 x 18 mm / 15,5 mm x 15,5 mm /
12,5 x 12,5 mm / 10 mm x 10 mm
Scope of supply:
Rubber insert, 4,5 CSF/WVP, 3 pieces
Tripod
Vacuum Pick up Ø 4,5 mm
Reflow housing 18 x 18 mm
Reflow housing 15,5 x 15,5 mm
Reflow housing 12,5 x 12,5 mm
Reflow housing 10 x 10 mm
VAC-hose, WVP-WRK
Order-no. Model Description
T005 87 617 31 WRK Set Reflow Set 27 x 27 mm / 20 mm x 20 m
Scope of supply:
Rubber insert,10,0 CSF, 4 pieces.
Spring, 4 Stk.
Vacuum Pick up Ø 10,0 mm
Reflow housing 27 x 27 mm
Reflow housing 20 x 20 mm
VAC-hose, WVP-WRK
Order-no. Model Description
T005 87 617 30 WRK Set Reflow Set 33 x 33 mm / 24 mm x 24 mm
Scope of supply:
Rubber insert,10,0 CSF, 3 pieces
Spring, 3 pieces
Vacuum Pick up Ø 10,0 mm
Reflow housing 33 x 33 mm
Reflow housing 24 x 24 mm
VAC-hose, WRK
www.labem.pl
74
BGA/QFP Rework Systems
www.labem.pl
75
Rework
www.labem.pl
ESD
76
WQB 4000SOPSWHA 3000VWHA 3000P
Dimensions
(B x L x H) mm:
240 x 270 x 170 240 x 270 x 101 692 x 580 x 680
Dimensions
(W x L x H) inch: 9,44 x 10,63 x 6,69 9,44 x 10,63 x 3,97 248 x 248 x 256
Mains supply voltage: 230 V 230 V 230 V
Power Output: 700 W 700 W 2300 W
Top heating: 700 W
Heating plate: large 1600 W (260 x 260 mm)
small 400 W (120 x 120 mm)
(switchable)
Compressed air supply: – 400 – 600 kPa 400 – 600 kPa
clean, dry compressed air clean, dry compressed air
Temperature accuracy: 50°C – 550°C 50°C – 550°C continuously variable 50°C – 400°C
+/ - 30°C (+ - 54°F) +/ - 30°C (+ - 54°F) Control accuracy ±10°C
Air volume hot air: continuously variable 5 – 50 l/min
Air consumption: 5 – 50 l/min 5 – 50 l/min 60 – 100 l/min
Safety Class: 1 (control unit and hand 1 (control unit and hand 1
piece hard grounded) piece hard grounded)
Order-no. T005 33 346 99 T005 33 366 99 T005 33 706 99
Technical Data
BGA/QFP Rework Systems
www.labem.pl
77
Rework
BGA Hot air nozzles
page 198–204
700 W
Hot air station with turbine
WHA 3000P
Order-no. Model Description
T005 33 346 99 WHA 3000P 700 W Hot air station with turbine
BGA Hot air nozzles
page 198–204
700 W Hot air station
Integrated turbine
Set with Infrared preheating
plate and circuit board holder
WHA 3000PS Set
WHA 3000PS Set – The versatile system for repair and rework of fine pitch and BGA components
The WHA 3000P will perform demanding repair tasks on circuit boards with complex fine pitch surface mounted
components. The advanced control technology coupled with user-friendly operation, guarantees precision of repair
processes. While the sophisticated automatic operation mode guarantees repeatability of the process and increases
productivity and quality. Extensive range accessories compliment the machine to promote flexibility.
Further Accessories see page 82.
Patented Weller nozzle technology for maximum process control and user friendly operation. The powerful variable
speed controlled turbine generates an air volume of up to 50 litres/min. Hot Air Nozzle flows hot air at the compo-
nent. Memory space to store up to 10 thermal profiles to ensure process repeatability.
Manual operation or operation via PC software.
Order-no. Model Description
T005 33 556 99 WHA 3000PS Set Hot air station
Scope of supply:
1 T005 33 346 99 WHA 3000P 700 W Hot air station with integrated turbine
2 T005 33 165 99 WBHS Circuit board holder with pivoting stand
3 T005 33 386 99 WHP 3000 Infrared preheating plate, 600 W
www.labem.pl
78
Hot air nozzles
page 198–204
700 W
For use with inert gas
WHA 3000VS Set
Order-no. Model Description
T005 33 596 99 WHA 3000VS Set 700 W Hot air station
Scope of supply:
T005 33 366 99 WHA 3000V Hot air station 700 W for
use with inert gas
T005 33 165 99 WBHS Circuit board holder with pivoting stand
T005 33 386 99 WHP 3000 Infrared preheating plate, 600 W
WBHS Circuit board holder with a pivoting stand for the HAP 3000 hot air pencil. Circuit boards upto 310 mm x 320
mm can be accommodated. The circuit board holder ensures that the hot air pencil is vertical to the printed circuit
board under repair and the pivoting stand allows the HAP 3000 hot air pencil to be raised and lowered precisely
onto the component being reworked.
Circuit board holder with
a pivoting stand
For boards upto
310 x 320 mm
WBHS
Order-no. Model Description
T005 33 165 99 WBHS Circuit board holder with a pivoting stand
BGA/QFP Rework Systems
www.labem.pl
ESD
ESD
79
Order-no. Model Description
T005 33 646 99 WHP 3000 Infrared preheating plate 1200 W / 230 V
with Easy Fix board holder
Accessory:
T005 31 191 99 RS 232 Interface cable
T005 31 190 99 K-Thermoelement 0,5 mm
T005 33 165 99 WBHS Circuit board holder with pivoting stand
T005 33 164 99 WBH Circuit board holder without pivoting stand
1200 W, 230 V
Board size upto 190 x 245 mm
Temperature range 50°C – 400°C
Digital display for set and actual
temperature
Digitally controlled
3 Infrared high temperature ceramic
elements for fast and efficient heat up
2 Easy Fix board holder
(as WHP 200 see page 87)
K-type thermo couple socket
for monitoring
WHP 3000
Infrared preheating plate
Order-no. Model Description
T005 33 386 99 WHP 3000 Infrared preheating plate 600 W / 230 V
with Easy Fix board holder
600 W, 230 V
Board size upto 120 x 190 mm
Temperature range 50°C – 400°C
Digital display for set and actual
temperature
Digitally controlled
3 Infrared high temperature ceramic
elements for fast and efficient heat up
2 heated zones can be selected
External sensor (accessory) connectable
RS 232-Interface cable e.g. for connec-
tion to WHA 3000 hot air station
Easy Fix board holder
(as WHP 200 see page 87)
K-type thermo couple socket
for monitoring
WHP 3000
Infrared preheating plate
Rework
www.labem.pl
80
Weller WQB Rework System
The WQB 4000SOPS rework system upgrades the Weller product range in the SMD tool sector. A well thought-out
design concept combines reliability and maximum process control with ease of use and technicaly advanced
solutions. Usefull accessories increase the possible uses of these repair work stations. For the universal circuit
board repair of BGA, QFP and SMD components, it is necessary to preheat the circuit board effectively from below
and from above to precisely heat the components to be repaired to the reflow temperature as well as to reliably
control the process. On the WQB 4000 the temperature regulated 2-Zone infrared bottom heater provides rapid
warm-up and homgeneous substrate temperatures. The hot air top heater, with digital control electronics for
temperature monitoring and regulation of the air flow rate, facilitates the finely metered supply of heat to
the components.
A temperature sensor placed directly in the hot air nozzle efficiently regulates the top heater and thus provides
maximum process control. On the digital programming unit all process steps can be programmed, saved and
if necessary protected against unauthorized use as required. The most important process parameters are optionally
displayed on the LC display during operation. Camera with two-color lighting for exact positioning.
BGA/QFP Rework Systems
www.labem.pl
81
BGA Hot air nozzles
page 204
2300 W / 230 V
BGA/SMT Rework system
For components placing
with camera support placing
system
WQB 4000SOPS
Order-no. Model Description
T005 33 706 99 WQB 4000SOPS BGA/SMT Rework system 2300 W / 230 V
Scope of supply:
Base unit with top heater, bottom heater, control electronics and pneumatic unit
Infrared radiation 1600 W
Positioning unit with digital camera and split optic
Circuit board holder with fine adjustment in X and Y direction
Temperature sensor PT 100
Nozzle change tool
Thermoelement type K 0,1 mm
5 pcs. Vacuum inserts Ø 4,5 mm
5 pcs. Vacuum inserts Ø 10,0 mm
Software WQB 4000 CONTROL and WQB 4000 SOPS
USB cable
Calibration tool
Vacuum pick up with 2 changeable vacuum inserts
Mains cable
2 m connecting tube for compressed air
Instruction manual
Max. PC board size 450 x 500 mm
Rework
www.labem.pl
1 2
1
2 3
82
BGA/QFP Rework Systems
Downholder
Order-no. Description
1
T005 87 557 41 Spring-loaded downholder with magnet stand
for WQB 3000, WQB 3000SOPS, WBH, WBHS
2
T005 87 667 25 Spring loaded downholder with magnet stand for WQB 4000 with
aluminium angle. Angle downholder please order separately.
3
T005 87 667 26 Angle downholder (for WQB 4000 with aluminium angle)
T005 87 667 27 Set consists of: 2 x T005 87 667 25 & 1 x T005 87 667 26
Adjustable circuit
board stop
Order-no. Description
T005 87 548 73 WQB 3000 Adjustable circuit board stop
for WQB 3000 and WQB 4000
Support
Order-no. Description
1
T005 87 557 45 Support for large circuit boards
for WQB 3000, WQB 3000OPS, WQB 4000SOPS with iron angle
2
T005 87 667 29 Support for circuit boards for WQB 4000 with aluminium angle
Accessories for für WQB 4000SOPS, WQB
3000OPS, WQB 3000 and WHA 3000 PS / VS
Clamping set
Order-no. Description
T005 87 549 24 Clamping set for irregluar shaped circuit boards
(e.g. mobilephones, video/digital camera boards, etc.)
www.labem.pl
83
Rework
Vacuum insert
Order-no. Description
T005 87 137 99 Vacuum insert Ø 4,5 mm, 10 piece
T005 87 137 98 Vacuum insert Ø 10,0 mm, 10 piece
NQ-Adapter
Order-no. Description
T005 87 549 70 NQ adapter for WQB 2000/3000/4000
Thermoelement
Order-no. Description
T005 87 557 82 Thermoelement type K, Ø 0,1 mm
T005 31 190 99 Thermoelement type K, Ø 0,5 mm
Temperature sensor
Order-no. Description
T005 87 549 48 Temperature sensor
for WQB 3000, WQB 3000OPS, WQB 4000SOPS
WPK Print Kit
Order-no. Description
T005 13 847 99 The right print kit for your component. On request
consits of: Print station complete with squeegee blade 70 x 25 mm
Matching print templates for your device on request.
www.labem.pl
84
OFFSET: Correction value for soldering tip
temperature
SETBACK: Reduction on set temperature
after a specified period of time
LOCK: Locking the set temperature
°C/°F: Switching temperature display °C/°F
WINDOW: Setting a set value window.
If the actual temperature is within the set
value window a potential-free contact is
activated
Temperature measuring tips are available
for each soldering iron
WCB 2 Measuring and Calibration Box
The WCB 2 is an external input unit for programming additional functions. It works with every digital Weller sta-
tion. The setting is fast and easy. Battery powered supply makes the box independent from any mains and easy to
transport. The WCB 2 has an PC interface (RS 232) and an integrated temperature gauge for thermo couple type K
(accessory). The functions are:
Order-no. Model Description
T005 31 180 99 WCB 2 Calibration unit
Scope of supply:
Calibration unit
Battery 4 x 1,5 V
Accessories:
T005 31 184 99 Network adapter 230 V, 50 Hz
T005 31 190 99 Thermoelement type K, ø 0,5 mm
T005 31 191 99 Interface Cable RS 232
WCB 2
Measuring and Calibration Box
for WSD series
Accessories for Temperature Measuring and Calibration
www.labem.pl
85
ESD
Order-no. Model Description
T005 13 832 99 For connection to unit WCB 2 or all other
temperature measure instruments with
type K sensor port.
Connection to WCB 2
calibration unit
For measuring soldering tip
temperature
Temperature
Measuring System
WTT 1 Temperature Measuring Unit
The WTT 1 digital temperature measuring system has been specially designed for measuring the temperature of
soldering iron tips. The probe has a double sensor system and an own internal heat source. The measured tempe-
rature is fed to a control system that records the flow of heat in the probe and stabilises it with the aid of the
internal heat source. This design ensures that no heat is drawn by the probe from the object to be measured.
Erroneous measurements due to the large thermal load of the probe are thus prevented.
The measured temperature is indicated on a three-digit LED display to a resolution of 1°C. A red dot in the display
is used to indicate the measured value and simplifies the reading of the measured temperature. An adjustable pre-
heat temperature ensures a rapid response even at high temperatures. Different methods of equipotentioal bon-
ding and the ESD appropriate design of the control unit and probe supplement the quality of this measuring unit.
Order-no. Model Description
T005 31 246 99 WTT 1 Temperature measuring system
Scope of supply:
Power unit
T005 29 109 99 Probe for WTT 1
Temperature range
50°C –500°C
Tolerance +/- 5°C
Dimensions 166 x 115 x 101 mm
(L x W x H)
WTT 1
Temperature measuring system
Accessories
www.labem.pl
86
ESD
ESD
ESD
Order-no. Model Description
T005 33 648 99 WHP 1000 Preheating plate 1000 W, 230 V, 220 x 150 mm
1000 W, 230 V
Heating surface
Temperature range
RS 232 Interface e.g. for connection to
Weller hot air stations WHA 3000
Digital display for set and read temperature
Element Type K (accessory) connectable
WHP 1000 Preheating plate
Preheating plates are used to preheat circuit boards under repair to reduce the possibility of thermal damages and
to reduce the heat requirement of the soldering tool for speeding up the repair process.
Order-no. Model Description
T005 27 028 99 WHP 80 Preheating plate 80 W, 24 V, 80 x 50 mm
80 W, 24 V
Heating surface 80 x 50 mm
Temperature range 50°C – 200°C
For all Weller stations with min. 80 W
Size housing 150 x 120 x 65 mm
(L x B x H)
WHP 80 Preheating plate
Accessories Preheating plates
Order-no. Model Description
T005 27 029 99 WXHP 120 Preheating plate120 W, 24 V, 80 x 50 mm
120 W, 24 V
Preheating Size 80 x 50 mm
Temperature range 50°C – 200°C
Platinum sensor
Internal parameter storage
(Zero Tolerance)
Connectable to:
WX 1, WX 2, WXD 2 WXA 2
Size housing
150 x 120 x 65 mm
(L x B x H)
WXHP 120 Preheating plate
Available from September 2013
www.labem.pl
87
ESD
ESD
ESD
Order-no. Model Description
T005 33 646 99 WHP 3000 Infrared preheating plate 1200 W, 230 V
with Easy Fix board holder
Accessories:
T005 31 191 99 RS 232 Interface Cable
T005 31 190 99 Thermoelement Type K 0,5 mm
T005 33 165 99 WBHS PC board holder with pivoting stand
T005 33 164 99 WBH PC board holder without stand
1200 W, 230 V
Heating surface 190 x 245 mm
Temperature range 50°C - 400°C
Digital display for set and read
temperature
Electronic temperature control
6 Infrared high temperature ceramic
elements for fast and efficient heat up
2 Easy Fix board holder
(as WHP 200)
WHP 3000
Infrared preheating plate
Order-no. Model Description
T005 33 386 99 WHP 3000 Infrared preheating plate 600 W / 230 V
with Easy Fix board holder
600 W, 230 V
Heating surface 120 x 190 mm
Temperature range 50°C - 400°C
Digital display for set and read temperature
Electronic temperature control
3 Infrared high temperature ceramic
elements for fast and efficient heat up
Two heated zones can be selected
Element Type K (accessory) connectable
RS 232 Interface e.g. for connection to
Weller hot air stations WHA 3000
2 Easy Fix board holder
(as WHP 200)
WHP 3000
Infrared preheating plate
Order-no. Model Description
T005 33 716 99 WHP 200 Preheating plate 200 W, 230 V, 120 x 60 mm
with easy fix board holder
200 W, 230 V
Heating surface 120 x 60 mm
Temperature range 50°C - 400°C
Digital display for set and read temperature
Electronic temperature control
Infrared high temperature ceramic elements
for fast and efficient heat up
2 Easy Fix board holder
ESD safe
WHP 200
Infrared preheating plate
Accessories
Easy Fix
board holder
www.labem.pl
88
ESD
ESD
Microscope with digital camera and USB
interface
Adjustable work stand
Application software
Resolution: 1280 x 1024 MP
Interface: USB 2.0
Magnification: 20X – 90X
Sensor 1/3“ Color CMOS
Video frame rate: up to 30 Fps
Illumination: 8 build-in Hightech LEDs
LED on/off controlled by software
Save file format: BMP, JPG, AVI
Dimensions: 100 mm (L) x 32 mm (D)
Cable length: approx. 1,8 m
Order-no. Model Description
T005 33 167 99 WBH2 Board holder without stand
Max. size 310 x 320 mm
WBH 2 PCB board holder
Order-no. Model Description
T005 15 026 99 ESF 120ESD PCB board holder
Max. size 160 x 235 mm
Rotates through 360° in increments of 15°
Spring clamp
Cushioned arm for component fixing
ESF 120ESD PCB board holder
Order-no. Model Description
T005 13 835 99 USB Microscope with digital camera
and adjustable work stand
T005 13 839 99 USB Microscope with digital camera and
adjustable work stand, with polarisation filter
T005 13 834 99 Stand without arm
USB Microscope
Accessories PCB Board Holders
www.labem.pl
89
Max. size 310 x 320 mm
Board positioning in X and Y directions
For single and doublesided boards
Stand to mount hot air pencil HAP 3000
Preheating plate WHP 3000 could be fitted
under the board holder
Order-no. Description
T005 87 548 73 Adjustable circuit boarder stop
T005 87 557 45 Support for large dimensioned circuit boards
T005 87 557 41 Downholder for circuit boards
T005 87 549 24 Clamping set for irregular shaped circuit boards
(e.g. mobile phones, video/digital camera boards, etc.)
Accessories for WBHS, WBH, WQB
Order-no. Model Description
T005 33 164 99 WBH PCB board holder without stand
WBH PCB board
holder without stand
Order-no. Description
T005 33 166 99 Stand of WBHS
Stand of WBHS
Order-no. Model Description
T005 33 165 99 WBHS PCB board holder with stand
for WHA 3000P + WHA 3000V
WBHS PCB
board holder with stand
Accessories
Same as WBHS but
without stand
www.labem.pl
90
ESD
Order-no. Model Description
T005 27 042 99 WSB 150 WSB 150 Soldering bath 150 W, 24 V
150 W, 24 V
Soldering bath size: 58 x 33 x 19 mm (L x W x H)
Temperature range 50°C – 550°C
Connectable to all Weller 150 W digital stations
V2A tray to guard against dripping solder residue
Size housing: 150 x 120 x 65 mm (L x W x H)
Heat-up time ~ 10 min (50°C – 350°C)
For lead free solder
WSB 150 Soldering Bath
Order-no. Model Description
T005 27 040 99 WSB 80 Soldering bath 80 W, 24 V
80 W, 24 V
Inside Ø 20 mm, depth 25 mm
Temperature range 50°C – 450°C
Connectable to all Weller 80 W digital stations
V2A tray to guard against dripping solder
residue
Size housing: 150 x 120 x 65 mm
(L x B x H)
Heat-up time ~ 7 min
(50°C – 350°C)
For lead free solder
WSB 80 Soldering Bath
Rework preparation tool e.g. for tin coating of wire ends and cleaning of leads and wires from excess and dirt.
All soldering baths are suitable for leadfree solder.
Order-no. Model Description
T005 61 093 99 W101 H Miniature soldering bath 100 W, 230 V
Scope of supply:
Miniature soldering bath with 330°C insert
and horizontal stand
Accessories:
T005 11 706 99 Insert for temperature 285°C
T005 11 707 99 Insert for temperature 330°C
T005 11 708 99 Insert for temperature 380°C
T005 11 709 99 Insert for temperature 450°C
100 W, 230 V
Inside Ø 17,4 mm, depth 22 mm
Different temperatures available
Magnastat temperature control
Horizontal stand
For lead free solder
W101 H Soldering Bath
Accessories Soldering Bathes
Order-no. Model Description
T005 27 043 99 WXSB 200 WXSB 200 Soldering bath 200 W, 24 V
WXSB 200 Soldering Bath
200 W, 24 V
Soldering bath size: 58 x 33 x 19 mm (L x W x H)
Temperature range 100°C – 500°C
Connectable to all WX tools
Heat-up time ~ 10 min (50°C – 350°C)
Size housing: 150 x 120 x 65 mm
(L x W x H)
Available from September 2013
www.labem.pl
91
2 3 4 5 6 7
6
3 7
2
1
2
1
Suitable for all 80 W
Weller stations
For ribbon cable and
round wire
Order-no. Description
2 T005 87 257 22 Universal knife set 9 mm x 2 mm
3 T005 87 257 26 Knife set AWG AWG 12, 16, 24 (2,0, 1,3, 0,51 mm)
4 T005 87 257 29 Knife set AWGAWG 12, 14, 24, 26 (2,0, 1,6, 0,51, 0,4 mm)
5 T005 87 257 32 Knife set AWG AWG 14, 18, 22, 26 (1,6, 1,02, 0,64, 0,4 mm)
6 T005 87 257 36 V-Knife set AWG 4,25 mm x 2 mm
7 T005 87 257 42 Cutting knife set, width 23 mm 23 mm
Accessories WST 82
Order-no. Model Description
T005 25 031 99 WST 82 KIT2 Thermal stripping tool 80 W, 24 V
with flexcord for wider operation range
Scope of supply:
Thermal stripping tool WST 82
1 T005 87 250 34 Brush
6 T005 87 257 36 V-Knife Set 4,25 mm x 2 mm
2 T005 15 032 98 Safety rest
Suitable for all 80 W
Weller stations
Flex cord for 1,5 - 3,5 m
working distance
For ribbon cable and
round wire
Thermal
stripping tool
WST 82 KIT2
The Weller WST 82 temperature controlled thermal stripping tool is suitable for all 80 W Weller stations.
It strips off thermoplastic insulation materials by using precisely shaped stripping blades.
The stripping length is adjustable up to 30 mm. Optimal temperature control via power unit (accessory).
Order-no. Model Description
T005 25 032 99 WST 82 KIT1 Thermal stripping tool 80 W, 24 V
Scope of supply:
Thermal stripping tool WST 82
T005 87 250 34 Brush
7 T005 87 257 42 Cutting knife set
3 T005 87 257 26 Knife Set AWG 12, 16, 24
T005 15 032 98 Safety rest
Thermal
stripping tool
WST 82 KIT1
Accessories
www.labem.pl
92
Order-no. Model Description
PS200A PS 200A Manual desoldering pump
Accessories:
PS 2001A Desoldering tip antistatic for PS 200A
Length 200 mm
Strong vacuum,
minimal rebound
Metal housing
antistatic
(with tip PS 2001A)
PS 200A
Manual desoldering pump
Order-no. Model Description
PS100A PS 100A Manual desoldering pump
Accessories:
PS 1001A Desoldering tip antistatic for PS 100A
Length 150 mm
Strong vacuum,
minimal rebound
Metal housing
antistatic
(with tip PS 1001A)
PS 100A
Manual desoldering pump
With the hand-held desoldering pumps a vacuum is produced by means of a piston, cylinder and spring force.
The piston is tensioned manually and secured automatically. The piston is moved back suddenly by pressing the
release button and a vacuum is created briefly so that the soldered joint is freed of liquid solder.
Order-no. Model Description
SA21A SA 21A Manual desoldering pump
Accessories:
SA 21A1 Desoldering tip antistatic for SA 21A
Length 200 mm
Metal housing
antistatic
SA 21A
Manual desoldering pump
Accessories Desoldering Pumps
www.labem.pl
93
Order-no. Model Description
T005 13 013 99 ABW 2 Extension for additional reel, to be
fixed on SD 1000
For use of coils up to 1000 g
Length 95 mm, core Ø > 17 mm
Length 70 mm, core Ø > 12 mm
Length 84 mm core Ø < 12 mm
ABW 2 Extension
for additional reel
Order-no. Model Description
T005 13 017 99 SD 1000 Solder Dispenser
For use of coils up to 1000 g
Length 95 mm, core Ø > 17 mm
Length 70 mm, core Ø > 12 mm
Length 84 mm, core Ø < 12 mm
SD 1000 Solder Dispenser
Order-no. Model Description
WLSK200 WLSK 200 Vacuum-Pen
including Tip 3,2 mm x 9,5mm
Accessories:
WLSK200T18 WLSKT 18 Replacement with tip, rubber 3,2 mm
WLSK200T38 WLSKT 38 Replacement with tip, rubber 9,5 mm
KDS260S KDS 260S Replacement rubber Ø 3,2 mm
KDS260M KDS 260S Replacement rubber Ø 6,3mm
KDS260L KDS 260L Replacement rubber Ø 9,5 mm
WLSK 200 Vacuum-Pen
Vacuum-Pen
For easy pick and place of delicate SMD components. The vacuum pen avoids stress and damage to the leads.
The versatile compact sized pen is independent from compressed air or batteries.
Accessories
www.labem.pl
94
Order-no. Model Description
T005 15 124 99 WDC Dry cleaner for soldering tips
with brass cleaning wool
Accessories:
T005 13 840 99 Brass cleaning wool for WDC (2 pieces)
T005 13 824 99 Metal wool for WDC (2 pieces)
Minimisation of the erosion
Double soldering tip lifetime
Superior wetting properties
Reduced spring effect - less solder splashes
WDC Dry cleaner
Order-no. Description
T005 22 419 99 Cleaning sponge single-layer, 70 x 55 x 16 mm
T005 22 420 99 Cleaning sponge double-layer, 70 x 55 x 16 mm
Cleaning sponge
Order-no. Model Description
T005 13 827 99 Stainless steel brush (3 pieces)
Stainless steel brush
Order-no. Model Description
T005 15 125 99 WDC 2 Dry Cleaner for WDH safety rests
with brass cleaning wool
Accessories:
T005 13 841 99 Brass cleaning wool for WDC 2 (2 pieces)
T005 13 825 99 Metal wool for WDC 2 (2 pieces)
WDC 2 Dry cleaner
The solution for cleaning lead free solder!
When using lead free you will be experienced an increased in oxidation in the wettable area of the tip. These oxides
must be removed regularly otherwise it will make the tip completely unwettable and not usable anymore. When
cleaning the tip by means of the Weller WDC Dry Cleaner a special brass wool is used. First the surplus solder is
removed by tapping the tip on the soft edge of the collector box.The final cleaning is then done by pushing and tur-
ning the tip in the brass wool. After cleaning there is still a fine amount of solder on the tip avoiding fast oxidation
of the iron layer which is an advantage versus the cleaning by the wet sponge. The brass wool can be soaked in flux
which may improve the performance further. More informations for cleaning you can find on page 160/161.
Accessories Cleaning Tools
www.labem.pl
95
Accessories
Soldering wire with integrated flux core
Superior wetting properties
Cost reduction due to reduction in tip
change frequency
Not flux soaked - no process pollution
Reduction of service costs for removing
of oxidised layers
No-clean flux
Flux content 3,5 %
Further informations for
cleaning you can find
on page 160–161.
WSW Lead free soldering wire
for longer tip lifetime
Order-no. Model Description
T005 13 031 99 Tip-Activator For regeneration of oxidized tips
Cleaning only possible in hot
state of the soldering tip.
Further informations for cleaning
you can find on page 160–161.
Tip-Activator
Order-no. Model Description
WPB1 WPB 1 Polishing Bar for removal of compacted oxidised
films on soldering tips.
Cleaning only possible in cold state
of the soldering tip.
Further informations for cleaning
you can find on page 160/161
WPB 1 Polishing Bar
Type WSW SAC M1 WSW SAC L0 WSW SC L0 WSW SC M1
Alloy Sn3.0Ag0.5Cu Sn3.0Ag0.5Cu Sn0.7Cu Sn0.7Cu
Temperature 217-221°C 217-221°C 227°C 227°C
Flux
J-STD 004 M1 L0 L0 M1
Flux
content 3.5% 3.5% 3.5% 3.5%
Weight 500 gr 500 gr 500 gr 500 gr
Diameter Art.-Nr. Art.-Nr. Art.-Nr. Art.-Nr.
0,3 mm T005 13 865 99 T005 13 872 99 - -
0,5 mm T005 13 864 99 T005 13 870 99 T005 13 880 99 T005 13 876 99
0,8 mm T005 13 863 99 T005 13 869 99 T005 13 879 99 T005 13 875 99
1,0 mm T005 13 862 99 T005 13 868 99 T005 13 878 99 T005 13 874 99
1,2 mm T005 13 861 99 T005 13 867 99 T005 13 877 99 T005 13 873 99
1,6 mm T005 13 860 99 T005 13 866 99 - -
Gewicht 250 gr 250 gr 250 gr 250 gr
Diameter Art.-Nr. Art.-Nr. Art.-Nr. Art.-Nr.
0,8 mm T005 13 885 99 T005 13 887 99 - -
1,0 mm T005 13 886 99 T005 13 888 99 - -
Weight 100 gr 100 gr 100 gr 100 gr
Diameter Art.-Nr. Art.-Nr. Art.-Nr. Art.-Nr.
0,3 mm T005 13 881 99 T005 13 883 99 - -
0,5 mm T005 13 882 99 T005 13 884 99 - -
Available September 2013
www.labem.pl
96
4
3
2
1
3
2
1
4
Order-no. Model Description
T005 15 126 99 WDC Dry cleaner
Scope of supply:
1 T005 15 124 99 WDC Weller Dry Cleaner
2 T005 13 031 99 Tip Activator
3 T005 13 827 99 Stainless steel brush
4 WPB 1 Polishing Bar
The desoldering wires consists of a copper net with flux.
The special surface treatment allows efficient solder removal.
Further informations for
cleaning you can find on
page 160–161.
WDC Dry cleaner
Order-no. Model Description
T005 15 127 99 WDC 2 Dry cleaner
Scope of supply:
1 T005 15 124 99 WDC 2 Weller Dry Cleaner
2 T005 13 031 99 Tip Activator
3 T005 13 827 99 Stainless steel brush
4 WPB 1 Polishing Bar
Further informations for
cleaning you can find on
page 160–161.
WDC 2 Dry cleaner
Order-no. Model Description
T005 13 010 99 Desoldering wire 1,6 m coil, width 1,5 mm
T005 13 011 99 Desoldering wire 1,6 m coil, width 2 mm
T005 13 012 99 Desoldering wire 1,6 m coil, width 2,5 mm
T005 13 028 99 Desoldering wire 15 m coil, width 2,5 mm
T005 13 026 99 Desoldering wire 30 m coil, width 1,5 mm
T005 13 027 99 Desoldering wire 30 m coil, width 2 mm
Desoldering Wires
Accessories Cleaning Tools
www.labem.pl
97
Accessories
Order-no. Description
T005 32 099 99 Extension cord 2-wire, 4 m for,Soldering iron TCPS
T005 25 098 99 Extension cord 5-wire, 4 m, up to 50 W for
Soldering iron LR 21, MLR 21, WTA 50
T005 26 098 99 Extension cord 7-wire, 3 m, up to 80 W,
for Soldering iron WMP, WP 80, WSP 80
Extension cord
The Spot-Mask is a material to protect connectors of PCBs from tinning during the reflow process.
For manual rework the Spot-Mask is easily applied and removed. Mechanical fixture after 6 min, hardened
after 2-3 hours by 20°C, 1 hour by 95°C.
Storable 12 months.
Suitable for lead free applications.
Order-no. Model Description
SM15748BK Spot-Mask Suitable for lead free applications, 250 ml
Spot-Mask
With brush
Solvent content 73 %
ROL1 related to
IPC J-STD-004
Order-no. Description
T005 13 837 99 Liquid flux RMA (15 ml) especially for BGA and SMT rework.
Very reliable, avoids short cuts
Liquid flux
Without brush.
Typ 1.1.3.AF-SW32,
EN29 454
Remaining flux is not corrosive
DIN EN 61190 ROL0
Flux on base of resin Order-no. Description
T005 13 831 99 Liquid flux (100 ml) for simple soldering applications with high
temperature and long soldering times (for example wire and dip)
Liquid flux
www.labem.pl
98
90 minutes soldering with leadfree solder wire
before after
Fine dust accumulation in
the human body
The smaller the particles are, the deeper they penetrate into
the respiratory system
The deeper the particles penetrate, the higher are the
health risks
The smallest particles travels via alveoli into the bloodstream
It is important to use the correct safety equipment to remove
these hazardous substances. Fine particles are more dangerous
to inhale than big particles as they get caught more easily and
block the alveoli in the lungs.
To protect the operator it is important to use an extraction
system that is able to separate these particles and gases and then
re-circulates the cleaned air back into the work place. This saves
energy and reduces energy costs.
Many work environments today, including soldering, adhesives,
welding and laser applications, create particles and gases that
can be harmful to the work place and the environment. Most
people thought that the move to leadfree soldering would be
more nature friendly. In reality leadfree soldering smoke
emissions contain more breathable fine dust particles.
More smaller particles are produced due to the higher working
temperatures required and because more flux is used in the
soldering process.
In many countries legal regulations governing clean air in the
work place require that hazardous substances are removed from
the air in order to avoid harmful effects on people and machines.
Why Fume Extraction ?
Fibres 10 µm
Pollen 10 µm
Bacteria
Pigments 5 µm
Smog
Asbestos dust > 1µm
Viruses > 0,5 µm
Gas
Fine dust filter F7 / M5
Wide band gas filter E 12
Gasfilter
www.labem.pl
99
2. or 3.
1.
2. or 3.
2. + 3.
1.
100
90
80
70
60
50
40
30
20
10
0
95 %
97 % >99,5 %
600
500
400
300
200
100
0
0,1 0,5 2,5 12,5
Fume Extraction
Leadfree solder 310 °C
Leadfree solder 340 °C
Increasing soldering temperature causes higher
pollutant concentration of small particles!
Million particles pro m3
Particle size in µm
0,1 0,5 2,5 12,5
600
500
400
300
200
100
0
Filter class M 5 F 7 E 12
100
90
80
70
60
50
40
30
20
10
0
Medium filtration efficiency Em %
against particle size 0,12 µm
Filter drawings not true to original
1.
2. + 3.
2. or 3.
1.
2. or 3.
Filter process
Filter classes and recommended applications
Pollution concentration
1. Fine dust filter
For standard applications with a small amount of flux and polluti-
on gases with high solid content, Weller® FT offers filter classes
M 5 or F 7.
2. Compact filter consisting of:
EPA filter
Filter particles up to 0,3 µm.
Weller® FT offers EPA (Efficiency Particulate Air) filters of class E
12, medium filtration efficiency 99,5%.
Wide band gas filter
Wide band gas filter
For cleaning harmful fumes and vapours. The Weller® FT wide
band gas filter consists of 50% active carbon and 50% Puratex.
Harmful gases with a high molecular weight are cleaned by the
active carbon. Puratex it suitable for absorbing gases of lower
molecular weight. Because of its composition, Puratex is able to
convert a large number of chemical pollutants by means of mole-
cular modification into non-polluting gases.
3. Gas filter (option)
The gas filter is used for extracting adhesive fumes and solvents.
Experience has shown that filtering suspended particles is not so
vital in this respect. The gas filter is filled with 50% active carbon
and 50% Puratex. The EPA E 12 is omitted.
WFE, WFE P WFE 2X Zero Smog 20T
Zero Smog 4V
Zero Smog 6V
WFE 2ES
www.labem.pl
100
ESD
ESD
Set up your volume extraction solution
with our configurator
www.weller.eu
Weller® FT Easy-Click-60 Example for installation
Tip Extraction
Less investment per work place
Collect pollution direct at source
Up to 20 collection points with one system
(200 m apart)
Ergonomic friendly with easy access to work piece
No noise
Minimal air movement
Weller® FT FE (Fume extraction) soldering irons have a
smoke tube integrated into the handle. When soldering the
tube is positioned directly above the joint and collects any
fumes produced. Fume extraction attachments can be retro
fitted to non fume extraction
Weller FT offers two extraction solutions:
Volume Extraction
Larger areas can be covered
Low maintenance
Mobile
Quick & easy installation
Economic for 1 to 8 work places
Remote control
More suitable for applications involving, for example, solder
baths, hot air soldering, micro solders and gluing work.
Weller® FT offers various mobile systems that purify the air up
to a maximum of 8 workplaces.
Solutions for Fume Extraction – For clean air
www.labem.pl
101
Fume Extraction
The tube is positioned directly above the joint and
collects any fumes produced.
High underpressure
Low volume flow rate
For 1 FE soldering iron
- Volume flow rate = 1 – 1,5 [m3/h]
- Underpressure = 10.000 [Pa]
For 25 soldering irons
- Volume flow rate = 25 – 30 [m3/h]
- Underpressure = 10.000 [Pa]
For 1 extraction arm ø 60
- Volume flow rate = 50 – 80 [m3/h]
- Underpressure = 300 – 700 [Pa]
For 6 extraction arms ø 60
- Volume flow rate = 300 – 480 [m3/h]
- Underpressure = 300 – 700 [Pa]
Volume extraction with extraction arms
Low underpressure
High volume flow rate
Weller® FT Easy-Click-60 connection elements for quick and easy
installation for volume extraction
www.labem.pl
102
WFE 2XWFE 2ES
Pocket filter
for pre filter box
Exhaust hood
Funnel nozzle
Sloped nozzle
Adapter
40/60
Filter for WFE 2X
T005 36 590 99
KIT 1 WF 60KIT 1 WF 32KIT 1 WF
Funnel
KIT 1 S WFKIT 1 WF Nozzle
sloped 60 mm
Extraction arms Sets
Accessories Installation
AccessorySloped nozzle
Extraction hose
1 m, 3 m, 5 m
WFV Stop valveAdapter Kit
50-60 mm
Extraction arm 32
mm incl. nozzle
Extraction arm
Remote control
Hanging deviar
Pre filter box
Trolley
with wheels
Spare filter
EPA Filter H12
and active carbon
T005 87 627 01
Set (M 5 + H 12)
Fine dust filter M 5
T005 87 627 03
Volume Extraction
www.labem.pl
103
Zero Smog 6VZero Smog 4V
Pre filter box
Pocket filter F7
Filtering for
sticky particles
Filter
Hose connector,
straight
Hose connector,
angle
T-piece with 2 male
and 1 female adapter
Male adapterFemale adapter
End cap
Adapter
Remote control Spare filter
Compact filter
for adhesive fumes
T005 87 358 95 (2S, 4V)
T005 87 358 35 (4S, 6V)
Compact filter
T005 87 359 36 (2S, 4V)
T005 87 358 38 (4S, 6V)
Fine dust filter F 7
T005 87 359 38 (2S, 4V)
T005 87 358 36 (4S, 6V)
Fine dust filter M 5
T005 87 359 37 (2S, 4V)
T005 87 358 37 (4S, 6V)
Easy-Click 60,
60 mm
ø 75 mm on Easy-Click 60
Fume Extraction
WX
Connection cable
T005 87 647 10
WX Adapter for
Remote control
T005 87 627 24
www.labem.pl
104
WFE 2XWFE 2ES
Dimensions L x B x H (mm): 320 x 320 x 395 460 x 610 x 210
Weight 9 kg 15 kg
Voltage 230V, 50Hz / 120 V, 60 Hz 100-240 V, 60 Hz
Sound level in 1m 55 dB (A) 54 dB (A)
Electrical power 115 VA 175 VA
Max. vacuum 1800 Pa 2.300 Pa
Max. capacity 180 m3/h 100 m3/h
Fine dust filter Fine dust filter M 5 Fine dust filter F 7
Filter EPA Filter E 12 and active carbon Compact filter EPA filter E 12
(*Set incl. filter M 5) and 50% active carbon, 50% Puratex
Technical data
Volume Extraction
www.labem.pl
105
Zero Smog 6VZero Smog 4V
Fume Extraction
Dimensions L x B x H (mm): 320 x 320 x 395 450 x 450 x 650
Weight 19 kg 40 kg
Voltage 230 V / 50 Hz (120 V / 60 Hz) 230 V / 50 Hz
Sound level in 1m 48 dB (A) 51 dB (A)
Electrical power 275 VA 460 VA
Max. vacuum 2700 Pa 2800 Pa
Max. capacity 230 m3/h 615 m3/h
Fine dust filter Fine dust filter F 7 Fine dust filter F 7
Filter Compact filter EPA filter E 12 Compact filter EPA filter E 12
(50% active carbon, 50% Puratex) (50% active carbon, 50% Puratex)
www.labem.pl
106
ESD
Includes adhesive fume filter
For upto 4 workplaces
Zero Smog 4V
Order-no. Model Description
T005 36 616 99 Zero Smog 4V Mobile fume extraction unit 230 V / 50 Hz
for volume extraction with built in turbine with
adhesive fume filter
Scope of supply:
Fume extraction unit 230 V / 50 Hz
Filter for adhesive fumes (wide band gas filter
50% active carbon / 50% Puratex)
Fine dust filter F 7
For applications where volume extraction is more suitable, e.g. solder baths, hot air soldering, micro solders and
gluing work, Weller offers the mobile systems Zero Smog 4V and Zero Smog 6V. The units purify the air upto 8
workplaces. A wide range of accessory is available for each system.
For upto 4 workplaces
Zero Smog 4V
Order-no. Model Description
T005 36 606 99 Zero Smog 4V Mobile fume extraction unit 230 V / 50 Hz,
for volume extraction with built in turbine
Scope of supply:
Fume extraction unit 230 V / 50 Hz
Filter (EPA filter E 12 and wide band gas filter
50% active carbon / 50% Puratex)
Fine dust filter F 7
Low maintenance
Flexible
Quick and easy installation
For different applications
Volume ExtractionVolume Extraction
Constant flow control (CFC)
Efficiency test via USB port
Acoustical and optical filter alarm
Constant flow control (CFC)
Efficiency test via USB port
Acoustical and optical filter alarm
www.labem.pl
107
For upto 4 workplaces
Set with 2 Extraction arms
and Sloped nozzle
Zero Smog 4V
Kit 2 sloped nozzle
Order-no. Model Description
T005 36 656 99 Zero Smog 4V Mobile fume extraction kit 230 V / 50 Hz
Kit 2 for 2 workplaces - upgrading to 4 workplaces
sloped nozzle possible with further accessories
Scope of supply:
T005 36 606 99 Zero Smog 4V Fume extraction unit 230 V / 50 Hz
Compact filter (EPA filter E 12 and wide band gas
filter 50% active carbon / 50% Puratex)
Fine dust filter F 7
2 x T005 36 572 99 KIT 1 WF Sloped 60 for volume extraction
Consists of:
2 x T005 36 578 99 Extraction arm
2 x T005 36 577 99 Sloped nozzle
2 x T005 36 574 99 WFV 60 Stop valve incl. bench mounting brackets
2 x T005 36 575 99 Bench mounting bracket
2 x T005 36 576 99 Extraction hose
For upto 4 workplaces
Set with 1 Extraction arm
and Sloped nozzle
Zero Smog 4V
Kit 1 sloped nozzle
Order-no. Model Description
T005 36 636 99 Zero Smog 4V Mobile fume extraction kit 230 V / 50 Hz
Kit 1 for 1 workplace - upgrading to 4 workplaces
sloped nozzle possible with further accessories
Scope of supply:
T005 36 606 99 Zero Smog 4V Fume extraction unit 230 V / 50 Hz
Compact filter (EPA filter E 12 and wide band gas
filter 50% active carbon / 50% Puratex)
Fine dust filter F 7
T005 36 572 99 Kit 1 WF Sloped 60 for volume extraction
(50% Active carbon , 50% Puratex)
Consists of:
T005 36 578 99 Extraction arm
T005 36 577 99 Sloped nozzle
T005 36 574 99 WFV 60 Stop valve incl. bench mounting brackets
T005 36 575 99 Bench mounting bracket
T005 36 576 99 Extraction hose
Fume Extraction
www.labem.pl
108
Volume Extraction
For upto 4 workplaces
Set with 2 Extraction arm
and funnel nozzle
Zero Smog 4V
Kit 2 Funnel nozzle
Order-no. Model Description
T005 36 646 99 Zero Smog 4V Mobile fume extraction kit 230 V / 50 Hz
Kit 2 for 2 workplace - upgrading to 4 workplaces
Funnel nozzle possible with further accessories
Scope of supply:
T005 36 606 99 Zero Smog 4V Fume extraction unit 230 V / 50 Hz
Compact filter (EPA filter E 12 and wide band gas
filter 50% active carbon / 50% Puratex)
Fine dust filter F 7
2 x T005 36 571 99 KIT 1 WF Funnel 60 for volume extraction
Consists of:
2 x T005 36 578 99 Extraction arm
2 x T005 36 573 99 Funnel nozzle
2 x T005 36 574 99 WFV 60 Stop valve incl. bench mounting brackets
2 x T005 36 575 99 Bench mounting bracket
2 x T005 36 576 99 Extraction hose
For upto 4 workplaces
Set with 1 Extraction arm
and funnel nozzle
Zero Smog 4V
Kit 1 Funnel nozzle
Order-no. Model Description
T005 36 626 99 Zero Smog 4V Mobile fume extraction kit 230 V / 50 Hz
Kit 1 for 1 workplace - upgrading to 4 workplaces
Funnel nozzle possible with further accessories
Scope of supply:
T005 36 606 99 Zero Smog 4V Fume extraction unit 230 V / 50 Hz
Compact filter (EPA filter E 12 and wide band gas
filter 50% active carbon / 50% Puratex)
Fine dust filter F 7
T005 36 571 99 Kit 1 WF Funnel 60 for volume extraction
Consists of:
T005 36 578 99 Extraction arm
T005 36 573 99 Funnel nozzle
T005 36 574 99 WFV 60 Stop valve incl. bench mounting brackets
T005 36 575 99 Bench mounting bracket
T005 36 576 99 Extraction hose
www.labem.pl
109
Fume Extraction
For max. 2 workplaces
Economy solution
WFE 2ES
For max. 2 workplaces
Set with 1 Extraction arm
and Funnel nozzle
Economy solution
WFE 2ES Set
Order-no. Model Description
T005 36 506 99 WFE 2ES Fume extraction unit 230 V
with EPA filter E 12 active filter,
fine dust filter M 5
T005 36 506 70 WFE 2ES WFE 2ES with wide band gas filter
for adhesive fumes
Order-no. Model Description
T005 36 516 89 WFE 2ES Set Mobile solution for volume extraction
for max. 2 workplaces, quick and easy
to install for 1 workplace
Scope of supply:
T005 36 506 99 WFE 2ES Fume extraction unit - Compact filter, consists of:
EPA filter E 12, active carbonate foam,
Fine dust filter M 5
T005 36 571 99 KIT 1 WF Funnel 60 for volume extraction
Consists of:
T005 36 578 99 Extraction arm
T005 36 573 99 Funnel nozzle
T005 36 574 99 WFV 60 Stop valve incl. bench mounting brackets
T005 36 575 99 Bench mounting bracket
T005 36 576 99 Extraction hose
www.labem.pl
110
Volume Extraction
For max. 2 workplaces
WFE 2X
Order-no. Model Description
T005 36 588 99 WFE 2X Fume Extraction Unit 230 V / 50 Hz
for volume extraction
Scope of supply:
WFE 2X Fume extraction unit 100-240 V / 50/60 Hz
Active carbon (EPA Filter E 12, wide band gas filter
(50% Active carbon / 50% Puratex)
For max. 2 workplaces
Set with 1 Extraction arm
and Sloped nozzle
WFE 2X Kit
Order-no. Model Description
T005 36 587 99 WFE 2X Kit 1S Mobile fume extraction unit 100-240 V with
Sloped stativ extraction arm for 1 workplace
Scope of supply:
T005 36 588 99 WFE 2X Fume extraction unit 100-240 V / 50/60 Hz
T005 36 579 99 Easy-Click-60 2 joint aluminium arm with
sloped nozzle, length 1,2 m
Consists of:
T005 36 598 99 Stativ extraction arm without valve
T005 36 575 99 Bench mounting bracket
T005 36 576 99 Extraction hose
T005 36 577 99 Sloped nozzle
Extraction arm 70 cm
For max. 2 workplaces
Set with 1 extraction arm
WFE 2X Kit 1
Order-no. Model Description
T005 36 589 99 WFE 2X Kit 1 Mobile fume extraction unit 100-240 V with
Sloped stativ extraction arm for 1 workplace
Scope of supply:
T005 36 588 99 WFE 2X Fume extraction unit 100-240 V / 50/60 Hz
T005 36 719 99 in the scope of supply
Consists of:
Stop valve
Bench mounting bracket
Extraction hose flexible 3 m
Extraction arm ø 60 mm with funnel
Funnel nozzle
www.labem.pl
111
Fume Extraction
Fume extraction with
adhesive fume filter
For upto 6 workplaces
1 connection included
Further connections must
be ordered separately
Zero Smog 6V
For upto 6 workplaces
1 connection included
Further connections must
be ordered separately
Zero Smog 6V
Order-no. Model Description
T005 36 667 99 Zero Smog 6V Mobile fume extraction unit 230 V / 50 Hz,
for volume extraction with built in turbine and
adhesive fume filter
Scope of supply:
Fume extraction unit 230 V / 50 Hz
T005 87 358 35 Compact filter for adhesive fumes
(wide band gas filter 50% active carbon / 50% Puratex)
T005 87 358 37 Fine dust filter F 7
Order-no. Model Description
T005 36 666 99 Zero Smog 6V Mobile fume extraction unit 230 V / 50 Hz,
for volume extraction with built in turbine
Scope of supply:
Fume extraction unit 230 V / 50 Hz
T005 87 358 38 Compact filter, consists of EPA filter E 12 and wide
band gas filter (50% Active carbon, 50% Puratex)
T005 87 358 37 Fine dust filter F 7
Constant flow control (CFC)
Efficiency test via USB port
Acoustical and optical filter alarm
Constant flow control (CFC)
Efficiency test via USB port
Acoustical and optical filter alarm
www.labem.pl
112
ESD
Accessoires Volume Extraction: Extraction Arm Sets
With sloped nozzle
Easy Click 60
Kit 1 WF Nozzle
Order-no. Model Description
T005 36 572 99 Kit 1 WF Easy-Click-60 Extraction arm with sloped nozzle,
60 mm, length 1 m
Consists of:
T005 36 574 99 Stop valve with bench mounting brackets
T005 36 576 99 Extraction hose flexible 3 m
T005 36 578 99 Extraction arm ø 60 mm
T005 36 577 99 Sloped nozzle
With funnel
Easy Click 60
Kit 1 WF Funnel
Order-no. Model Description
T005 36 571 99 Kit 1 WF Easy-Click-60 Extraction arm with funnel,
width 230 mm, height 100 mm, Set flexible,
Ø 60 mm, length 1 m
Consists of:
T005 36 574 99 Stop valve with bench mounting brackets
T005 36 576 99 Extraction hose flexible 3 m
T005 36 578 99 Extraction arm ø 60 mm
T005 36 573 99 Funnel nozzle
Microscope extraction arm
With sloped nozzle
Easy Click 60
Kit 1 WF 32
Order-no. Model Description
T005 87 627 70 Kit 1 WF 32 Easy-Click-60 Microscope Extraction arm Ø 32 mm,
Set flexible, length 1 m
Consists of:
T005 36 574 99 Stop valve with bench mounting brackets
T005 36 576 99 Extraction hose flexible 3 m
T005 36 580 99 Extraction arm ø 32 mm
www.labem.pl
113
With funnel nozzle
With 1 joint arms
Easy Click 60
Kit 1S WF Funnel
Order-no. Model Description
T005 87 627 63 Kit 1S WF Easy-Click-60 Extraction arm with funnel nozzle
funnel nozzle with stop valve, length 1,20 m
Consists of:
T005 87 627 47 1 joint arm with stop valve and bench
mounting brackets
T005 36 576 99 Extraction hose flexible 3 m
Extraction arm ø 60 mm, 0,7 m
T005 36 573 99 Funnel nozzle
With sloped nozzle
With 2 joint arms
Easy Click 60
Kit 1S WF Nozzle
Order-no. Model Description
T005 36 579 99 Kit 1S WF Easy-Click-60 2 joint aluminium arm with sloped
sloped nozzle nozzle, length 1,5 m
Consists of:
T005 36 598 99 2 joint arms
T005 36 575 99 Bench mounting brackets
T005 36 576 99 Extraction hose flexible 3 m
Extraction arm ø 60 mm, 0,7 m
T005 36 577 99 Sloped nozzle
Fume Extraction
www.labem.pl
114
ESD
ESD
ESD
Easy Click 60
Joint extraction arm
Order-no. Description
T005 36 598 99 Aluminium stativ extraction arm, ESD safe
Easy Click 60
Extraction arm
Order-no. Description
T005 36 578 99 Extraction arm, flexible, Ø 60 mm for sloped
and funnel nozzles, length 1 m
T005 87 627 77 Extraction arm, flexible, Ø 60 mm for sloped und
and funnel nozzles, length 1,5 m.
on request Extraction arm, flexible, Ø 60 mm for sloped and
funnel nozzles, length 0,7 m
Ø 32 mm
Easy Click 60
WF 32
Order-no. Description
T005 36 580 99 ESD microscope extraction arm, flexible, Ø 32 mm
Accessories Volume Extraction: Extraction Arms
Easy Click 60
Joint extraction arm
Order-no. Description
T005 87 627 47 Aluminium stativ extraction arm ESD safe.
With single pivot arm
With dual pivot arm
www.labem.pl
115
300 mm
200 mm
100 mm
0 mm
100 mm
200 mm
300 mm
300 mm
200 mm
100 mm
0 mm
100 mm
200 mm
300 mm
150 mm
300 mm
200 mm
100 mm
0 mm
100 mm
200 mm
300 mm
300 mm
200 mm
100 mm
0 mm
100 mm
200 mm
300 mm
150 mm
300 mm
200 mm
100 mm
0 mm
100 mm
200 mm
300 mm
300 mm
200 mm
100 mm
0 mm
100 mm
200 mm
300 mm
150 mm
300 mm
200 mm
100 mm
100 mm
200 mm
300 mm
21
Exhaust hood
Bestell-Nr. Beschreibung
T005 87 358 45 Exhaust hood, 200 x 100 mm (7.87 x 3.93 in),
recommended for use with hot air soldering
operations uses extraction hose 60. Metal black.
Order-no. Description
1 T005 87 359 09 For WFE 2S, WFE 4S, Zero Smog 4V,
WFE 20D, Zero Smog 20T
2 T005 36 593 99 For WFE 2X
RS 232
Interface cable
Order-no. Description
T005 31 191 99 Interface cable RS 232, 2 m (78.74 in) for remote
control or monitoring by PC (type 1:1)
(T005 87 359 09)
Remote control
Easy Click 60
Sloped nozzle
Order-no. Model Description
T005 36 577 99 WF 60 Sloped nozzle for flexible extraction arm
Easy Click 60
Funnel nozzle
Order-no. Model Description
T005 36 573 99 WF 60 Funnel nozzle for flexible extraction arm,
width 230 mm, high 100 mm
Fume Extraction
Order-no. Description
T005 87 627 24 Adapter Remote control Zero Smog 4V
Order-no. Description
T005 87 647 10 Cable WX
Connection table see page 103
www.labem.pl
116
For WFE 2X
Hanging Bracket
for WFE 2X
Order-no. Description
T005 36 591 99 Hanging Bracket for WFE 2X.
For fixing WFE 2X on the work table.
Pre filter box
Order-no. Description
T005 87 627 57 Pre filter box for WFE 2X,
Pre filter for large fine dust quantities
T005 87 627 58 Pocket filtering F 7 for Pre filter box (5 pieces)
Accessories Volume Extraction
www.labem.pl
117
Fume Extraction
For Zero Smog 4V
Zero Smog 6V
For Zero Smog 6V
For WFE 2X
For mobile use
Exhaust connector
Order-no. Description
T005 87 359 15 Exhaust connector DN 75
for WFE 2S, Zero Smog 4V, Zero Smog 6V
and WFE 4S
Exhaust connector
Order-no. Description
T005 87 358 40 Exhaust connector DN 100 for Zero Smog 6V
and WFE 4S
Trolley with wheels
Order-no. Description
T005 36 592 99 Trolley with wheels for WFE 2X
www.labem.pl
118
ESD
Extension hose 60
Sold by metre
Order-no. Description
T005 87 620 36 Extension hose, heavy construction,
sold by metre (max. length 15 m)
Order-no. Description
T005 87 627 55 Male adapter for hose extension, Ø 60 mm
Easy Click 60
Male adapter
Easy Click 60
Female adapter
Order-no. Description
T005 87 627 72 Female adapter for installation e.g. stop valve on
fume extraction units
Easy Click 60
Extension hose
1 m, 3 m, 5 m
Order-no. Description
T005 87 354 27 Extension hose 1 m
T005 36 576 99 Extension hose 3 m
T005 87 627 56 Extension hose 5 m
Accessories Installation Volume Extraction
Hose connection
60 mm
Order-no. Description
T005 87 627 68 Hose connection 60 mm for flexible hose,
sold by the metre T005 87 620 36.
www.labem.pl
119
Fume Extraction
Easy Click 60
WFV 60 Stop valve
Order-no. Description
T005 36 574 99 WFV 60 Stop valve incl. bench mounting brackets
Easy Click 60
Hose connector, straight
Order-no. Description
T005 87 627 67 Hose connector, straight for WFE 2S / WFE 4S,
Zero Smog 4V / Zero Smog 6V and pre filter box
Easy Click 60
Hose connector,
angle 90° Order-no. Description
T005 87 627 69 Hose connector, angle 90° for WFE 2S / WFE 4S,
Zero Smog 4V / Zero Smog 6V and pre filter box
Easy Click 60
WFV 60 A
Order-no. Description
T005 87 627 46 WFV 60 A Stop valve 230 V
Easy Click 60
WFV 60
Stop valve
Order-no. Description
T005 87 627 65 WFV 60 Stop valve for extraction arm
Easy Click 60
Butterfly valve
Spare Order-no. Description
T005 87 628 08 Butterfly valve for WFV 60 stop valve
www.labem.pl
120
Order-no. Description
T005 87 627 53 Hose adapter for WFE 2ES
–with Silicon O-Ring, Ø 50 mm
Hose adapter
ø 50 mm
Easy Click 60
End Cap Order-no. Description
T005 87 627 74 End Cap 60 mm click connections
Easy Click 60
T-piece
Order-no. Description
T005 87 627 66 T-piece with 2 male connections and
1 female connection
Accessories Installation Volume Extraction
Bench mounting
brackets
Order-no. Description
T005 36 575 99 Bench mounting brackets (2 clamp)
www.labem.pl
121
Fume Extraction
Adapter
40/60
Order-no. Description
T005 87 627 50 40/60 Adapter for Easy Click 60 Extraction arms
on 50 mm WFEMP50 power socket
Order-no. Description
T005 87 627 71 Adapter ø 75 mm for Easy-Click 60
Adapter
ø 75 mm
Order-no. Description
T005 87 358 79 Hose clamps 50 – 70 mm, 2 pieces,
for securing extraction hose 50 mm
Hose clamp
50 – 70 mm
www.labem.pl
122
F5
F7
Accessories Fume Extraction
Order-no. Description
T005 87 358 95 Compact filter for adhesive fume, wide band gas
filter (50% active carbon, 50% Puratex)
Order-no. Description
T005 87 627 01 Filterset E 12 with 10 Prefilter M 5,
EPA Filter E 12, wide band gas filter
(10% active carbon)
For WFE 2ES,
WFE 2CS
Filterset E 12
Wide band gas filter
For WFE 2S,
Zero Smog 4V
From October 2013 supplied
in cardboard housing
For WFE 2S,
Zero Smog 4V
Compact filter
Order-no. Description
T005 87 359 36 Compact filter for WFE 2S, Zero Smog 4V,
EPA filter E 12 EN 1822
and 50% active carbon, 50% Puratex
For WFE 2S,
Zero Smog 4V
10 pieces
Fine dust filter F 7
Order-no. Description
T005 87 359 38 Fine dust filter for WFE 2S, Zero Smog 4V
For WFE 2S,
Zero Smog 4V
10 pieces
Fine dust filter M 5
Order-no. Description
T005 87 359 37 Fine dust filter for WFE 2S, Zero Smog 4V
www.labem.pl
123
F5
Fume Extraction
For Pre filter box
For WFE 2S / WFE 4S,
Zero Smog 4V /
Zero Smog 6V
Filtring ash
Order-no. Description
T005 87 359 24 Filtering fine dust for sticky particles
(e.g. large quantities of liquid flux)
Order-no. Description
T005 87 627 03 Fine dust filter M 5
For WFE 2S / WFE 4S,
Zero Smog 4V /
Zero Smog 6V
Pocket filter F 7
Order-no. Description
T005 87 358 60 Pocket filter F 7.
For applications with a high fine dust rate.
For Pre filter box WFE 2X
Pocket filter F 7
for WFE 2X
Order-no. Description
T005 87 627 58 Pocket filter for Pre filter box for WFE 2X
For WFE 2X
Compact filter
Order-no. Description
T005 36 590 99 EPA Filter E 12, wide band gas filter
(50% active carbon / 50% Puratex)
For WFE 2ES / CS
10 pieces
Fine dust filter M 5
www.labem.pl
124
F5
F7
Order-no. Description
T005 87 358 35 Compact filter for adhesive fumes,
wide band gas filter
(50% active carbon, 50% Puratex)
Adhesive fume filter
Order-no. Description
T005 87 358 38 Compact filter
EPA filter E 12, wide band gas filter
(50% active carbon, 50% Puratex)
Order-no. Description
T005 87 358 36 Fine dust filter F 7
Order-no. Description
T005 87 358 37 Fine dust filter M 5
For Zero Smog 6V / WFE 4S
For adhesive fumes
For Zero Smog 20T / WFE 20D
and Zero Smog 6V / WFE 4S
Compact filter
For Zero Smog 20T / WFE 20D
and Zero Smog 6V / WFE 4S
10 pieces
Fine dust filter F 7
For Zero Smog 20T / WFE 20D
and Zero Smog 6V / WFE 4S
10 pieces
Fine dust filter M 5
Accessories Fume Extraction
www.labem.pl
125
Fume Extraction
Order-no. Description
T005 87 358 63 Adapter PEHD pipe system 75 to pipe system 50,
with seals 2 seals
T005 87 358 56 Adapter PEHD pipe system 75 to pipe system 50,
without seals
Adapter
Order-no. Description
T005 87 358 64 Pipe clamps, PE, grey
Pipe clamps
Order-no. Description
T005 87 358 55 End seal, PE, transparent
End seal
Order-no. Description
T005 87 358 71 T-piece, 2 x 90°, 0,5 m, with 3 seals, plastic,
PEHD black
T-piece
2 x 90°
Order-no. Description
T005 87 358 69 Right angle pipe, 90°, 0,2 m, with seal at one end,
plastic, PEHD black
Right angle pipe 90°
Order-no. Description
T005 87 358 70 Pipe 2 m, with seal at one end, plastic,
PEHD black
Pipe 2 m
Volume extraction systems require a large volume of air to be extracted and the level of vacuum is of lesser impor-
tance. This means that a relatively large diameter pipe system is required. If the pipe diameter was too small the
flow resistance would increase and extraction capacity reduced. The pipe system 75 allows installations up to 30 m
with the WFE 4S uses in a stand alone system. The pipe sections are designed to stick together and have internal
sealing bushes. *PEHD = Polyethylen high density, PE = Polyethylen.
Pipe System 75 Volume Extraction
www.labem.pl
126
Top
Oben
Top
Oben
Top
Oben
Top
Oben
WFE WFE P
KHE 81
Pipe system 50 and Accessories
Attachments and
Accessories
FE Soldering Irons
FE 80
HT Soldering tips
Locking clip
Extraction hose 5 mm
FE-Clip-Set Pipe Ø 4,5 mm
FE-Clip-Set Pipe Ø 6mm
FE-Attachment
Pipe 2 m
Branch
2 x 45°, 0,3 m
T-piece 2 x 90°, 0,5 m
Pipe clampsEnd sealDouble socket
Right angle pipe 0°, 0,2 m
FE-Attachment
FE 75
LT Soldering tips
Safety restsSpare filter
Fine dust filter F 7
Compact filter
for adhesive fumes
Compact filter
KHE / KHP 81
Additional
safety rest
KHP 81Compressed air
cleaning filter
Tip Extraction
www.labem.pl
127
Zero Smog 20T
Fume Extraction
Interface cable Remote control Exhaust connector
Accessories Spare filter
Compact filter
Fine dust filter F 7
DN 100
End cap
Connetion element
Connection nipple for 5 mm hose of
FE iron for direct connection to pipe system
Adapter DN 17 for connection
extension hose 17 with 5 mm
hose of FE iron
Connection nipple DN 17 +
Nut G 3/8“ for connection nipple
Extraction hose 40,
sold by metre
Extension hose
5,0 m, DN 17
Extraction hose 40,
1 m complete with
2 connecting elements
Fine dust filter M 5
WX
Connection cable
T005 87 647 10
WX Adapter for
Zero Smog 20T
with remote control
T005 87 627 24
www.labem.pl
128
low sound level
low sound level
ESD
Aspirazione dei fumi in punta
For 2 soldering irons
With built in pump
For 2 soldering irons
Compressed air operated
WFE P
Order-no. Model Description
T005 36 386 99 WFE P Portable fume extraction unit for tip suction with
built in pump (do not use for 24 h continuous
operation)
Scope of supply:
Fume extraction unit 230 V / 50 Hz
Compact filter (EPA filter E 12 and wide band gas filter
50% active carbon / 50% Puratex)
Fine dust filter F 7
The Weller FT Zero Smog Systems put an end to air pollution caused by soldering, adhesives and laser work. In all
of these applications fumes or fine particles are released into the work place atmosphere which are hazardous to
the staff exposed to them. The Weller Zero Smog Systems’ combination of pumps, electronic controls and filters
removes this hazard.
Tip Extraction
Weller FT FE soldering irons have an integral smoke tube mounted in the handle. It is positioned directly above the
joint during the soldering process to collect any fumes generated. Fume extraction irons can be connected to Weller
Zero Smog Systems WFE and WFE P bench mounted units driving up to 2 irons or Zero Smog 20T mobile unit driving
up to 20 irons. Fume extraction attachments can be retro fitted to non fume extraction Weller soldering irons.
WFE
Order-no. Model Description
T005 36 402 99 WFE Portable fume extraction unit for tip suction,
compressed air operated
Scope of supply:
Fume extraction unit
Compressed air cleaning filter
Compact filter (EPA filter E 12 and wide band gas filter
50% active carbon / 50% Puratex)
Fine dust filter F 7
Tip Extraction
www.labem.pl
129
low sound level
Fume Extraction
For 20 soldering irons
Zero Smog 20T
Order-no. Model Description
T005 36 4706 99 Zero Smog 20T Fume extraction unit 230 V / 50 Hz,
for tip suction with built in turbine
Scope of supply:
Fume extraction unit 230 V / 50 Hz
Compact filter (EPA filter E12 and wide band gas filter
50% active carbon / 50% Puratex)
Fine dust filter F 7
Specifications Zero Smog 20T
Dimensions L x B x H 450 x 450 x 695 mm
Weight 45 kg
Mains supply voltage T005 36 706 99: 230 V / 50 Hz
T005 36 702 99: 120 V / 60 Hz
Electrical power rating 530 VA
Fuse T 3, 15 A
Maximum vacuum 10.000 Pa
Maximum quantity supplied 100 m3/h
Noise emission level 51 dB(A)
Pre filter Stage 1 Pre filter mat class F7
Combined filter Stage 2,3 Combined E12 high efficiency submicron filter
(99.95 % particle separation upto 0.12 µm) and wide
band gas filter (50 % activated carbon, 50 % Puratex)
RS232 port All system functions can be operated and remotely
monitored via the RS232 port.
USB port The USB port can be used to load firmware updates,
run efficiency tests and log data. Do not leave the USB
medium inserted for longer than 2 minutes. After this
time expires, the USB module will switch off
automatically.
www.labem.pl
130
Accessories Tip Extraction
Safety rest KH 20
Order-no. Description
T005 15 020 99 KH 20 Safety rest
Order-no. Model Description
T005 33 151 99 FE 75 Set FE-Soldering iron Set 80 W / 24 V
Scope of supply:
T005 29 166 99 FE 75 FE-Soldering iron 80 W / 24 V with soldering tip LT B
T005 15 020 99 KH 20 Safety rest
T005 87 447 28 Funnel for FE 75
T005 25 409 99 Cleaning brush for FE tube
Order-no. Model Description
T005 26 162 99 FE 80 FE-Soldering iron 80 W / 24 V
Scope of supply:
FE 80 FE-Soldering iron 80 W / 24 V with soldering tip HT B
T005 87 337 59 Funnel for FE 80
T005 25 409 99 Cleaning brush for FE tube
Please order related safety rest KH 20 separately!
Extraction hose
Order-no. Description
T005 25 410 00 Extraction hose (spare), by metre, 5 mm
Locking clip
Accessories for FE-soldering irons
FE 80
FE 75 Set
Accessories Tip Extraction
Order-no. Description
T005 36 352 99 Locking clip for extraction hose
www.labem.pl
131
Fume ExtractionFume Extraction
With Stop+Go function
Safety rest WDH 50
Order-no. Model Description
T005 15 156 99 WDH 50 Safety rest with Stop+Go function for WMRP iron
with FE-attachment
Universal FE attachments
For Weller soldering irons WP 80, WSP 80, WMP, WMRP, MLR 21 or soldering irons with handle diameter Ø 10-13 mm.
Clip will be fasten with an O-ring to the soldering iron.
FE attachments
A range of FE attachments is available to fit to Weller soldering and desoldering irons to convert standard
products to fume extraction versions. The attachments are supplied with all necessary fittings and hoses.
The performance of the retro fitted tools is not affected.
Order-no. Description
T005 25 125 99 FE-attachment for LR 21, LR 82, TCPS, W 61, W 101,
WP 200, WXP 200
WSP 150
T005 28 126 99 FE-attachment for WSF 80D5/D8 for AKS safety rest
T005 13 125 99 FE-attachment for DS 22, DS 80 and DSX 80 desoldering iron
Fume Extraction
Order-no. Description
T005 29 186 99 FE-attachment with tube Ø 6 mm
for WSP 80, WP 80, MLR 21, WMP, WP 120
T005 29 214 99 FE-attachment with tube, Ø 6 mm
for WP 65 and WP 120
T005 29 185 99 FE-attachment with tube Ø 4,5 mm, for WMRP and WSP 80,
WP 80, MLR 21, MLR 80, WMP, for fine soldering applications
T005 87 448 75 FE-Clip-Set for FE-attachment, tube Ø 4,5 mm
T005 87 448 76 FE-Clip-Set for FE-attachment, tube Ø 6,0 mm
T005 87 657 98 FE-Add-on kit, attachment tube Ø 6 mm WXP 120
T005 87 657 99 FE-Add-on kit, attachment tube Ø 6 mm WXP 65
www.labem.pl
132
Top
Oben
Top
Oben
Top
Oben
Top
Oben
For WFE and WFE P
For WFE and WFE P
Order-no. Description
T005 36 410 99 Compact filter (EPA filter E 12 and wide band
gas filter 50% active carbon / 50% Puratex)
For adhesive fumes
For WFE and WFE P
For Zero Smog 20T / WFE 20D
Compact filter
Order-no. Description
T005 87 358 38 Compact filter (EPA filter E 12 and wide band
gas filter 50% active carbon / 50% Puratex)
Order-no. Description
T005 36 407 99 Compact filter (EPA filter E 12 and wide band
gas filter 100% active carbon
Compact filter
For WFE and WFE P
3 pieces
Order-no. Description
T005 36 421 99 Fine dust filter F7
Compact filter
Fine dust filter F 7
Compressed air
cleaning filter
Order-no. Description
T005 87 357 57 Compressed air cleaning filter (active carbon)
Accessories Tip Extraction
www.labem.pl
133
F7
F5
Fume Extraction
For Zero Smog 20T / WFE 20D
10 pieces
Fine dust filter M 5
Order-no. Description
T005 87 358 37 Fine dust filter M 5 for Zero Smog 20T / WFD 20D
ForZero Smog 20T / WFE 20D
10 pieces
Fine dust filter F 7
Order-no. Description
T005 87 358 36 Fine dust filter F 7 for Zero Smog 20T / WFD 20D
Branch 50
2 x 45°
Order-no. Description
T005 36 321 99 Branch 2 x 45°, 0,3 m, with 2 seals, plastic, PEHD black
T-piece 50
2 x 90°
Order-no. Description
T005 36 344 99 T-piece 2 x 90°, 0,5 m, with 3 seals, plastic, PEHD black
Right angle
pipe 50, 90°
Order-no. Description
T005 36 322 99 Right angle pipe 90°, 0,2 m, with seal at one end, PEHD black
Pipe 50, 2 m
Order-no. Description
T005 36 323 99 Pipe 2 m, with seal at one end, plastic, PEHD black
Tip extraction systems demand a high value and constant level of vacuum across the installation, the volume of air
extracted is of lesser importance. To achieve this it is necessary to use a pipe system with Zero Smog 20T small
diameter. The Weller FT pipe system 50 allows extraction installations of up to 200 m when used with the WFE 20D
unit in a stand alone system. The pipe sections are designed to stick together and have internal sealing bushes.
In a central system, the FE irons are connected directly to the fume extraction units.
*PEHD = Polyethylen high density
Pipe System 50
www.labem.pl
134
Order-no. Description
T005 36 324 99 End seal, PE, transparent
Order-no. Description
T005 36 329 99 Pipe clamps for 50 pipe system, grey
Order-no. Description
T005 36 319 99 Double socket for pipe system 50, PEHD black
End seal 50
Pipe clamps 50
Extraction hose 40
Order-no. Description
T005 36 414 00 Extraction hose 40, Ø 40 mm,
without connecting elements, sold by metre
Extraction hose 40
Order-no. Description
T005 36 316 99 Extraction hose 40, 1 m, Ø 40 mm,
complete with 2 connecting elements
Double socket 50
Accessories Tip Extraction
www.labem.pl
135
Fume Extraction
Connection
nipple
End cap
Extension hose
DN 17
Connection
element 40-50
Order-no. Description
T005 36 326 99 Extension hose DN 17, 5 m
Order-no. Description
T005 36 415 99 Connection element 40-50
Order-no. Description
T005 87 358 65 Connection nipple on extension hose DN 17 (T005 36 326 99)
Order-no. Description
T005 36 343 99 Adapter for connection extension hose 17 with 5 mm
extraction hose (T005 36 326 99), 5 mm
Order-no. Description
T005 87 350 50 End cap for connection nipple (T005 36 338 99)
Order-no. Description
T005 36 338 99 Connection nipple for extraction hose 5 mm (T005 25 410 00)
Order-no. Description
T005 87 628 10 Connection adapter for Zero Smog 20 T
Connection
adapter
Adapter
Order-no. Description
T005 87 358 66 Nut G 3/8“ for connection nipple (T005 87 358 99), 3 pieces
Nut G 3/8“
www.labem.pl
136
ESD
The Weller safety rests with Stop+Go function are recommended accessories for FE irons using
the WFE or WFE P extraction units. A fibre optic sensor switches the extraction unit on when the
FE iron is removed from the safety rest and when the FE iron is replaced in the safety rest, after
a short delay to gather the fumes from any solder on the tip it switches the unit off. This reduces
running costs.
KHP 81
Order-no. Model Description
T005 15 168 99 KHP 81 Basic unit electric (for WFE) safety rest with
Stop+Go function with fibre optic sensor for
WSP 80, WP 80, WP 120
KHE/P
Order-no. Model Description
T005 15 080 99 KHE/P Second safety rest with fibre optic sensor for
extending to 2 workplaces
KHE
Order-no. Model Description
T005 15 076 99 KHE Basic unit electric (for WFE P) safety rest with
Stop+Go function with fibre optic sensor for
FE 75 and FE 80
KHP
Order-no. Model Description
T005 15 086 99 KHP Basic unit pneumatic (for WFE) safety rest with
Stop+Go function with fibre optic sensor for
FE 75 and FE 80
Safety Rests with Stop+Go function for FE Irons with WFE or WFE P
Accessories Tip Extraction
www.labem.pl
137
Fume Extraction
KHE / KHP 81
Order-no. Model Description
T005 15 161 72 WDH 10T OPTO Second safety rest for KHE / KHP with fibre optic
sensor for extending to 2 workplaces
KH 6
Order-no. Model Description
T005 15 006 99 KH 6 Safety rest for FE 75, FE 80
WDH 30
Order-no. Model Description
T005 15 152 99 WDH 30 Safety rest for FE 75, FE 80 and LR 21, LR 82 and
TCPS with FE attachment
KHE 81
Order-no. Model Description
T005 15 167 99 KHE 81 Basic unit electric (for WFE P) safety rest with
Stop+Go function for soldering irons WSP 80,
WP 80, WP 120 with fibre optic sensor
www.labem.pl
Lötstationen
138
Standard safety rest
Weller Safety Rests – Overview
Tools
AK 51 AKT 30 KH 4 KH 6 KH 18 KH 20 KH 20 KH 20 KH 25P KH 27 KHE/KHP KHE 81/ WDH 10 WDH 10T WDH 10P WDH 20 WDH 20T WDH 30 WDH 30T WDH 31 WDH 40 WDH 50 WDH 51 WDH 60 WDH 70 WPH 80 WMRTH
+ FE 75 + FE 80 KHP 81
funnel funnel
Power-Response
WP 65 page 142
WP 120 page 144
WP 200 page 145
WXP 65 page 142
WXP 120 page 143
WXP 200 page 145
Silver-Line
FE 75 page 126 / 130 / 148
FE 80 page 126 / 130 / 149
MPR 80 page 147
WP 80 page 146
WSP 80 page 146
WSP 150 page 147
Active Tip
WMRP page 140
WMRT page 141
WXMP page 140
WXMT page 141
Standard-Line
LR 21 page 149
WTA 50 page 158
Magnastat controlled low voltage soldering irons
TCPS page 150
W 61 page 151
W 101 page 151
Desoldering irons
DSX 80 page 154
DXV 80 page 155
WXDP 120 page 157
DSX 120 page 157
WXDV 120 page 155
Hot air irons
HAP 1 page 158
HAP 200 page 159
HAP 3000 page 70
WXHAP 200 page 159
Inert gas soldering irons
WP 80IG/120IG page 37
Solder feeder system
WSFP 5/8 page 39
Alternative safety restSafety rest with
Stop & Go function
www.labem.pl
139
Accessory
AK 51 AKT 30 KH 4 KH 6 KH 18 KH 20 KH 20 KH 20 KH 25P KH 27 KHE/KHP KHE 81/ WDH 10 WDH 10T WDH 10P WDH 20 WDH 20T WDH 30 WDH 30T WDH 31 WDH 40 WDH 50 WDH 51 WDH 60 WDH 70 WPH 80 WMRTH
+ FE 75 + FE 80 KHP 81
funnel funnel
Power-Response
WP 65 page 142
WP 120 page 144
WP 200 page 145
WXP 65 page 142
WXP 120 page 143
WXP 200 page 145
Silver-Line
FE 75 page 126 / 130 / 148
FE 80 page 126 / 130 / 149
MPR 80 page 147
WP 80 page 146
WSP 80 page 146
WSP 150 page 147
Active Tip
WMRP page 140
WMRT page 141
WXMP page 140
WXMT page 141
Standard-Line
LR 21 page 149
WTA 50 page 158
Magnastat controlled low voltage soldering irons
TCPS page 150
W 61 page 151
W 101 page 151
Desoldering irons
DSX 80 page 154
DXV 80 page 155
WXDP 120 page 157
DSX 120 page 157
WXDV 120 page 155
Hot air irons
HAP 1 page 158
HAP 200 page 159
HAP 3000 page 70
WXHAP 200 page 159
Inert gas soldering irons
WP 80IG/120IG page 37
Solder feeder system
WSFP 5/8 page 39
www.labem.pl
Lötstationen
140
4
3
2
3
2
1
1
ESD
Quick tip exchange without any tools
Extremely short heating time 100°C/sec
Energy saving by standby function
Optimal reaction time
RT Soldering tip series
page 164/165
RT Soldering
tip series
page 164/165
40 W (55 W with RT 11), 12 V
Fine slim soldering iron. Ideal for
microscope work.
High performance by integrated
active soldering tip.
40 W (55 W with RT 11), 12 V
For WX stations
Fine slim soldering iron. Ideal
for microscope work.
High performance by integra-
ted active soldering tip.
WMRP Set
WXMP Set
Accessory
4 T005 87 518 16 Bracket can be plugged sidewards into
the rest and hold 2 RT tips
Order-no. Model Description
T005 29 190 99 WMRP Set Micro soldering iron WMRP with safety rest
Scope of supply
1 T005 29 171 99 WMRP Micro soldering iron WMRP 40 W, 12 V mit
with Active–Tip Heating Technology
2 T005 44 603 99 RT 3 Standard soldering tip, chisel 1,3 x 0,4 mm
3 T005 15 156 99 WDH 50 Safety rest with dry cleaner
Order-no. Model Description
T005 29 204 99 WXMP Set Micro soldering iron WXMP with safety rest
Scope of supply
1 T005 29 203 99 WXMP Micro soldering iron WXMP 40 W, 12 V
with Active–Tip Heating Technology
2 T005 44 603 99 RT 3 Standard soldering tip, chisel 1,3 x 0,4 mm
3 T005 15 171 99 WDH 51 Safety rest with dry cleaner
Optimum for soldering applications
Optimal tool where heating element and sensor are integrated in the soldering tip. By lowering the soldering joint
temperature a faster reaction time is possible. With this tool the performance is exactly at the solder joint.
Active–Tip Heating Technology
www.labem.pl
141
2
2
3
3
1
1
Desoldering Soldering
RTW Soldering
tip series
page 166/167
RTW Soldering
tip series
page 166/167
2 x 40 W, 12 V
For rework stations WR 3M
Slim tweezers. Ideal for
soldering and desoldering of
very small SMD components.
2 x 40 W, 12 V
For WX stations
Slim tweezers. Ideal for
soldering and desoldering of
very small SMD components.
WMRT Set
WXMT Set
Order-no. Model Description
T005 13 173 99 WMRT Set Micro desoldering tweezers WMRT
with safety rest
Scope of supply
1 T005 13 174 99 WMRT Micro desoldering tweezers 2 x 40 W, 12 V
(hand piece without tips)
with Active–Tip Heating Technology
2 T005 44 652 99 RTW 2 Soldering tiplet, 0,7 mm x 0,4 mm, 45°
3 T005 15 146 99 WMRTH Safety rest
Order-no. Model Description
T005 13 178 99 WXMT Set Micro desoldering tweezers WXMT
with safety rest
Scope of supply
1 T005 13 177 99 WXMT Micro desoldering tweezers 2 x 40 W, 12 V
(hand piece without tips) with
Active–Tip Heating Technology
2 T005 44 652 99 RTW 2 Soldering tiplet, 0,7 x 0,4 mm, 45°
3 T005 15 169 99 WDH 60 Safety rest with dry cleaner
www.labem.pl
Lötstationen
142
ESD
3
3
2
2
1
1
Accessory for both sets:
T005 87 657 58 Barrel
XNT Soldering
tip series
page 168/169
XNT Soldering
tip series
page 168/169
65 W, 24 V
Small fast soldering iron
with 65 W. Qualified for
fine solder jobs with high
heating demand.
65 W, 24 V
Small fast soldering iron with
65 W for for WX stations.
Qualified for fine solder jobs
with high heating demand.
WP 65 Set
WXP 65 Set
Beneficial soldering tip prices
Max. heating transfer
Soldering tip in optimized sensor position
Fast reaction time
Order-no. Model Description
T005 29 216 99 WP 65 Set Set Soldering iron WP 65 with safety rest
Scope of supply
1 T005 29 215 99 WP 65 Soldering iron 65 W, 24 V
with Power-Response Heating Technology
2 T005 44 851 99 XNT A Standard soldering tip, Chisel, 1,6 x 0,4 mm
3 T005 15 121 99 WDH 10 Safety rest with dry cleaner
Order-no. Model Description
T005 29 212 99 WXP 65 Set Soldering iron WXP 65 with safety rest
Scope of supply
1 T005 29 211 99 WXP 65 Soldering iron 65 W, 24 V
with Power-Response Heating Technology
2 T005 44 851 99 XNT A Standard soldering tip, Chisel, 1,6 x 0,4 mm
3 T005 15 121 99 WDH 10 Safety rest with dry cleaner
Optional:
T005 29 211 70 WXP 65 Set WXP 65 Set with cable 2,5 m
Power-Response Heating Technology
Due to an optimized sensor position a high perfomance is given. With a wide range of beneficial soldering tips these
tools are an alternative to the micro soldering irons.
Power-Heating Technology
www.labem.pl
143
2
3
1
1
2
Accessory
T005 87 657 11 Barrel
XT Soldering
tip series
page 172/173
120 W, 24 V
Allrounder with 120 watts.
For soldering applications
from small to large compo-
nents with high temperature
demand.
WXP 120 Set
Order-no. Model Description
T005 29 202 99 WXP 120 Set Soldering iron WXP 120 with safety rest
Scope of supply
1 T005 29 201 99 WXP 120 Soldering iron 120 W, 24 V
with Power-Response Heating Technology
2 T005 44 704 99 XT B Standard soldering tip, XT B, Chisel 2,4 x 0,8 mm
3 T005 15 121 99 WDH 10 Safety rest with dry cleaner
Soldering
Order-no. Model Description
T005 29 210 99 WXP 120 Solar Soldering iron WXP 120
Scope of supply
1 T005 29 201 99 WXP 120 Soldering iron 120 W, 24 V
with Power-Response Heating Technology
2 T005 44 730 99 XTDDH 45° Soldering tip 4 mm slopped
Accessory:
T005 87 657 11 Barrel
XT Soldering
tip series
page 172/173
WXP 120 Solar
120 W, 24 V
For solar modules
2,5 m connection cable
www.labem.pl
144
2
3
1
2
1
Accessory
T005 87 657 09 Spare barrel
XT Soldering tip
series page 172/173
120 W, 24 V
Allrounder with 120 watts.
For soldering applications
from small to large compo-
nents with high temperature
demand.
WP 120 Set
Order-no. Model Description
T005 29 194 99 WP 120 Set Soldering iron WP 120 with safety rest
Scope of supply
1 T005 29 193 99 WP 120 Soldering iron 120 W, 24 V
with Power-Response Heating Technology
2 T005 44 704 99 XT B Standard soldering tip, XT B, Chisel 2,4 x 0,8 mm
3 T005 15 161 99 WDH 10T Safety rest with Stop & Go function with dry cleaner
Power-Response Heating Technology
Accessory
T005 87 637 43 Spare barrel
XT Soldering
tip series
page 172/173
120 W, 24 V
For solar modules
2,5 m connection cable
WP 120 Solar
Order-no. Model Description
T005 29 207 99
WP 120 Solar
Soldering iron WP 120 with safety rest,
with 2,5 m connection cable
Scope of supply
1 T005 29 207 99 WP 120 Solar Soldering iron 120 W, 24 V
with Power-Response Heating Technology
2 T005 44 730 99 XTDDH 45° XTDDH 45° 4 mm slopped
www.labem.pl
145
2
3
2
3
1
1
Accessory
T005 87 637 25 Barrel
Accessory
T005 87 637 25 Barrel
XHT Soldering tip
series page 176
XHT Soldering tip
series page 176
200 W, 24 V
High Power soldering iron.
Ideal for applications with
a high temperature demand
e.g. LED backpanels or HF
shieldings
200 W, 24 V
High Power soldering iron
compatible to the WX stations.
Ideal for applications with a
high temperature demand e.g.
LED backpanels or
HF shieldings
WP 200 Set
WXP 200 Set
Order-no. Model Description
T005 29 200 99 WP 200 Set Soldering iron WP 200 with safety rest
Scope of supply
1 T005 29 199 99 WP 200 Soldering iron 200 W, 24 V
with Power-Response Heating Technology
2 T005 44 801 99 XHT D Standard soldering tip, 5,0 x 1,2 mm
3 T005 15 158 99 WDH 31 Safety rest with dry cleaner
Order-no. Model Description
T005 29 206 99 WXP 200 Set Soldering iron WXP 200 with safety rest
Scope of supply
1 T005 29 205 99 WXP 200 Soldering iron 200 W, 24 V
with Power-Response Heating Technology
2 T005 44 801 99 XHT D Standard soldering tip, 5,0 x 1,2 mm
3 T005 15 158 99 WDH 31 Safety rest with dry cleaner
Soldering
www.labem.pl
Lötstationen
146
ESD
12
3
2
3
1
Silver-Line Heating Technology
Accessory
T005 87 448 46 Barrel long, 55 mm
T005 87 448 45 Barrel short, 40 mm
Accessory
T005 87 447 10 Barrel for WSP 80 (spare)
LT Soldering tip
series page 177-180
LT Soldering tip
series page 177-180
80 W, 24 V
Soldering iron WP 80 with
short tip-to-grip design.
Comfortable safety rest with
4 step varying inclination
80 W, 24 V
Fast and precise reach of
soldering temperature.
Slim iron design
For all purpose soldering jobs
WP 80 Set
WSP 80 Set
Effective heat transfer
Wide soldering tip range
Universal use
Order-no. Model Description
T005 29 181 99 WP 80 Set Soldering iron WP 80 with safety rest
Scope of supply
1 T005 29 180 99 WP 80 Soldering iron 80 W, 24 V
with Silver-Line Heating Technology
2 T005 44 405 99 LT B Soldering tip chisel 2,4 x 0,8 mm
3 T005 15 121 99 WDH 10 Safety rest with dry cleaner
Order-no. Model Description
T005 33 125 99 WSP 80 Set Soldering iron WSP 80 with safety rest
Scope of supply
1 T005 29 161 99 WSP 80 Soldering iron 80 W, 24 V
with Silver-Line Heating Technology
2 T005 44 405 99 LT B Soldering tip chisel 2,4 x 0,8 mm
3 T005 15 170 99 KH 18 Safety rest with sponge
Silver-Line Heating Technology
Approved heating technology with effective heat transfer. For all purpose industrial applications.
A wide range of soldering tips are available.
www.labem.pl
147
1
2
3
1
2
3
Accessory
T005 87 447 10 Barrel for WSP 80 (spare)
LT Soldering tip
series page 177-180
LHT Soldering tip
series page 183
80 W, 24 V
Soldering iron with an
adjustable head up to 40°
150 W, 24 V
For soldering applications with
high temperature demand
MPR 80 Set
WSP 150 Set
Order-no. Model Description
T005 33 131 99 MPR 80 Set Soldering iron MPR 80 with safety rest
Scope of supply
1 T005 29 163 99 MPR 80 Soldering iron 80 W, 24 V,
with Silver-Line Heating Technology
2 T005 44 405 99 LT B Soldering tip chisel 2,4 x 0,8 mm
3 T005 15 033 99 KH 25P Safety rest with sponge
Order-no. Model Description
T005 29 189 99 WSP 150 Set Soldering iron WSP 150 with safety rest
Scope of supply
1 T005 29 170 99 WSP 150 Soldering iron 150 W, 24 V
with Silver-Line Heating Technology
2 T005 44 450 99 LHT F Soldering tip chisel 9,3 x 2,0 mm
3 T005 15 152 99 WDH 30 Safety rest with dry cleaner
Soldering
www.labem.pl
148
ESD
1
2
Accessory
T005 87 447 10 Barrel for FE 75 (spare)
LT Soldering tip
series page 177-180
80 W, 24 V
For tip extraction
FE 75 Set
Order-no. Model Description
T005 33 151 99 FE 75 Set Soldering iron FE 75 with safety rest
Scope of supply
1 T005 29 166 99 FE 75 FE-Soldering iron 80 W, 24 V
with Silver-Line Heating Transfer
2 T005 44 405 99 LT B Soldering tip chisel 2,4 x 0,8 mm
3 T005 15 020 99 KH 20 Safety rest with sponge
T005 87 447 28 Funnel for FE 75
T005 25 409 99 Cleaning brush for extraction tube
Weller FE soldering irons are specifically designed for tip extraction applications (tip extraction see page 126).
The fume extraction tube is integrated to the iron and positioned above the soldering tip. Regardless the
iron is ergonomical and allows precise work. The FE soldering irons are controlled electronically and can be
connected to all Weller soldering sations except WX stations. Different perfomances and the wide range of
Weller soldering tips gives a multi-puropse applications to the FE irons. Weller FE soldering irons are delivered
with a 5,0 mm heat resistant fume extraction hose (2,5 mm). Irons are ESD safe.
Silver-Line Heating Technology
www.labem.pl
149
2 1
3
LT Soldering tip
series page 177-180
50 W, 24 V
For standard soldering
applications
LR 21 Set
Order-no. Model Description
T005 29 187 99 LR 21 Set Soldering iron LR 21 with safety rest
Scope of supply
1 T005 25 106 99 LR 21 Soldering iron 50 W, 24 V
with LT-B soldering tip adapter
2 T005 44 415 99 LT M Standard soldering tip, LT M, 3,2 mm X 1,2 mm
3 T005 15 152 99 WDH 30 Safety rest with dry cleaner
80 W, 24 V
For tip extraction
FE 80
Soldering
Order-no. Model Description
T005 26 162 99 FE 80 FE-Soldering iron
Scope of supply
T005 26 162 99 FE 80 FE-Soldering iron 80 W, 24 V
with Silver-Line Heating Transfer
T005 44 261 99 HT 2 Soldering tip
T005 87 337 58 Funnel for FE 80
T005 25 409 99 Cleaning brush for extraction tube
Accessory
T005 15 152 99 WDH 30 Safety rest
HT Soldering tip
series page 185
www.labem.pl
150
TCP 12
3 m cord with battery
clamps e.g. for car battery
LT Soldering tip
series page 177-180
LT Soldering tip
series page 177-180
45 W, 24 V
2 wire cord (4 m) without plug
TCP 42
LT Soldering tip
series page 177-180
50 W, 24 V
2 wire silicone cord
without plug
No grounding possible
TCP 24
LT Soldering tip
series page 177-180
50 W, 24 V
3 wire silicone cord and
plug for Weller WTCP 51
Magnastat soldering station.
Hard grounded
TCPS
Order-no. Model Description
T005 10 053 99 TCP 12 Magnastat Soldering iron 30/40 W, 12/14 V,
with adapter PT 7 (370°C) and soldering tip LT M
Order-no. Model Description
T005 10 055 71 TCP 42 Magnastat Soldering iron 45 W, 24 V,
with adapter PT 7 (370°C) and soldering tip LT M
Order-no. Model Description
T005 10 001 99 TCP 24 Magnastat Soldering iron 50 W, 24 V,
with adapter PT 7 (370°C) and soldering tip LT M
Order-no. Model Description
T00 532 105 99 TCPS Magnastat Soldering iron 50 W, 24 V
with adapter PT 7 (370°C) and soldering tip LT M
Magnastat Controlled Low Voltage Soldering Iron
The Magnastat system operates through a ferro-magnetic senor device which changes its characteristics whe specific
temperatures are reached. This causes it to either attract or repel a permanant magnet which operates a power sup-
ply switch. In this way power to the heating element can be quickly switched on or off to either provide extra power.
Magnastat Soldering Iron
www.labem.pl
151
CT 2 Soldering tip
series page 190
200 W, 230 V
Complete with soldering tip
CT2F7 and safety rest
W 201
Welding wedge spare
page 189
100 W, 230 V
Complete with welding wedge
Teflon coated 50 x 40 x 4 mm,
twist lock and safety rest
W 101SP
CT 6 Soldering
tip series page 189
100 W, 230 V
Complete with soldering tip
CT6E7 and safety rest
W101
CT 5 Soldering
tip series page 188
60 W, 230 V
W 61
Order-no. Model Description
T005 61 056 99 W 201 Line voltage soldering iron 200 W, 230 V,
Magnastat controlled
Order-no. Model Description
T005 61 096 99 W 101SP Line voltage soldering iron 100 W, 230 V,
Magnastat controlled with welding wedge
(260°C-295°C)
Order-no. Model Description
T005 61 046 99 W 101 Low voltage soldering iron 100 W, 230 V,
Magnastat controlled
Order-no. Model Description
T005 61 036 99 W 61 Line voltage soldering iron 60 W, 230 V,
Magnastat controlled
Magnastat controlled line voltage soldering irons
Soldering
www.labem.pl
152
SPI 27
25 W, 230 V
Heating up time approx. 180 sec.
Tip temperature approx. 410°C
SPI 27-Soldering tip
series page 191
SPI 16-Soldering tip
series page 191
15 W, 230 V
Heating up time approx. 180 sec.
Tip temperature approx. 360°C
SPI 16
Order-no. Model Description
T005 64 021 99 SPI 27 Line voltage soldering iron
unregulated 25 W, 230 V
Scope of supply
Complete with soldering tip 4SPI26206 chisel tip 1,2 mm and safety rest
Order-no. Model Description
T005 64 005 99 SPI 16 Line voltage soldering iron
unregulated 15 W, 230 V
Scope of supply
Complete with soldering tip 4SPI15212 chisel tip 1,2 mm and safety rest
Robust heating elements of special steel between natural mica-leaves, embedded in cast ceramics and first-class
material make the Weller SPI irons outstanding in technology and life-time. Ideal for professional applications in
crafts and schools.
Unregulated Line Voltage Soldering Iron
www.labem.pl
153
SPI 81w
80 W, 230 V
Heating up time approx. 180 sec.
Tip temperature approx. 480°C
SPI 81-Soldering tip
series page 191
SPI 41-Soldering tip
series page 191
40 W, 230 V
Heating up time approx. 180 sec.
Tip temperature approx. 450°C
SPI 41
Order-no. Model Description
T005 64 053 99 SPI 81 Line voltage soldering iron
unregulated 80 W, 230 V
Scope of supply
Complete with soldering tip 4SPI80237 chisel tip 5,0 mm and safety rest
Order-no. Model Description
T005 64 037 99 SPI 41 Line voltage soldering iron
unregulated 40 W, 230 V
Scope of supply
Complete with soldering tip 4SPI402224 chisel tip 2,0 mm and safety rest
Soldering
www.labem.pl
154
ESD
3/4
1
2
DX Desoldering
nozzle series
page 194
80 W, 24 V
With external solder collector
Same working position as usual
soldering irons
DSX 80 Set
Accessory
Order-no. Description
T005 13 604 99 Filter for glastube (10 pieces)
Order-no. Model Description
T005 13 183 99 DSX 80 Set Desoldering iron set 80 W, 24 V
with threadless nozzle fixture system
Scope of supply
1 T005 13 190 99 DSX 80 Desoldering iron 80 W, 24 V
2 T005 15 152 99 WDH 30 Safety rest
3 T005 13 142 00 DX 112 Nozzle inner ø 1,0 mm
4 T005 13 143 00 DX 113 Nozzle inner ø 1,2 mm
T005 13 500 99 Cleaning Set
T005 13 603 99 Gaskets for glastube (10 pieces)
The desoldering irons of the X-series feature a novel threadless desoldering nozzle fixture system whereby the nozzle
is inserted into the head and locked into place by applying a 1/4 turn. This patented feature allows the desoldering
nozzles to be quickly and easily exchanged and also improves the rate of thermal transfer from the desoldering head
to the desoldering nozzle providing the tools with a faster heating up time and recovery rate. Together with a 80
watts heating element the desoldering iron is qualified for solder joints where a high temperature is required.
Desoldering iron with external solder collector (DSX 80) for SMD components. Same working position as usual
soldering irons. Electronic temperature control. Micro finger switch for activating the vacuum pump.
Various desoldering nozzles as well as CSF desoldering heads are available.
Desoldering Iron
www.labem.pl
155
6
5
3/4
2
1
2
1
7
8
Desoldering
DX Nozzle series
page 194
80 W, 24 V
Internal solder reservoir
For vertical applications
DXV 80 Set
Order-no. Model Description
T005 13 182 99 DXV 80 Set Inline desoldering iron 80 W, 24 V
with threadless nozzle fixture system
Scope of supply
1 T005 13 180 99 DXV 80 Inline desoldering iron 80 W, 24 V
2 T005 15 153 99 WDH 40 Safety rest
3 T005 13 142 00 DX 112 Nozzle inner ø 1,0 mm
4 T005 13 143 00 DX 113 Nozzle inner ø 1,2 mm
5 T005 13 500 99 Cleaning Set
6 T005 87 418 15 Filter cartridge for DXV 80 (5 pieces)
7 T005 87 418 23 Brush for heating element
8 T005 87 067 94 Cone cleaner
Inline desoldering iron with internal solder reservoir for vertical handling. Electronic temperature control.
Micro finger switch controls quick start of fast action vacuum pump. Different nozzles and CSF heads are available.
WXDV 120 Set
XDS Nozzle series
page 197
120 W, 24 V
Temperature range
100°C - 350°C, 120 W, 24 V
Heat-up time ca. 35 sec.
(50°C - 350°C / 122° F- 662°F)
Setback capable
Blue LED indication light
Integrated tin collector
Internal parameter storage
(Zero Tolerance)
Connectable to WXD 2
Order-no. Model Description
T005 13 205 99 WXDV 120 Desoldering iron 120 W, 24 V
Lieferumfang
1 T005 13 204 99 WXDV 120 Desoldering iron 120 W, 24 V
2 T005 15 153 99 WDH 40 Safety rest
T005 87 658 01 PDN Pliers for desoldering nozzles
T005 13 252 00 XDS 3 Nozzle
T005 13 254 00 XDS 5 Nozzle
T005 87 657 73 Cleaning Set
T005 87 657 72 Cone cleaner
T005 87 418 19 Filter cartridge (5 pieces)
Available from September 2013
www.labem.pl
156
Desoldering Irons
For cleaning nozzles and for
nozzle exchange
Maintenance set for
Desoldering Irons and nozzles
Order-no. Description
T005 13 500 99 Cleaning set complete
Scope of supply
T005 87 488 61 Handle
T005 13 501 99 Spare needle set, 0,6 mm / 0,9 mm / 1,4 mm / 1,9 mm
Accessory
T005 13 502 99 Spare needle set, 1 x 1,9 mm, 3 x 0,9 mm
T005 13 503 99 Spare needle set, 1 x 1,9 mm, 3 x 0,5 mm
T005 13 504 99 Spare needle set, 1 x 1,9 mm, 3 x 1,4 mm
Order-no. Description
T005 87 658 01 PDN Pliers for desoldering nozzles
Order-no. Description
T005 87 637 73 Cleaning set for WXDP 120 and WSDV 120
T005 13 500 99 Cleaning set for DSX 80 und DXV 80
Order-no. Description
T005 87 657 78 Glas tube for WXDP 120
T005 13 605 99 Glas tube for DSX 120 and DSX 80 (4 pieces)
Order-no. Description
T005 87 657 72 Cone cleaner for WXDP 120 / WXDV 120 / DSX 120
T005 87 067 94 Cone cleaner for DSX 80 and DXV 80
www.labem.pl
157
1
2
1
2
Desoldering
Order-no. Model Description
1 T005 13 198 99 DSX 120 Desoldering iron 120 W, 24 V
with excenter fixture, without safety rest.
Safety rest must be ordered separately.
2 Scope of supply
T005 13 604 99 XDS 1 Nozzle
Accessory
T005 15 152 99 WDH 30 Safety rest with dry cleaner
XDS-Nozzles
page 197
120 W, 24 V High power
desoldering iron
Heat up time 35 sec only,
set-back function
DSX 120
New products enlarge the WX family. A new WXD 2 desoldering station and a new WXDP desoldering iron.
These tools are ideal for professional rework applications of the latest electronic components in the industrial
operation. Typically for the WX stations: soldering and desoldering parameters can be saved easily on the iron.
The WXDP 120 heats up within 35 sec. only. With stand-by function.
Order-no. Model Description
T005 13 202 99 WXDP 120 Set Desoldering iron 120 W, 24 V
with excenter fixture
Scope of supply
1 T005 13 201 99 WXDP 120 Desoldering iron 120 W, 24 V
2 T005 15 172 99 WDH 70 Safety rest with dry cleaner
3 T005 87 657 78 Glas tube with strap
T005 87 657 72 Cone cleaner
T005 87 657 73 Filter ø 17 für Glasrohr (10 pieces)
T005 87 657 73 Cleaning set WXDP / DSX 120
T005 87 658 01 PDN Pliers desoldering nozzles
XDS-Nozzles
page 197
120 W, 24 V High power
desoldering iron
Heat up time 35 sec only
Set-back function
Push and pull technolgy:
cartridge change with one
hand possible
Programmable, intelligent
WX desoldering iron
WXDP 120 Set
www.labem.pl
158
ESD
2
1
3
1
3
2
Hot air nozzles
page 198–204
100 W, 24 V
Temperature range
50°C to 550°C
Hot air flow ionic free
Activated by finger switch
HAP 1 Set
The hot air iron HAP 200 works with the rework station WR 3M only.
Order-no. Model Description
T005 27 118 99 HAP 1 Set Hot air iron set 100 W, 24 V
Scope of supply
1 T005 27 115 99 HAP 1 Hot air iron 100 W / 24 V
with Hot air nozzle R 06 round ø 3,0 mm
2 T005 87 278 21 R 04 Hot air nozzle round ø 1,2 mm
3 T005 15 152 99 WDH 30 Safety rest with dry cleaner
The hot air irons HAP 1 and HAP 200 work with a temperature range from 50°-550°C. They provide a directional hot
air flow that is adjustable. Finger switch controls adjustable pump. Different nozzles are available.
Hot Air Irons
WTA tips
page 185
Tweezers 50 W, 24 V
For desoldering of
SMD components
WTA 50 Set
Order-no. Model Description
T005 33 133 99 WTA 50 Set Tweezers WTA 50 with safety rest
Scope of supply
1 T005 13 171 99 WTA 50 Tweezers 2 x 25 W, 24 V
2 T005 44 141 99 WTA 1 Tip set, bent 45°, 0,5 mm X 0,5 mm
3 T005 15 042 99 AK 51 Safety rest
www.labem.pl
159
2
1
3
2
1
3
ESD
Hot Air
Hot air nozzles
page 198–204
200 W, 24 V
Temperature range
50°C to 550°C
Activated by finger switch
HAP 200 Set
Order-no. Model Description
T005 27 117 99 HAP 200 Set Hot air iron set 200 W, 24 V
Scope of supply
1 T005 27 116 99 HAP 200 Hot air iron 200 W / 24 V
2 T005 87 278 21 R 04 Hot air nozzle round ø 1,2 mm
3 T005 15 152 99 WDH 30 Safety rest with dry cleaner
T005 87 617 28 Adapter M6 for HAP 200
4 T005 87 278 22 R 06 Hot air nozzle ø 3,0 mm
200 W, 24 V
Temperature range
50°C to 550°C
Blue LED light
Internal Parameter storage
(zero tolerance)
Hot air flow ionic free
WXHAP 200 Set
Order-no. Model Description
T005 27 120 99 WXHAP 200 Set Hot air soldering iron set 200 W, 24 V
Scope of supply
1 T005 27 119 99 WXHAP 200 Hot air iron 200 W / 24 V
with hot air nozzle R 06 round ø 3,0 mm
2 T005 15 152 99 WDH 30 Safety rest with dry cleaner
4 T005 87 278 22 R 06 Hot air nozzle ø 3,0 mm
T005 87 278 21 R 04 Hot air nozzle round ø 1,2 mm
T005 87 617 28 Adapter M6 for WXHAP 200
Hot air nozzles
page 198–204
Available from September 2013
www.labem.pl
160
Solutions for cleaning challenges with lead free solder!
When using lead free it will be experienced an increased oxidati-
on in the wettable area of the tip. These oxides must be removed
regularly otherwise it will make the tip completely unwettable
and not usable anymore. When cleaning the tip by means of the
Weller WDC Dry Cleaner a special brass wool is used. First the
surplus solder is removed by tapping the tip on the soft edge of
the collector box.The final cleaning is then done by pushing
and turning the tip in the brass wool. After cleaning there is still
a fine layer of solder on the tip avoiding fast oxidation of the iron
layer which is an advantage versus the cleaning by the wet spon-
ge. The brass wool can be soaked in flux which may improve
even the performance.
Individual cleaning methods
Wet cleaning with cleaning sponge
Why dry cleaning?
Best cleaning effect
Soldering tip will be cleaned but stays wetted
Flux will be removed
Safe from oxidation
Less temperature shock
Dry cleaning with steel or brass wool
Recommended treatment of Soldering Tips
To ensure continued pleasure of our products it is essential to use only
genuine Weller parts.
Weller‘s soldering tip and heater form a unit and therefore a perfect
heating system to produce high quality solder joints. Perfect interac-
tion between the heater and soldering tip protects the soldering iron
from irreparable damage. Other tips often damage the heating system.
A manufacturer‘s warranty is given only if genuine Weller replacement
parts are used.
Genuine Weller tips can be identified by the Weller marking on the shaft
of the tip as well as the Genuine Weller seal on the packging.
www.labem.pl
161
Use all possiblities and accessories for lowering
the soldering tip temperature
High power infra-red preheating plate
Support for hand soldering processes without
risking overheating
Tip activator
Regeneration of oxidized tips. Use when tip is hot.
Polishing bar WPB 1
Removes compact oxid films and regenerates tip surfaces when
tip is cold.
After use wet the soldering tip again - with Weller WSW
Always use the lowest possible tip temperature and add suffici-
ent solder to the tip before placing the iron back to the safety
rest.
Dry cleaning with WDC
Soldering tip will be cleaned but stays wetted.
Flux will be removed.
Best treatment for soldering tips.
Soldering Tips
Stand-by mode
Auto-off mode
Safety rests with Stop & Go function
Tools with Acceleration sensor
www.labem.pl
162
Weller Summary Soldering Tips
Soldering Tools
Soldering Tips
XT XTR LTR ET XHT XNT RT RTW LT NT LHT HT WTA PT CT SPI DS DX F R D Q NR ND NQ NQT XDS 60 70 71
Fast response
WP 65
WP 120
WP 200
WXP 65
WXP 120
WXP 200
Silver-Line
FE 75
FE 80
MPR 80
WP 80
WSP 80
WSP 150
Active-Tip
WMRP
WMRT
WXMP
WXMT
Standard-Line
LR 21
LR 82
WTA 50
Unregulated Line Voltage Soldering Irons
SPI 16,27,41,81
Magnastat Controlled Line Voltage Soldering Irons
TCPS,TCP 12,TCP 24
W 61,101,201
Desoldering Irons
DS 22,80,DSV 80
DSX 80
DXV 80
WXDP 120
DSX 120
WXDV 120
Hot Air Irons
HAP 1,HAP 200
HAP 3000
WXHAP 200
Gas Powered Soldering Irons
Pyropen Jr.
Pyropen and P. Piezo
WP 60
Inert Gas Soldering Irons
WSP 80IG
WSP 120IG
Heating Elements
HER 120
HER 80
with Ad.
with Ad.
Page 142
Page 144
Page 145
Page 142
Page 143
Page 145
Page 130 /148 / 126
Page 130, 149, 126
Page 147
Page 146
Page 146
Page 147
Page 140
Page 141
Page 140
Page 141
Page 149
Page 158
Page 152, 153
Page 150
Page 151
Page 154
Page 155
Page 157
Page 157
Page 155
Page 158 / 159
Page 70
Page 159
Page 43
Page 42
Page 43
Page 37
Page 37
Page 35
Page 35
Page Page Page Page Page Page Page Page Page 177/ Page Page Page Page Page
172 / 173 175 182 184 176 168 / 169 164 / 165 166 / 167 178/179/180 170 183 185 185 186 / 187
www.labem.pl
163
Soldering Tips
XT soldering
head
XT XTR LTR ET XHT XNT RT RTW LT NT LHT HT WTA PT CT SPI DS DX F R D Q NR ND NQ NQT XDS 60 70 71
Fast response
WP 65
WP 120
WP 200
WXP 65
WXP 120
WXP 200
Silver-Line
FE 75
FE 80
MPR 80
WP 80
WSP 80
WSP 150
Active-Tip
WMRP
WMRT
WXMP
WXMT
Standard-Line
LR 21
LR 82
WTA 50
Unregulated Line Voltage Soldering Irons
SPI 16,27,41,81
Magnastat Controlled Line Voltage Soldering Irons
TCPS,TCP 12,TCP 24
W 61,101,201
Desoldering Irons
DS 22,80,DSV 80
DSX 80
DXV 80
WXDP 120
DSX 120
WXDV 120
Hot Air Irons
HAP 1,HAP 200
HAP 3000
WXHAP 200
Gas Powered Soldering Irons
Pyropen Jr.
Pyropen and P. Piezo
WP 60
Inert Gas Soldering Irons
WSP 80IG
WSP 120IG
Heating Elements
HER 120
HER 80
Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page
188 / 189 / 190 191 195 194 198 198 199 199 200 201 202 203 197 192 193 192 Page 173 / 174
www.labem.pl
164
RT Soldering Tip Series
Soldering Tips for Soldering irons WMRP, WXMP
Soldering Tips
■Excellent heat transfer and sensors
■Soldering tips can be changed
quickly and easily
■Excellent reaction time
■Extremely short heating time
WMRP / WXMP
Fine slim soldering iron. Ideal for microscope work.
High performance by integrated active soldering tip.
40 W (55 W with RT 11), 12 V
c
a
b
Chisel
Type RT Ø a
mm
b
mm
Order-no.
RT 1SC 0,4 0,15 T005 44 612 99
RT 1SCNW* 0,3 0,1 T005 44 626 99
RT 3 1,3 0,4 T005 44 603 99
RT 4 1,5 0,4 T005 44 604 99
RT 8 2,2 0,4 T005 44 608 99
RT 9 0,8 0,4 T005 44 609 99
RT 11 3,6 0,9 T005 44 611 99
RT 5 30° 0,8 0,4 T005 44 605 99
Type Ø a
mm
b
mm
Order-no.
RT 1SCMS 0,4 0,15 T005 44 615 99
RT 1SCNWMS* 0,3 0,1 T005 44 626 71
RT 3MS 1,3 0,4 T005 44 616 99
RT 4MS 1,5 0,4 T005 44 618 99
RT 8MS 2,2 0,4 T005 44 622 99
RT 9MS 0,8 0,4 T005 44 623 99
RT 11MS 3,6 0,9 T005 44 631 99
RT 5MS 30° 0,8 0,4 T005 44 619 99
RT 3XMS 30° 1,3 0,5 T005 44 603 73
MS tips: separate grounded
a
Sloped
Type a
mm
Order-no.
RT 6 45° 1,2 T005 44 606 99
Type a
mm
Order-no.
RT 6MS 45° 1,2 T005 44 620 99
* none wettable
RT
www.labem.pl
165
Soldering Tips
MS handles and MS soldering tips have to be used together.
MS soldering tips are for use with MS handles only (WXMP MS / WMRP MS)
MS handles for RT MS soldering tips
T005 29 213 99 WXMP MS soldering iron handle packed
T005 29 217 99 WXMP MS soldering iron with safety rest WDH 51
T005 29 192 99 WMRP MS soldering iron handle packed
c
b
a
a
Gull Wing
Knife
Measuring tip
Type Ø a
mm
b
mm
Order-no.
RT 10GW 1,2 2,0 T005 44 610 99
Type Ø a
mm
Order-no.
RT 7 45° 2,2 T005 44 607 99
Type Order-no.
Measuring tip T005 44 613 99
Type Ø a
mm
b
mm
Order-no.
RT 10GWMS 1,2 2,0 T005 44 624 99
Type Ø a
mm
Order-no.
RT 7MS 45° 2,2 T005 44 621 99
Conical
a
Type Ø a
mm
Order-no.
RT 1MS 0,2 T005 44 614 99
RT 1NWMS* 0,1 T005 44 625 71
RT 2MS 0,8 T005 44 617 99
RT 12MS 25° 0,5 T005 44 632 99
RT 13MS 30° 0,4 T005 44 633 99
Type Ø a
mm
Order-no.
RT 1 0,2 T005 44 601 99
RT 1NW* 0,1 T005 44 625 99
RT 2 0,8 T005 44 602 99
MS tips: separate grounded
* none wettable
www.labem.pl
166
RTW Soldering Tip Series
Soldering tips for desoldering tweezers WMRT, WXMT
Soldering Tips
WXMT / WMRT
Slim tweezers. Ideal for soldering and desoldering
of very small SMD components.
RTW = tweezers
■Excellent heat transfer and sensors
■Solder tips can be changed
quickly and easily
■Excellent reaction time
■Extremely short heating time
Type Ø a
mm
b
mm
Order-no.
RTW 2 45° 0,7 0,4 T005 44 652 99
RTW 3 45° 3,0 1,0 T005 44 653 99
RTW 4 45° 6,0 1,0 T005 44 654 99
RTW 9 3,0 1,0 T005 44 666 99
RTW 11 6,0 1,0 T005 44 667 99
RTW 10 10,0 1,0 T005 44 668 99
RTW 8 1,3 0,4 T005 44 664 99
Type Ø a
mm
b
mm
Order-no.
RTW 2MS45° 0,7 0,4 T005 44 657 99
RTW 3MS 45° 3,0 1,0 T005 44 658 99
RTW 4MS 45° 6,0 1,0 T005 44 659 99
RTW 9MS 3,0 1,0 T005 44 669 99
RTW 11MS 6,0 1,0 T005 44 670 99
RTW 10MS 10,0 1,0 T005 44 671 99
RTW 8MS 1,3 0,4 T005 44 665 99
RTW 7NWMS*
0,8 0,4 T005 44 663 71
a
b
Chisel
RTW
2 x 40 W, 12 V
www.labem.pl
167
Soldering Tips
MS handles and MS soldering tips have to be used together.
MS soldering tips are for use with MS handles only (WXMT MS / WMRT MS)
MS handles for RTW MS soldering tips
T005 29 213 99 WXMT MS Micro tweezers handle packed
T005 29 217 99 WXMT MS Micro tweezers with safety rest WDH 60
T005 29 192 99 WMRT MS Micro tweezers handle without tips
MS tips: separate grounded
Type Ø a
mm
Order-no.
RTW 1 45° 0,4 T005 44 651 99
RTW 6NW* 45° 0,2 T005 44 656 99
Type Ø a
mm
Order-no.
RTW 1MS 45° 0,4 T005 44 655 99
RTW 6NWMS* 45° 0,2 T005 44 656 71
a
Conical
* none wettable
www.labem.pl
168
Soldering Tips
XNT Soldering Tip Series
Soldering Tips for Soldering irons WXP 65, WP 65
WXP 65 / WP 65
Small fast soldering iron. Suitable for fine solder
jobs with high heating demand.
65 W, 24 V
■Interchangeable soldering tips
at low prices
■Maximum heat transfer
■Heater with improved sensor position
■Fast recovery time
Type Ø a
mm
c
mm
Order-no.
XNT KN 2,0 33,0 T005 44 863 99
T005 44 863 10
Knife
Type a
mm
Order-no.
XNT 4 1,2 T005 44 855 99
T005 44 855 10
XNT AA 45° 1,6 T005 44 884 99
T005 44 884 10
XNT BB 45° 2,4 T005 44 885 99
T005 44 885 10
Type a
mm
Order-no.
XNT CC 45° 3,2 T005 44 886 99
T005 44 886 10
XNT F 45° 1,2 T005 44 887 99
T005 44 887 10
Type Ø a
mm
b
mm
c
mm
Order-no.
XNT 1SCNW* 0,3 0,1 27,0 T005 44 881 99
T005 44 881 10
XNT 1SC 0,4 0,15 27,0 T005 44 862 99
T005 44 862 10
XNT H 0,8 0,4 28,0 T005 44 859 99
T005 44 859 10
XNT K 1,2 0,4 28,0 T005 44 860 99
T005 44 860 10
XNT A 1,6 0,4 28,0 T005 44 851 99
T005 44 851 10
XNT 6 1,6 0,4 29,5 T005 44 856 99
T005 44 856 10
XNT B 2,4 0,8 27,0 T005 44 857 99
T005 44 857 10
Type Ø a
mm
b
mm
c
mm
Order-no.
XNT C 3,2 0,8 27,0 T005 44 858 99
T005 44 858 10
XNT D 4,0 0,8 28,0 T005 44 853 99
T005 44 853 10
XNT HX 30° 0,8 0,4 36,5 T005 44 873 99
T005 44 873 10
XNT 4X 45° 1,2 0,4 34,6 T005 44 874 99
T005 44 874 10
XNT AX 1,6 0,8 28,0 T005 44 864 99
T005 44 864 10
XNT BX 2,4 0,8 36,5 T005 44 882 99
T005 44 882 10
XNT MX 3,2 0,8 37,5 T005 44 883 99
T005 44 883 10
c
a
b
a
ac
a
Chisel
Conical
Sloped
■T005XXXXX99 = 1 Piece
■T005XXXXX10 = 10 Pieces
■T005XXXXX11 = 100 Pieces
XNT
* none wettable
Typ Ø a
mm
c
mm
Order-no.
XNT S 0,4 37,5 T005 44 868 99
T005 44 868 10
Typ Ø a
mm
c
mm
Order-no.
XNT 1 0,5 27,0 T005 44 850 99
T005 44 850 10
www.labem.pl
169
35°C 200°C
12 s 24 s
12 s 24 s
Soldering Tips
Type Ø a
mm
c
mm
Order-no.
XNT 1S 0,2 28,5 T005 44 852 99
T005 44 852 10
XNT 1LX 0,2 T005 44 872 99
T005 44 872 10
Type b
mm
c
mm
Order-no.
XNT GW 1 2,0 33,0 T005 44 854 99
T005 44 854 10
XNT GW 1,5 27,5 T005 44 880 99
T005 44 880 10
Type Ø a
mm
c
mm
Order-no.
XNT 1X 0,4 28,0 T005 44 865 99
T005 44 865 10
XNT 1SLX 45° 0,4 39,5 T005 44 875 99
T005 44 875 10
Type Ø a
mm
b
mm
c
mm
Order-no.
XNT S HS 0,4 T005 44 896 99
T005 44 896 10
XNT AS HS 1,6 T005 44 897 99
T005 44 897 10
XNT 1L HS 0,2 T005 44 898 99
T005 44 898 10
XNT 1LX HS 0,2 T005 44 8 99 99
T005 44 8 99 10
XNT HX HS 30° 0,8 0,4 36,5 T005 44 900 99
T005 44 900 10
XNT 4XHS 45° 1,2 0,4 34,6 T005 44 901 99
T005 44 901 10
XNT 1SLX HS 45°
0,4 39,5 T005 44 902 99
T005 44 902 10
XNT F HS45° 1,2 T005 44 903 99
T005 44 903 10
c a
Gull Wing
c
b
a
High Speed
Round
SMT
Type Ø a
mm
b
mm
c
mm
Order-no.
XNT 1 HS 0,5 27,0 T005 44 888 99
T005 44 888 10
XNT 1S HS 0,2 28,5 T005 44 889 99
T005 44 889 10
XNT 4 HS 1,2 T005 44 890 99
T005 44 890 10
XNT 6 HS 1,6 0,4 29,5 T005 44 891 99
T005 44 891 10
XNT H HS 0,8 0,4 28,0 T005 44 892 99
T005 44 892 10
XNT K HS 1,2 0,4 28,0 T005 44 893 99
T005 44 893 10
XNT AX HS 1,6 0,8 28,0 T005 44 894 99
T005 44 894 10
XNT 1X HS 0,4 28,0 T005 44 895 99
T005 44 895 10
XNT
Accessories Type Ø a
mm
c
mm
Order-no.
Measuring tip 0,6 31,3 T005 44 861 99
XNT Screw
M4 26,0 T005 44 879 99
Type Order-no.
Barrel T005 87 657 58
Barrel for bent T005 87 657 67
Type Ø a
mm
b
mm
c
mm
Order-no.
XNT SMT 01 10,4 0,6 7,1 T005 44 876 99
XNT SMT 02 16,8 0,6 7,1 T005 44 877 99
Type Ø a
mm
b
mm
c
mm
Order-no.
XNT SMT 03 20,8 0,6 7,1 T005 44 878 99
Weller
High Speed
solder tip
Weller
standard tip
Heat transfer
to the solder area
High Speed heat transfer
High Speed soldering tips provide enhanced
heat transfer to the solder area.
High Speed
www.labem.pl
170
Soldering Tips
Order-no. Model Description Width A Thickness B Length L
NT 1SC NT 1SC Chisel tip slim 0,4 mm 0,15 mm 14 mm
NT H NT H Chisel tip 0,8 mm 0,4 mm 8,4 mm
NT K NT K Chisel tip 1,2 mm 0,4 mm 8,4 mm
NT A NT A Chisel tip 1,6 mm 0,4 mm 9,5 mm
NT 6 NT 6 Chisel tip 1,6 mm 0,7 mm 7,4 mm
NT B NT B Chisel tip 2,4 mm 0,8 mm 7,8 mm
NT C NT C Chisel tip 3,2 mm 0,8 mm 8,2 mm
NT D NT D Chisel tip 4,0 mm 0,8 mm 8,6 mm
NT AX NT AX Chisel tip bent 1,6 mm 0,4 mm 8,2 mm
NT 1S NT 1S Round tip slim Ø 0,25 mm 8,5 mm
NT 1 NT 1 Round tip Ø 0,50 mm 7,4 mm
NT 1X NT 1X Round tip Ø 0,4 mm 8,6 mm
bent 45°
NT 4 NT 4 Round tip Ø 1,2 mm 9,9 mm
sloped 45°
NT GW NT GW Gullwing tip 2,0 mm 3,0 mm 13,4 mm
NT MS NT MS NT Measuring tip for thermoelement Ø 0,5 mm
NT Soldering Tip Series
Soldering Tips for WMP
www.labem.pl
171
Order-no. Description
T005 87 517 17 Silicon pad for changing bent NT tips
T005 87 517 10 Tip changing tool for changing straight NT tips
Soldering Tips
Continuation page 170, further soldering tips for WMP
www.labem.pl
172
Soldering Tips
XT Soldering Tip Series
Soldering Tips for Soldering irons WP 120 and WXP 120
Type Ø a
mm
c
mm
Order-no.
XT BS 2,4 36,5 T005 44 715 99
T005 44 715 10
XT CS 3,2 36,5 T005 44 716 99
T005 44 716 10
Type Ø a
mm
b
mm
c
mm
Order-no.
XT H 0,8 0,4 36,5 T005 44 713 99
T005 44 713 10
XT A 1,6 0,7 36,5 T005 44 703 99
T005 44 703 10
XT AL 1,6 1,0 39,5 T005 44 701 99
T005 44 701 10
XT ASL 1,6 0,45 36,5 T005 44 740 99
T005 44 740 10
XT M 3,2 1,2 39,5 T005 44 702 99
T005 44 702 10
XT B 2,4 0,8 36,0 T005 44 704 99
T005 44 704 10
XT BSL 2,4 0,45 36,0 T005 44 741 99
T005 44 741 10
XT B SL 2,5 0,8 36,3 T005 44 738 99
T005 44 738 10
XT C 3,2 0,8 36,0 T005 44 705 99
T005 44 705 10
c
a
b
ca
c a
Type a
mm
c
mm
Order-no.
XT CC 45° 3,2 36,5 T005 44 710 99
T005 44 710 10
XT DDH 45 45° 4,0 40,5 T005 44 730 99
T005 44 730 10
XT AA 60 ° 1,6 36,5 T005 44 708 99
T005 44 708 10
Chisel
Type Ø a
mm
c
mm
Order-no.
XT DS 5,0 34,5 T005 44 717 99
T005 44 717 10
Sloped
Round
XT Type Ø a
mm
b
mm
c
mm
Order-no.
XT D 4,6 0,8 34,5 T005 44 706 99
T005 44 706 10
XT CSL 3,2 0,45 36,0 T005 44 742 99
T005 44 742 10
XT E 5,9 1,2 34,5 T005 44 707 99
T005 44 707 10
XT DL 4,6 0,8 39,5 T005 44 736 99
XT MX 3,2 0,8 53,5 T005 44 745 99
T005 44 745 10
XT HX 0,8 0,4 51,5 T005 44 737 99
XT AX 30° 1,6 0,7 51,5 T005 44 743 99
T005 44 743 10
XT BX 30° 2,4 0,8 51,5 T005 44 744 99
T005 44 744 10
Type a
mm
c
mm
Order-no.
XT F 30° 1,2 36,5 T005 44 718 99
T005 44 718 10
XT AA 60° 1,6 36,5 T005 44 708 99
T005 44 708 10
XT BB 45° 2,4 36,5 T005 44 709 99
T005 44 709 10
WXP 120 / WP 120
All-rounder with 120 watts. For soldering applications from
small to large components with higher heat demand.
120 W, 24 V
■Interchangeable soldering tips
at low prices
■Maximum heat transfer
■Heater with improved sensor position
■Fast reaction time
www.labem.pl
173
Soldering Tips
Type Ø a
mm
b
mm
c
mm
Order-no.
XT GW1 2,3 3,2 36,5 T005 44 712 99
T005 44 712 10
XT GW2 3,5 4,8 36,5 T005 44 735 99
c
b
a
Gull Wing
Knife
Soldering head
Type Ø a
mm
b
mm
c
mm
Order-no.
XT GW3 0,8 0,9 41,5 T005 44 711 99
T005 44 711 10
XT
Type Ø a
mm
c
mm
Order-no.
XT KN 60 ° 2,0 45,0 T005 44 711 99
T005 44 714 10
ca
Conical
Type Ø a
mm
c
mm
Order-no.
XT O 1,0 36,5 T005 44 714 99
T005 44 714 10
Type a
mm
b
mm
Order-no.
XT Soldering
head + adapter
10,0 4,0 T005 44 731 99
Soldering head 10,0 4,0 T005 44 731 90
XT Soldering
head + adapter
20,0 4,0 T005 44 732 99
Soldering head 20,0 4,0 T005 44 732 90
XT Soldering
head + adapter
33,0 4,0 T005 44 733 99
Soldering head 33,0 4,0 T005 44 733 90
■T005XXXXX99 = 1 Piece
■T005XXXXX10 = 10 Pieces
■T005XXXXX11 = 100 Pieces
www.labem.pl
174
Soldering Tips
XT Soldering Tip Series
Soldering Tips for Soldering irons WP 120 and WXP 120
The XT soldering head is an ideal tool for tin coating, soldering and desoldering different components.
The additional required barrel must be ordered separately.
Type Order-no.
Barrel WXP 120
WP 120
T005 87 657 11
T005 87 637 09
Barrel for bent WXP 120
WP 120
T005 87 657 66
T005 87 658 02
Accessories
Type a
mm
c
mm
Order-no.
Measuring tip 0,5 40,0 T005 44 722 99
XT Adapter M4 36,0 T005 44 719 99
XT Adater M5 36,0 T005 44 720 99
■T005XXXXX99 = 1 Piece
■T005XXXXX10 = 10 Pieces
■T005XXXXX11 = 100 Pieces
www.labem.pl
175
Soldering Tips
Order-no. Model Description Width A Thickness B Length L
T005 44 723 99 XTR A Chisel tip, (1 piece) 1,6 mm 0,7 mm 36,0 mm
T005 44 723 10 (10 pieces)
T005 44 724 99 XTR B Chisel tip, (1 piece) 2,4 mm 0,8 mm 35,0 mm
T005 44 724 10 (10 pieces)
T005 44 725 99 XTR C Chisel tip, (1 piece) 3,2 mm 0,8 mm 35,0 mm
T005 44 725 10 (10 pieces)
T005 44 726 99 XTR D Chisel tip, ( 1 piece) 4,6 mm 0,8 mm 34,5 mm
T005 44 726 10 (10 pieces)
T005 44 727 99 XTR E Chisel tip, (1 piece) 5,9 mm 1,2 mm 34,5 mm
T005 44 727 10 (10 pieces)
T005 44 728 99 XTR M Chisel tip, (1 piece) 3,2 mm 1,2 mm 39,0 mm
T005 44 728 10 (10 pieces)
XTR Soldering Tip Series
Soldering tip with twist lock. For use with robot heating element HER 120 and HERX 120.
www.labem.pl
176
LötspitzenSoldering Tips
XHT Soldering Tip Series
Soldering Tips for Soldering irons WP 200,WXP 200
Type Ø a
mm
b
mm
c
mm
Order-no.
XHT C 3,2 1,2 48,0 T005 44 804 99
XHT D 5,0 1,2 48,0 T005 44 801 99
Type Ø a
mm
b
mm
c
mm
Order-no.
XHT E 7,6 1,5 48,0 T005 44 802 99
XHT F 9,3 2,0 48,0 T005 44 805 99
c
a
b
Accessories
Chisel
XHT
Type a
mm
b
mm
c
mm
Order-no.
Measuring tip 1,25 6,0 55,0 T005 44 803 99
Barrel T005 87 637 25
Type Ø a
mm
b
mm
c
mm
Order-no.
XHT C 3,2 1,2 48,0 T005 44 804 99
XHT D 5,0 1,2 48,0 T005 44 801 99
Type Ø a
mm
b
mm
c
mm
Order-no.
XHT E 7,6 1,5 48,0 T005 44 802 99
XHT F 9,3 2,0 48,0 T005 44 805 99
c
a
b
Accessories
Chisel
XHT
Type a
mm
b
mm
c
mm
Order-no.
Measuring tip 1,25 6,0 55,0 T005 44 803 99
Barrel T005 87 637 25
Further soldering tip dimensions
on request.
WXP 200 / WP 200
High Power soldering iron. Ideal for applications with highest
heat demand e.g. LED backpanels or RF shieldings.
200 W, 24 V
■Interchangeable soldering tips
at low prices
■Maximum heat transfer
■Heater with improved sensor position
■Fast reaction time
www.labem.pl
177
LT Soldering Tip Series
Soldering Tips for Soldering irons WP 80, WSP 80, MPR 80 and FE 75,
TCP-Soldering irons , LR 21, MLR 21 with adapter
Soldering Tips
Type Ø a
mm
b
mm
c
mm
Order-no.
LT 1SC 0,4 0,15 15,0 T005 44 494 99
T005 44 494 10
LT 1SCNW* 0,3 0,1 15,0 T005 44 497 99
LT A 1,6 0,7 12,5 T005 44 440 99
T005 44 440 10
T005 44 403 11
LT ASL 1,6 0,45 12,5 T005 44 516 99
T005 44 516 11
LT B 2,4 0,8 12,5 T005 44 405 99
T005 44 405 10
T005 44 405 11
LT BSL 2,4 0,45 12,5 T005 44 517 99
T005 44 517 11
LT H 0,8 0,4 12,5 T005 44 437 99
T005 44 437 10
T005 44 412 11
LT HSL 0,8 0,4 12,5 T005 44 518 99
T005 44 518 11
LT C 3,2 0,8 12,5 T005 44 407 99
T005 44 407 10
T005 44 407 11
LT D 4,6 0,8 12,5 T005 44 409 99
T005 44 409 10
T005 44 409 11
Type Ø a
mm
b
mm
c
mm
Order-no.
LT DLL 4,6 1,2 12,5 T005 44 448 99
T005 44 448 10
LT K 1,2 0,4 20,0 T005 44 438 99
T005 44 438 10
T005 44 413 11
LT L 2,0 1,0 20,0 T005 44 414 99
T005 44 414 10
T005 44 414 11
LT M 3,2 1,2 20,0 T005 44 415 99
T005 44 415 10
T005 44 415 11
LT HX 30° 0,8 0,4 17,5 T005 44 420 99
T005 44 420 11
LT ALX 30° 1,6 0,7 17,5 T005 44 443 99
T005 44 443 10
LT BX 30° 2,4 0,8 17,5 T005 44 442 99
T005 44 442 10
LT AX 30° 1,6 0,8 14,1 T005 44 427 99
T005 44 427 10
LT 4X 30° 1,2 0,4 17,2 T005 44 428 99
T005 44 428 10
LT MX 30° 3,2 1,2 20,0 T005 44 469 99
c
a
b
Type Ø a
mm
c
mm
Order-no.
LT 1A 0,5 13,0 T005 44 489 99
T005 44 489 10
T005 44 489 11
LT AS 1,6 12,5 T005 44 404 99
T005 44 404 10
T005 44 404 11
LT CS 3,2 12,5 T005 44 411 99
T005 44 411 10
LT 1SLX 30° 0,4 22,0 T005 44 426 99
T005 44 426 10
LT 1X 30° 0,4 13,0 T005 44 425 99
T005 44 425 10
c a
Chisel
Round
LT
Type Ø a
mm
c
mm
Order-no.
LT 1S 0,2 15,0 T005 44 436 99
T005 44 402 10
LT 1SNW* 0,1 15,0 T005 44 496 99
LT 1SA 0,5 15,0 T005 44 488 99
LT 1 0,25 13,0 T005 44 435 99
T005 44 435 10
T005 44 401 11
LT 1LNW* 0,1 25,4 T005 44 498 99
■For universal applications
■Effective heat transfer
■Extensive range of soldering tips
■High quality heater core
■Soldering tip with low material
use and therefore lower cost
WSP 80 / WP 80
Approved heating technology with effective heat transfer.
For all purpose industrial applications. A wide range of soldering
tips are available.
* none wettable
www.labem.pl
178
Soldering Tips
Continuation page 177, further soldering tips for WP 80, WSP 80, MPR 80, FE 75 and TCP irons
Type a
mm
c
mm
Order-no.
LT DD 45° 4,0 20,0 T005 44 478 99
T005 44 478 10
LT DD 45° 4,6 17,0 T005 44 486 99
T005 44 486 10
T005 44 486 11
LT 11CP 45° 1,2 15,0 T005 44 421 71
LT 22CP 45° 2,0 20,0 T005 44 408 73
LT 33CP 45° 3,0 20,0 T005 44 408 77
LT 44CP 45° 4,0 20,0 T005 44 408 81
ac
a
Type Ø a
mm
c
mm
Order-no.
LT T 0,6 13,0 T005 44 482 99
T005 44 482 10
T005 44 482 11
LT O 0,8 17,0 T005 44 481 99
T005 44 515 10
LT 1LX 35° 0,2 25,4 T005 44 424 99
T005 44 424 10
T005 44 424 11
c
b
a
Type Ø a
mm
c
mm
Order-no.
LT KN 2,0 16,5 T005 44 479 99
T005 44 479 10
LT KNSL 45° 2,0 16,5 T005 44 519 99
ac
Sloped
Gull Wing
Knife
Conical
Type a
mm
c
mm
Order-no.
LT 4 45° 1,2 15,0 T005 44 439 99
T005 44 439 10
T005 44 421 11
LT F 45° 1,2 12,5 T005 44 408 99
T005 44 408 10
T005 44 408 11
LT AA 60° 1,6 12,5 T005 44 487 99
T005 44 487 10
LT BB 60° 2,4 17,0 T005 44 444 99
T005 44 444 10
LT BB 45° 2,4 17,0 T005 44 484 99
LT CC 60° 3,2 17,0 T005 44 445 99
T005 44 445 10
LT CC 45° 3,2 17,0 T005 44 485 99
Type Ø a
mm
c
mm
Order-no.
LT 1L 0,2 25,4 T005 44 423 99
T005 44 423 10
T005 44 423 11
LT 1LNW* 0,1 25,4 T005 44 498 99
LT S 0,4 21,0 T005 44 406 99
T005 44 406 10
T005 44 406 11
Type Ø a
mm
b
mm
c
mm
Order-no.
LT GW1 2,3 3,2 17,8 T005 44 410 99
T005 44 410 10
T005 44 410 11
LT GW2 3,5 4,8 17,8 T005 44 511 99
T005 44 511 10
■T005XXXXX99 = 1 Piece
■T005XXXXX10 = 10 Pieces
■T005XXXXX11 = 100 Pieces
* none wettable
www.labem.pl
179
35°C 200°C
12 s 24 s
12 s 24 s
Soldering Tips
Continuation page 177/178, further soldering tips for WP 80, WSP 80, MPR 80, FE 75 and TCP irons
High Speed
Accessories
Type a
mm
c
mm
Order-no.
Measuring tip
MLR 80/ WSP 80
0,5 13,0 T005 44 416 99
Screw M4
external thread
8,0 T005 44 449 99
ET-LT Adapter T005 87 207 81
Type Ø a
mm
b
mm
c
mm
Order-no.
LT 1 HS 0,25 13,0 T005 44 520 99
T005 44 520 10
T005 44 520 11
LT 1S HS 0,2 15,0 T005 44 521 99
T005 44 521 10
T005 44 52 111
LT AS HS 1,6 12,5 T005 44 522 99
T005 44 522 10
T005 44 522 11
LT S HS 0,4 21,0 T005 44 523 99
T005 44 523 10
T005 44 523 11
LT F HS 45° 1,2 12,5 T005 44 524 99
T005 44 524 10
T005 44 524 11
LT K HS 1,2 0,4 20,0 T005 44 525 99
T005 44 525 10
T005 44 525 11
LT HX HS 30° 0,8 0,4 17,5 T005 44 526 99
T005 44 526 10
T005 44 526 11
LT 4 HS 45° 1,2 15,0 T005 44 527 99
T005 44 527 10
T005 44 527 11
LT 1L HS 0,2 25,4 T005 44 528 99
T005 44 528 10
T005 44 528 11
LT 1LX HS 35° 0,2 25,4 T005 44 529 99
T005 44 529 10
T005 44 529 11
LT 1X HS 30° 0,4 13,0 T005 44 530 99
T005 44 530 10
Type Ø a
mm
b
mm
c
mm
Order-no.
LT 1SLX HS 30° 0,4 22,0 T005 44 531 99
T005 44 531 10
LT AX HS 30° 1,6 0,8 14,1 T005 44 532 99
T005 44 532 10
LT 4X HS 30° 1,2 0,4 17,2 T005 44 533 99
T005 44 533 10
LT O HS 0,8 17,0 T005 44 534 99
T005 44 534 10
LT T HS 0,6 13,0 T005 44 535 99
T005 44 535 11
LT 1SA HS 0,5 15,0 T005 44 536 99
LT 1A HS 0,5 14,0 T005 44 537 99
T005 44 537 10
T005 44 537 11
LT O HS 1,4 17,0 T005 44 538 99
LT ASL HS 1,6 0,45 12,5 T005 44 539 99
T005 44 539 11
LT HSL HS 0,8 0,4 12,5 T005 44 540 99
T005 44 540 11
LT
■T005XXXXX99 = 1 Piece
■T005XXXXX10 = 10 Pieces
■T005XXXXX11 = 100 Pieces
* none wettable
Weller
High Speed
solder tip
Weller
standard tip
Heat transfer
to the solder area
High Speed heat transfer
High Speed soldering tips provide enhanced
heat transfer to the solder area.
High Speed
www.labem.pl
180
Soldering Tips
MT-LT Adapter
All TCP, LR 21 soldering irons are delivered with adapter.
Order-no. Description
T005 44 121 99 MT-LT Adapter for use with
LT soldering tip series (see page 87)
T005 87 207 95 Barrel for MT-LT Adapter
T005 44 430 99 LT H HPB Chisel tip, (1 piece) 0,8 mm 0,4 mm 13,5 mm
T005 44 430 10 (10 pieces)
T005 44 431 99 LT A HPB Chisel tip, (1 piece) 1,6 mm 0,7 mm 13,5 mm
T005 44 431 10 (10 pieces)
T005 44 432 99 LT B HPB Chisel tip, (1 piece) 2,4 mm 0,8 mm 13,5 mm
T005 44 432 10 (10 pieces)
T005 44 483 99 LT D HPB Chisel tip, (1 piece) 4,6 mm 0,8 mm 13,5 mm
* for HPB solder = solder with high consumption of lead
Caution: Not qualified for lead free solder bath or other electronic solder.
Soldering tips for high melting solder for WP 80, WSP 80, MPR 80 and FE 75
Order-no. Model Description Width A Thickness B Length L
www.labem.pl
181
Soldering Tips
Order-no. Description
T005 87 447 10 Barrel for WSP 80 spare part
T005 87 448 45 Barrel short (40 mm) for WP 80, spare part, (standard for WP 80)
T005 87 448 46 Barrel long (55 mm) for WP 80, spare part
Order-no. Model Description Width A Thickness B Length L
T005 44 501 99 SMT01 for PAD-Cleaning 10,4 mm 0,6 mm 7,1 mm
T005 44 429 99 SMT for PAD-Cleaning 10,5 mm 0,6 mm 7,5 mm
T005 44 502 99 SMT02 for PAD-Cleaning 16,8 mm 0,6 mm 7,1 mm
T005 44 503 99 SMT03 for PAD-Cleaning 20,8 mm 0,6 mm 7,1 mm
T005 44 467 89 SMT for PAD-Cleaning 35,0 mm 3,0 mm 4,0 mm
T005 44 504 99 SMT04 for Chip 1,8 mm 3,4 mm 1,8 mm
T005 44 505 99 SMT05 for Chip 1,5 mm 2,3 mm 1,8 mm
T005 44 506 99 SMT06 for Chip 2,5 mm 1,7 mm 1,4 mm
T005 44 507 99 SMT07 for Chip 2,3 mm 4,5 mm 1,8 mm
T005 44 508 99 SMT08 for DIP 4,6 mm 5,1 mm 2,3 mm
T005 44 509 99 SMT09 for DIP 10,4 mm 5,1 mm 2,3 mm
T005 44 510 99 SMT10 for DIP 11,5 mm 6,9 mm 2,3 mm
For quick change of hot soldering tips for soldering irons WP 80 / WSP 80.
If not in use place soldering iron with barrel in the safety rest
Barrel
SMD Soldering Tip Series
For WSP 80, WSP 80IG and WP 80, WP 120, WP 120 IG, WXP 120,
barrel and screw M4 has to be ordered separately.
www.labem.pl
182
Soldering Tips
Order-no. Model Description Width A Thickness B Length L
T005 44 441 99 LTR A Chisel tip (1 piece) 1,6 mm 0,8 mm 17,0 mm
T005 44 441 10 (10 pieces)
T005 44 422 99 LTR B Chisel tip 1,5 mm
wettable (1 piece) 2,4 mm 0,8 mm 17,0 mm
T005 44 422 10 (10 pieces)
T005 44 422 71 (1 piece) none wettable 2,4 mm 0,8 mm 17,0 mm
T005 44 433 99 LTR C Chisel tip (1 piece) 3,2 mm 0,8 mm 17,0 mm
T005 44 433 10 (10 pieces) 3,2 mm 0,8 mm 17,0 mm
Special tips on request
LT Soldering Tips with twist lock
For use with soldering robot application with heating element HER 80
SMT Adapter + Tips
for LR 21, WP 80, WSP 80, WSP 80FE, WSP 80IG and MPR 80
Order-no. Model Description
T005 44 417 99 SMT SMT Adapter for WSP 80
SMTA SMTA SMT Adapter for LR 21
SMT0504A SMT0504A A/1, for components 1,0 x 1,2 mm, 12 x 1,0 mm, 1,2 x 1,2 mm, 1,6 x 0,8 mm
SMT1206D SMT1206D D/1, for components 3,2 x 1,6 mm, 3,2 x 2,5 mm
SMT8K SMT8K K/2, for components 5,0 x 4,0 mm
www.labem.pl
183
Soldering Tips
Soldering Tips for Soldering irons WSP 150
Order-no. Model Description Width A Thickness B
T005 44 455 99 LHT C Chisel tip 3,2 mm 1,2 mm
T005 44 452 99 LHT D Chisel tip 4,7 mm 1,8 mm
T005 44 451 99 LHT E Chisel tip 6,7 mm 1,8 mm
T005 44 450 99 LHT F Chisel tip 9,3 mm 1,8 mm
T005 44 513 99 LHT CX Chisel tip bent 3,2 mm 1,2 mm
T005 44 462 99 LHT DX Chisel tip bent 5,0 mm 2,0 mm
T005 44 461 99 LHT EX Chisel tip bent 7,0 mm 2,0 mm
T005 44 460 99 LHT FX Chisel tip bent 9,2 mm 2,0 mm
T005 44 456 99 LHT D 45° Sloped 45° for solar cell production 1,8 mm
T005 44 454 99 LHT Screw in tip with outside thread M6
T005 44 453 99 LHT Measuring tip for thermoelement Ø 0,5 mm
T005 87 447 95 Box nut WSP 150
LHT Soldering Tip Series
www.labem.pl
184
Soldering Tips
Soldering Tips for Soldering irons LR 21
Order-no. Model Description Width A Thickness B
4ETS ET S Longform Conical Ø 0,4 mm
4ETO ET O Longform Conical Ø 0,8 mm
4ETR ET R Chisel tip slim 1,6 mm 0,7 mm
4ETH ET H Chisel tip 0,8 mm 0,4 mm
4ETA ET A Chisel tip 1,6 mm 0,7 mm
4ETB ET B Chisel tip 2,4 mm 0,8 mm
4ETC ET C Chisel tip 3,2 mm 0,8 mm
4ETD ET D Chisel tip 4,6 mm 0,8 mm
4ETE ET E Chisel tip 5,6 mm 1,2 mm
4ETK ET K Chisel tip long 1,2 mm 0,4 mm
4ETL ET L Chisel tip long 2,0 mm 1,0 mm
4ETM ET M Chisel tip long 3,2 mm 1,2 mm
4ETF ET F Round tip sloped 45° Ø 1,2 mm
4ETBB ET BB Round tip sloped 45° Ø 2,4 mm
4ETCC ET CC Round tip sloped 45° Ø 3,2 mm
4ETP ET P Round tip blunt Ø 0,8 mm
4ETBS ET BS Round tip blunt Ø 2,4 mm
4ETCS ET CS Round tip blunt Ø 3,2 mm
T005 41 039 99 ET SMD Chip soldering / desoldering tip, component size 2,5 mm x 1,5 mm
T005 41 040 99 ET SMD Chip soldering / desoldering tip, component size 3,8 mm x 1,5 mm
T005 41 045 99 ET GW Gullwing tip
T005 41 703 99 Screw in tip with M5 outside thread
T005 24 750 99 ET Measuring tip for thermoelement Ø 0,5 mm
T005 10 311 99 Barrel
ET-LT Adapter
Soldering tips of the LT series are used with an adapter in the soldering iron LR 21.
Order-no. Model Description
T005 87 207 81 ET-LT Adaptor with barrel for use with LT series tips
with LR 21 and FE 50 soldering irons
T005 87 207 94 Spare barrel for ET-LT Adapter
ET Soldering Tip Series
■T005XXXXX99 = 1 Piece
■T005XXXXX10 = 10 Pieces
■T005XXXXX11 = 100 Pieces
www.labem.pl
185
Soldering Tips
Soldering Tips for Soldering irons LR 82 and FE 80
Order-no. Model Description Width A Thickness B
T005 44 260 99 HT 1 Chisel tip 3,2 mm 1,0 mm
T005 44 261 99 HT 2 Chisel tip 5,2 mm 1,2 mm
T005 44 262 99 HT 3 Chisel tip 7,0 mm 1,2 mm
T005 44 267 99 HT C Chisel tip long 3,2 mm 1,0 mm
T005 44 268 99 HT D Chisel tip long 4,6 mm 1,0 mm
T005 44 269 99 HT E Chisel tip long 5,6 mm 1,0 mm
T005 44 264 99 HT BS Round tip Ø 2,4 mm
T005 44 265 99 HT CS Round tip Ø 3,2 mm
T005 44 266 99 HT DS Round tip Ø 5,0 mm
T005 44 270 99 HT Screw in tip with outside thread M8nde
T005 44 263 99 HT Measuring tip for thermoelement Ø 0,5 mm
T005 26 202 99 Barrel
Tweezer Tips for WTA 50
Order-no. Model Description Width A Thickness B
T005 44 145 99 WTA 1S Tip set bent 45° 0,5 mm 0,5 mm
T005 44 141 99 WTA 1 Tip set bent 45° 1,0 mm 0,5 mm
T005 44 146 99 WTA 2 Tip set bent 45° 3,0 mm 0,5 mm
T005 44 147 99 WTA 3 Tip set bent 45° 6,0 mm 0,5 mm
T005 44 143 99 WTA 4 Tip set bent 45° 12,5 mm 0,5 mm
T005 44 144 99 WTA 5 Tip set bent 45° 18,5 mm 0,5 mm
T005 44 152 99 WTA 11 Tip set for vertical use 1,0 mm 0,5 mm
T005 44 153 99 WTA 12 Tip set for vertical use 3,0 mm 0,5 mm
T005 44 149 99 WT Measuring tip for thermoelement Ø 0,5 mm
HT Soldering Tip Series
WTA Soldering Tip Series
www.labem.pl
186
Soldering Tips
Soldering Tips for TCPS, TCP 12, TCP 24
Order-no. Model Description Width A Dicke B
4PTR7 PT R7 Chisel tip slim 370°C 1,6 mm 0,7 mm
4PTR8 PT R8 Chisel tip slim 425°C 1,6 mm 0,7 mm
4PTH6 PT H6 Chisel tip 310°C 0,8 mm 0,4 mm
4PTH7 PT H7 Chisel tip 370°C 0,8 mm 0,4 mm
4PTH8 PT H8 Chisel tip 425°C 0,8 mm 0,4 mm
4PTA6 PT A6 Chisel tip 310°C 1,6 mm 0,7 mm
4PTA7 PT A7 Chisel tip 370°C 1,6 mm 0,7 mm
4PTA8 PT A8 Chisel tip 425°C 1,6 mm 0,7 mm
4PTB6 PT B6 Chisel tip 310°C 2,4 mm 0,8 mm
4PTB7 PT B7 Chisel tip 370°C 2,4 mm 0,8 mm
4PTB8 PT B8 Chisel tip 425°C 2,4 mm 0,8 mm
4PTB9 PT B9 Chisel tip 480°C 2,4 mm 0,8 mm
4PTC7 PT C7 Chisel tip 370°C 3,2 mm 0,8 mm
4PTC8 PT C8 Chisel tip 425°C 3,2 mm 0,8 mm
4PTC9 PT C9 Chisel tip 480°C 3,2 mm 0,8 mm
4PTD7 PT D7 Chisel tip 370°C 4,6 mm 0,8 mm
4PTD8 PT D8 Chisel tip 425°C 4,6 mm 0,8 mm
4PTD9 PT D9 Chisel tip 480°C 4,6 mm 0,8 mm
4PTE8 PT E8 Chisel tip 425°C 5,6 mm 1,2 mm
4PTE9 PT E9 Chisel tip 480°C 5,6 mm 1,2 mm
4PTK6 PT K6 Chisel tip long 310°C 1,2 mm 0,4 mm
4PTK7 PT K7 Chisel tip long 370°C 1,2 mm 0,4 mm
4PTK8 PT K8 Chisel tip long 425°C 1,2 mm 0,4 mm
4PTL6 PT L6 Chisel tip long 310°C 2,0 mm 1,0 mm
4PTL7 PT L7 Chisel tip long 370°C 2,0 mm 1,0 mm
4PTL8 PT L8 Chisel tip long 425°C 2,0 mm 1,0 mm
4PTM7 PT M7 Chisel tip long 370°C 3,2 mm 1,2 mm
4PTM8 PT M8 Chisel tip long 425°C 3,2 mm 1,2 mm
4PTM9 PT M9 Chisel tip long 480°C 3,2 mm 1,2 mm
T005 41 307 99 PT MX7 Chisel tip bent, 3,2 mm 1,2 mm
1 side wettable 370°C
4PTCS7 PT CS7 Round tip 370°C Ø 3,2 mm
4PTDS7 PT DS7 Round tip 370°C Ø 5,0 mm
4PTS7 PT S7 Round tip long 370°C Ø 0,4 mm
4PTS8 PT S8 Round tip long 425°C Ø 0,4 mm
4PTO6 PT O6 Round tip long 310°C Ø 0,8 mm
4PTO7 PT O7 Round tip long 370°C Ø 0,8 mm
4PTO8 PT O8 Round tip long 425°C Ø 0,8 mm
PT Soldering Tip Series
www.labem.pl
187
Soldering Tips
Continuation page 186, further soldering tips for TCPS, TCP 12, TCP 24
PT-LT Adapter for TCPS, TCP 12,TCP 24
Order-no. Model Description Width A Thickness B
4PTF7 PT F7 Round tip sloped 370°C Ø 1,2 mm
4PTF8 PT F8 Round tip sloped 425°C Ø 1,2 mm
4PTAA7 PT AA7 Round tip sloped 370°C Ø 1,6 mm
4PTAA8 PT AA8 Round tip sloped 425°C Ø 1,6 mm
4PTAA9 PT AA9 Round tip sloped 480°C Ø 1,6 mm
4PTBB7 PT BB7 Round tip sloped 370°C Ø 2,4 mm
4PTBB8 PT BB8 Round tip sloped 425°C Ø 2,4 mm
4PTBB9 PT BB9 Round tip sloped 480°C Ø 2,4 mm
4PTCC7 PT CC7 Round tip sloped 370°C Ø 3,2 mm
4PTCC8 PT CC8 Round tip sloped 425°C Ø 3,2 mm
4PTCC9 PT CC9 Round tip sloped 480°C Ø 3,2 mm
4PTDD7 PT DD7 Round tip sloped 370°C Ø 5,0 mm
4PTDD8 PT DD8 Round tip sloped 425°C Ø 5,0 mm
4PTDD9 PT DD9 Round tip sloped 480°C Ø 5,0 mm
If other soldering tip dimensions are required, please use LT tips with the PT/LT adapter.
Order-no. Model Description
T005 87 207 86 PT6-LT PT6-LT-adapter with barrel 310°C
T005 87 207 87 PT7-LT PT7-LT-adapter with barrel 370°C
T005 87 207 88 PT8-LT PT8-LT-adapter with barrel 425°C
T005 87 207 89 PT9-LT PT9-LT-adapter with barrel 480°C
T005 87 207 94 Spare barrel for PT/LT adapter
Soldering tips of LT soldering tip series are used with an adapter
in soldering iron TCPS, TCP 12 and TCP 24.
All TCP and LR 21 soldering irons are delivered with the adapter.
www.labem.pl
188
Soldering Tips
Soldering Tips for W 61
Order-no. Model Description Width A
4CT5A6 CT5 A6 Chisel tip 310°C 1,6 mm
4CT5A7 CT5 A7 Chisel tip 370°C 1,6 mm
4CT5A8 CT5 A8 Chisel tip 425°C 1,6 mm
4CT5B7 CT5 B7 Chisel tip 370°C 2,4 mm
4CT5B8 CT5 B8 Chisel tip 425°C 2,4 mm
4CT5C6 CT5 C6 Chisel tip 310°C 3,2 mm
4CT5C7 CT5 C7 Chisel tip 370°C 3,2 mm
4CT5C8 CT5 C8 Chisel tip 425°C 3,2 mm
4CT5D7 CT5 D7 Chisel tip 370°C 4,7 mm
4CT5D8 CT5 D8 Chisel tip 425°C 4,7 mm
T005 42 107 99 CT5 AX7 Chisel tip bent 370°C 1,6 mm
T005 42 108 99 CT5 AX8 Chisel tip bent 425°C 1,6 mm
T005 42 117 99 CT5 BX7 Chisel tip bent 370°C 2,4 mm
T005 42 128 99 CT5 CX8 Chisel tip bent 425°C 3,2 mm
T005 42 138 99 CT5 DX8 Chisel tip bent 425°C 5,0 mm
CT5 Soldering Tip Series
■T005XXXXX99 = 1 Piece
■T005XXXXX10 = 10 Pieces
■T005XXXXX11 = 100 Pieces
www.labem.pl
189
Soldering Tips
Soldering Tips for W 101
Order-no. Model Description Width A
4CT6C7 CT6 C7 Chisel tip 370°C 3,2 mm
4CT6C8 CT6 C8 Chisel tip 425°C 3,2 mm
4CT6D7 CT6 D7 Chisel tip 370°C 5,0 mm
4CT6D8 CT6 D8 Chisel tip 425°C 5,0 mm
4CT6E7 CT6 E7 Chisel tip 370°C 7,0 mm
4CT6E8 CT6 E8 Chisel tip 425°C 7,0 mm
T005 42 307 99 CT6 CX7 Chisel tip bent 370°C 3,2 mm
T005 42 318 99 CT6 DX8 Chisel tip bent 425°C 5,0 mm
Welding wedge
Adapter
For use with LHT tips (page 183) and soldering iron W 101
Order-no. Description
T005 11 767 99 Welding wedge Teflon-coated,50 x 40 x 4 mm
(260°C–295°C) for W 101SP with twist lock
T005 11 767 74 Welding wedge PTFE-coated, 50 x 40 x 4 mm
for W 201 (260°C – 295°C)
Order-no. Model Description
T005 61 046 67 CT6-7 Adapter for LHT tips, 370°
T005 61 046 68 CT6-8 Adapter for LHT tips, 425°
T005 61 046 69 CT6-9 Adapter for LHT tips, 480°
CT6 Soldering Tip Series
www.labem.pl
190
Soldering Tips
Soldering Tips for W 201
Order-no. Model Description Width A
T005 42 407 99 CT2 E7 Chisel tip 370°C 7,0 mm
T005 42 408 99 CT2 E8 Chisel tip 425°C 7,0 mm
T005 42 417 99 CT2 F7 Chisel tip 370°C 10,0 mm
T005 42 418 99 CT2 F8 Chisel tip 425°C 10,0 mm
T005 42 428 99 CT2 G8 Chisel tip 425°C 11,0 mm
T005 42 507 99 CT2 EX7 Chisel tip bent 370°C 7,0 mm
T005 42 508 99 CT2 EX8 Chisel tip bent 425°C 7,0 mm
T005 42 517 99 CT2 FX7 Chisel tip bent 370°C 10,0 mm
T005 42 518 99 CT2 FX8 Chisel tip bent 425°C 10,0 mm
CT2 Soldering Tip Series
■T005XXXXX99 = 1 Piece
■T005XXXXX10 = 10 Pieces
■T005XXXXX11 = 100 Pieces
www.labem.pl
191
Soldering Tips
Soldering tips for soldering iron SPI 16
Soldering tips for soldering iron SPI 41
Soldering tips for soldering iron SPI 81
Soldering tips for soldering iron SPI 27
Order-no. Model Description Width A
4SPI15 210 SPI15 210 Needle tip 0,4 mm
4SPI15 213 SPI15 213 Needle tip 0,8 mm
4SPI15 212 SPI15 212 Chisel tip 1,2 mm
4SPI15 211 SPI15 211 Chisel tip 2,0 mm
Order-no. Model Description Width A
4SPI40224 SPI40 224 Chisel tip 2,0 mm
4SPI40225 SPI40 225 Chisel tip 3,0 mm
4SPI40220 SPI40 220 Chisel tip 5,0 mm
4SPI40226 SPI40 226 Chisel tip bent 2,0 mm
Order-no. Model Description Width A
4SPI80234 SPI80 234 Chisel tip 3,0 mm
4SPI80235 SPI80 235 Chisel tip 5,0 mm
4SPI80230 SPI80 230 Chisel tip 7,0 mm
4SPI80231 SPI80 231 Chisel tip 9,5 mm
4SPI80237 SPI80 237 Chisel tip bent 5,0 mm
4SPI80232 SPI80 232 Chisel tip bent 7,0 mm
Order-no. Model Description Width A
4SPI26206 SPI26 206 Chisel tip 1,2 mm
4SPI26200 SPI26 200 Chisel tip 2,0 mm
4SPI26201 SPI26 201 Chisel tip 3,0 mm
SPI Soldering Tip Series
www.labem.pl
192
Soldering Tips
Soldering Tips for WP 60
Order-no. Model Description Width A
T005 16 134 99 60-01-05 Needle tip Ø 0,5 mm
T005 16 443 99 60-01-01 Needle tip Ø 1,0 mm
T005 16 444 99 60-01-02 Chisel tip 2,4 mm
T005 16 446 99 60-01-04 Chisel tip 5,0 mm
T005 16 445 99 60-01-03 Round tip sloped 45° Ø 2,0 mm
T005 16 447 99 60-01-52 Hot air nozzle Ø 4,7 mm
T005 16 135 99 60-01-06 Knife 45° 5,0 mm
T005 16 448 99 60-07U Ejector unit
T005 16 450 99 60-02 Protective cap for WP 60 (spare part)
■T005XXXXX99 = 1 Piece
■T005XXXXX10 = 10 Pieces
■T005XXXXX11 = 100 Pieces
Soldering Tips for Pyropen Jr.
Order-no. Model Description Width A
T005 16 165 99 71-01-01 Needle tip Ø 1,0 mm
T005 16 166 99 71-01-02 Chisel tip 2,0 mm
T005 16 161 99 71-01-04 Chisel tip 5,0 mm
T005 16 167 99 71-01-03 Round tip sloped 45° Ø 2,0 mm
T005 16 168 99 71-01-50 Hot air nozzle Ø 1,5 mm
T005 16 169 99 71-01-52 Hot air nozzle Ø 4,7 mm
T005 16 172 99 71-07U Ejector unit
www.labem.pl
193
Soldering Tips
Soldering Tips for Pyropen and Pyropen Piezo
Order-no. Model Description Diameter Ø Width A
T005 16 120 99 70-01-01 Needle tip Ø 1,0 mm
T005 16 124 99 70-01-05 Needle tip extra slim Ø 0,5 mm
T005 16 129 99 70-01-10 Needle tip bent 30° Ø 1,0 mm
T005 16 121 99 70-01-02 Chisel tip 3,0 mm
T005 16 132 99 70-01-13 Chisel tip 5,0 mm
T005 16 130 99 70-01-11 Chisel tip 7,7 mm
T005 16 122 99 70-01-03 Round tip sloped Ø 2,0 mm
T005 16 123 99 70-01-04 Round tip sloped Ø 3,0 mm
T005 16 125 99 70-01-06 Round tip sloped, conical Ø 2,0 mm
T005 16 127 99 70-01-08 Round tip sloped 35° Ø 2,0 mm
T005 16 140 99 70-01-50 Hot air nozzle Ø 1,7 mm
T005 16 141 99 70-01-51 Hot air nozzle Ø 3,3 mm
T005 16 142 99 70-01-52 Hot air nozzle Ø 4,9 mm
T005 16 143 99 70-01-53 Hot air nozzle Ø 7,0 mm
T005 16 151 99 70-07TU Ejector unit, not for Piezo
T005 16 150 99 70-07SU Solder ejector, not for Piezo
T005 16 159 99 70-01-55 Reflector for Ø 6,0 mm 18,0 mm
heat shrinking
T005 16 158 99 70-01-54 Reflector for Ø 8,0 mm 22,0 mm
heat shrinking
www.labem.pl
194
Order-no. Model Description Outer Ø Inner Ø Nozzle Length
T005 13 140 00 DX 110 Nozzle (1 piece) 1,9 mm 0,7 mm 25 mm
T005 13 140 10 (10 pieces)
T005 13 141 00 DX 111 Nozzle (1 piece) 2,5 mm 0,7 mm 25 mm
T005 13 141 10 (10 pieces)
T005 13 142 00 DX 112 Nozzle (1 piece) 2,3 mm 1,0 mm 25 mm
T005 13 142 10 (10 pieces)
T005 13 143 00 DX 113 Nozzle (1 piece) 2,5 mm 1,2 mm 25 mm
T005 13 143 10 (10 pieces)
T005 13 150 00 DX 113HM Nozzle (1 piece) 2,5 mm 1,2 mm 25 mm
with improved thermal transfer
T005 13 150 10 (10 pieces)
T005 13 144 00 DX 114 Nozzle (1 piece) 3,3 mm 1,8 mm 25 mm
T005 13 144 10 (10 pieces)
T005 13 145 00 DX 115 Nozzle (1 piece) 1,9 mm 0,7 mm 29 mm
T005 13 145 10 (10 pieces)
T005 13 146 00 DX 116 Nozzle (1 piece) 2,7 mm 1,2 mm 29 mm
T005 13 146 10 (10 pieces)
T005 13 147 00 DX 117 Nozzle (1 piece) 2,9 mm 1,5 mm 25 mm
T005 13 147 10 (10 pieces)
T005 13 148 00 DX 118 Nozzle (1 piece) 1,5 mm 0,7 mm 23 mm
T005 13 148 10 (10 pieces)
T005 13 151 00 DX 119 Needle tiplet (1 piece) with 1,1 mm 0,7 mm 33 mm
unwettable stainless steel tube
for removal of solder bridges
in connection with hot air pencil
T005 13 151 10 (10 pieces)
T005 13 152 00 DX 120 Nozzle (1 piece) without inside 2,5 mm 1,1 mm 22 mm
tube for cleaning SMD pads.
T005 13 152 10 (10 pieces)
T005 13 153 99 Measuring nozzle 3,3 mm 0,55 mm 21,5 mm
T005 87 067 94 Conus insert cleaning tool
T005 13 790 99 Nozzle -Set DX 110 - DX 115
Desoldering Nozzles
Desoldering nozzles with threadless fixture system for DSX 80 and DXV 80
The DX series tools feature a novel threadless desoldering nozzle fixture system whereby the nozzle is inserted into the head and
locked into place by applying a 1/4 turn. This patented feature allows the desoldering nozzles to be quickly and easily exchanged
and also improves the rate of thermal transfer from the desoldering head to the desoldering nozzle providing the tools with a
faster heat up time and recovery rate. Additionally, because there are no threads in the head to block, maintenance and costs are
reduced.
DX Desoldering Nozzle series
www.labem.pl
195
Desoldering Nozzles
Order-no. Model Description Outer Ø Inner Ø Nozzle Length
T005 13 510 99* DS 110 Nozzle 1,9 mm 0,7 mm 18 mm
T005 13 532 99* DS 110HM Nozzle 1,9 mm 0,7 mm 18 mm
with improved heat transfer
T005 13 511 99* DS 111 Nozzle 2,5 mm 0,7 mm 18 mm
T005 13 512 99* DS 112 Nozzle 2,3 mm 1,0 mm 18 mm
T005 13 533 99* DS 112HM Nozzle 1,9 mm 0,9 mm 18 mm
with improved heat transfer
T005 13 513 99* DS 113 Nozzle 2,5 mm 1,2 mm 18 mm
T005 13 530 99* DS 113HM Nozzle 2,5 mm 1,2 mm 18 mm
with improved heat transfer
T005 13 514 99* DS 114 Nozzle 3,3 mm 1,8 mm 18 mm
T005 13 515 99* DS 115 Nozzle 1,9 mm 0,7 mm 24,5 mm
T005 13 516 99* DS 116 Nozzle 2,7 mm 1,2 mm 24,5 mm
T005 13 550 99* DS 117 Nozzle 2,9 mm 1,5 mm 18 mm
T005 13 551 99* DS 118 Nozzle 1,5 mm 0,7 mm 18 mm
T005 13 527 99* DS 119 Needle tiplet with unwettable 1,9 mm 0,7 mm 26 mm
stainless steel tube for removal of
solder bridges in connection
with hot air pencil
T005 13 552 99* DS 120 Nozzle without inside tube, 2,5 mm 1,1 mm 15,5 mm
for cleaning SMD pads
T005 24 749 99* Measuring nozzle 3,3 mm 0,55 mm 18 mm
T005 13 770 99* Nozzle-Set DS 110 - DS 115
*Discontinuation
Desoldering nozzles with thread for DS 22, DS 80 and DSV 80
DS Desoldering nozzles
www.labem.pl
196
ESD
Order-no. Description
T005 13 500 99 Cleaning set complete
for cleaning desoldering nozzles and for nozzle exchange
consists of:
T005 87 488 61 Handle
T005 13 501 99 Replacement needle set 0,6 mm / 0,9 mm / 1,4 mm / 1,9 mm
consists of:
T005 13 502 99 Replacement needle set je 1 x 1,9 mm,3 x 0,9 mm
T005 13 503 99 Replacement needle set ,je 1 x 1,9 mm,3 x 0,5 mm
Cone Cleaner
T005 87 067 94 Cone insert – Cleaning tool
Desoldering Nozzles
Cleaning set for DS + DX nozzles
Order-no. Description
T005 87 658 01 PDN Pliers for changing nozzles
• For DX, XDS and XDSL nozzles
• Simple, safe and fast change of Weller desoldering nozzles.
• Especially designed grip for changing the nozzle without damaging the soldering tool.
• Ergonomic design for easy handling.
• ESD safe soft grip. For all ESD work places.
• Save and easy embracement for professional desoldering nozzle change.
fachgerechten Wechsel der Entlötdüse
• Highest Weller product quality for long lifetime. Made in Germany.
• Fast cleaning process saves maintenance costs.
www.labem.pl
197
Desoldering Nozzles
Order-no. Model Description Inner Ø Outer Ø Nozzle Length
T005 13 250 99 XDS 1 Nozzle (1 piece) 1,4 mm 2,5 mm 10,5 mm
T005 13 250 10 (10 pieces)
T005 13 251 99 XDS 2 Nozzle (1 piece) 3,0 mm 5,3 mm 10,5 mm
T005 13 251 10 (10 pieces)
T005 13 252 99 XDS 3 Nozzle (1 piece) 1,0 mm 2,3 mm 10,5 mm
T005 13 252 10 (10 pieces)
T005 13 253 99 XDS 4 Nozzle (1 piece) 1,2 mm 2,5 mm 10,5 mm
T005 13 253 10 (10 pieces)
T005 13 254 99 XDS 5 Nozzle (1 piece) 1,8 mm 3,3 mm 10,5 mm
T005 13 254 10 (10 pieces)
T005 13 255 99 XDS 6 Nozzle (1 piece) 0,7 mm 1,9 mm 16,5 mm
T005 13 255 10 (10 pieces)
T005 13 256 99 XDS 7 Nozzle (1 piece) 1,2 mm 2,7 mm 16,5 mm
T005 13 256 10 (10 pieces)
T005 13 257 99 XDS 8 Nozzle (1 piece) 1,5 mm 2,9 mm 10,5 mm
T005 13 257 10 (10 pieces)
T005 13 258 99 XDS 9 Measuring tip (1 piece)
T005 13 259 99 XDSL 1 Nozzle (1 Stück) 1,4 mm 2,5 mm 10,5 mm
T005 13 259 10 (10 Stück)
T005 13 260 99 XDSL 2 Nozzle (1 piece) 3,0 mm 5,3 mm 10,5 mm
T005 13 260 10 (10 piece)
T005 13 261 99 XDSL 3 Nozzle (1 Stück) 1,0 mm 2,3 mm 10,5 mm
T005 13 261 10 (10 Stück)
T005 13 262 99 XDSL 4 Nozzle (1 piece) 1,2 mm 2,5 mm 10,5 mm
T005 13 262 10 (10 Stück)
T005 13 263 99 XDSL 5 Nozzle (1 piece) 1,8 mm 3,3 mm 10,5 mm
T005 13 263 10 (10 Stück)
T005 13 264 99 XDSL 6 Nozzle (1 piece) 0,7 mm 1,9 mm 16,5 mm
T005 13 264 10 (10 piece)
T005 13 265 99 XDSL 7 Nozzle (1 Stück) 1,2 mm 2,7 mm 16,5 mm
T005 13 265 10 (10 piece)
T005 13 266 99 XDSL 8 Nozzle (1 piece) 1,5mm 2,9 mm 10,5 mm
T005 13 266 10 (10 piece)
XDS Desoldering nozzle series
Desoldering nozzles for DSX 120, WXDP 120, WXDV 120
Order-no. Description
T005 87 657 73 Cleaning Set complete
T005 87 657 72 Cone Cleaner
Maintenance tool for XDS Nozzles ■T005XXXXX99 = 1 Piece
■T005XXXXX10 = 10 Pieces
www.labem.pl
198
Order-no. Model Description Width A Thickness B
T005 87 617 28 Adapter M6 for HAP 200
T005 87 277 74 F02 Flat nozzle 8,0 mm 1,5 mm
T005 87 277 73 F04 Flat nozzle 10,5 mm 1,5 mm
T005 87 277 72 F06 Flat nozzle 12,0 mm 1,5 mm
Order-no. Model Description Diameter D Distance C Length C
T005 87 278 23 R02 Round nozzle Ø 0,8 mm
T005 87 278 21 R04 Round nozzle Ø 1,2 mm
T005 87 278 22 R06 Round nozzle Ø 3,0 mm
T005 87 277 87 R10 Round nozzle long Ø 2,0 mm 50 mm
T005 87 277 86 R08 Round nozzle long Ø 2,0 mm 50 mm
bent
T005 87 277 76 FD2 Dual nozzle Ø 1,5 mm 8 mm
T005 87 277 75 FD4 Dual nozzle Ø 1,5 mm 10 mm
Hot air nozzles for HAP 1, HAP 200 and WXHAP 200
Hot air nozzles for HAP 1, HAP 200 and WXHAP 200
Hot Air Nozzles
www.labem.pl
199
Order-no. Model Description Length X Width Y
T005 87 277 79 D04 Hot air nozzle, 2 sides heated 10,5 mm 10,5 mm
with pre-heating plate
T005 87 277 82 D06 Hot air nozzle, 2 sides heated 13,0 mm 10,0 mm
with pre-heating plate
T005 87 277 81 D08 Hot air nozzle, 2 sides heated 15,0 mm 10,0 mm
with pre-heating plate
T005 87 277 84 D10 Hot air nozzle, 2 sides heated 18,0 mm 10,0 mm
with pre-heating plate
Order-no. Model Description Length X Width Y
T005 87 277 77 Q02 Hot air nozzle, 4 sides heated 6,0 mm 6,5 mm
T005 87 277 78 Q04 Hot air nozzle, 4 sides heated 6,0 mm 9,0 mm
T005 87 277 80 Q06 Hot air nozzle, 4 sides heated 15,0 mm 10,0 mm
with pre-heating plate
T005 87 277 83 Q08 Hot air nozzle, 4 sides heated 12,5 mm 15,0 mm
with pre-heating plate
T005 87 278 12 SK709 Hot air nozzle, 4 sides heated 12,0 mm 12,0 mm
with pre-heating plate
T005 87 277 85 Q10 Hot air nozzle, 4 sides heated 18,0 mm 18,0 mm
with pre-heating plate
T005 87 278 08 R01 Measuring nozzle for calibration
Hot air nozzles for HAP 1, HAP 200 and WXHAP 200
2 sides heated (Type D, Length X =heated side)
Hot air nozzles for HAP 1, HAP 200 and WXHAP 200
4 sides heated (Type Q)
Hot Air Nozzles
www.labem.pl
200
005 87 578 93
005 87 578 94
"c
lick"
005 87 578 92
005 87 578 99
The ND and NQ nozzles have an integrated pre-heating plate
for pre-heating components by means of contact heat.
Air outlet slots are located around the plate with a width
of approx. 1 mm for the hot air.
Order-no. Model Description Diameter Ø
T005 87 368 81 NR04 Round nozzle, without vacuum Ø 2,5 mm
T005 87 368 67 NR05 Round nozzle, without vacuum Ø 4,0 mm
T005 87 368 70 NR10 Round nozzle, without vacuum Ø 7,0 mm
T005 87 507 70 NRV07 Hot air nozzle Ø 7,0 mm
with vacuum for small components
T005 87 507 72 NRV10 Hot air nozzle Ø 10,0 mm
with vacuum for small components
T005 87 507 74 NRV12 Hot air nozzle Ø 12 mm
with vacuum for small components
T005 87 368 82 NR02 Round nozzle, bent Ø 1,7 mm x 45°
without vacuum
T005 87 507 65 NR06 Round nozzle, bent Ø 6,0 mm x 45°
without vacuum
T005 87 368 83 DR05 Dual nozzle round, without vacuum 2 x Ø 2,5 mm
Hot air nozzles for HAP 3000 (WHA 3000P / V),
HAP 2 (WHA 2000) and HAP 3 (WHA 700, WHA 300)
Hot Air Nozzles
www.labem.pl
201
Order-no. Model Description Length X Width Y
T005 87 368 43 ND05 Hot air nozzle, 2 sides heated 10,7 mm 10,7 mm
T005 87 368 42 ND 10 Hot air nozzle, 2 sides heated 14,0 mm 10,0 mm
T005 87 368 41 ND 15 Hot air nozzle, 2 sides heated 19,0 mm 12,0 mm
T005 87 368 40 ND 20 Hot air nozzle, 2 sides heated 21,5 mm 14,8 mm
T005 87 369 32 ND SK535/A Hot air nozzle, without edge 8,5 mm 20,0 mm
for thin components
T005 87 369 33 ND SK535/B Hot air nozzle, without edge 10,5 mm 20,0 mm
for thin components
T005 87 507 34 ND SK699 Hot air nozzle, without edge 12,5 mm 20,0 mm
for thin components
T005 87 369 34 ND SK535/C Hot air nozzle, without edge 14,0 mm 20,0 mm
for thin components
2 sides heated (Type ND, Width X = heated side)
Hot Air Nozzles
www.labem.pl
202
Order-no. Model Description Length X Width Y
T005 87 368 39 NQ05 Hot air nozzle, 4 sides heated 10,7 mm 10,7 mm
T005 87 368 38 NQ15 Hot air nozzle, 4 sides heated 14,5 mm 10,0 mm
T005 87 368 18 NQ10 Hot air nozzle, 4 sides heated 14,8 mm 14,8 mm
T005 87 368 37 NQ20 Hot air nozzle, 4 sides heated 15,5 mm 13,0 mm
T005 87 368 14 NQ25 Hot air nozzle, 4 sides heated 18,0 mm 18,0 mm
T005 87 507 21 NQ30 Hot air nozzle, 4 sides heated 17,5 mm 23,5 mm
T005 87 368 07 NQ35 Hot air nozzle, 4 sides heated 20,5 mm 20,5 mm
T005 87 368 80 NQ Hot air nozzle, 4 sides heated 24,0 mm 12,0 mm
T005 87 368 04 NQ40 Hot air nozzle, 4 sides heated 26,0 mm 26,0 mm
T005 87 368 33 NQ45 Hot air nozzle, 4 sides heated 31,3 mm 31,3 mm
T005 87 368 91 NQ50 Hot air nozzle, 4 sides heated 36,0 mm 36,0 mm
T005 87 368 90 NQ55 Hot air nozzle, 4 sides heated 43,0 mm 43,0 mm
Four sides heated (Type NQ)
Hot Air Nozzles
www.labem.pl
203
Order-no. Model Description Length X Width Y
T005 87 507 41 NQT 10 Hot air nozzle, 4 sides heated, 14,8 mm 14,8 mm
without protruding edge for
thin components
T005 87 507 42 NQT25 Hot air nozzle, 4 sides heated, 18,0 mm 18,0 mm
without protruding edge for
thin components
T005 87 507 39 NQT Hot air nozzle, 4 sides heated, 22,0 mm 22,0 mm
without protruding edge for
thin components
T005 87 368 75 NA 20 Measuring nozzle for calibration
Special tips on request
Order-no. Description
T005 87 137 99 Ø 4,5 mm, 10 pieces
T005 87 137 98 Ø 10,0 mm, 10 pieces
4 sides heated (Type NQ) continuation
Rubber insert for CSF heads (spare)
Hot Air Nozzles
Order-no. Description
T005 87 578 92 Pre heating nozzle for HAP 3
Pre heating nozzle for HAP 3
Order-no. Description
T005 15 048 99 Multi rest for nozzle NR, ND NQ
Multi rest
www.labem.pl
204
The patented hot air nozzles of the WQB rework systems,
coupled with digital control of the hot air temperature and
its flow rate provide an even convective heating of the com-
ponent. This in turn ensures reatability of the reflow process.
Order-no. Nozzle housing inside Nozzle housing outside
T005 87 479 47 7,6 x 7,99 mm 8,6 x 8,9 mm
T005 87 479 43 6,5 x 6,5 mm 7,5 x 7,5 mm
T005 87 479 45 8,5 x 8,5 mm 9,5 x 9,5 mm
T005 87 479 61 8,5 x 10,6 mm 9,5 x 11,6 mm
T005 87 549 67 10,0 x 10,0 mm 11,0 x 11,0 mm
T005 87 478 48 12,0 x 12,0 mm 13,0 x 13,0 mm
T005 87 479 04 13,5 x 13,5 mm 14,3 x 14,3 mm
T005 87 479 35 15,5 x 15,5 mm 16,5 x 16,5 mm
T005 87 478 93 15,0 x 11,0 mm 16,0 x 12,0 mm
T005 87 548 36 18,5 x 10,0 mm 19,5 x 11,0 mm
T005 87 479 77 15,5 x 23,5 mm 16,5 x 24,5 mm
T005 87 478 33 18,0 x 18,0 mm 20,0 x 20,0 mm
T005 87 547 70 21,0 x 21,0 mm 23,0 x 23,0 mm
T005 87 548 20 22,0 x 22,0 mm 24,0 x 24,0 mm
T005 87 477 64 25,0 x 25,0 mm 27,0 x 27,0 mm
T005 87 479 93 27,0 x 23,0 mm 29,0 x 25,0 mm
T005 87 478 50 27,0 x 27,0 mm 29,0 x 29,0 mm
T005 87 479 27 29,0 x 29,0 mm 31,0 x 31,0 mm
T005 87 479 99 28,0 x 32,0 mm 30,0 x 34,0 mm
T005 87 479 06 33,0 x 33,0 mm 35,0 x 35,0 mm
T005 87 548 87 35,0 x 35,0 mm 37,0 x 37,0 mm
T005 87 477 53 37,0 x 37,0 mm 39,0 x 39,0 mm
T005 87 478 71 39,5 x 39,5 mm 41,5 x 41,5 mm
T005 87 478 74 42,0 x 42,0 mm 44,0 x 44,0 mm
T005 87 549 03 45,0 x 11,0 mm 47,0 x 13,0 mm
T005 87 477 63 46,0 x 46,0 mm 48,0 x 48,0 mm
T005 87 479 16 47,0 x 47,0 mm 49,0 x 49,0 mm
T005 87 479 41 49,0 x 49,0 mm 51,0 x 51,0 mm
T005 87 479 85 57,0 x 18,5 mm 59,0 x 20,0 mm
Special sizes on request
Hot air nozzle for WQB 4000SOPS
Hot Air Nozzles
www.labem.pl
205
Hot Air Nozzles
www.labem.pl
206206
Electric Screwdriver
“Power is nothing without control...“
Wide accessory program - analog or digital power
units, torque tester, tool connection cables as well as
a large bit portfolio
Flexible solutions
www.labem.pl
207
ESD
207
Noise level as of standard conversations
(below emission level in hospitals during day duty)
Ergonomic unit
Light and compact
ESD safe
No emission
No harmful carbon dust due to brushless motor
Brushless, maintenance free motor
Compatible units
Analog and digital power units, clutch systems or
electronic screwdrivers - all tools are compatible and
for different applications
Low running costs
Operational safety and environment pollution
Electric Screwdriver
www.labem.pl
208
WTS DWTS A
WBTS12L WBTS35L WTBS35ECL WBTS12P WBTS35P
Digital Power Unit Digital Power Unit
Accessories
W C A B 5 M
WTT5
W C A B 5 M S
W B A L
W A H 3 5
W A H 1 2
Electric Srewdriver
Photo similarPhoto similarPhoto similarPhoto similarPhoto similar
www.labem.pl
209
WTS DWTS A
WBTS12L WBTS35L WBTS35ECL WBTS12P WBTS35P
Technical data
Mains supply voltage 100 - 240 VAC
Speed control from 60% to 100% of nominal speed
Display no LED
Operation panel Simply rotary dial adjustment Text display
Torque range display no yes
Order-No. T005 39 016 99 T005 39 006 99
Electric Screwdriver
Rotational speed 650 UpM 800 UpM 800 UpM 650 UpM 800 UpM
Start Lever start Lever start Lever start Push to start Push to start
Torque range 0,05 - 1,2Nm 0,5 - 3,5 Nm 0,5 - 3,5 Nm 0,05 - 1,2Nm 0,5 - 3,5Nm
For use with 1/4“ bits 1/4“ 1/4“ 1/4“ 1/4“ 1/4“
Brushless, maitenance yes yes yes yes yes
free motor
Right and left rotation yes yes yes yes yes
Low noise <55dBA <55dBA <55dBA <55dBA <55dBA
Photo similar Photo similar Photo similar Photo similar Photo similar
www.labem.pl
210
Electric screwdriver
WTS A
WTS D
Order-No. Model Description
T005 39 016 99 WTS A Analogue Power Unit
Order-No. Model Description
T005 39 006 99 WTS D Digital Power Unit, recommended
ECL Electric Screwdriver
Simply rotary dial adjustment
Soft start capability
- ramp from 0 to 2 sec.
ESD compliant housing
Easy operation with text
display and simple program-
ming, multiple languages
Soft start capability - ramp
from 0 to 2 sec.
Suitable for complex
tightening applications
ESD compliant housing
www.labem.pl
211
WBTS12L Electric Screwdriver
WBTS35L Electric Screwdriver
WBTS35ECL Electric Screwdriver
WBTS12P Electric Screwdriver
WBTS35P Electric Screwdriver
Order-No. Model Description
T005 39 091 99 WBTS12L Electric Screwdriver with lever start
and 8-pin interface cable, connecting cable 2,5 m
Order-No. Model Description
T005 39 093 99 WBTS35L Electric Screwdriver with lever start
and 8-pin interface cable, connecting cable 2,5 m
Order-No. Model Description
T005 39 095 99 WBTS35ECL Electric Screwdriver with lever start
and 8-pin interface cable, connecting cable 2,5 m
Order-No. Model Description
T005 39 092 99 WBTS12P Electric Screwdriver push to start
and 8-pin interface cable, connecting cable 2,5 m
Order-No. Model Description
T005 39 094 99 WBTS35P Electric Screwdriver push to start
and 8-pin interface cable, connecting cable 2,5 m
Lever start
Torque setting via clutch
spring compression
Lever start
Torque setting via clutch
spring compression
Lever start
Torque setting via
digital controller
Push to start
Torque setting via clutch
spring compression
Push to start
Torque setting via clutch
spring compression
Electric Screwdriver
Photo similar
Photo similar
Photo similar
Photo similar
Photo similar
www.labem.pl
212
Accessories
WAH12 Angle head
WAH35 Angle head
WBAL Balancer
Order-No. Model Description
T005 87 677 01 WAH12 90° Angle head for WBTS12L
Order-No. Model Description
T005 87 677 02 WAH35 90° Angle head for WBTS35L
Order-No. Model Description
T005 87 677 03 WBAL Balancer
Especially for tight work spaces
Especially for tight work spaces
Working load limit from
0,4 to 1,0 kg
www.labem.pl
213
WCAB5M Connecting cable
WCAB5MS Connecting cable
WTT5 Torque tester
Order-No. Model Description
T005 87 677 04 WCAB5M Connecting cable 5 m, 8-pin
Order-No. Model Description
T005 87 677 05 WCAB5MS Connecting cable with twist 5 m, 8-pin
Order-No. Model Description
T005 87 677 06 WTT5 Torque tester from 0,2 until 5 Nm
Flexible connecting cable
Flexible connecting cable
with twist
Tester for screwdriver calibration
3 units of torque measurements
Automatic shut down
2 Display mode selectable
Battery powered or power supply
Electric Screwdriver
www.labem.pl
214
B
A
B
A
Phillips®-Bits
Pozidriv® Bits
Order-No. Point Size Overall Length Turned Length (A) Turned OD (B)
Inch mm Inch mm Inch mm
446-0X 0 1 25 7/16 11 0,108 4,06
446-1X 1 1 25 7/16 11 0,108 4,06
446-2X 2 1 25 7/16 11 0,108 4,06
Order-No. Point Size Overall Length Turned Length (A) Turned OD (B)
Inch mm Inch mm Inch mm
440-1-PZDX 1 1 25
440-2-PZDX 2 1 25
440-215-PZDX 2 11/2 38
440-22-PZDX 2 2 51
440-3-PZDX 3 1 25
440-4-PZDX 4 11/4 32
446-1-PZDX * 1 1 25 7/16 11 0,18 4,6
446-2-PZDX * 2 1 25 7/16 11 0,18 4,6
1/4“ Hex Insert Bits -
Limited Clearance
1/4“ Hex Insert Bits
Suitable Bits and Drive
www.labem.pl
215
Slotted Bits
Torx® Bits
Order-No. Screw Size Length Blade Thickness Blade Width
Inch mm Inch mm Inch mm
445-000X 1F-2R 1 25 ,021 ,53 ,125 3,2
445-00X 2F-3R 1 25 ,025 ,64 ,140 3,6
445-0X 3F-4R 1 25 ,030 ,76 ,154 3,9
445-10X 4F-5R 1 25 ,034 ,86 ,185 4,7
445-20X 5F-6R 1 25 ,036 ,91 ,216 5,5
445-30X 6F-7R 1 25 ,038 ,97 ,248 6,3
Order-No. Point Size Overall Length
Inch mm
440-TX-05X T-5 1 25
440-TX-06X T-6 1 25
440-TX-07X T-7 1 25
440-TX-08X T-8 1 25
440-TX-09X T-9 1 25
440-TX-10X T-10 1 25
440-TX-15X T-15 1 25
440-TX-20X T-20 1 25
440-TX-25X T-25 1 25
440-TX-27X T-27 1 25
440-TX-30X T-30 1 25
440-TX-40X T-40 1 25
1/4“ Hex Insert Bits -
Limited Clearance
1/4“ Hex Insert Bits
Electric Screwdriver
www.labem.pl
216
Socket Head Bits
Bit Holder
Order-No. Point Size Overall Length
Inch mm
185-1.5MM 1,5 mm 1 25
185-2MM 2,0 mm 1 25
185-2.5MM 2,5 mm 1 25
185-3MM 3,0 mm 1 25
185-4MM 4,0 mm 1 5/16 33
185-5MM 5,0 mm 1 5/16 33
185-6MM 6,0 mm 1 5/16 33
185-7MM 7,0 mm 1 1/4 32
185-8MM 8,0 mm 1 1/4 32
185-9MM 9,0 mm 1 1/4 32
185-10MM 10,0 mm 1 1/4 32
Order-No. Size Overall Length mm
M-490-2 2 51 Magnetic
M-490-NR 2 31/32 75 Magnetic; No lock ring
M-490 2 31/32 75 Magnetic
M-497 3 3/32 Magnetic; 3/8“ (9,5 mm) reduced dia.
1/4“ Hex Insert Bits - Metric
Hex Drive for 1/4“ Hex Inserts
Suitable Bits and Drive
www.labem.pl
217
Slotted Drive
Order-No. Screw Size Length Blade Thickness Blade Width / Body Ø
Inch mm Inch mm Inch mm
320-000X 1F-2R 1 15/16 49 ,022 ,56 ,122 3,10
326-000X 1F-2R 2 3/4 70 ,022 ,56 ,122 3,10
320-00X 2F-3R 1 15/16 49 ,026 ,66 ,134 3,40
326-00X 2F-3R 2 3/4 70 ,026 ,66 ,134 3,40
320-0X 3F-4R 1 15/16 49 ,030 ,76 ,151 3,84
326-0X 3F-4R 2 3/4 70 ,030 ,76 ,151 3,84
320-1X 4F 6R 1 15/16 49 ,034 ,86 ,187 4,75
326-1X 4F-5R 2 3/4 70 ,034 ,86 ,187 4,75
320-20X 5F-6R 1 15/16 49 ,036 ,91 ,215 5,46
326-20X 5F-6R 2 3/4 70 ,036 ,91 ,215 5,46
320-2X 5F-6R 1 15/16 49 ,036 ,91 ,250 6,35
326-2X 5F-6R 2 3/4 70 ,036 ,91 ,250 6,35
1/4“ Hex Power Drive
Electric Screwdriver
www.labem.pl
218
Suitable Bits and Drive
Socket Head Drive
Order-No. Point Size Overall Length
Inch mm
AM-1.5MM 1,5 mm 1 15/16 49
AM-2MM 2,0 mm 1 15/16 49
AM-2.5MM 2,5 mm 1 15/16 49
AM-3MM 3,0 mm 1 15/16 49
AM-3MM-3 3,0 mm 3 76
AM-3MM-4 3,0 mm 4 102
AM-4MM 4,0 mm 1 15/16 49
AM-5MM 5,0 mm 1 15/16 49
AM-5MM-4 5,0 mm 4 102
AM-6MM 6,0 mm 1 15/16 49
AM-6MM-4 6,0 mm 4 102
AM-7MM 7,0 mm 1 15/16 49
AM-8MM 8,0 mm 1 15/16 49
AM-10MM 10,0 mm 1 15/16 49
1/4“ Hex Power Drive - Metric
Pozidriv®-Drive
Order-No. Size Overall Length Body Ø Turned Length
Inch mm Inch mm Inch mm
491-PZDX 1 1 15/10 49 3/10 4,6 1 1/4 32
491-A-PZDX 1 2 3/4 70 3/16 48 2 51
492-PZDX 2 1 15/16 49 1/4 6,4 1 1/4 32
492-A-PZDX 2 2 3/4 70 1/4 6,4 2 51
493-PZDX 3 1 15/16 49 5/16 7,9 1 25
493-A-PZDX 3 2 3/4 70 5/16 7,9 1 3/4 44
1/4“ Hex Power Drive
www.labem.pl
219
Torx® Drive
1/4“ Hex Power Drive
Electric Screwdriver
Order-No. Driver Size Body Ø Overall Length
mm Inch mm
49-TX-05 T5 3,0 1 15/16 49
49-A-TX-05 T-5 3,0 2 3/4 70
49-TX-06 T-6 3,0 1 15/16 49
49-A-TX-06 T-6 3,0 2 3/4 70
49-TX-07 T-7 3,0 1 15/16 49
49-A-TX-07 T-7 3,0 2 3/4 70
49-A-TX-08 T-8 3,0 2 3/4 70
49-TX-09 T-9 3,0 1 15/16 49
49-A-TX-09 T-9 3,0 2 3/4 70
49-TX-10 T-10 3,8 1 15/16 49
49-A-TX-10 T-10 3,8 2 3/4 70
49-TX-15 T-15 3,8 1 15/16 49
49-A-TX-15 T-15 3,8 2 3/4 70
49-TX-20 T-20 4,3 1 15/16 49
49-A-TX-20 T-20 4,3 2 3/4 70
49-TX-25 T 25 4,0 1 15/16 49
49-B-TX-25 T-25 4,9 3 1/2 89
49-TX-27 T-27 5,5 1 15/16 49
49-B-TX-27 T 27 5,5 3 1/2 89
49-TX-30 T-30 6,0 1 15/16 49
49-B-TX-30 T-30 6,0 3 1/2 89
49-TX-40 T 40 7,8 1 15/16 49
49-B-TX-40 T-40 7,8 3 1/2 89
www.labem.pl
220
Suitable Bits and Drive
Phillips® Drive
Order-No. Point Size Overall Length Body Ø Turned Length
Inch mm Inch mm Inch mm
4910X 0 1 15/16 49 1/8 3,2 1 1/4 32
4910-AX 0 2 3/4 70 1/8 3,2 2 51
491X 1 1 15/16 49 3/16 4,8 1 1/4 32
491-AX 1 2 3/4 70 3/16 4,8 2 51
492X 2 1 15/16 49 1/4 6,4 1 1/4 32
492-AX 2 2 3/4 70 1/4 6,4 2 51
493X 3 1 15/16 49 5/16 7,9 1 25
493-AX 3 2 3/4 70 5/16 7,9 1 3/4 44
1/4“ Hex Power Drive
www.labem.pl
221
Electric Screwdriver
www.labem.pl
222
Dispensers, Syringes Adapters, Needles
Less is more ...
www.labem.pl
223
Dispensers
the adequate dispenser for every application
2 versions of dispenser, 1 or 2 channel
tremendous economy of consumables
quick overview and selection of accessories
Easy equipment selection
reduced sources of errors due to manual control
dispensing time via potentiometer
protection against pollution
vacuum technology for drop stop
Easy handling
www.labem.pl
224
Dispensers
KDS824A
KDS834A
KDS806V
Order No. Model Description
T0053163699 KDS824A Deluxe Shot Meter
230V/120V
Order No. Model Description
T0053165699 KDS834A Economy Shot Meter
230V/120V
Order No. Model Description
KDS806V KDS806V Foot Valve with Vacuum
Shot time duration adjustable
from 0,01 to 99,99 seconds
Vacuum feature prevents
dripping
Electrically actuated foot
pedal
One channel without time
controlled air
Hot time duration adjustable
from 0,01 to 99,99 seconds
Vacuum feature prevent
dripping
Electrically actuated foot
pedal
Basic ON-OFF function
Foot actuated for excellent
ergonomics
Works on compressed air
input only, no electricity
required
0-100 PSI regulator and
gauge
Vacuum feature prevents
dripping
www.labem.pl
225
KDS301
Vacuum Pick-up wand
Spare Parts Suction Cups KDS301
Order No. Model Description
KDS301 KDS301 Vacuum Pick-up Wand
Order No. Model Description
KDS260S KDS260S Suction Cup Small 3,2 mm for KDS301
KDS260M KDS260M Suction Cup Medium 6,3 mm for KDS301
KDS260L KDS260L Suction Cup Large 9,5 mm for KDS301
Attaches to the air accessory
port of the KDS824A
A finger control on the wand
allows an easily pick up of
small components
Comes with three sizes
of conductive suction
cups KDS260S (3,2 mm),
KDS260M (6,3 mm),
KDS260L (9,5 mm)
Dispensers
www.labem.pl
226
Unique design works with all manufacturer´s syringes
360° swivel on adapter head for ease of motion
Use with single component, two part, self-leveling and non-self-leveling
materials
Metal Adapters Assemblies (universal)
Miscellaneous Accessories
Syringe Adapters
Order No. Size Airline Diameter Pack quantity
Inch mm
KDS805S6 5CC 3/32“ 2,4 1
KDS810S6 10CC 3/32“ 2,4 1
Metal syringe adapter with
6“ (2 m) air line and fitting
Plugs directly into any shot
meters
Fittes all syringes usual in
trade
Syringe Adapters
Order No. Description
KDS816 Syringe Holder Stand
www.labem.pl
227
Stainless Steel Plastic Hub
Dispensing Needles
Needles
Order No. Description Gauge Inside Ø Outside Ø Length Colour Pack quantity
Inch mm Inch mm Inch mm
KDS1412P Threaded Hub Needle 14 0,067 1,70 0,083 2,11 1/2 12,70 dark green 50
KDS141P Threaded Hub Needle 14 0,067 1,70 0,083 2,11 1 25,40 dark green 50
KDS1512P Threaded Hub Needle 15 0,060 1,52 0,072 1,83 1/2 12,70 orange 50
KDS1612P Threaded Hub Needle 16 0,053 1,35 0,064 1,63 1/2 12,70 purple 50
KDS161P Threaded Hub Needle 16 0,053 1,35 0,064 1,63 1 25,40 purple 50
KDS16112P Threaded Hub Needle 16 0,053 1,35 0,064 1,63 1 1/2 38,10 purple 50
KDS1712P Threaded Hub Needle 17 0,045 1,14 0,060 1,52 1/2 12,70 white 50
KDS1812P Threaded Hub Needle 18 0,038 0,97 0,050 1,27 1/2 12,70 pink 50
KDS181P Threaded Hub Needle 18 0,038 0,97 0,050 1,27 1 25,40 pink 50
KDS1912P Threaded Hub Needle 19 0,032 0,81 0,042 1,07 1/2 12,70 brown 50
KDS191P Threaded Hub Needle 19 0,032 0,81 0,042 1,07 1 25,40 brown 50
KDS2012P Threaded Hub Needle 20 0,026 0,66 0,035 0,89 1/2 12,70 yellow 50
KDS201P Threaded Hub Needle 20 0,026 0,66 0,035 0,89 1 25,40 yellow 50
KDS2112P Threaded Hub Needle 21 0,023 0,58 0,032 0,89 1/2 12,70 green 50
KDS2212P Threaded Hub Needle 22 0,019 0,48 0,028 0,71 1/2 12,70 black 50
KDS221P Threaded Hub Needle 22 0,019 0,48 0,028 0,71 1 25,40 black 50
KDS2312P Threaded Hub Needle 23 0,017 0,43 0,025 0,64 1/2 12,70 light blue 50
KDS2512P Threaded Hub Needle 25 0,012 0,30 0,020 0,51 1/2 12,70 blue 50
KDS3012P Threaded Hub Needle 30 0,006 0,15 0,012 0,30 1/2 12,70 lavender 50
KDS660 Pieces Needle Kit 500
KDSSAMPLEPACK Needle Sample Pack 5
Packages 1.000 pcs. on request
Dispensers
www.labem.pl
228
Needles
Tapered Tip Needles
Order No. Description Gauge Inside Ø Colour Pack quantity
Inch mm
KDS14TNP Taper Tip Needle 14 0,063 1,60 salmon 50
KDS16TNP Taper Tip Needle 16 0,048 1,22 grey 50
KDS18TNP Taper Tip Needle 18 0,034 0,86 green 50
KDS20TNP Taper Tip Needle 20 0,024 0,61 pink 50
KDS22TNP Taper Tip Needle 22 0,017 0,43 blue 50
www.labem.pl
229
Miscellaneous Accessories
Order No. Description Pack quantity
KDS825 Panel Mount Coupler 1
KDS900 Male Connector large Barb 5
KDS901 Female Connector for KDS301 1
TAL332CH Air-line for syring adapter 1
APC5132CM Air-line for KDS301 1
Dispensers
www.labem.pl
230
Contents
Erem Tools Precision Made in Switzerland 232 – 233
Tweezers 234 – 257
Erem impresses 236 – 237
Special applications 238 – 239
Tweezers with pointed tips 240 – 247
Tweezers with flat round tips 248
Tweezers with ergonomic handles 249
SMD tweezers 250 – 252
Locking gripping tweezers 253
Wafer tweezers 254 – 255
Cutting tweezers 255
Stripping tweezers 256
Extraction tweezers 257
Cutters 258 – 299
Erem impresses 262 – 263
Choosing the right tool 264 – 269
Special applications 270 – 271
Series 600 Micro cutters 272 – 275
Series 2400 MagicSense cutters 276 – 279
Series 500 Medium cutters 280 – 285
Series 800 Maxi cutters 286 – 289
Tungsten-carbide cutters 290 – 293
Special applications 294 – 295
Pneumatic side cutters and tip cutters 296 – 297
Distance cutters 298 – 299
www.labem.pl
231
Pliers 300 – 313
Erem pliers 302 – 307
Stripping pliers 308 – 309
Forming pliers 310 – 313
Special tools 314 – 323
IC and SMD tools 316 – 317
Fibre optic tools 318 – 319
Vacuum micromanipulator 320 – 323
Kits 324 – 332
www.labem.pl
232
The genuine Swiss
pliers & tweezers
Since
19 63
232
Tweezers
Precision Made in Switzerland
The quality and performance of our Erem precision tools
are the product of more than 40 years of development and
know-how. Made in Switzerland, Erem tools are the result
of constant product development and innovation to meet
customer demands and the requirements of modern manu-
facturing techniques.
Constantly changing market developments encourage Erem
to design and manufacture forward looking tools for appli-
cations in the fields of electronics, aviation / aero-space,
biology, medical accessories, the watch industry and tele-
communications.
Erem tools enjoy the deserved high reputation of Swiss
precision manufacture and our expertise, combined with
ease of use and operator comfort make them an ideal
partner in global manufacturing processes.
www.labem.pl
233233
Tweezers
www.labem.pl
234
Tweezers
Erem manufacture a wide range
of tweezers.
The combination of expert manufacture, symmetry and
balance give Erem tweezers their renowned reputation
for precision and the highest quality.
Pointed tips for precision work
Ergonomically shaped handles prevent hand fatigue
Large selection of matching SMD tweezers and cutting
tweezers for individual applications
www.labem.pl
235
Tweezers
www.labem.pl
236
Erem impresses
The choice of which tweezers to use
will depend as much on the material it is
made from as the function it carries out:
Hardened steel
Tweezers made from hardened steel are
typified by their particularly hard tips,
which ensure great durability. The twee-
zers are magnetic and the material is not
non-rusting.
Stainless steel
Tweezers made from stainless steel have
robust tips and are non-rusting. The mate-
rial is less hard than hardened steel.
Stainless-steel tweezers have the identifi-
cation letter „S“ in their order numbers.
Erem special stainless steel
This alloy is non-magnetic. The tweezers
are non-rusting, acid-proof and heat-
resistant up to 300°C (512°F).
Tweezers made from special stainless steel
tweezers have the identification letter
„SA“ in their order numbers.
Titanium
Titanium tweezers are light weight and
resistant to high temperatures.
Erem manufactures a wide range of
precision tweezers. The range covers
tweezers made from hardened steel,
stainless steel, non-magnetic acid resis-
tant stainless steel, titanium, brass, nickel
silver and nickel-plated tweezers. Tweezer
tips can be serrated or smooth metal, or
made from synthetic ESD safe material to
prevent damage to fragile surfaces.
In addition to SMD and stripping twee-
zers, the range includes special gripping
tweezers, which enable particularly fine
wires or insulated optical fibres to be held
and manipulated.
Erem can make to order tweezers for
specialised applications. The combination
of precision-manufactured, symmetrical
tips and perfect balance make Erem
tweezers outstanding high-precision tools
of the highest quality.
Material
www.labem.pl
237
Only Erem offers tweezers with a special
Pyroplast coating.
Advantages:
Heat-resistant up to 500°C (932°F), al-
most twice as high as Teflon® or Cralon
No capillary effect on tips, e.g. while
soldering (non-stick property)
No contamination caused by positive
or negative charge
Water-resistant
Radiation-resistant
Thickness of coating 60-80 µ
The Pyroplast coating is not available
on all Erem tweezers.
It is made to order and requires a
minimum order quantity.
Please contact your nearest sales office
for more information.
Erem has developed a series of tweezers
with ergonomic handles to reduce the
risk of Repetitive Strain Injuries (RSI) to the
hands.
The identification letter in the order num-
ber is „E“.
Erem also offers two further inno-
vative tweezers with ergonomically
shaped handles:
E15AGW cutting tweezers with
hardened cutting edges for increased
service life
EOODSA precision tweezers with
straight strong tips which are
inside-serrated for secure handling
Advantages:
Ergonomically shaped handles reduce
Carpal Tunnel Syndrome (CTS) and early
hand fatigue
Two-color, thermally insulated soft-grip
handles made from soft foam material
ensure high user comfort
Manufactured from non-magnetic,
acid-proof and stainless steel alloy
ESD-safe
Ergonomic
Coating
Tweezers
Teflon® is a registered Trademark of E.I. Dupont de Nemours and Company
www.labem.pl
238
Special applications
Erem micro-tweezers are suitable for
use in biology (e.g. model 5MBS, 5FSA
or M5S).
These tweezers with very pointed tips
enable confined spaces to be accessed
and offer excellent visibility when perfor-
ming precision work and when working
under a microscope.
High precision tweezers are particularly
suitable for analysis applications and the
handling of tissues, fine threads and other
very small objects.
Tweezers for biology and laboratory applications
The quality and performance of Erem
precision tweezers are the result of
more than 40 years of development and
know-how.
Erem is one of the leaders in the develop-
ment of high-precision tools for a wide
variety of applications in electronics, ae-
ronautical engineering, light engineering,
telecommunications, laboratory techno-
logy, medicine and the jewelry, watchma-
king and goldsmith industries.
www.labem.pl
239
Tweezers
Tweezers for use in the jewelry industry
These stainless steel tweezers with Teflon®
coated tips (e.g. type 2ASASLT) are
particularly suited for use in the jewelry
industry. They are robust and the Teflon®
coated tips are non stick.
Titanium tweezers type like 3CTA are also
ideal for this application. Their lightweight
maintains fingertip control over extended
working periods and their resistance to
high temperatures allows them to be used
where gas flames might be encountered.
Erem offers special gripping pliers for
appli-cations in light engineering. The
lockable gripping tweezers type 940AS
can withstand a tensile force of 5 kg and
can securely hold small wires.
The stainless steel construction allows the
tweezers to be sterilised in an autoclave.
Tweezers for use in light engineering and dental applications
www.labem.pl
240
Tweezers
Precision tweezers: Pointed tips straight
For applications in microelectronics, jewelry-
making, watchmaking, medicine and laboratory
technology
Suitable for delicate standard applications and
precision work on small components or wires
For all models with the suffix SA or SASL in
the order number: Special stainless steel, non-
magnetic, non-rusting, acid-proof, heat-resistant
For all models with the suffix S in the order
number: Stainless steel, robust tips, non-rusting,
non-reflecting surface
108 mm/4.252 Inch
Model Description
ACSA 16 g Precision tweezers with serrated finger grips for secure
0.56 oz. handling. For precise bending and holding of components
or wires.
20AS 12 g Precision tweezers with serrated finger grips and inside-
0.42 oz. serrated tips for secure handling. Guide pin to avoid
overlapping of tips. For precise bending and holding of
components or wires.
80 mm/3.150 Inch
Model Description
M5S 6 g Micro-tweezers, very pointed tips, e.g. for precision
0.21 oz. work under a microscope.
www.labem.pl
241
Precision tweezers: Pointed tips straight
Model Description
3CS 11 g Precision tweezers with long tips for precision work on
0.39 oz. printed-circuit boards.
3CSA 11 g Precision tweezers, standard model for delicate work.
0.39 oz.
3CSASL 11 g Same as 3CSA, but economy model.
0.39 oz.
3CTA 8 g Model same as 3CSA, but made from titanium:
0.28 oz. non-magnetic, very heat-resistant and very light.
53CSA 11 g Precision tweezers with anti-crush feature.
0.39 oz. Prevents damage to sensitive components.
Tweezers relieved at front for secure handling.
110 mm/4.331 Inch
Model Description
3SA 14 g Precision tweezers with pointed tips for work in
0.49 oz. microelectronics.
3SASL 14 g Same as 3SA, but economy model.
0.49 oz.
1SA 14 g Precision tweezers with pointed tips for standard
0.49 oz. applications..
1SASL 14 g Same as 1SA, but economy model.
0.49 oz.
OOSA 20 g Precision tweezers with pointed tips. Very robust.
0.71 oz. Suitable for standard applications, e.g. for assembly
in electronics.
120 mm/4.724 Inch
Tweezers
www.labem.pl
242
Tweezers
Precision tweezers: Pointed tips straight
120 mm/4.724 Inch
Model Description
O OSA S L* 20 g Same as OOSA, but economy model.
0.71 oz.
OOCSA 18 g Model same as 00SA, but with shorter tips.
0.64 oz.
OOBSA 20 g Model same as 00SA, but with serrated finger grips for
0.71 oz. secure handling.
OODSA 20 g Model same as 00SA, but with serrated finger grips and
0.71 oz. inside-serrated tips for secure handling.
64SA 17 g Precision tweezers with pointed tips and serrated finger
0.60 oz. grips for secure handling.
11N 17 g Precision tweezers with medium-pointed tips for use on
0.60 oz. soft components. Nickel-silver, non-magnetic.
AAZ* 16 g Precision tweezers with medium-pointed tips,
0.56 oz. nickel-plated. Suitable for electronic assembly tasks.
125 mm/4.921 Inch
Model Description
AAS 16 g Precision tweezers with fine but robust tips.
0.56 oz.
AASA 16 g Precision tweezers with fine but robust tips
0.56 oz. for standard applications.
AASASL* 16 g Same as AASA, but economy model.
0.56 oz.
*Not available in North America
www.labem.pl
243
Tweezers
Precision tweezers: Pointed tips straight
125 mm/4.921 Inch
Model Description
AM 17 g Precision tweezers made from brass. The soft
0.60 oz. metal protects sensitive components against damage.
No sparks.
130 mm/5.118 Inch
Model Description
249SA 20 g Precision tweezers with pointed synthetic tips (PPS) and
0.71 oz. serrated finger grips for secure handling. Volume resistance
16 Ω/cm. Heat-resistant up to 250°C (480°F). Resistant
to acids and molten soldering tin. Water-repellent.
249CER* 24 g Same as 249SA, but with ceramic tips. Heat-resistant up
0.84 oz. to 900°C (1500°F).
140 mm/5.512 Inch
Model Description
RRS 30 g Precision tweezers with strong tips for
1.05 oz. heavy-duty applications.
SSSA 11 g Precision tweezers with long, narrow grips and low
0.39 oz. tension, responds to minimal pressure. The long grips
allow precision work close to heat sources.
150 mm/5.906 Inch
Model Description
29SA 26 g Reverse-action tweezers with wide, rounded tips. For hol-
0.92 oz. ding parts by reverse clamping action. Insulated handles,
e.g. for protecting against heat.
160 mm/6.299 Inch
Model Description
21SA 23 g Precision tweezers with medium-pointed tips and serrated
0.81 oz. finger grips and inside-serrated tips for secure handling.
Very robust. The long grips allow precision work close to
heat sources.
*Not available in North America
www.labem.pl
244
Tweezers
Precision tweezers: Pointed tips straight relieved
For precision work e.g. under a microscope
Relieved shape facilitates excellent access to
the most confined spaces
For all models with the suffix SA or SASL in
the order number: Special stainless steel, non-
magnetic, non-rusting, acid-proof, heat-resistant
For all models with the suffix S in the order
number: Stainless steel, robust tips, non-rusting,
non-reflecting surface
90 mm/3.543 Inch
Model Description
M4AS* 9 g Micro-tweezers, very pointed tips, e.g. for working
0.32 oz. under a microscope.
110 mm/4.331 Inch
Model Description
4SA 13 g Precision tweezers with very pointed tips.
0.46 oz.
4SASL 13 g Same as 4SA, but economy model.
0.46 oz.
*Not available in North America
www.labem.pl
245
Tweezers
Precision tweezers: Pointed tips straight relieved
115 mm/4.528 Inch
Model Description
5MBS* 12 g Precision tweezers with extremely pointed tips (~ 0.03 x
0.42 oz. 0.07 mm/.002 Inch) for use in dissection procedures and
working under a microscope. For use on soft materials only.
5FSA* 12 g Precision tweezers with extremely pointed tips (~ 0.05 x
0.42 oz. 0.1 mm/.003 Inch) for use in dissection procedures and
working under a microscope. For use on soft materials only.
5SA 12 g Precision tweezers with very pointed tips, suitable
0.42 oz. for very fine wires.
5SASL 12 g Same as 5SA, but economy model.
0.42 oz.
2SA 16 g Precision tweezers with medium-pointed tips.
0.56 oz.
2SASL 16 g Same as 2SA, but economy model.
0.56 oz.
120 mm/4.724 Inch
Model Description
258SA 15 g Precision tweezers with pointed synthetic tips (PPS) and
0.53 oz. serrated finger grips for secure handling. Volume resistance
16 Ω/cm. Heat-resistant up to 250°C (480°F). Resistant to
acids and molten soldering tin. Water-repellent.
*Not available in North America
www.labem.pl
246
Tweezers
Precision tweezers: Pointed tips bent
For applications in biology, medicine, laboratory
technology and microelectronics
Bent shape facilitates access to confined spaces
For all models with the suffix SA or SASL in the
order number: Special stainless steel, non-
magnetic, non-rusting, acid-proof, heat-resistant
For all models with the suffix S in the order
number: Stainless steel, robust tips, non-rusting,
non-reflecting surface
110 mm/4.331 Inch
Model Description
3CBS 15 g Precision tweezers, curved 40°, with pointed
0.53 oz. tips, for precision work such as assembly on
printed-circuit boards.
115 mm/4.528 Inch
Model Description
5CSA 12 g Precision tweezers, curved 30°, relieved. Pointed tips.
0.42 oz. Relieved shape at front of handle provides excellent
visibility of the area to be worked on.
5BSA 12 g Precision tweezers, curved 30°, relieved. Pointed tips.
0.42 oz. Relieved shape at front of handle provides excellent
visibility of the area to be worked on.
51SA 12 g Precision tweezers, curved 30°, relieved. Very pointed tips.
0.42 oz. Relieved shape at front of handle provides excellent
visibility of the area to be worked on.
www.labem.pl
247
Tweezers
Precision tweezers: Pointed tips bent
115 mm/4.528 Inch
Model Description
51SASL 12 g Same as 51SA, but economy model.
0.42 oz.
5ASA 12 g Precision tweezers, lightly curved 15°, relieved.
0.42 oz. Very pointed tips, e.g. for installing small components.
5ASASL 12 g Same as 5ASA, but economy model.
0.42 oz.
120 mm/4.724 Inch
Model Description
7SA 15 g Precision tweezers, curved, relieved, with pointed tips.
0.53 oz. Excellent handling in confined spaces.
7SASL 15 g Same as 7SA, but economy model.
0.53 oz.
140 mm/5.512 Inch
Model Description
65ASA 11 g Precision tweezers, curved 50°. Very pointed tips.
0.39 oz. For working with extra-small chips and other miniature
components.
150 mm/5.906 Inch
Model Description
24SA 22 g Precision tweezers, curved 40°, with robust pointed tips.
0.78 oz. Serrated finger grips and inside-serrated tips for secure
handling. Guide pin to avoid overlapping of tips. Ideally
suitable for soldering and assembly jobs.
30SA 26 g Reverse-action tweezers, curved 30°, with robust pointed
0.92 oz. tips. Fibreglass handles for protection against heat.
Reverse clamping action for comfortably holding parts.
Particularly suitable for soldering and assembly jobs.
www.labem.pl
248
Tweezers
Precision tweezers: Flat round tips straight
Suitable for all standard gripping applications
and assembly jobs on printed-circuit boards, e.g.
in the goldsmith and jewelry industries
For all models with the suffix SA or SASL in the
order number: Special stainless steel, non-
magnetic, non-rusting, acid-proof, heat-resistant
120 mm/4.724 Inch
Model Description
2ASA 15 g Precision tweezers with flat rounded tips for gripping
0.53 oz. small components. Tip width 2 mm/.078 Inch.
2ASASL 15 g Same as 2ASA, but economy model.
0.53 oz.
2ASASLT* 16 g Same as 2ASA, but with Teflon®-coated tips for
0.56 oz. non-stick holding of self-adhesive parts.
2ASARU 16 g Same as 2ASA, but with coated tips for non-stick
0.56 oz. holding of self-adhesive parts.
25SA 15 g Precision tweezers with flat, round tips slightly wider
0.53 oz. than the 2ASARU model. Serrated finger grips for secure
handling. For standard gripping jobs.
52ASA 15 g Precision tweezers with pointed, rounded and flexibly
0.53 oz. movable tips. Prevents damage to sensitive components.
*Not available in North America
www.labem.pl
249
Tweezers
Precision tweezers with ergonomic handles
This series offers models with thin shaped tips
to suit every application
Ergonomically shaped handles reduce hand fatigue
and facilitates comfortable working
Thermally insulated, soft foam handles, ESD-safe
For all models with the suffix SA in the order
number: Special stainless steel, non-magnetic,
non-rusting, acid-proof, heat-resistant
120 mm/4.724 Inch
Model Description
E5SA 25 g Ergonomic precision tweezers with straight, very
0.88 oz. pointed tips for gripping fine wires.
E3CSA 25 g Ergonomic precision tweezers with long, straight and pointed
0.88 oz. tips, e.g. for assembly jobs on printed-circuit boards.
EOOSA 30 g Ergonomic precision tweezers with straight, strong tips for
1.05 oz. standard applications. Very robust.
EOODSA 30 g Model same as EOOSA, but with inside-serrated tips.
1.05 oz.
E7SA 28 g Ergonomic precision tweezers with curved strong tips,
0.99 oz. e.g. for working in confined spaces.
E2ASA 28 g Ergonomic precision tweezers with straight, flat
0.99 oz. and rounded tips for simple gripping jobs. Tip width
2 mm/.078 Inch.
E15AGW 30 g Cutting tweezers, carbon-steel tips.
1.05 oz.
www.labem.pl
250
Tweezers
SMD tweezers
High-quality precision tweezers for SMD jobs
with different designs (chip, MELFs, mini MELFs)
Blunted edges prevent damage to printed-circuit
boards
115 mm/4.528 Inch
Model Description
102ACA 15 g SMD tweezers, angled 45°, with pointed tips for vertical
0.53 oz. application.
102ACAX 14 g Model same as 102ACA, but reverse clamping
0.49 oz. action for easy holding.
103ACA 15 g SMD tweezers, angled 45°, with slightly wider
0.53 oz. tips for vertical application.
SMD tweezers – Angled tips
Suitable for perfect handling of chips and miniature
components
Suitable for assembling SMD printed-circuit boards
or ceramic substrates
Bent shape facilitates optimum access to confined
spaces and provides excellent visibility of the area
to be worked on
For all models with the suffix CA in the order
number: Special stainless steel, non-magnetic,
non-rusting, acid-proof, heat-resistant
www.labem.pl
251
Tweezers
SMD tweezers – Round tips straight
Suitable for gripping and holding round
components and wires
Blunted edges prevent damage to printed-circuit
boards
For all models with the suffix SA in the order
number: Special stainless steel, non-magnetic,
non-rusting, acid-proof, heat-resistant
110 mm/4.331 Inch
Model Description
39SA 15 g SMD tweezers with round tips, dia. 0.3 mm/.011 Inch.
0.53 oz. Serrated finger grips for secure handling. For gripping
small wires and cylindrical components.
40SA 15 g SMD tweezers with round tips, dia. 0.4 mm/.015 Inch.
0.53 oz. Serrated finger grips for secure handling. For gripping
small wires and cylindrical components.
120 mm/4.724 Inch
Model Description
150SAMF
13 g SMD tweezers with round, very narrow tips, dia. 1.2 – 2.5 mm/
0.46 oz. .047 – .098 Inch. Serrated finger grips for secure handling.
For gripping cylindrical components, mini MELFs, etc.
150SAD 13 g SMD tweezers with round tips, dia. 1.5 – 3 mm/
0.46 oz. .059 –.118 Inch.Serrated finger grips for secure handling.
For gripping cylindrical components, mini MELFs, etc.
150SA 13 g SMD tweezers with round tips, dia. 1.5 – 3 mm/
0.46 oz. .059 –.118 Inch. Serrated finger grips for secure handling.
For gripping cylindrical components.
151SA 13 g SMD tweezers with round tips, dia. 3 – 6 mm/
0.46 oz. .118 –.236 Inch. Serrated finger grips for secure handling.
For gripping cylindrical components.
www.labem.pl
252
Tweezers
Suitable for gripping fine wires and cylindrical
components
Blunted edges prevent damage to printed-circuit
boards
For all models with the suffix SA in the order
number: Special stainless steel, non-magnetic,
non-rusting, acid-proof, heat-resistant
115 mm/4.528 Inch
Model Description
32BSA 17 g SMD tweezers, angled 45°, with round tips,
0.60 oz. dia. 5 mm/.197 Inch.
32BSA20* 17 g SMD tweezers, angled 45°, with round tips,
0.60 oz. dia. 2 mm/.078
32BSA25 17 g MD tweezers, angled 45°, with round tips,
0.60 oz. dia. 2.5 mm/.098 Inch.
150SAMB 13 g MD tweezers, angled 40°, with round tips,
0.46 oz. dia. 1.2 – 2.5 mm/ .047 – .098 Inch.
Serrated finger grips for secure handling.
SMD tweezers – Round tips bent
*Not available in North America
www.labem.pl
253
Tweezers
Locking Gripping Tweezers
Gripping tweezers enable the user to hold and
manipulate particularly fine wires with a diameter
from 0.3 mm/.011 Inch or insulated optical fibres
with a diameter of between 1.5 mm/.059 Inch and
5 mm/.197 Inch
Suitable as a ligature clamp in dentistry
Can be disinfected and sterilized
120 mm/4.724 Inch
Model Description
940AS* 17 g Gripping tweezers with locking mechanism.
0.60 oz. The ring-shaped tip provides for secure handling
up to a tensile force of 5 kg.
*Not available in North America
www.labem.pl
254
Tweezers
Wafer tweezers
Suitable for 3“ to 6“ wafers
Serrated finger grips for secure handling
Wafer tweezers are available to order in various
sizes and coatings
For all models with the suffix SA in the order
number: Special stainless steel, non-magnetic,
non-rusting, acid-proof, heat-resistant
A = Paddle width
B = Paddle depth
125 mm/4.921 Inch Dimensions in mm/Inch
Model A B Description
91SA 15 g 12 7 Standard wafer tweezers for 3” and 4” wafers.
0.53 oz. .472 .276
130 mm/5.118 Inch Dimensions in mm/Inch
Model A B Description
600ASA 23 g 19,5 8 Wafer tweezers with flat lower paddle and
0.81 oz. .768 .315 6 upper fingers for protecting wafers against
damage. For 6” wafers.
608ASA 23 g 30 8,5 Model same as 600ASA,
0.81 oz. 1.181 .276 but 30 mm/1.181 Inch wide.
600JSA 24 g 20 8 Wafer tweezers with free-floating Teflon®
0.84 oz. .787 .315 upper paddle for secure, damage-free gripping.
For 4” – 6” wafers.
www.labem.pl
255
Tweezers
Wafer tweezers
150 mm/5.906 Inch Dimensions in mm/Inch
Model A B Description
141SAP 30 g 30 8 Wafer tweezers with polyester tips for
1.05 oz. 1.181 .315 protecting Si, GaAs or Ti wafers against
damage. For 4” – 6” wafers.
Cutting tweezers
Suitable for cutting fine, soft wires and small
components
Delivers high-precision cuts
Hardened cutting edges for long service life
For all models with the suffix S in the order
number: Stainless steel, robust tips, non-rusting,
non-reflecting surface
115 mm/4.528 Inch
Model Description
15AGS 21 g Cutting tweezers with narrow oblique head.
0.74 oz. For soft wires up to dia. 0.25 mm/.010 Inch.
15AGW 26 g SCutting tweezers with narrow oblique head.
0.92 oz. For soft wires up to dia. 0.25 mm/.010 Inch.
www.labem.pl
256
Stripping tweezers
Suitable for stripping fine wires with PVC
or Teflon® insulation
Non-reflecting surface
Please send a wire sample when ordering
Tweezers
120 mm/4.724 Inch
Model Description
29Y30* 22 g
Miniature stripping tweezers, dia. 0.25 mm/.010 Inch (AWG 30).
0.78 oz. Stainless steel. Serrated finger grips for secure handling.
29Y32* 22 g
Miniature stripping tweezers, dia. 0.2 mm/.007 Inch (AWG 32).
0.78 oz. Stainless steel. Serrated finger grips for secure handling.
29Y34* 22 g
Miniature stripping tweezers, dia. 0.16 mm/.006 Inch (AWG 34).
0.78 oz. Stainless steel. Serrated finger grips for secure handling.
29Y36* 22 g
Miniature stripping tweezers, dia. 0.13 mm/.005 Inch (AWG 36).
0.78 oz. Stainless steel. Serrated finger grips for secure handling.
29Y40* 22 g
Miniature stripping tweezers, dia. 0.08 mm/.003 Inch (AWG 40).
0.78 oz. Stainless steel. Serrated finger grips for secure handling.
120 mm/4.724 Inch
Model Description
29W30 28 g Stripping tweezers with synthetic fibre handle. For wires
0.99 oz. of dia. 0.25 – 0.3 mm/.010 – .011 Inch (AWG 30 – 28).
For standard and Teflon® insulation.
XB29W301 Spare blade for 29W30
*Not available in North America
www.labem.pl
257
Suitable for extracting contacts from the rear
of a plug connector
Tweezers
Extraction tweezers
A = Outside diameter of pin
B = Inside diameter of pin
120 mm/4.724 Inch Dimensions in mm/Inch
Model Ø A Ø B Description
024C 15 g 12 7 Extraction tweezers for Sub-D connectors.
0.53 oz. .472 .276 Stainless steel.
www.labem.pl
258
Side Cutters and Tip Cutters
Erem offers a wide range of precision side and
tip cutters for almost every application
Special tool steel is hardened with an unique Swiss technology
This particular hardening process guarantees high durability
www.labem.pl
259259
Side Cutters and Tip Cutters
www.labem.pl
260
Side Cutters and Tip Cutters
Internal patented Erem
Magic Spring
Reduce costs by long life
Constant spring force
Guarantees more than 1 million operations
High precision
screw joint
Smooth jaw action with no play
Smooth cutting operation with no jaw
overlapping
Erem Cut: Options for
semi flush, full flush or
super flush cuts
ESD-safe
The interchangeable foam-cushion handles
are ESD-safe and are fitted as standard on all
Erem cutters and pliers.
EMI/RF Erem cutters and pliers
Sources:DOD/CECC
10∞ 1001051012 1020 Ω/cm2
antistaticconductive insulatingstatic dissipating
www.labem.pl
261
Side Cutters and Tip Cutters
Safety device for holding wire scraps
This safety device for side cutters holds
wire scraps securely after cutting.
Available on most Series 500, 600 and
2400 cutters (oval head). Order suffix
„W“, e.g. 595EW.
Ergonomically shaped handles
for high comfort,
better grip and added safety
EMOS maximum opening stop
limits the cutting-edge tips from opening
more than 5 mm/.197 Inch. The limited extent
to which the handles can open prevent user
hand fatigue.
Induction-hardened cutting edges
in Rockwell hardness 63 – 65 HR
for exceptionally long life
Erem cutting-edge protection
for tip cutters
All tip cutters are fitted with a special stop
system which prevents the cutting edges
from overlapping.
www.labem.pl
262
Erem impresses
Erem Technology Handle
Special tool steel
Erem electronics tools are made from
bright steel. They are not drop forged.
The special tool steel is made using
an unique Swiss processing technique.
The bright tool steel gives additional
strength and toughness to the tools
pro-moting a long service life.
The internal patented Erem
Magic Spring
The Magic Spring system used in Erem
precision tools is unique. It is integral to
the cutting head and provides a constant
closing and re-opening force. It is guaran-
teed for 1 million operations.
The Magic Spring system is highly reliable,
makes the tools easy to use and reduces
operator fatigue.
Erem cutters and pliers with
ergonomic handles
Work Related Upper Limb Disorder
(WRULD) can be caused by positional
fatigue or nerve damage brought about
by the repeated use of non-ergonomic
hand tools, otherwise known as Repetiti-
ve Strain Injuries (RSI).
WRULDS is a direct consequence of
insufficient ergonomics in manufactu-
ring processes and working practices. To
reduce the factors which cause WRULDS,
Erem has developed a range of tools with
ergonomic handles (Series 2400 Magic-
Sense).
The handle shape and special materials
ensure a soft feel, operating comfort
and safety. The specially shaped handles
ensure that the gripping pressure is evenly
spread over the entire palm of the hand.
The thumb and fingers automatically find
their best position. The effort that has to
be exerted by the user is reduced, thereby
reducing hand fatigue.
The anti-slip surface provides excellent
grip. The material is highly resistant to
perspiration, water, oil and chemicals.
The handles are ESD-safe and are easily
interchangeable.
High precision screw joint
This self locking screw joint system gives
a smooth cutting and opening action
and ensures that there is no blade overlap
or play.
Precision cutting and reduced shock
to components.
EMOS maximum opening stop
The unique EMOS (Erem Maximum Ope-
ning Stop) system prevents the tips from
opening more than 5 mm/.197 Inch. It re-
duces user fatigue by preventing excessive
hand spread.
Comfortable and fatigue free working.
www.labem.pl
263
Erem Cut Erem Service
Cut shape
There are three blade options, which
determine the shape left on a lead after
cutting. (see also P. 35)
1. Semi-flush
2. Flush
3. Super full flush
Cutting edge
Erem cutters are noted for their ease of
use, one of the reasons for this is the
ability of the blade to cut equally well over
its full length. This promotes operator
comfort and reduces fatigue.
Semi-flush cutters offer the best perfor-
mance and the longest service life. Super
full flush cutters leave a flat wire end with
minimal effort and prevent components
from being subjected to load.
High level of user comfort thanks to
special cutting edge.
Re-sharpening
Erem is your service partner. All Erem side
and tip cutters except those with carbide
insert blades can be re-sharpened up-to
three times.Carriage charges will apply.
The re-sharpened tool is as good as new,
its life is extended and costs are reduced.
Replacement parts
Erem cutters and pliers and their com-
ponent parts are warranted against manu-
facturing defects. Magic springs, precision
joint components are available as spare
parts.
The warranty and availability of spares
guarantee long service life.
ESD-safe
The ergonomic, interchangeable molded
handles are ESD-safe and are fitted as
standard on all Erem cutters and pliers.
Rockwell hardness
The cutting blades of Erem cutters are
hardened to Rockwell 63-65 HRc by an
induction heating process. Continuous
process control ensures that the blades
achieve the correct level of hardening and
are not embrittled.
This level of hardening plus the high-gra-
de tool steel used in the manufacture of
the tools and continuous process control
promote an exceptionally long service life.
Standard cut
„Super full flush“
Erem cut Super
full flush: perfect
flush cut
Side Cutters and Tip Cutters
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
www.labem.pl
264
Choosing the right tool
Selection criteria
Size
Erem offers a wide selection of precisi-
on side and tip cutters for virtually any
application.
Erem offers the right head size to suit eve-
ry application. There are three main sizes:
Micro, Medium and Maxi.
Each head size is available in different
head shapes.
When choosing the right cutter,
it is important to take
S i z e
C u t
Head shape
Cutting capacity
into consideration.
Head width
Head thickness
Micro Medium Maxi
Series 600 Series 2400 MagicSense Series 500 Series 800
Size
Head width 9.0 mm/.354 Inch Head width 11.0 mm/.433 Inch Head width 11.0 mm/.433 Inch Head width 13.5 mm/.531 Inch
Head thickness 6.0 mm/.236 Inch Head thickness 6.0 mm/.236 Inch Head thickness 6.5 mm/.256 Inch Head thickness 7.5 mm/.295 Inch
Miniature cutter for appli-
cations in microelectronics
and for fine wires. Offers a
large variety of head shapes
for very good access even
to hard-to-reach areas.
The strongest and most
robust head size for general
cutting applications in
electronics, cuts large wire
diameters.
Medium-size cutter. Combines robustness, visibility and
accessibility. Large variety of head shapes for precision
working in hard-to-reach areas. The Series 2400 MagicSense
offers an optimised ergonomic shape and an improved grade
of hardness.
Classification of cutter heads
www.labem.pl
265
Cut
There are three blade options, which
determine the shape left on a lead after
cutting.
Standard cut
„Super full flush“
Erem cut Super
full flush: perfect
flush cutSemi-flush
This cut leaves a pyramidal tip at the end of the
wire. It is particularly suitable for standard jobs
where the final shape does not play a significant
role. Cutters with this cut are suitable for both
soft copper wires and very hard wires such as
stainless steel.
Flush
This cut leaves a much smaller tip at the end
of the wire than the semi-flush cut – without
reducing the cutting capacity. The cutting edges
are finer than on semi-flush cutters. The effort
exerted when cutting is less and the load on the
component is reduced. Flush wire ends reduce
the effort needed to fit components on printed-
circuit boards. Erem guarantees precise cutting
even after frequent use.
Super full flush
Only Erem offers you a super full flush cut.
This cut provides absolutely flush wire ends.
No rework is needed. Cutters with this cut
are absolutely precision-ground and sharpened.
The effort exerted when cutting is low, as is
the load on the component caused by the cut.
Soldering tags in soldering-bath procedures
are prevented. Cutters of this type are used in
microelectronics, space travel or medical tech-
nology. These cutters are suitable for soft wires.
Side Cutters and Tip Cutters
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
www.labem.pl
266
Choosing the right tool
Head shape
Erem offers the right head shape to suit
your application. The head shapes differ in
terms of shape and design. There are six
basic shapes:
Shape Tip cutter Tip cutter Tip cutter
Straight relieved head Pointed relieved head Angled narrow head
This head is suitable for
horizontal and vertical
cuts. The long tips facilitate
cutting in hard-to-reach
areas.
Visibility and accessibility
Cutting at the outermost tip of
the cutter
This is the narrowest head
shape. The underside is
relieved and facilitates
optimum access even to
extremely hard-to-reach
areas.
The angled head provides
for precise cuts at different
working angles.
Series 600 Micro 670E*, 670EP*, 670EPF* 622NB, 632NCF, 676E, 776E
(P. 265) (P. 264)
Series 2400 MagicSense 2470E 2475E, 2482E
(P. 269) (P. 269)
Series 500 Medium 570E, 573E** 592E, 792E 555E, 572E, 582E (P. 53)
(P. 275) (P. 274) 575E, 593AE (P. 273)
Series 800 Maxi 884E
(P. 278)
Erem cutting-edge protection for tip cutters
Erem tip cutters are equipped with cutting-edge
protection.A special stop system prevents the cutting
edges from overlapping.
* Very short head
** Straight head for vertical working
www.labem.pl
267
Tip cutter Side cutter Side cutter
Angled wide head Tapered head Oval head
High cutting capacity
Cutting over the full length
of the cutter
The angled head provides
for precise cuts at different
working angles.
The jaws of the cutter have
straight edges and taper
to a point. This head shape
allows access to difficult
to reach areas but reduces
the cutting capacity in
comparison to the same
size oval head cutter.
This is the most widely used
head shape, it is robust
and size for size offers the
highest cutting capacity.
622NA 612N, 622N, 632N
(P. 264) (P. 263)
2403E, 2404E 2477E 2412E, 2422E, 2432E
(P. 48) (P. 268) (P. 267)
503E, 504E 577E, 595E 512E, 512N, 522N,
(P. 52) (P. 272) 532N, 599E (P. 271)
886E 812N, 822N, 896E
(P. 278) (P. 277)
Erem offers carbide cutters (see P. 39) for cutting high-hardness
wire (piano wire).
Side Cutters and Tip Cutters
www.labem.pl
612N
622N
632N
622NA
622NB
676E
776E
632NCF
670E
670EP
670EPF
2412E
2422E
2432E
2477E
2403E
2404E
2482E
2475E
2470E
mm 0,03 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1,0 1,1 1,2 1,3 1,4 1,5 1,6 1,7 1,8 1,9 2,0
Inch .0001 .003 .007 .011 .015 .019 .023 .027 .031 .035 .039 .043 .047 .051 .055 .059 .062 .066 .070 .074 .078
mm 0,03 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1,0 1,1 1,2 1,3 1,4 1,5 1,6 1,7 1,8 1,9 2,0
Inch .0001 .003 .007 .011 .015 .019 .023 .027 .031 .035 .039 .043 .047 .051 .055 .059 .062 .066 .070 .074 .078
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
30°
30°
45°
45°
268
Choosing the right tool
Wire quality
Piano wire, stainless spring steel wire, material 1.4310, tensile strength 2000–2400 MPa
Hard wire, stainless steel wire, material 1.4301, tensile strength 1800 MPa
Medium-hard wire, stainless steel wire, material 1.4301, tensile strength 800 MPa
Soft wire, copper, aluminium, tensile strength 250 MPa
Series 2400 MagicSense
Only for soft materials: silicone, rubber, etc.
Only for micro pitches under 0.5 mm / .019 Inch
For micro-package contacts
Semi-flush
Flush
Super full flush
Flush
Flush
Flush
Super full flush
Super full flush
Flush
Flush
Flush
Semi-flush
Flush
Super full flush
Flush
Flush
Flush
Flush
Flush
Flush
Model Cut Cutting capability
www.labem.pl
512N
512E
522N
599E
532N
595E
577E
503E
504AE
555E
572E
582E
582EW
593AE
575E
592E
792E
570E
573E
812N
896E
822N
886E
884E
622TX
599T
599TF
595T
595TF
2476TX1
576TX1
2476 TX
576TX
503ET
503ETF
mm 0,03 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1,0 1,1 1,2 1,3 1,4 1,5 1,6 1,7 1,8 1,9 2,0
Inch .0001 .003 .007 .011 .015 .019 .023 .027 .031 .035 .039 .043 .047 .051 .055 .059 .062 .066 .070 .074 .078
mm 0,03 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1,0 1,1 1,2 1,3 1,4 1,5 1,6 1,7 1,8 1,9 2,0
Inch .0001 .003 .007 .011 .015 .019 .023 .027 .031 .035 .039 .043 .047 .051 .055 .059 .062 .066 .070 .074 .078
mm 0,03 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1,0 1,1 1,2 1,3 1,4 1,5 1,6 1,7 1,8 1,9 2,0
Inch .0001 .003 .007 .011 .015 .019 .023 .027 .031 .035 .039 .043 .047 .051 .055 .059 .062 .066 .070 .074 .078
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
35°
40°
45°
30°
45°
30°
30°
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
269
Side Cutters and Tip Cutters
Series 800 Maxi
Tungsten-carbide cutters
Semi-flush
Semi-flush
Flush
Flush
Super full flush
Flush
Flush
Flush
Flush
Flush
Flush
Flush
Flush
Flush
Flush
Flush
Super full flush
Flush
Flush
Semi-flush
Semi-flush
Flush
Flush
Flush
Flush
Semi-flush
Flush
Semi-flush
Flush
Flush
Flush
Flush
Flush
Semi-flush
Semi-flush
Series 500 Medium
For vertical cutting
Model Cut Cutting capability
www.labem.pl
270
The 632NCF miniature side cutter is ideally
suitable for soft material such as silicone
tubes in medical device applications,
precision connector seals or miniature
rubber seals.
The miniature cutter is also the ideal tool
for cutting soft synthetic parts, e.g. in the
manufacture of hearing aids.
The cutting edges of the 632NCF side
cutter are precision-ground to an extre-
mely high level. This enables the cutter to
deliver a razor-like full-flush cut.
A simple method to remove SMD ICs is to
cut each of the individual leads to remove
the device and then reflow the joint with
a soldering iron and remove the compo-
nent lead from the board.
The solder left on the board can then be
removed with a desoldering tool or desol-
der braid and a new component fitted.
The 670EP and 670EPF have fine pointed
tapered and relieved heads that are able
to fit between individual leads and cut
them without causing damage to the
printed circuit.
Special applications
Side cutters for use in medical device manufacturing
Tip cutters to remove fine pitch SMD ICs
www.labem.pl
271
A stent is a vascular-wall prop. It is a
lattice-shaped tube made of stainless steel
or nickel-titanium. It serves to hold open
constricted coronary blood vessels and
improves the flow of blood through the
vessels.
It is important in stent manufacture that
the cut end of any wire in the lattice is as
flat as possible, otherwise it will be neces-
sary rework the stents.
These side cutters have fine polished car-
bide cutting blades to accurately cut the
lattice and reduce the need for rework.
VectranTM is a Trademark of Kurary Co., Ltd.
Kevlar® is a registered Trademark of E.I. Dupont de Nemours and Company
The 599TFO has wear resistant tungs-
ten carbide cutting edges and all round
capability. It is able to cut VectranTM brai-
ded wires, fibre optics, Kevlar® and small
stainless steel braids and wires.
A further application lies in telecommuni-
cations, i.e. working on fibre-optic cables,
Kevlar® silks and piano wires.
Tungsten-carbide cutter for the preparation of cardio-vascular stents
High precision side cutter for cutting stainless wires
Side Cutters and Tip Cutters
www.labem.pl
272272
Side Cutters and Tip Cutters
Series 600 Micro
Miniature cutters
Offers a wide variety of head shapes
for access in difficult to reach areas
Suitable for SMD and leads
(670EP, 670EPF)
Made from high grade tool steel with
cutting edges hardened to 63-65HRc
Non reflecting surface, ESD safe,
resharpenable
www.labem.pl
273
Series 600 Micro
A = length of cutting edges
B = head width
C = head thickness
D = head length
D
Tip cutter Tip cutter Side cutter Side cutter
Straight short Pointed Tapered head Oval head
relieved head relieved head
Robustness, high cutting capacityVisibility and accessibility
Side cutter – oval head
110 mm/4.331 Inch
48 g/1.69 oz.
This is the most widely used head shape.
Fits for all cutting applications where easy access
is given
It is robust and size for size offers the highest
cutting capacity.
Model Cut Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter
A B C D Hard wire Medium hardness Copper wire
612N 9 9 6 15 0.5 0.8 1.3
Semi-flush .354 .354 .236 .590 .019 .031 .051
622N 9 9 6 15 – 0.8 1.3
.354 .354 .236 .590 .031 .051
Flush
632N 9 9 6 15 – 0.7 1.3
.354 .354 .236 .590 .027 .051
Super full flush
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Wire quality, see P. 38
Side Cutters and Tip Cutters
www.labem.pl
274
Side Cutters and Tip Cutters
Series 600 Micro
Side cutter – tapered head
Tip cutter – pointed relieved head
110 mm/4.331 Inch
48 g/1.69 oz
110 mm/4.331 Inch
48 g/1.69 oz.
The jaws of the cutter have straight edges and taper
to a point.
This head shape allows access to difficult to reach
areas but reduces the cutting capacity in comparison
to the same size oval head cutter.
This is the narrowest head shape.
The underside is relieved and facilitates optimum
access even to extremely hard-to-reach areas.
Model Cut Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter
A B C D Medium hardness Copper wire
622NA 9 9 6 15 0.7 1.0
.354 .354 .236 .590 .027 .039
Flush
Flush F
Super Full Flush FF
Semi Flush SF
Model Cut Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter
A B C D Medium hardness Copper wire
622NB 9 9 6 15 0.6 0.8
Flush .354 .354 .236 .590 .023 .031
676E 9 9 6 15 Model same as 622NB,
.354 .354 .236 .590 but with short, robust head
Flush
776E 9 9 6 15 0.6 0.8
.354 .354 .236 .590 .023 .031
Super full flush
632NCF 9 9 6 15 For soft material such as small silicone tubes,
.354 .354 .236 .590 miniature rubber seals or for cutting soft
Super full flush synthetic parts
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
www.labem.pl
275
Series 600 Micro
Tip cutter – straight short relieved head
110 mm/4.331 Inch
48 g/1.69 oz.
Suitable for cutting SMD and
micro-package contacts.
Model Cut Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter
A B C D Medium hardness Copper wire
670E 9 9 6 18 0.5 0.8
Flush .354 .354 .236 .709 .019 .031
670EP 9 9 6 18 0.4 0.6
.354 .354 .236 .709 .015 .023
Flush High-precision working on SMD and micro-package
contacts up to 0.25 mm/.010 Inch
670EPF* 9 9 6 18 Model same as 670EP, but smaller version only for
.354 .354 .236 .709 micro pitches under 0.5 mm/.019 Inch (see also P. 40)
Flush
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Side Cutters and Tip Cutters
*Not available in North America
www.labem.pl
276
Side Cutters and Tip Cutters
Series 2400 MagicSense
Medium-size cutter
Combines robustness, visibility and
accessibility.
Large variety of head shapes for precisi-
on working in hard-to-reach areas.
The optimised ergonomic shape of the
Series 2400 MagicSense prevents hand
fatigue
Improved induction-hardened
cutting edges up to 64 – 65 HRc
for an extremely long service life
Cutting edges made from special
tool steel
Non-reflecting surface, ESD-safe
nd resharpenable
www.labem.pl
277
Series 2400 MagicSense
A = length of cutting edges
B = head width
C = head thickness
D = head length
D
Tip cutter Tip cutter Tip cutter Side cutter Side cutter
Straight long Angled Angled Tapered head Oval head
relieved head narrow head wide head
Robustness, high cutting capacityVisibility and accessibility
Side cutter – oval head
130 mm/5.118 Inch
70 g/2.47 oz.
This is the most widely used head shape.
Fits for all cutting applications where easy access
is given
It is robust and size for size offers the highest
cutting capacity.
Model Cut Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter
A B C D Hard wire Medium hardness Copper wire
2412E 12 11 6 19 0.5 1.0 1.6
Semi-flush .472 .433 .236 .748 .019 .039 .062
2422E 12 11 6 19 – 1.0 1.6
.472 .433 .236 .748 .039 .062
Flush
2432E 12 11 6 19 – 0.8 1.6
472 .433 .236 .748 .039 .062
Super full flush.
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Wire quality, see P. 38
Optional: Safety device for wire scraps. Order suffix „W“, e.g. 2412W.
Side Cutters and Tip Cutters
Flush F
Super Full Flush FF
Semi Flush SF
www.labem.pl
278
Side Cutters and Tip Cutters
Series 2400 MagicSense
Side cutter – tapered head
127 mm/5.999 Inch
70 g/2.47 oz.
The jaws of the cutter have straight edges and taper
to a point.
This head shape allows access to difficult to reach
areas but reduces the cutting capacity in comparison
to the same size oval head cutter.
Model Cut Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter
A B C D Medium hardness Copper wire
2477E 12 11 6 19 1.0 1.3
Flush .472 .472 .433 .236 .039 .051
Flush F
Super Full Flush FF
Semi Flush SF
Tip cutter – angled wide head
127 mm/5.118 Inch
70 g/2.47 oz.
30°
The angled head provides for precise cuts at different
working angles.
Model Cut Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter
A B C D Medium hardness Copper wire
2403E 9 11 6 19 1.0 1.6
Flush .354 .433 .236 .748 .039 .062
Wide, robust head, fine cut
2404E 9 11 6 20 0.8 1.3
Flush .354 .433 .236 .787 .031 .051
Model same as 2403E, but with
pointed rounded head
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
www.labem.pl
279
Series 2400 MagicSense
Tip cutter – angled narrow head
135 mm/5.315 Inch
72 g/2.54 oz.
45°
The angled head provides for precise cuts at
different working angles.
Model Cut Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter
A B C D Medium hardness Copper wire
2482E 6 11 6 26 0.6 1.2
Flush .236 .433 .236 1.024 .023 .047
Suitable for working on printed-circuit boards, component
connections, can be used in both 90° and 180° applications
2475E 4 11 6 22 0.4 0.6
.157 .433 .236 .866 .015 .023
Flush
Suitable for fine cutting work on hybrid circuits
of miniature components
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Tip cutter – straight long relieved head
140 mm/5.512 Inch
72 g/2.54 oz.
This head is suitable for horizontal and vertical cuts.
The long tips facilitate cutting in hard-to-reach areas.
Model Cut Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter
A B C D Medium hardness Copper wire
2470E 4 11 6 29 0.4 0.6
Flush .157 .433 .236 1.142 .015 .023
Flush F
Super Full Flush FF
Semi Flush SF
Safety device for wire scraps only possible on 2412EW,
2422EW, 2432EW, 2477EW, 2482EW models.
Side Cutters and Tip Cutters
www.labem.pl
280
Side Cutters and Tip Cutters
Series 500 Medium
Medium size, robust, precision cutters
Wide range of head shapes
Manufactured from high grade
tool steel
Cutting edges hardened to
Rockwell 63-65 HRc
Non reflecting surface, ESD safe
and resharpenable
www.labem.pl
281
Series 500 Medium
A = length of cutting edges
B = head width
C = head thickness
D = head length
Tip cutter Tip cutter Tip cutter Tip cutter Side cutter Side cutter
Straight long Pointed Angled Angled Tapered head Oval head
relieved head
relieved head narrow head wide head
Robustness, high cutting capacityVisibility and accessibility
Wire quality, see P. 38 Optional: Safety device for wire scraps. Order suffix „W“, e.g. 512NW.
D
Side cutter – oval head
115 mm/4.527 Inch
67 g/2.36 oz.
This is the most widely used head shape.
Fits for all cutting applications where easy access
is given
It is robust and size for size offers the highest
cutting capacity.
Model Cut Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter
A B C D Hard wire Medium hardness Copper wire
512N 12 11 6.5 19 0.5 1.0 1.6
Semi-flush .472 .433 .256 .748 .019 .039 .062
512E 12 11 6.5 19 Model same as 512N, but with burnished head
.472 .433 .256 .748
Semi-flush
522N 12 11 6.5 19 – 1.0 1.6
.472 .433 .256 .748 .039 .062
Flush
599E 10 11 6.5 17 – 1.0 1.6
.472 .433 .256 .669 .039 .062
Flush Short, robust head
532N 12 11 6.5 19 – 0.8 1.6
.472 .433 .256 .748 .039 .062
Super full flush
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Side Cutters and Tip Cutters
www.labem.pl
282
Side Cutters and Tip Cutters
Series 500 Medium
Side cutter – tapered head
115 mm/4.527 Inch
67 g/2.36 oz.
The jaws of the cutter have straight edges and taper
to a point.
This head shape allows access to difficult to reach
areas but reduces the cutting capacity in comparison
to the same size oval head cutter.
Model Cut Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter
A B C D Medium hardness Copper wire
595E 12 11 6.5 19 1.0 1.3
Flush .472 .433 .256 .748 .039 .051
Tapered head
577E 10 11 6.5 17 1.0 1.3
.472 .433 .256 .669 .039 .051
Flush Tapered, short head
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Tip cutter – angled wide head
110 mm/4.331 Inch
67 g/2.36 oz.
30°
The angled head provides for precise cuts at
different working angles.
Model Cut Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter
A B C D Medium hardness Copper wire
503E 9 11 6.5 19 1.0 1.6
Flush .354 .433 .256 .748 .039 .062
Wide, robust head
504AE 9 11 6.5 19 0.8 1.3
.354 .433 .256 .748 .031 .051
Flush Model same as 503E, but with pointed rounded head
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
www.labem.pl
283
Series 500 Medium
Tip cutter – angled narrow head
120 mm/4.724 Inch
68 g/2.40 oz.
35°
The angled head provides for precise cuts at different
working angles.
Narrow, robust head, suitable for working with high
cutting force in confined areas.
Model Cut Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter
A B C D Medium hardness Copper wire
555E 6 11 6.5 24 0.6 1.3
Flush .236 .433 .256 .945 .023 .051
Flush F
Super Full Flush FF
Semi Flush SF
115 mm/4.527 Inch
68 g/2.40 oz.
40°
Relieved cutting edge for easy access.
Model Cut Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter
A B C D Medium hardness Copper wire
572E 6 11 6.5 21 0.6 1.3
Flush .236 .433 .256 .827 .023 .051
Flush F
Super Full Flush FF
Semi Flush SF
115 mm/4.527 Inch
68 g/2.40 oz.
40°
Suitable for working on printed-circuit boards,
component connections, can be used in both
90° and 180° applications.
Model Cut Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter
A B C D Medium hardness Copper wire
582E 6 11 6.5 26 0.6 1.3
Flush .236 .433 .256 1.024 .023 .051
Flush F
Super Full Flush FF
Semi Flush SF
115 mm/4.527 Inch
67 g/2.36 oz.
45°
Model same as 582E, but with safety device
for wire scraps.
Model Cut Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter
A B C D Medium hardness Copper wire
582EW 6 11 6.5 26 0.6 1.3
Flush .236 .433 .256 1.024 .023 .051
Flush F
Super Full Flush FF
Semi Flush SF
Side Cutters and Tip Cutters
www.labem.pl
284
Side Cutters and Tip Cutters
Series 500 Medium
Tip cutter – angled narrow head
115 mm/4.527 Inch
68 g/2.40 oz.
30°
110 mm/4.331 Inch
67 g/2.36 oz.
45°
Ideal rework tool, suitable for cutting DIL contacts
at front and rear and densely printed circuit boards.
Suitable for fine cutting work on hybrid circuits
or miniature components.
Model Cut Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter
A B C D Medium hardness Copper wire
593AE 4 11 6.5 26 0.4 1.0
Flush .157 .433 .256 1.024 .015 .039
Model Cut Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter
A B C D Medium hardness Copper wire
575E 4 11 6.5 22 0.2 0.6
Flush .157 .433 .256 .866 .007 .023
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Tip cutter – pointed relieved head
115 mm/4.527 Inch
67 g/2.36 oz.
This is the narrowest head shape.
The underside is relieved and facilitates optimum
access even to extremely hard-to-reach areas.
Model Cut Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter
A B C D Medium hardness Copper wire
592E 12 11 6.5 19 0.4 0.8
Flush .472 .433 .256 .748 .015 .031
792E 12 11 6.5 19 0.4 0.6
.472 .433 .256 .748 .015 .023
Super full flush
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
www.labem.pl
285
Series 500 Medium
Tip cutter – straight long relieved head
120 mm/4.724 Inch
67 g/2.36 oz.
This head is suitable for horizontal and vertical cuts.
The long tips facilitate cutting in hard-to-reach areas.
Model Cut Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter
A B C D Medium hardness Copper wire
570E 4 11 6.5 29 0.6 1.2
Flush .157 .433 .256 1.142 .023 .047
For cutting at extreme tips
Flush F
Super Full Flush FF
Semi Flush SF
Tip cutter – straight head for vertical use
120 mm/4.724 Inch
67 g/2.36 oz.
Model Cut Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter
A B C D Medium hardness Copper wire
573E 4 11 6.5 29 0.4 0.6
Flush .157 .433 .256 1.142 .015 .023
Flush F
Super Full Flush FF
Semi Flush SF
Side Cutters and Tip Cutters
www.labem.pl
286286
Side Cutters and Tip Cutters
Series 800 Maxi Maxi-sized cutter for general cut-
ting applications in electronics
Made from high grade tool steel,
cutting edges hardened to Rockwell
63-65 HRc
Cuts large wire diameters
Non-reflecting surface, ESD-safe and
resharpenable
www.labem.pl
287
Series 800 Maxi
A = length of cutting edges
B = head width
C = head thickness
D = head length
D
Tip cutter Side cutter Side cutter
Pointed Tapered head Oval head
relieved head
Robustness, high cutting capacityVisibility and accessibility
Wire quality, see P. 38
Side cutter – oval head
120 mm/4.724 Inch
67 g /2.36 oz.
This is the most widely used head shape.
Fits for all cutting applications where easy access
is given
It is robust and size for size offers the highest
cutting capacity.
Model Cut Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter
A B C D Hard wire Medium hardness Copper wire
812N 15 13.5 7.5 21 0.6 1.2 1.8
Semi-flush .590 .531 .295 .827 .023 .047 .070
896E 15 13,5 7,5 21 ø 0,6 ø 1,2 ø 1,8
.590 .531 .295 .827 .023 .047 .070
Semi-flush Suitable for cutting hard wires, Kovar, connector pins
822N 15 13.5 7.5 21 – 1.2 1.8
.590 .531 .295 .827 .047 .070
Flush
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Side Cutters and Tip Cutters
www.labem.pl
288288
Series 800 Maxi
Side cutter – tapered head
120 mm/4.724 Inch
83 g/2.93 oz.
The jaws of the cutter have straight edges and taper
to a point.
This head shape allows access to difficult to reach
areas but reduces the cutting capacity in comparison
to the same size oval head cutter.
Model Cut Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter
A B C D Medium hardness Copper wire
886E 15 13.5 7.5 21 1.0 1.8
Flush .590 .531 .295 .827 .039 .070
Model Cut Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter
A B C D Medium hardness Copper wire
884E 15 13.5 7.5 21 0.8 1.6
Flush .590 .531 .295 .827 .031 .062
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Tip cutter – pointed relieved head
120 mm/4.724 Inch
81 g/2.86 oz.
This is the narrowest head shape.
The underside is relieved and facilitates optimum
access even to extremely hard-to-reach areas.
Side Cutters and Tip Cutters
www.labem.pl
289289
Series 800 Maxi
Side Cutters and Tip Cutters
www.labem.pl
290
Side Cutters and Tip Cutters
Tungsten-carbide cutters
Medium sized precision cutters
Wear resistant tungsten carbide
edged cutting blades
Manufactured from high grade
tool steel
Suitable for cutting hard and
tough wires e.g. piano wire, nickel
and diode leads
Non reflecting surface, ESD safe and
resharpenable
www.labem.pl
291
Tungsten-carbide cutters
A = length of cutting edges
B = head width
C = head thickness
D = head length
Tip cutter Tip cutter Side cutter Side cutter
Pointed Angled Tapered head Oval head
relieved head wide head
Robustness, high cutting capacityVisibility and accessibility
Side cutter – oval head
115 mm/4.527 Inch
67 g/2.36 oz.
This is the most widely used head shape.
Fits for all cutting applications where easy
access is given
It is robust and size for size offers the highest
cutting capacity.
Model Cut
Dimensions in mm/Inch
Max. cutting capability in mm/Inch Diameter
A B C D Piano wire Hard wire Medium hardness Copper wire
622TX 8 9 6 15 0.2 0.4 0.6 1.2
Flush .315 .354 .236 .590 .007 .015 .023 .047
Miniature cutter
599T 12 11 6.5 19 0.6 0.8 1.0 1.5
.472 .433 .256 .748 .023 .031 .039 .059
Semi-flush
599TF 12 11 6.5 19 0.6 0.8 1.0 1.5
.472 .433 .256 .748 .023 .031 .039 .059
Flush
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Wire quality, see P. 38
D
Side Cutters and Tip Cutters
www.labem.pl
292
Side Cutters and Tip Cutters
Tungsten-carbide cutters
Side cutter – tapered head
115 mm/4.527 Inch
67 g/2.36 oz.
The jaws of the cutter have straight edges and taper
to a point.
This head shape allows access to difficult to reach
areas but reduces the cutting capacity in comparison
to the same size oval head cutter.
Model Cut
Dimensions in mm/Inch
Max. cutting capability in mm/Inch Diameter
A B C D Piano wire Hard wire Medium hardness Copper wire
595T 12 11 6.5 19 0.4 0.6 0.8 1.5
Semi-flush .472 .433 .256 .748 .015 .023 .031 .059
595TF 12 11 6.5 19 0.4 0.6 0.8 1.5
.472 .433 .256 .748 .015 .023 .031 .059
Flush
2476TX1 11 11 6 19 0.3 0.4 0.5 1.0
.433 .433 .236 .748 .011 .015 .019 .039
Flush Series 2400 MagicSense model (Length: 130 mm / 5.118 Inch)
576TX1 11 11 6.5 19 0.3 0.4 0.5 1.0
.433 .433 .256 .748 .011 .015 .019 .039
Flush
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
www.labem.pl
293
Tungsten-carbide cutters
Tip cutter – pointed relieved head
115 mm/4.527 Inch
67 g/2.36 oz.
This is the narrowest head shape.
The underside is relieved and facilitates optimum
access even to extremely hard-to-reach areas.
Model Cut
Dimensions in mm/Inch
Max. cutting capability in mm/Inch Diameter
A B C D Piano wire Hard wire Medium hardness Copper wire
2476TX 11 11 6 19 0.1 0.2 0.3 1.0
.433 .433 .236 .748 .003 .007 .011 .039
Flush Series 2400 MagicSense model
576TX 11 11 6.5 19 0.1 0.2 0.3 1.0
.433 .433 .256 .748 .003 .007 .011 .039
Flush
Model Cut
Dimensions in mm/Inch
Max. cutting capability in mm/Inch Diameter
A B C D Piano wire Hard wire Medium hardness Copper wire
503ET 9 11 6.5 19 0.4 0.6 0.8 1.2
.354 .433 .256 .748 .015 .023 .031 .047
Semi-flush
503ETF 9 11 6.5 20 0.4 0.6 0.8 1.2
.354 .433 .256 .787 .015 .023 .031 .047
Flush
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Tip cutter – angled wide head
110 mm/4.331 Inch
67 g/2.36 oz.
30°
The angled head provides for precise cuts at
different working angles.
Flush F
Super Full Flush FF
Semi Flush SF
Side Cutters and Tip Cutters
www.labem.pl
294
Side Cutters and Tip Cutters
Special applications
A = length of cutting edges
B = head width
C = head thickness
D = head length
D
115 mm/4.527 Inch
79 g/2.79 oz.
Side cutter, suitable for cutting printed-circuit boards.
Model Cut Max. cutting capability in mm/Inch
Max. D Max. B
1884EPCM 1.5 2.0
Flush .059 .078
Flush F
Super Full Flush FF
Semi Flush SF
Special applications – Special tool steel, ESD-safe
120 mm/4.724 Inch
100 g/3.53 oz.
Side cutter with compound action.
Model Cut Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter
A B C Copper wire
147A 12 10.5 7.5 1.8 For cutting hard wires
Semi-flush .472 .413 .295 .070 with minimal effort
147AT 12 10.5 7.5 1.8 Model same as 147A, but with
.472 .413 .295 .070 cutting edges made from tungsten
Semi-flush carbide, model on request
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
*Not available in North America
www.labem.pl
295
Special applications
110 mm/4.331 Inch
48 g/1.69 oz.
115 mm/4.527 Inch
67 g/2.36 oz.
115 mm/4.527 Inch
67 g/2.36 oz.
Side cutter, suitable for precision cuts on soft
materials, e.g. small silicone tubes in medical
applications, precision connector seals, miniature
rubber seals, soft synthetic parts.
Side cutter, suitable for cutting Kevlar® silks.
Side cutter with cutting edges made from
tungsten carbide.
Model Cut Dimensions in mm/Inch
A B C
632NCF 9 9 6
Super full flush .354 .354 .236
Model Dimensions in mm/Inch
A B C D
599FO 12 11 6.5 19
.472 .433 .256 .748
Model Cut Dimensions in mm/Inch
A B C D
599TFO 12 10.5 6.5 19 Model same as 599FO, but with cutting edges
Semi-flush .472 .413 .256 .748 made from tungsten carbide. Suitable for cutting
Kevlar
® silks, VectranTM-sheathed wires, optical
fibres and small stainless wires
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Side Cutters and Tip Cutters
www.labem.pl
296
Pneumatic cutter
Handy, light and precise
Extremely versatile thanks to a selection
of different cutting heads
Easily interchangeable cutting heads
Suitable for cutting conventional components,
soft metals or small plastic parts
Side Cutters and Tip Cutters
Pneumatic side cutters and tip cutters
130 mm/5.118 Inch
130 g/4.59 oz.
Pneumatic-cutter housing
Model Dimensions in mm/Inch Diameter
D
1500 BSF 28 Requires 4 – 6 bar oil-free clean compressed air
Pneumatic side cutters and tip cutters
Cutting heads for 1500BSF
A = length of cutting edges
B = head width
C = head thickness
A
B
C
A
B
C
Model Cut Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter
A B C Copper wire
1512N 10 10.5 6.5 1.6
Semi-flush .394 .413 .256 .062
1522N 10 10.5 6.5 1.6
.394 .413 .256 .062
Flush
Flush F
Super Full Flush FF
Semi Flush SF
Side cutter – oval head
35 g/1.16 oz. This is the standard head shape.
It is used for all cutting jobs in easy-to-reach areas.
The oval head provides for a high cutting capacity
and is characterised by its robustness.
Flush F
Super Full Flush FF
Semi Flush SF
Wire quality, see P. 38
www.labem.pl
297
Pneumatic side cutters and tip cutters
Side cutter – pointed relieved head
32 g/1.12 oz.
This is the narrowest head shape.
The underside is relieved and facilitates optimum
access even to extremely hard-to-reach areas.
Model Cut Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter
A B C Copper wire
1522NB 9 10.5 6.5 1.2
Flush .354 .413 .256 .047
Model Cut Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter
A B C Copper wire
1503E 12 10.5 6.5 1.2
Flush .472 .413 .256 .047
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Tip cutter – angled head
38 g/1.34 oz.
30°
The angled head provides for precise cuts at
different working angles.
Side cutter – tapered head
35 g/1.16 oz. The edges of the cutter head are straight and taper
to a point, allowing access to hard to reach areas.
Model Cut Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter
A B C Copper wire
1522NA 9 10.5 6.5 1.4
Flush .354 .413 .256 .055
Flush F
Super Full Flush FF
Semi Flush SF
Side Cutters and Tip Cutters
www.labem.pl
298
Erem distance cutters are available with fixed
and variable cutting lengths
The tips are polished so as to prevent
board damage
For cutting wires to the right length and for
fixing components
The protective stop screw D improves the
performance of Erem distance cutters:
– Clearance B larger than the wire diameter
= cut wire is ejected.
– Clearance B smaller than the wire diameter
= cut wire is held.
Adjust protective stop screw D so that cutting
edge C does not hit the opposite side.
This increases the lifetime of the cutting edge.
Side Cutters and Tip Cutters
Distance cutters
A = jaw length
E = width of tips
F = cutting length
Model Cut
Dimensions in mm/Inch
Max. cutting capability in mm/Inch Diameter
A E F Copper wire
530E06** 20 3 0.6 1.2 Cuts copper wire to a length of 0.6 mm/.023 Inch
Flush .787 .118 .023 .047
530E08 20 3 0.8 1.2 Cuts copper wire to a length of 0.8 mm/.031 Inch
Flush .787 .118 .031 .047
530E10 20 3 1.0 1.2 Cuts copper wire to a length of 1.0 mm/.039 Inch
Flush .787 .118 .039 .047
530E12* 20 3 1.2 1.2 Cuts copper wire to a length of 1.2 mm/.047 Inch
Flush .787 .118 .047 .047
530E13* 20 3 1.3 1.2 Cuts copper wire to a length of 1.3 mm/.051 Inch
Flush .787 .118 .051 .047
530E15 20 3 1.5 1.2 Cuts copper wire to a length of 1.5 mm/.059 Inch
Flush .787 .118 .059 .047
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Fixed cutting length (F)
120 mm/4.724 Inch
67 g/2.36 oz.
Special tool steel
E S D - s a f e
Fixed cutting length (= F)
Reduces mechanical shock on components
Wire quality, see P. 38
D
B
C
*Not available in North America **Order as 539E060 in North America
www.labem.pl
299
Distance cutters
Model Cut
Dimensions in mm/Inch
Max. cutting capability in mm/Inch Diameter
A E F Copper wire
549E 20 3 1.5 1.2 Cuts wire to a length of 1.5 mm/.059 Inch
Flush .787 .118 .059 .047
549E10* 20 3 1.0 1.2 Cuts wire to a length of 1.0 mm/.039 Inch
Flush .787 .118 .039 .047
549E12* 20 3 1.2 1.2 Cuts wire to a length of 1.2 mm/.047 Inch
Flush .787 .118 .047 .047
Model Cut
Dimensions in mm/Inch
Max. cutting capability in mm/Inch Diameter
A E V Copper wire
530E15A* 20 4.5 1.2 – 6 1.2 Variable cutting length from
Flush .787 .177 .047 – .236 .047 1.2 mm to 6 mm/ 047 to .236 Inch
Model Cut
Dimensions in mm/Inch
Max. cutting capability in mm/Inch Diameter
A E V Copper wire
573EB 20 4.5 0 – 5 0.8 Variable cutting length from
Flush .787 .177 0 – .197 .031 0 mm to 5 mm/ 0 to .197 Inch
Model Cut
Dimensions in mm/Inch
Max. cutting capability in mm/Inch Diameter
A E F Copper wire
530E18* 20 3 1.8 1.2 Cuts copper wire to a length of 1.8 mm/.070 Inc
Flush .787 .118 .070 .047
530E20* 20 3 2.0 1.2 Cuts copper wire to a length of 2.0 mm/.078 Inch
Flush .787 .118 .078 .047
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
120 mm/4.724 Inch
67 g/2.36 oz.
45°
120 mm/4.724 Inch
70 g/2.47 oz.
Special tool steel
E S D - s a f e
Fixed length distance cutter
Tapered 45°
Special tool steel
E S D - s a f e
Variable cutting length (= V)
With protective stop screw
Special tool steel
E S D - s a f e
Variable cutting length (= V)
With protective stop screw
Interchangeable plastic stop protects the
printed-circuit board against damage
Variable cutting length (V)
Side Cutters and Tip Cutters
*Not available in North America
115 mm/4.527 Inch
70 g/2.47 oz.
www.labem.pl
300
Pliers
Good grip due to precise produced tips even at
the thinnest part
The choice of materials used for production of the pliers and a
special hardening process is very important.
www.labem.pl
301
Pliers
www.labem.pl
302
Pliers
Internal patented Erem
Magic Spring
lange Lebensdauer
Constant spring force
Guarantees more than 1 million operations
High precision
screw joint
Smooth jaw action with no play
Smooth cutting operation with no
jaw overlapping
Precision ground jaws
Erem pliers, stripping pliers, forming pliers
Gripping and bending pliers with
standard and ergonomic handles
MagicSense – moulded handle for
increase comfort
Wide variety of head shapes
Special tool steel, non-reflecting
surface, ESD-safe
www.labem.pl
303
Pliers
Ergonomically shaped handles
for high comfort,
better grip and added safety
EMOS maximum
opening stop
limits the cutting-edge tips from opening
more than 5 mm/.197 Inch. The limited
extent to which the handles can open pre-
vent user hand fatigue.
ESD-safe
The interchangeable foam-cushion handles
are ESD-safe and are fitted as standard on all
Erem cutters and pliers.
EMI/RF Erem cutters and pliers
Sources: DOD/CECC
10∞ 1001051012 1020 W/cm2
antistaticconductive insulatingstatic dissipating
www.labem.pl
304
Pliers
Erem Pliers
Pliers for miniature and standard electronics
Special tool steel, non-reflecting surface, ESD-safe
High grade tool steel
A = jaw length
B = head width
C = head thickness
E = width of tips
G = total height of both tips
Model Shape Dimensions in mm/Inch
A B C E ø G
543E* 23 9 6.5 0.8 1.6
.905 .354 .256 .031 .062
Model Shape Dimensions in mm/Inch
A B C E G
547 23 9 6.5 0.9 1.2
.905 .354 .256 .035 .047
120 mm/4.724 Inch
62 g/2.18 oz.
120 mm/4.724 Inch
62 g/2.18 oz.
Round nose pliers with very precise, smooth jaws.
Suitable for forming, bending, laying and feeding
in wires.
Needle nose pliers with very precise, smooth and
rounded jaws.
Suitable for forming, bending, laying and feeding
in wires.
Round nose pliers
Needle nose pliers
*Order as 543 in North America
www.labem.pl
305
Pliers
Erem pliers
Model Shape Dimensions in mm/Inch
A B C E G
542E* 23 9 6.5 2.4 1.4
.905 .354 .256 .094 .055
Model Shape Dimensions in mm/Inch
A B C E G
544E* 23 9 6.5 1 1.4
.905 .354 .256 .039 .055
Model Shape Dimensions in mm/Inch
A B C E G
544D 23 9 6.5 1 1.4 Inside-serrated jaws for secure handling
.905 .354 .256 .039 .055
Model Shape Dimensions in mm/Inch
A B C E G
531E* 23 9 6.5 5 3
.905 .354 .256 .197 .118
120 mm/4.724 Inch
67 g/2.36 oz.
120 mm/4.724 Inch
67 g/2.36 oz.
120 mm/4.724 Inch
67 g/2.36 oz.
125 mm/4.921 Inch
67 g/2.36 oz.
Flat nose pliers with smooth jaws and
precision-machined edges.
Suitable for gripping flat workpieces.
Chain nose pliers with narrow half-round jaws.
For securely handling components.
Flat nose pliers with replaceable nylon jaws.
Nylon jaws prevent nicking and scratching.
Suitable for forming precious metals and
component connections.
Flat nose pliers
Chain nose pliers
*Order as 542 in North America
*Order as 531 in North America
*Order as 544 in North America
www.labem.pl
306
Pliers
Series 2400 MagicSense pliers
Pliers for miniature and standard electronics
Optimized ergonomically shaped handles for incre-
ased comfort
Special tool steel, non-reflecting surface, ESD-safe
A = jaw length
B = head width
C = head thickness
E = width of tips
G = total height of both tips
Model Shape Dimensions in mm/Inch
A B C E G
2411P 33.5 11 6 1 1.2
1.319 .433 .236 .039 .047
2411PD 35.5 11 6 1 1.2 Model same as 2411P, but with inside-
1.319 .433 .236 .039 .047 serrated jaws for secure handling
146 mm/5.748 Inch
72 g/2.54 oz.
Needle nose pliers with very precise, smooth
and rounded jaws.
Needle nose pliers
www.labem.pl
307
Pliers
Series 2400 MagicSense pliers
Model Shape Dimensions in mm/Inch
A B C E ø G
2443P 33.5 11 6 0.8 1.6
1.319 .433 .236 .031 .062
146 mm/5.748 Inch
72 g/2.54 oz.
Round nose pliers with very precise, smooth jaws.
Suitable for bending wires.
Round nose pliers
Model Shape Dimensions in mm/Inch
A B C E G
2442P 33.5 11 6 3.4 1.2
1.319 .433 .236 .139 .047
146 mm/5.748 Inch
72 g/2.54 oz.
Flat nose pliers with smooth jaws and
precision-machined edges.
Suitable for gripping flat workpieces.
Flat nose pliers
www.labem.pl
308
Stripping pliers
High precision stripping pliers
Robust, high-precision tools for use in
electronics and aeronautical engineering
The required diameter is set by means
of screws
Screwdriver and key are included
Interchangeable blades
E S D - s a f e
Special designs also available on request
Model Dimensions in mm/Inch
A E G H Wire diameter
510AE 21 5 4 7 0.25 mm – 1.02 mm (AWG 30 – 18)
.827 .197 .157 .276 .010 Inch – .040 Inch
120 mm/4.724 Inch
75 g/2.65 oz.
Suitable for all types of insulation and optical fibres.
Integral side cutting blade.
Front stripping
A = jaw length
E = width of tips
G = total height of both tips
H = length of cutting blade
www.labem.pl
309
Stripping pliers
High precision stripping pliers
Model Dimensions in mm/Inch
A E F G H Wire diameter
552E 23 6.5 1 11 9 0.06 mm – 0.6 mm (AWG 42 – 24)
.905 .256 .039 .433 .354 .002 Inch – .023 Inch
Model Dimensions in mm/Inch
A E F G H Wire diameter
552S 21 6.5 6.7 11 9 0.06 mm – 0.6 mm (AWG 42 – 24)
.827 .256 .264 .433 .354 .002 Inch – .023 Inch
120 mm /4.724 Inch
80 g/2.82 oz
120 mm /4.724 Inch
80 g/2.82 oz
Unique precision for damage-free stripping of
fine wires.
Suitable for all types of insulation, Teflon®, Tefzel
and optical fibres.
Unique precision for damage-free stripping of
fine wires.
Suitable for all types of insulation, Teflon®, Tefzel
and optical fibres.
Front stripping
Side stripping
A = jaw length
E = width of tips
F = depth of interchangeable blade
G = total height of both tips
H = length of cutting blade
A = jaw length
E = width of tips
F = depth of interchangeable blade
G = total height of both tips
H = length of cutting blade
www.labem.pl
310
Forming pliers
Forming pliers for passive components
Safe bending, forming and preparation
of component connections
High grade tool steel
Non-reflecting surface
E S D - s a f e
120 mm/4.724 Inch
70 g/2.47 oz.
120 mm/4.724 Inch
70 g/2.47 oz.
Suitable for component connections, U-shape.
Suitable for component connections, U-shape,
axial forming.
Narrow head shape.
A = jaw length
D = height of tips
E = width of tips
F = length of forming tool
A = jaw length
D = height of tips
E = width of tips
F = length of forming tool
Model Dimensions in mm/Inch Max. connection diameter
A D E F Diodes Capacitors Resistors
554E* 13 10 10 10 0.65 mm 0.7 mm 1/2 W
.512 .394 .394 .394 .025 Inch .027 Inch
Model Dimensions in mm/Inch Max. connection diameter
A D E F Diodes Capacitors Resistors
554A 23 5.6 2.5 4.5 0.65 mm 0.7 mm
1/2 W
.905 .220 .098 .177 .025 Inch .027 Inch
*Order as 554 in North America
www.labem.pl
311
Forming pliers
Forming pliers for passive components
120 mm/4.724 Inch
70 g/2.47 oz.
120 mm/4.724 Inch
67 g/2.36 oz.
120 mm/4.724 Inch
67 g/2.36 oz.
Suitable for secure assembly.
Forms the two opposing Us in one operation.
For cutting and bending components into
two operations to a predefined length.
For cutting and bending different types
of components with two outputs.
A = jaw length
D = height of tips
E = width of tips
F = length of forming tool
A = jaw length
D = height of tips
E = width of tips
F = length of forming tool
A = jaw length
D = height of tips
E = width of tips
F = length of forming tool
Model Dimensions in mm/Inch Max. connection diameter
A D E F Diodes Capacitors Resistors
554TX 20 6.5 6.5 4 0.65 mm 0.7 mm 1/2 W
.787 .256 .256 .157 .025 Inch .027 Inch
Model Dimensions in mm/Inch Max. connection diameter
A D E F Diodes Capacitors Resistors
50788 23 4 3 0.65 mm 0.7 mm 1/2 W
.905 .157 .118 .025 Inch .027 Inch
Model Dimensions in mm/Inch Max. connection diameter
A D E F Diodes Capacitors Resistors
50789Z 23 3.3 3.5 0.65 mm 0.7 mm 1/2 W
.905 .130 .138 .025 Inch .027 Inch
www.labem.pl
312
Forming pliers
High precision forming tools for active components
Safe bending, forming and preparation of
component connections, specially for integra-
ted components and power transistors
High grade tool steel
Non-reflecting surface
E S D - s a f e
120 mm/4.724 Inch
85 g/3.00 oz.
120 mm/4.724 Inch
85 g/3.00 oz.
Suitable for bending flat components, contacts, pow-
er transistors, Triac connections to a right angle.
Suitable for cutting and bending Series TO compo-
nents, diodes and mechanical parts to a right angle.
Easily adjustable with interchangeable cutting edges.
Model Dimensions in mm/Inch
K max. M
500103A* 15 3 – 12
.590 .118 – .472
Model Dimensions in mm/Inch
K max. M
500210E 11 3.8 – 15
.433 .149 – .590
*Not available in North America
www.labem.pl
313
Forming pliers
High precision forming tools for active components
High precision forming pliers for Flat Packs, Quads
High precision forming pliers for DIL pins
120 mm/4.724 Inch
85 g/3.00 oz.
120 mm /4.724 Inch
100 g/3.53 oz.
120 mm/4.724 Inch
98 g/3.46 oz.
3 connections, suitable for bending components
of Series TO 126, 218, 220 and power transistors
through 90° in two rows.
Adjusted by means of a screw.
Suitable for bending flat components, contacts, pow-
er transistors, Triac connections to a right angle.
Suitable for cutting and bending DIL pins through
90° in one operation.
Up to max. 20 DIL pins.
Model Dimensions in mm/Inch
K max. M I
500104A 13 3.5 – 15 2.54
.512 .138 – .590 .100
Model Dimensions in mm/Inch
A K max. M
80013C 17 13 2.8
.669 .512 .110
Model Dimensions in mm/Inch
E F
809IC 25 0.9
.984 .035
or
www.labem.pl
314
Special tools
IC and SMD tools, Fibre optic tools,
Vacuum micromanipulator
IC and SMD tools with precise fine adjustment for inserting, ext-
racting, straightening and cutting IC and SMD components
High-precision tools for optical fibres for professional stripping,
suitable for cutting Kevlar® silks, VectranTM-sheathed wires, etc.
Vacuum system for precise handling of tiny SMD components and
silicon wafers, suitable for assembly and laboratory work
www.labem.pl
315
Special tools
www.labem.pl
316
IC and SMD tools
IC and SMD tools
IC and SMD tools for inserting,
extracting, straightening and cutting
IC and SMD components
Non-reflecting surface
ESD-safer
Model Dimensions in mm/Inch
E 505C 505BGC 505BG
505C 20 Pins:
.787
505BGC 36
1.417
505BG 36
1.417 Width:
Model Dimensions in mm/Inch
A E G
808G 23 42 1
.905 1.653 .039
120 mm/4.724 Inch
130 mm/5.118 Inch
120 g/4.24 oz.
One screwdriver included for fine adjustments.
Practical straightening tool, suitable for
straightening contacts, DIL/IC connections.
Up to 16 connections possible.
Inserting and extracting
Straightening
www.labem.pl
317
IC and SMD tools
Model Cut Dimensions in mm/Inch
A D E
670EP 10 3 2
Flush .394 .118 .079
Model Description
3900KC Kit for SMD work
contents:
51SA Precision tweezers with very pointed tips, bent 30°, relieved; length 115 mm/4.527 Inch
102ACA SMD tweezers with angled tips and blunted edges, suitable for vertical working with small components;
length 115 mm/4.527 Inch
103ACA SMD tweezers with angled tips and blunted edges for vertical working with small components;
length 115 mm/4.527 Inch
150SAMB SMD tweezers with bent tips 40°, serrated finger grips for gripping small cylindrical parts,
dia. 1.2 – 2.5 mm/.047 – .108 Inch; length 120 mm/4.724 Inch
150SAMF SMD tweezers with straight tips and serrated finger grips for gripping small cylindrical parts,
dia. 1.2 – 2.5 mm/.047 – .108 Inch; length 120 mm/4.724 Inch
670EP High-precision tip cutter for connections of SMD micro-packages up to 0.25 mm/.010 Inch
Model Cut Dimensions in mm/Inch
A D
593AE 20 4
Flush .787 .157
110 mm/4.331 Inch
48 g/1.69 oz.
115 mm/4.527 Inch
67 g/2.36 oz.
High-precision tip cutter.
For connections of SMD micro-packages up to 0.25 mm/
.010 Inch, also for pitches smaller than 1/20”.
For µ pitches below 0.5 mm/.019 Inch, you will need
the 670EPF model.
Please send component when ordering.
For SMD assembly and repair applications.
6-piece tool kit with monitored discharging
ESD handles.
Special tool steel, non-reflecting surface,
resharpenable (cutter).
High-quality precision tweezers, non-magnetic.
In an ESD-safe plastic case.
High-precision tip cutter, bent.
Practical rework tool.
For cutting DIL contacts directly on the component.
Ideal for densely printed boards.
Cutting
Kit for SMD work
Flush F
Super Full Flush FF
Semi Flush SF
Flush F
Super Full Flush FF
Semi Flush SF
Special tools
www.labem.pl
318
Fibre optic tools
High precision tools for optical fibres
Suitable for simple and precise
stripping of optical fibres
High grade tool steel
Non-reflecting surface
E S D - s a f e
Model Dimensions in mm/Inch
A E F G H Wire diameter
552S 21 6.5 6.7 11 9 0.06 mm – 0.60 mm (AWG 42 – 24)
.827 .256 .264 .433 .354 .002 Inch – .023 Inch
120 mm /4.724 Inch
80 g/2.82 oz.
120 mm/4.724 Inch
20 g/0.71 oz.
Suitable for all types of insulation, Teflon®, Tefzel
and optical fibres.
Unlimited stripping length thanks to side stripping.
Diameter is set by means of two screws.
Replaceable cutting blade.
Stainless-steel tweezers with synthetic tips (PPS).
Non-reflecting surface.
Non-magnetic.
Side stripping
Holding / gripping
A = jaw length
E = width of tips
F = depth of interchangeable blades
G = total height of both tips
H = length of cutting blade
Model Description
249SA Precision tweezers with pointed synthetic tips (PPS) to protect optical fibres and serrated finger grips for
secure handling. Volume resistance 16 Ω/cm. Heat-resistant up to 250°C (480°F). Resistant to acids and
molten soldering tin. Water-repellent.
www.labem.pl
319
High precision tools for optical fibres
Model Dimensions in mm/Inch
A B C
599FO 15 10.5 6.5
.590 .413 .256
Model Cut Dimensions in mm/Inch
A B C
599TFO 15 10.5 6.5
Semi-flush .590 .413 .256
115 mm/4.527 Inch
67 g/2.36 oz.
115 mm/4.527 Inch
67 g/2.36 oz.
Side cutter, suitable for cutting Kevlar® silks,
V e c t r a n TM-sheathed wires, optical fibres and
small stainless wires.
Side cutter, suitable for cutting Kevlar® silks,
VectranTM-sheathed wires, optical fibres and
small stainless wires.
Cutting
A = length of cutting edges
B = head width
C = head thickness
A
B
C
A
B
C
Flush F
Super Full Flush FF
Semi Flush SF
Special tools
www.labem.pl
320
Vacuum micromanipulator
Vacuum micromanipulator
Professional vacuum system for precise
handling of tiny SMD components and
silicon wafers
Suitable for assembly and laboratory
work
Advantages of the vacuum micromanipulator:
Easy picking up of components or silicone wafers
Immediate set-down/release of parts
Full 360° rotating system
Direct axial switch for vacuum
Ergonomic shape reduces hand and wrist fatigue
E S D - s a f e
3000 ESD
3740
(optional)
3200 2040Z / 2044Z / 2041Z
2052E
3303 / 3305Z /
3310Z / 3315 /
3330
3231
3232 2040Z / 2044Z / 2041Z
2052E
Model Dimensions in mm/Inch
3000ESD* Dia. 10 mm Handle
.394 Inch
140 mm/5.512 Inch
35 g/1.23 oz.
Ergonomic handle with axial switch, serrated finger
grip for secure handling.
Handle
*Not available in North America
www.labem.pl
321
Inserts for 3000ESD housing
Adapters
Model Description
3200* 25 mm 15 g Stainless-steel adapter, rotatable through 360°,
.984 Inch 0.53 oz. straight suction tip for direct working or as an
adapter for suction tips or suction cups
3231* 5 mm 5 g Adapter fix, for working with Series 3300
.197 Inch 0.17 oz. suction tips
3232* 15 mm total 3 g Adapter fix, for direct working or as an adapter for
.590 Inch 0.10 oz. suction tips 20442/20412 or suction cup 2052E
Suction tips, straight
Model Outside diameter Inside diameter
2044Z* 1.3 mm 0.9 mm
.051 Inch .035 Inch
2041Z* 2.0 mm 1.4 mm
.078 Inch .015 Inch
Polyethylene suction tip.
For working with 3200 or 3232 adapter.
Special tools
*Not available in North America
www.labem.pl
322
Vacuum micromanipulator
Inserts for 3000ESD housing
Suction needles
Suction cups
Model Outside diameter Inside diameter
3303* 0.30 mm 0.16 mm
.011 Inch .006 Inch
3305Z* 0.50 mm 0.25 mm
.020 Inch .019 Inch
3310Z* 1.0 mm 0.65 mm
.039 Inch .025 Inch
Model Diameter
2052E* 4.5 mm
.177 Inch
Stainless-steel suction needle.
Bent 45°.
For working with 3200 or 3232 adapter.
Silicone suction cup.
For working with 3200 or 3232 adapter.
*Not available in North America
www.labem.pl
323
Inserts for 3000ESD housing
Vacuum kit
Accessories
Model Description
3714Z* Diaphragm pump 230 V, 5 l/min, max. vacuum –250 mbar
3008ESD* Tube, flexible, 1.8 m/70.866 Inch, ESD-safe
3717* Filter for tube 3008ESD
3740* Table holder for 3000ESD (without accessories)
Model Description
3000KCESD* Vacuum kit
contents:
3000ESD Handle
3200 Adapter, rotatable through 360°
3231 Adapter fix
3305Z, 3310Z, 3315 Suction needles
2052E Suction cup, dia. 4.5 mm / .177 Inch
KDS 260L Suction cup, dia. 9.5 mm / .374 Inch
3740 Table holder
3714Z Diaphragm pump 230 V
3008ESD Tube, flexible
3717 Filter
102ACA SMD tweezers, 115 mm / 4.527 Inch, with bent tips and blunted
edges. For vertical working with small components. Stainless steel,
non-reflecting surface, non-magnetic.
Complete accessories for easy pick-up
and immediate set-down of components
or silicon wafers.
Set for laboratory work.
In an ESD-safe plastic case.
Special tools
*Not available in North America
www.labem.pl
324
Kits
Swiss high precision tools in a kit
Large selection of tool kits with high-quality
precision tools
Optimum combination of suitable precision tools
for many applications, e.g. in microelectronics,
medicine or biology
Precision tools in an ESD-safe plastic case with
padded foam inlay
www.labem.pl
325
Kits
www.labem.pl
326
For use in electronics assembly, the watchmaking
industry, medicine or dentistry.
11-piece tool kit with monitored discharging
ESD handles.
Special tool steel, non-reflecting surface,
resharpenable (cutter).
High-quality precision tweezers, non-magnetic, for
assembly work in electronics and light engineering.
Precision screwdriver with hardened, durable tips,
for precision working in confined areas.
In an ESD-safe plastic case.
Erem Toolset Universal
Model Description
3600KU* Erem Toolset Universal
contents:
XP600 Precision-screwdriver set for electronics 4 regular screwdrivers: 1.5 x 60 mm/.059 x 2.362 Inch, 2.0 x
60 mm/.078 x 2.362 Inch, 2.5 x 60 mm/.098 x 2.362 Inch, 3.0 x
60 mm/.118 x 2.362 Inch, 2 Phillips screwdrivers No. 0 and No. 00
2412E Series 2400 MagicSense side cutter, Robust head for universal use, hard wire 0.5 mm/.019 Inch,
semi-flush, oval head medium hardness 1.0 mm/.039 Inch, Cu 1.6 mm/.066 Inch
2442P Series 2400 MagicSense flat nose pliers With smooth jaws, precision-machined edges,
e.g. for gripping flat workpieces
622NB Tip cutter, flush, relieved, Miniature cutter for excellent access, flush,
long, fine head medium hardness 0.6 mm/.023 Inch, Cu 0.8 mm/.031 Inch
AASA Precision tweezers Pointed tips straight, special stainless steel, non-magnetic
2ASASL Precision tweezers With flat rounded tips, tip widths 2 mm/.078 Inch,
special stainless steel, non-magnetic
Kits
Swiss high precision tools in a kit
*Not available in North America
www.labem.pl
327
For SMD assembly and repair applications.
6-piece tool kit with monitored discharging
ESD handles.
Special tool steel, non-reflecting surface,
resharpenable (cutter).
High-quality precision tweezers, non-magnetic,
for SMD work.
In an ESD-safe plastic case.
Erem Toolset SMD
Model Description
3900KC Erem Toolset SMD
contents:
51SA Precision tweezers With very pointed tips, angled 30°, relieved
102ACA SMD precision tweezers Tip width 0.5 mm/.019 Inch, angled 45°
103ACA SMD precision tweezers Tip width 1 mm/.039 Inch, angled 45°
150SAMB SMD precision tweezers With round tips, dia. 1.2 mm – 2.5 mm/.047 Inch – .098
Inch, angled 40°, serrated finger grips for gripping cylindrical
components
150SAMF SMD precision tweezers With round, very narrow tips, dia. 1.2 mm – 2.5 mm/
.047 Inch – .098 Inch, serrated finger grips
670EP Miniature tip cutter, flush, For SMD and micro-package contacts up to
relieved head 0.25 mm/.010 Inch
Swiss high precision tools in a kit
*Not available in North America
Kits
www.labem.pl
328
Kits
For use in electronics, PCB assembly, wire and
connection handling.
3-piece tool kit.
MagicSense moulded handle with soft touch
for increased comfort and grip.
Induction-hardened cutting edges in Rockwell
hardness 64-65 HRc, high grade of hardness for
exceptionally long life.
High grade tool steel, non-reflecting surface,
ESD-safe, resharpenable.
In an ESD-safe plastic case.
Erem 2400 MagicSense
Model Description
2400KMS* Erem 2400 MagicSense
contents:
2412E Series 2400 MagicSense side cutter, Robust head for universal use, hard wire 0.5 mm/.019 Inch,
semi-flush, oval head medium hardness 1.0 mm/.039 Inch, Cu 1.6 mm/.062 Inch
2482E Series 2400 MagicSense tip cutter, Angled 45°, ideally suitable for working on printed-circuit
flush, narrow head boards, component connections, can be used in both 90°
and 180° applications
2411P Series 2400 MagicSense needle nose pliers Smooth, rounded jaws
Swiss high precision tools in a kit
*Not available in North America
www.labem.pl
329
High-quality precision tweezers for use in
microelectronics, light engineering,
laboratory work, biology and medicine.
3-piece tweezer kit.
Special stainless steel, non-magnetic, non-
rusting, acid-proof.
In an ESD-safe plastic case.
Erem Tweezers Prime Selection
Model Description
3300TPS* Erem Tweezers Prime Selection
contents:
3SA Precision tweezers With pointed tips straight
2ASA Precision tweezers With flat rounded tips for gripping smaller components,
tip width 2 mm/.078 Inch
7SA Precision tweezers Curved, relieved, with pointed tips
Swiss high precision tweezers in a kit
*Not available in North America
Kits
www.labem.pl
330
High-quality precision tweezers for SMD work
with assorted shapes of chip, SOT, MELFs, mini
MELFs, flatpacks.
4-piece tweezer kit.
Blunted edges prevent PCB damage.
Special stainless steel, non-magnetic, non-rusting,
acid-proof.
In an ESD-safe plastic case.
Erem SMD Tweezers – Universal
Model Description
3400TSMDU* Erem SMD Tweezers – Universal
contents:
103ACA SMD precision tweezers Angled 45°, tip width 0.5 mm/.019 Inch
150SAMF SMD precision tweezers With round tips, angled 40°, serrated finger grips for secure
handling, for gripping cylindrical components
102ACAX SMD precision tweezers With angled pointed tips for vertical use, reverse clamping
action for easy handling
7SA Precision tweezers Curved, relieved, with pointed tips
Kits
Swiss high precision tweezers in a kit
*Not available in North America
www.labem.pl
331
High-quality precision tweezers for microelectronics,
light engineering and SMD work.
5-piece tweezer kit.
Blunted edges prevent PCB damage.
Special stainless steel, non-magnetic, non-rusting,
acid-proof.
In an ESD-safe plastic case.
Erem Premium Tweezers
Model Description
3500TP* Erem Premium Tweezers
contents:
3SA Precision tweezers With pointed tips straight
2ASA Precision tweezers With flat rounded tips for gripping small components,
tip width 2 mm/.078 Inch
7SA Precision tweezers Curved, relieved, with pointed tips
102ACA SMD precision tweezers Tip width 0.5 mm/.019 Inch, angled 45°
15AGW Cutting tweezers With narrow oblique head, for soft wires, hardened cutting
edges for increased service life
Swiss high precision tweezers in a kit
*Not available in North America
Kits
www.labem.pl
332
Complete accessories for easy pick-up and
immediate set-down of components or silicon
wafers.
Set for laboratory work.
In an ESD-safe plastic case.
Vacuum kit
Model Description
3000KCESD* Vacuum kit
contents:
3000ESD Handle Size: 400 x 320 x 150 mm/15.748 x 12.598 x 5.905 Inch, 2.2 kg,
with axial switch, ergonomic, serrated finger grip
3200 Adapter, rotatable through 360° Stainless-steel adapter, rotatable through 360°, straight suction tip
for direct working or as an adapter for section tips or suction cups
3231 Adapter fix For working with 3300 suction tips
3305Z, 3310Z, 3315 Suction needles, 45°, stainless steel
For working 3231 adapter
2052E Suction cup, For working with 3200 or 3232 adapter
dia. 4.5 mm/.177 Inch, silicone
KDS 260L Suction cup, dia. 9.5 mm/.374 Inch
3740 Table holder
3714Z Diaphragm pump 230 V, 5 l/min, max. vacuum –250 mbar
3008ESD Tube, flexible, 1.8 m, ESD-safe
3717 Filter for tube 3008ESD
102ACA SMD tweezers 115 mm/4.527 Inch, with curved tips and blunted edges,
for vertical working with small components, stainless steel,
non-reflecting surface, non-magnetic
Kits
Swiss high precision tools in a kit
*Not available in North America
www.labem.pl
333
Kits
www.labem.pl
334334
Knives, Shearcutters, Screwdriver, Kits
www.labem.pl
335335
www.labem.pl
336
Knives & Blades
Knives
Blades for XN100
Blades for XN200 and XN210
Order No. Description Size
Inch mm
XN100 Knife, Light duty for soft material 5 13/16 148
XN200 Knife, Medium duty for hard material 5 3/4 146
XN210 Knife, Heavy duty plastic handle for coars jobs 5 7/16 137
XNS100 Light and medium duty knife set
contains 10 assorted blades:
XN100, XN200, XNB103 (2 pcs.), XNB105 (2 pcs.),
XNB101, XNB203, XNB205 (2 pcs.), XNB201
Order No. Description Pack
quantity
XNB101 Blade, Standard 5
XNB103 Blade, Fine pointed 5
XNB103B Blade, Fine pointed 100
XNB105 Blade, Stencil 5
Order No. Description Pack
quantity
XNB201 Blade, Chisel 5
XNB203 Blade, General purpose 5
XNB205 Blade, Pointed 5
www.labem.pl
337
Shearcutter – general purpose
Sheet metal Snip
Wire Stripper & Cutters
Shearcutters & Pliers
Order No. Description Size
Inch mm
170M Shearcutter, red handles 5 127
175M Shearcutter with safety clips, red handles 5 127
Order No. Description Size
Inch mm
86NCG Snip, electronic 6 1/2 165
Order No. Description Size
Inch mm
100XV Wire Stripper & Cutter, adjustable 5 127
101SNV Wire Stripper & Cutter, spring-opening 5 127
Cutting copper wire to 0,8 mm diameter
www.labem.pl
338
Screwdriver & Nutdriver Sets
Mini Screwdriver Set with Slotted/Phillips Screwdrivers
Offset Ratches Screwdriver Set
Order No. Description
M60 Mini Screwdriver Set with Slotted/Phillips Screwdrivers (7 pcs.)
Order No. Description
XL75 Offset Ratches Screwdriver Set
www.labem.pl
339
Screwdriver Set for slotted Screws – Inch Size
Screwdriver Set for Hex Socket Screws – Inch Size
Order No. Description Length Colour
Inch mm
PS88 Screwdriver Set for Slotted Screws – Inch Size
consists of:
P3321* Screwdriver, Midget 3/32“ (2,38 mm) 3 1/2 89 green
P181* Screwdriver, Midget 1/8“ (3,18 mm) 3 1/2 89 red
P5321* Screwdriver, Midget 5/32“ (3,97 mm) 3 1/2 89 black
P3161* Screwdriver, Midget 3/16“ (4,76 mm) 3 1/2 89 orange
P141 Screwdriver, Midget 1/8“ (3,18 mm) 3 1/2 89 amber
P0* Screwdriver, Philips Nr. 0 3 1/2 89 blue
P1* Screwdriver, Philips Nr. 1 3 1/2 89 brown
P2* Screwdriver, Philips Nr. 2 3 1/2 89 amber
TA2* Torque amplifier handle black
Order No. Description Length
Inch mm
PS89 Screwdriver Set for Hex Socket Screws – Inch Size
consists of:
P18* Screwdriver, Midget, Hex, 0,028“ (0,71 mm) 3 1/2 89
P19* Screwdriver, Midget, Hex, 0,035“ (0,89 mm) 3 1/2 89
P20* Screwdriver, Midget, Hex, 0,050“ (1,27 mm) 3 1/2 89
P21* Screwdriver, Midget, Hex, 1/16“ (1,59 mm) 3 1/2 89
P22* Screwdriver, Midget, Hex, 5/64“ (1,98 mm) 3 1/2 89
P23* Screwdriver, Midget, Hex, 3/32“ (2,38 mm) 3 1/2 89
P764* Screwdriver, Midget, Hex, 7/64“ (2,78 mm) 3 1/2 89
P24* Screwdriver, Midget, Hex, 1/8“ (3,18 mm) 3 1/2 89
TA2* Torque amplifier handle, black
*Discontinued
www.labem.pl
340
Screwdriver & Nutdriver Sets
Compact Convertible Hex Socket Srewdriver Set – Metric Size
Nutdriver Set – Inch Sizes
Order No. Description Length
Inch mm
PS90MM Compact Convertible Hex Socket Srewdriver Set – Metric Size
consists of:
P71* Screwdriver, Midget, Hex, 1,27 mm 3 1/2 89
P72* Screwdriver, Midget, Hex, 1,5 mm 3 1/2 89
P73* Screwdriver, Midget, Hex, 0,89 mm 3 1/2 89
P74* Screwdriver, Midget, Hex, 2,5 mm 3 1/2 89
P75* Screwdriver, Midget, Hex, 3 mm 3 1/2 89
P76* Screwdriver, Midget, Hex, 4 mm 3 1/2 89
P77* Screwdriver, Midget, Hex, 5 mm 3 1/2 89
P78* Screwdriver, Midget, Hex, 0,89 mm 3 1/2 89
TA2* Torque amplifier handle, black
*Discontinued
Order No. Description Length Colour
Inch mm
PS120 Nutdriver Set – Inch Size
consists of:
P3* Nutdriver, Midget, 3/32“ (2,38 mm) 3 1/2 89 blue
P4* Nutdriver, Midget, 1/18“ (3,18 mm) 3 1/2 89 red
P5* Nutdriver, Midget, 5/32“ (3,97 mm) 3 1/2 89 amber
P6* Nutdriver, Midget, 3/16“ (4,76 mm) 3 1/2 89 black
P7* Nutdriver, Midget, 7/32“ (5,56 mm) 3 1/2 89 brown
P8* Nutdriver, Midget, 1/4“ (6,35 mm) 3 1/2 89 rred
P9* Nutdriver, Midget, 9/32“ (7,14 mm) 3 1/2 89 orange
P10* Nutdriver, Midget, 5/16“ (7,94 mm) 3 1/2 89 amber
P11* Nutdriver, Midget, 11/32“ (8,73 mm) 3 1/2 89 green
P12* Nutdriver, Midget, 3/8“ (9,53 mm) 3 1/2 89 blue
TA2* Torque amplifier handle black
www.labem.pl
341
Compact Convertible Nutdriver Set – Metric Sizes
Order No. Description Length
Inch mm
PS121MM Compact Convertible Nutdriver Set – Metric Size
consists of:
P3MM* Nutdriver, Midget, 3 mm (0,118“) 3 1/2 89
P35MM* Nutdriver, Midget, 3,5 mm (0,138“) 3 1/2 89
P4MM* Nutdriver, Midget, 4 mm (0,157“) 3 1/2 89
P45MM* Nutdriver, Midget, 4,5 mm (0,177“) 3 1/2 89
P5MM* Nutdriver, Midget, 5 mm (0,197“) 3 1/2 89
P55MM* Nutdriver, Midget, 5,5 mm (0,217“) 3 1/2 89
P6MM* Nutdriver, Midget, 6 mm (0,236“) 3 1/2 89
P7MM* Nutdriver, Midget, 7 mm (0,276“) 3 1/2 89
P8MM Nutdriver, Midget, 8 mm (0,315“) 3 1/2 89
P10MM Nutdriver, Midget, 10 mm (0,394“) 3 1/2 89
TA2* Torque amplifier handle, black
*Discontinued
www.labem.pl
342
Series 99 Service Kits & Sets
Order No. Description
99MP Multi-purpose Tool Kit, Roll Kit
consists of:
991X Regular Handle
994 T-Handle
99X5 Extension, 4“
99820 Blade, Screwdriver, Phillips No. 0
99821 Blade, Screwdriver, Phillips No. 1
99822 Blade, Screwdriver, Phillips No. 2
996 Blade, Nutdriver, 3/16“
997 Blade, Nutdriver, 7/32“
998 Blade, Nutdriver, 1/4“
998M Blade, Nutdriver, magnetic, 1/4“
999 Blade, Nutdriver, 9/32“
9910 Blade, Nutdriver, 5/16“
9911 Blade, Nutdriver, 11/32“
9912 Blade, Nutdriver, 3/8“
9914 Blade, Nutdriver, 7/16“
9916 Blade, Nutdriver, 1/2“
9920 Blade, Screwdriver, Allen Hex Type, 0,050“
9921 Blade, Screwdriver, Allen Hex Type, 1/16“
9922 Blade, Screwdriver, Allen Hex Type, 5/64“
9923 Blade, Screwdriver, Allen Hex Type, 3/32“
99764 Blade, Screwdriver, Allen Hex Type, 7/64“
9924 Blade, Screwdriver, Allen Hex Type, 1/8“
99964 Blade, Screwdriver, Allen Hex Type, 9/64“
9925 Blade, Screwdriver, Allen Hex Type, 5/32“
9926 Blade, Screwdriver, Allen Hex Type, 3/16“
9961 Blade, Bristol 6-flute Multiple Spline, 0,048“
9962 Blade, Bristol 6-flute Multiple Spline, 0,060“
9963 Blade, Bristol 4-flute Multiple Spline, 0,069“
9964 Blade, Bristol 6-flute Multiple Spline, 0,072“
9965 Blade, Bristol 4-flute Multiple Spline, 0,076“
9966 Blade, Bristol 6-flute Multiple Spline, 0,096“
9967 Blade, Bristol 6-flute Multiple Spline, 0,111“
9968 Blade, Bristol 6-flute Multiple Spline, 0,145“
9969 Blade, Bristol 6-flute Multiple Spline, 0,183“
99125 Blade, Screwdriver, Slotted, 1/8“
99811 Blade, Screwdriver, Slotted, 3/16“
99250 Blade, Screwdriver, Slotted, 1/4“
99312 Blade, Screwdriver, Slotted, 5/16“
9938 Reamer, 1/8“ x 3/8“
www.labem.pl
343
Order No. Description
99SPC Personal Computer Repair Kit
consists of:
E1 IC-Inserter
X1 IC-Extractor
T1 Tweezer
R1 Gripping Tool
99820 Blade, Screwdriver, Phillips No. 0
99821 Blade, Screwdriver, Phillips No. 1
9910XTD Torx Blade No. 10
9915XTD Torx Blade No. 15
996 Blade, Nutdriver, 3/16“
998 Blade, Nutdriver, 1/4“
99811 Blade, Screwdriver, Slotted, 3/16“
Order No. Description
99PS40 Allen Hex Type Screwdriver Set – Inch Size
consists of:
991X Regular Handle
99X5 Extension 4“
9920 Blade, Screwdriver, Allen Hex Type, 0,050“
9921 Blade, Screwdriver, Allen Hex Type, 1/16“
9922 Blade, Screwdriver, Allen Hex Type, 5/64“
9923 Blade, Screwdriver, Allen Hex Type, 3/32“
99764 Blade, Screwdriver, Allen Hex Type, 7/64“
9924 Blade, Screwdriver, Allen Hex Type, 1/8“
99964 Blade, Screwdriver, Allen Hex Type, 9/64“
9925 Blade, Screwdriver, Allen Hex Type, 5/32“
9926 Blade, Screwdriver, Allen Hex Type, 3/16“
www.labem.pl
344
Series 99 Service Kits & Sets
Order No. Description
99PS41MM Allen Hex Type Screwdriver Set – Metric Size
consists of:
991X Regular Handle
99X5 Extension 4“
9971MM Blade, Screwdriver, Allen Hex Type, 1,27 mm
9972MM Blade, Screwdriver, Allen Hex Type, 1,5 mm
9973MM Blade, Screwdriver, Allen Hex Type, 2 mm
9974MM Blade, Screwdriver, Allen Hex Type, 2,5 mm
9975MM Blade, Screwdriver, Allen Hex Type, 3 mm
9976MM Blade, Screwdriver, Allen Hex Type, 4 mm
9977MM Blade, Screwdriver, Allen Hex Type, 5 mm
Order No. Description
99PS40BP Ballpoint Allen Hex Socket Type Screwdriver Set – Inch
consists of:
991X Extension 4“
99X5 Verlängerung, 102 mm
9920BP Blade, Screwdriver, Allen Hex Type, Ballpoint, 0,05“
9921BP Blade, Screwdriver, Allen Hex Type, Ballpoint, 1/16“
9922BP Blade, Screwdriver, Allen Hex Type, Ballpoint, 5/64“
9923BP Blade, Screwdriver, Allen Hex Type, Ballpoint, 3/32“
99764BP Blade, Screwdriver, Allen Hex Type, Ballpoint, 7/64“
9924BP Blade, Screwdriver, Allen Hex Type, Ballpoint, 1/8“
99964BP Blade, Screwdriver, Allen Hex Type, Ballpoint, 9/64“
9925BP Blade, Screwdriver, Allen Hex Type, Ballpoint, 5/32“
9926BP Blade, Screwdriver, Allen Hex Type, Ballpoint, 3/16“
www.labem.pl
345
Order No. Description
99PS41MMBP Ballpoint Allen Hex Socket Type Screwdriver Set – Metric Size
consists of:
991X Regular Handle
99X5 Extension 4“
9971MMBP Blade, Screwdriver, Allen Hex Type, Ballpoint, 1,27 mm
9972MMBP Blade, Screwdriver, Allen Hex Type, Ballpoint, 1,5 mm
9973MMBP Blade, Screwdriver, Allen Hex Type, Ballpoint, 2 mm
9974MMBP Blade, Screwdriver, Allen Hex Type, Ballpoint, 2,5 mm
9975MMBP Blade, Screwdriver, Allen Hex Type, Ballpoint, 3 mm
9976MMBP Blade, Screwdriver, Allen Hex Type, Ballpoint, 4 mm
9977MMBP Blade, Screwdriver, Allen Hex Type, Ballpoint, 5 mm
Order No. Description
99PS50 Screwdriver & Nutdriver Set
consists of:
991X Regular Handle
99X5 Extension 4“
99821 Blade, Screwdriver, Phillips No. 0
99822 Blade, Screwdriver, Phillips No. 1
996 Blade, Nutdriver, 3/16“
997 Blade, Nutdriver, 7/32“
998 Blade, Nutdriver, 1/4“
999 Blade, Nutdriver, 9/32“
9910 Blade, Nutdriver, 5/16“
9911 Blade, Nutdriver, 11/32“
9912 Blade, Nutdriver, 3/8“
99811 Blade, Screwdriver, Slotted, 3/16“
99250 Blade, Screwdriver, Slotted, 1/4“
www.labem.pl
346
Series 99 Service Kits & Sets
Order No. Description
99PS51MM Interchangeable Shank, Nutdriver Set – Metric Size
consists of:
991X Regular Handle
99X5 Extension 4“
994MM Blade, Nutdriver, 4 mm
9945MM Blade, Nutdriver, 4,5 mm
995MM Blade, Nutdriver, 5 mm
9955MM Blade, Nutdriver, 5,5 mm
996MM Blade, Nutdriver, 6 mm
997MM Blade, Nutdriver, 7 mm
998MM Blade, Nutdriver, 8 mm
999MM Blade, Nutdriver, 9 mm
9910MM Blade, Nutdriver, 10 mm
9911MM Blade, Nutdriver, 11 mm
Order No. Description
99PS60 Bristol Multiple Spline Socket Screwdriver Set
consists of:
991X Regular Handle
99X5 Extension 4“
9961 Blade, Bristol 6-flute Multiple Spline, 0,048“
9962 Blade, Bristol 6-flute Multiple Spline, 0,060“
9963 Blade, Bristol 4-flute Multiple Spline, 0,069“
9964 Blade, Bristol 6-flute Multiple Spline, 0,072“
9965 Blade, Bristol 4-flute Multiple Spline, 0,076“
9966 Blade, Bristol 6-flute Multiple Spline, 0,096“
9967 Blade, Bristol 6-flute Multiple Spline, 0,111“
9968 Blade, Bristol 6-flute Multiple Spline, 0,145“
9969 Blade, Bristol 6-flute Multiple Spline, 0,183“
www.labem.pl
347
Order No. Description
99XTD7 Torx Screwdriver Tool Set
consists of:
991X Regular Handle
9910XTD Torx Blade No. 10
9915XTD Torx Blade No. 15
9920XTD Torx Blade No. 20
9925XTD Torx Blade No. 25
9927XTD Torx Blade No. 27
9930XTD Torx Blade No. 30
Single Tools for Service Kits and Set
Order No. Description
99831 Screwdriver, Pozidriv No. 1
99832 Screwdriver, Pozidriv No. 2
996XTD Torx Blade No. 6
998XTD Torx Blade No. 8
www.labem.pl
348
Tool Cases
Order No. Description
T0044130000 TCE150ST Tool Case synthetic material
with special tools out of Apex Tools
product lines – Metric Size
consists of:
991X Regular Handle
994R T-Ratching Handle
99X5 Extension 4“
9971MM Blade, Screwdriver, Allen Hex, 1,27 mm
9972MM Blade, Screwdriver, Allen Hex, 1,5 mm
9973MM Blade, Screwdriver, Allen Hex, 2 mm
9974MM Blade, Screwdriver, Allen Hex, 2,5 mm
9975MM Blade, Screwdriver, Allen Hex, 3 mm
9976MM Blade, Screwdriver, Allen Hex, 4 mm
9977MM Blade, Screwdriver, Allen Hex, 5 mm
994MM Blade, Nutdriver, 4 mm
9945MM Blade, Nutdriver, 4,5 mm
995MM Blade, Nutdriver, 5 mm
9955MM Blade, Nutdriver, 5,5 mm
996MM Blade, Nutdriver, 6 mm
997MM Blade, Nutdriver, 7 mm
998MM Blade, Nutdriver, 8 mm
999MM Blade, Nutdriver, 9 mm
99820 Blade, Screwdriver, Phillips No.0
99821 Blade, Screwdriver, Phillips No.1
99822 Blade, Screwdriver, Phillips No.2
99811 Blade, Screwdriver, Slotted, 3/16“
Order No. Description
Final appearance may vary
99250 Blade, Screwdriver, Slotted, 1/4“
99312 Blade, Screwdriver Slotted, 5/16“
9938 Reamer, 1/8“ x 3/8“
Erop330 Tip Cutter, 130 mm, 40°
542E Flat Nose Plier
543E Round Nose Plier
2211P Needle Nose Plier
170M Shearcutter, red handles
812N Side Cutter
612N Side Cutter
86CG Snip electronic
SX101 Phillips Screwdriver, Stubby No.1
SX102 Phillips Screwdriver, Stubby No.2
XST101 Phillips Screwdriver, Super-tru-tip No.1
0056103699 Soldering Iron W61, 60W
0051304199 DS7N Desoldering head for W 61
XL75 Offset Ratches, Screwdriver Set
103S Wire Stripper & Cutter, Cam Stop Adjustable
0016100402 Hand File Cut 2, 100 mm
AC16C Wrench, 150 mm
0054002599 RL 60/40 - 100 solder
0060403504 Y35CM Ultralock, Measuring Tape 5 m
www.labem.pl
349
Order No. Description
TC100ST Tool Case with USA Standard Assortment –
Inch Size
consists of:
991X Regular Handle
991R Ratching Handle
994R T-Ratching Handle
99X5 Extension 4“
99X10 Extension 7“
9961 Blade, Bristol 6-flute Multiple Spline, 0,048“
9962 Blade, Bristol 6-flute Multiple Spline, 0,060“
9963 Blade, Bristol 4-flute Multiple Spline, 0,069“
9964 Blade, Bristol 6-flute Multiple Spline, 0,072“
9965 Blade, Bristol 4-flute Multiple Spline, 0,076“
9966 Blade, Bristol 6-flute Multiple Spline, 0,096“
9967 Blade, Bristol 6-flute Multiple Spline, 0,111“
9968 Blade, Bristol 6-flute Multiple Spline, 0,145“
9969 Blade, Bristol 6-flute Multiple Spline, 0,183“
9920 Blade, Screwdriver, Allen Hex Type, 0,050“
9921 Blade, Screwdriver, Allen Hex Type, 1/16“
9922 Blade, Screwdriver, Allen Hex Type, 5/64“
9923 Blade, Screwdriver, Allen Hex Type, 3/32“
99764 Blade, Screwdriver, Allen Hex Type, 7/64“
9924 Blade, Screwdriver, Allen Hex Type, 1/8“
99964 Blade, Screwdriver, Allen Hex Type, 9/64“
9925 Blade, Screwdriver, Allen Hex Type, 5/32“
9926 Blade, Screwdriver, Allen Hex Type, 3/16“
99125 Blade, Screwdriver, Slotted, 1/8“
99811 Blade, Screwdriver, Slotted, 3/16“
99250 Blade, Screwdriver, Slotted, 1/4“
99312 Blade, Screwdriver, Slotted, 5/16“
99820 Blade, Screwdriver, Phillips No.0
99821 Blade, Screwdriver, Phillips No.1
99822 Blade, Screwdriver, Phillips No.2
9938 Reamer, 1/8“ x 3/8“
42H Seizer, Straight Nose, Serrated jaw
46CG Wrench, adjustable, 6“
50CG Plier, adjustable, 6“
51CG Plier, Long Nose, 7“
53CG Plier, adjustable, 4“
54CG Plier, diagonal, 4“
66CG Plier, diagonal, 6“
5 7 C G P l i e r, N e e d l e N o s e , 16 “
59CG Plier, Special Purpose, 8“
86CG Electronic Snip, cushion grip, 6,5“
103S Wire Stripper & Cutter, Cam Stop Adjustable
M60 Mini Screwdriver Set (7 pcs.)
XL75 Offset Ratches, Screwdriver Set
600 4-way Pocket Tool Screwdriver/Nutdriver
SB1 Convertible Blade
R3323 Screwdriver, Round Blade,
Pocket Clip Style, 3/32“ x 3“
R181 Screwdriver, Round Blade,
Pocket Clip Style, 1/8“ x 2“
R184 Screwdriver, Round Blade, Regular, 1/8“ x 2“
R3164 Screwdriver, Round Blade, Regular, 3/16“ x 4“
R3166 Screwdriver, Round Blade, Regular, 3/16“ x 6“
R144 Screwdriver, Round Blade, Regular, 1/4“ x 4“
R146 Screwdriver, Round Blade, Regular, 1/4“ x 6“
SX101 Screwdriver, Phillips, Stubby No.1
XST100 Screwdriver, Phillips, Super-tru-tip No.0
XST101 Screwdriver, Phillips, Super-tru-tip No.1
XST102 Screwdriver, Phillips, Super-tru-tip No.2
S3161 Screwdriver, Square Blade, Stubby, 3/8“
S5161 Screwdriver, Square Blade, Stubby, 5/16“
S388 Screwdriver, Square Blade, Regular, 3/8“
S5166 Screwdriver, Square Blade, Regular, 5/16“
P18 Screwdriver, Allen Hex Type, 0,028“
P19 Screwdriver, Allen Hex Type, 0,035“
HS6 Nutdriver, Hollow, 3/16“
HS8 Nutdriver, Hollow, 1/4“
HS10 Nutdriver, Hollow, 5/16“
HS11 Nutdriver, Hollow, 11/32“
HS12 Nutdriver, Hollow, 3/8“
HS14 Nutdriver, Hollow, 7/16“
HS16 Nutdriver, Hollow, 1/2“
HS18 Nutdriver, Hollow, 9/16“
998M Blade, Nutdriver, 1/4“, magnetic
9910M Blade, Nutdriver, 5/16“, magnetic
PS120 Nutdriver Set
Order No. Description
www.labem.pl
350
Tool Cases
Order No. Description
TCMB100ST Tool Case with Tools – Inch Size
consists of:
991X Regular Handle
991R Ratching Handle
994R T-Ratching Handle
99X5 Extension 4“
99X10 Extension 7“
9961 Blade, Bristol 6-flute Multiple Spline, 0,048“
9962 Blade, Bristol 6-flute Multiple Spline, 0,060“
9963 Blade, Bristol 4-flute Multiple Spline, 0,069“
9964 Blade, Bristol 6-flute Multiple Spline, 0,072“
9965 Blade, Bristol 4-flute Multiple Spline, 0,076“
9966 Blade, Bristol 6-flute Multiple Spline, 0,096“
9967 Blade, Bristol 6-flute Multiple Spline, 0,111“
9968 Blade, Bristol 6-flute Multiple Spline, 0,145“
9969 Blade, Bristol 6-flute Multiple Spline, 0,183“
9920 Blade, Screwdriver, Allen Hex Type, 0,050“
9921 Blade, Screwdriver, Allen Hex Type, 1/16“
9922 Blade, Screwdriver, Allen Hex Type, 5/64“
9923 Blade, Screwdriver, Allen Hex Type, 3/32“
99764 Blade, Screwdriver, Allen Hex Type, 7/64“
9924 Blade, Screwdriver, Allen Hex Type, 1/8“
99964 Blade, Screwdriver, Allen Hex Type, 9/64“
9925 Blade, Screwdriver, Allen Hex Type, 5/32“
9926 Blade, Screwdriver, Allen Hex Type, 3/16“
99125 Blade, Screwdriver, Slotted, 1/8“
99811 Blade, Screwdriver, Slotted, 3/16“
99250 Blade, Screwdriver, Slotted, 1/4“
99312 Blade, Screwdriver, Slotted, 5/16“
99820 Blade, Screwdriver, Phillips No.0
99821 Blade, Screwdriver, Phillips No.1
99822 Blade, Screwdriver, Phillips No.2
9938 Reamer 1/8“ x 3/8“
42H Seizer, Straight Nose, Serrated jaw
46CG Wrench, adjustable, 6“
50CG Plier, adjustable, 6“
51CG Plier, Long Nose, 7“
53CG Plier, adjustable, 4“
54CG Plier, diagonal, 4“
66CG Plier, diagonal, 6“
57CG Plier, Needle-Nose, 16“
59CG Plier, Special Purpose, 8“
86CG Electronic Snip, cushion grip, 6,5“
103S Wire Stripper & Cutter, Cam Stop Adjustable
K22 Electricians` knife
M60 Mini Screwdriver Set (7 pcs.)
XL75 Offset Ratches, Screwdriver Set
600 4-way Pocket Tool Screwdriver/Nutdriver
SB1 Convertible Blade
R3323 Screwdriver, Round Blade,
Pocket Clip Style, 3/32“ x 3“
R181 Screwdriver, Round Blade,
Pocket Clip Style, 1/8“ x 2“
R184 Screwdriver, Round Blade, Regular, 1/8“ x 2“
R5325 Screwdriver, Round Blade, Regular, 5/32“
R3164 Screwdriver, Round Blade, Regular, 3/16“ x 4“
R3166 Screwdriver, Round Blade, Regular, 3/16“ x 6“
R144 Screwdriver, Round Blade, Regular, 1/4“ x 4“
R146 Screwdriver, Round Blade, Regular, 1/4“ x 6“
SX101 Screwdriver, Phillips, Stubby No.1
XST100 Screwdriver, Phillips, Super-tru-tip No.0
XST101 Screwdriver, Phillips, Super-tru-tip No.1
XST102 Screwdriver, Phillips, Super-tru-tip No.2
S3161 Screwdriver, Square Blade, Stubby, 3/8“
S5161 Screwdriver, Square Blade, Stubby, 5/16“
S388 Screwdriver, Square Blade, Regular, 3/8“
S5166 Screwdriver, Square Blade, Regular, 5/16“
P18 Screwdriver, Allen Hex Type, 0,028“
P19 Screwdriver, Allen Hex Type, 0,035“
HS6 Nutdriver, Hollow, 3/16“
HS8 Nutdriver, Hollow, 1/4“
HS10 Nutdriver, Hollow, 5/16“
HS11 Nutdriver, Hollow, 11/32“
HS12 Nutdriver, Hollow, 3/8“
HS14 Nutdriver, Hollow, 7/16“
HS16 Nutdriver, Hollow, 1/2“
HS18 Nutdriver, Hollow, 9/16“
998M Blade, Nutdriver, 1/4“, magnetic
9910M Blade, Nutdriver, 5/16“, magnetic
PS120 Nutdriver Set
Order No. Description
www.labem.pl
351
Specials
Order No. Description
XL70 Offset Ratchet Screwdriver Set
consists of:
XL3 Allen Hex Screw Bit 0,050“ (1,27 mm)
XL4 Allen Hex Screw Bit 1/16“ (1,54 mm)
XL5 Allen Hex Screw Bit 5/64“ (1,98 mm)
XL6 Allen Hex Screw Bit 3/32“ (2,38 mm)
XL7 Allen Hex Screw Bit 7/64“ (1,54 mm)
XL8 Allen Hex Screw Bit 1/8“ (3,17 mm)
XL9 Allen Hex Screw Bit 9/64“ (3,57 mm)
XL10 Allen Hex Screw Bit 5/32“ (3,97 mm)
XL12 Allen Hex Screw Bit 3/16“ (4,76 mm)
XL14 Allen Hex Screw Bit 7/32“ (5,56 mm)
XL16 Allen Hex Screw Bit 1/4“ (6 mm)
XL17 Slotted Screw Bit 1/4“ (6 mm)
XL18 Allen Hex Screw Bit 5/16“ (7,94 mm)
XL20 Phillips Screw Bit No. 1
XL21 Phillips Screw Bit No. 2
XL24 Adapter bit
XL25 Slotted Screw Bit 3/16“ (4,76 mm)
XL27 Offset Ratchet, reversible
XL50X Screwdriver Extension
Offset Ratchet Screwdriver Set
www.labem.pl
Index Exploded Drawings
Model Page
WTCP 51 ........................................................................ 380
WX 1 .............................................................................. 381
WX 2 .............................................................................. 381
WXA 2 ............................................................................ 382
WXD 2 ............................................................................ 382
WXDP 120 ...................................................................... 383
WXDV 120 ..................................................................... 383
WXP 65 .......................................................................... 384
WXP 120 ........................................................................ 384
WXP 200 ........................................................................ 385
Model Page
DSX 80 ........................................................................... 353
DSX 120 ......................................................................... 353
DXV 80 ........................................................................... 354
DSXV 80 ......................................................................... 354
FE 25 .............................................................................. 355
FE 50 .............................................................................. 355
FE 50M ........................................................................... 356
FE 75 .............................................................................. 356
FE 80 .............................................................................. 357
HAP 200 ......................................................................... 357
LR 21 .............................................................................. 358
MPR 80........................................................................... 358
PUD 151R ....................................................................... 359
Pyropen + Pyropen Piezo ................................................ 359
Pyropen JR. ..................................................................... 360
W 61 / W 101 ................................................................. 360
WD 1 / WD 1000 ............................................................ 361
WD 1M / WD 1000M ..................................................... 361
WD 2 / WD 2000 ............................................................ 362
WD 2M ........................................................................... 363
WD 3M ........................................................................... 362
WDD 161V ..................................................................... 363
WDD 81V ....................................................................... 364
WDH 10T / 20T .............................................................. 364
WFE ................................................................................ 365
WFE 2ES ......................................................................... 366
WFE 2S ........................................................................... 365
WFE 4S ........................................................................... 367
WFE P ............................................................................. 366
WHA 900 ........................................................................ 367
WHA 3000P .................................................................... 368
WHA 3000V ................................................................... 368
WHP 1000 ...................................................................... 369
WHP 3000 ...................................................................... 369
WMD 1S ......................................................................... 370
WMD 3 / WMD 3K2 ....................................................... 370
WMRT ............................................................................ 371
WP 65 ............................................................................ 371
WP 80 ............................................................................ 372
WP 120 .......................................................................... 372
WP 200 .......................................................................... 373
WR 2 .............................................................................. 372
WR 3M ........................................................................... 374
WS 51 ............................................................................. 374
WS 81 ............................................................................. 375
WSD 81 .......................................................................... 376
WSD 81i ......................................................................... 377
WSD 121 ........................................................................ 377
WSD 151 ........................................................................ 378
WSD 161 ........................................................................ 378
WSF 81D ........................................................................ 379
WSP 80 ........................................................................... 379
WTA 50 .......................................................................... 380
352
www.labem.pl
353
DSX 80DSX 120
www.labem.pl
354
Exploded Drawings
DSXV 80
DXV 80
www.labem.pl
355
FE 25
FE 50
www.labem.pl
356
Exploded Drawings
FE 50M
FE 75
www.labem.pl
357
Gedruckt durch: Martinu am: 1.2.2012
FE 80
HAP 200
www.labem.pl
358
Gedruckt durch: Martinu am: 1.2.2012
Exploded Drawings
LR 21
MPR 80
www.labem.pl
359
PUD 151R
Pyropen + Pyropen Piezo
www.labem.pl
360
Gedruckt durch: Martinu am: 1.2.2012
5 11 343 99
120V
5
6
1
210
99
230V 5 61 216 99
5 11 3
01
99
5 11
622
99
5 1
0
20
3
99
5 1
0
660
99
5
87 16
7
82
5
87 16
795
W101
5
70 0
31
99
5
87 16
009
5
87 16
780
5 11 34
2
99
5
6
1
200
99
120V
5 61 2
06 99
230V
5 1
0
20
3
99
5 11 3
00
99
5 11
622
99
5 1
0
660
99
5
87 16
780
5
87 16
009
5
87 16
7
82
5
87 16
795
W6
1
5
70 030 99
4D9R048/4
Pyropen JR.
W 61, W 101
Exploded Drawings
www.labem.pl
361
WD 1 / WD 1000
Since 3. Quarter 2007
WD 1M / WD 1000M
Since 3. Quarter 2007
www.labem.pl
362
Exploded Drawings
WD 2 / WD 2000
Since 3. Quarter 2007
WD 3M
www.labem.pl
363
WD 2M
Since 3. Quarter 2007
WDD 161V
www.labem.pl
364
Exploded Drawings
WDD 81V
WDH 10T / 20T
www.labem.pl
365
WFE
WFE 2S
www.labem.pl
366
Exploded Drawings
WFE 2ES
WFE P
www.labem.pl
367
WFE 4S
WHA 900
www.labem.pl
368
570048 99
587578 17
587578 15
587578 14
587578 18
587117 95
587578 11
513703 99 T3,15A (230V)
587369 95 T6,3A(120V)
515049 99
515043 99
4D9R832
587578 16
587577 92
USA
570073 99
DK
570043 99I
570072 99
CH
570070 99
GB
570040 99DF
587577 96 (230V)
587578 04 (120V)
587577 94 (230V)
587578 03 (120V)
587577 95
515043 99
515049 99
587577 96 (230V)
587578 04 (120V)
587577 91
587577 92
587367 94
587117 18
587577 98
587577 98 T4A(230V)
587578 08 T8A(120V)
570048 99
USA
570073 99
DK
570043 99I
570072 99
CH
570070 99
GB
570040 99DF
4D9R0829
WHA3000P
Exploded Drawings
WHA 3000P WHA 3000V
www.labem.pl
369
WHP 1000
587577 88
570048 99
587577 82
587577 84 (230V)
587578 06 (120V)
587577 83 (230V)
587578 05 (120V)
587577 85 (230V)
587578 07 (120V)
587577 86 (230V)
587578 02 (120V)
USA
570073 99
DK
570043 99I
570072 99
CH
570070 99
GB
570040 99DF
WHP3000
WHP 3000
www.labem.pl
370
Exploded Drawings
WMD 1S
WMD 3 / WMD 3K2
www.labem.pl
371
WMRT
WP 65
www.labem.pl
372
Exploded Drawings
WP 120 WP 80
www.labem.pl
373
Gedruckt durch: Martinu am: 26.9.2011
WP 200
WR 2
www.labem.pl
374
4D9R905
WR 3M
Exploded Drawings
WS 51
valid from production date November 2005
consists of PU 81 and soldering iron WR 3M
www.labem.pl
375
valid until production date October 2005
WS 51
WS 81
valid until production date October 2005
www.labem.pl
376
Exploded Drawings
WS 81
valid from production date November 2005
consists of PU 81 and soldering iron WSP 80
WSD 81
www.labem.pl
377
WSD 81iWSD 121
www.labem.pl
Explosionszeichnungen
378
WSD 151
Exploded Drawings
587447 29 (WSP)
587488 05
USA
DK
I
CH
GB
DF
570043 99
570073 99
570072 99
570070 99
570040 99
570048 99
529161 99
WSP80
4D9R731/4
WSD161
587489 43
587489 70
USA
587489 66 (120V)
587489 34
587489 64 (°F)
587447 57
522419 99
USA
587489 42 (°C)
587487 74 (230V)
521417 99 T800mA (230V)
587157 20 T1,6A(120V)
(5 Stck)
(3 Stck)
587038 92 (WSP)
587039
13
(4 Stck)
587487 28
(4 Stck)
LT-Serie
587447 11
587447 12
587447 30
587447 10
587489 02
587487 32
587488 04
587488 07
587447 13
587489 76 (120V)
587489 44 (230V)
WSD 161
www.labem.pl
379
5 87 328 78
LT-Serie
5 87 328 81 P5
5 87 328 80 P8
5 87 328 82
5 87 328 85
5 87 328 84
5 87 328 83
4D9R734_1
1
5 87 489 02
WSF 81D
WSP 80
www.labem.pl
380
Exploded Drawings
WTA 50
WTCP 51
www.labem.pl
381
WX 1
WX 2
www.labem.pl
382
Exploded Drawings
WXA 2
WXD 2
www.labem.pl
383
WXDP 120WXDV 120
www.labem.pl
384
WXP 120
Exploded Drawings
WXP 65
www.labem.pl
385
WXP 200
www.labem.pl
386
Numerical Index
Order No. Page Order No. Page Order No. Page Order No. Page
185-1.5MM .....................................216
185-10MM ......................................216
185-10MM ......................................216
185-2.5MM .....................................216
185-2MM ........................................216
185-3MM ........................................216
185-4MM ........................................216
185-5MM ........................................216
185-6MM ........................................216
185-7MM ........................................216
185-8MM ........................................216
185-9MM ........................................216
320-000X ........................................217
320-00X ..........................................217
320-0X ............................................217
320-1X.............................................217
320-20X ..........................................217
320-2X ............................................217
326-000X ........................................217
326-00X ..........................................217
326-0X ............................................217
326-1X.............................................217
326-20X ..........................................217
326-2X ............................................217
440-1-PZDX .....................................217
440-215-PZDX .................................217
440-22-PZDX ...................................217
440-2-PZDX .....................................217
440-3-PZDX .....................................217
440-4-PZDX .....................................217
440-TX-05X ......................................215
440-TX-06X ......................................215
440-TX-07X ......................................215
440-TX-08X ......................................215
440-TX-09X ......................................215
440-TX-10X ......................................215
440-TX-15X ......................................215
440-TX-20X ......................................215
440-TX-25X ......................................215
440-TX-27X ......................................215
440-TX-30X ......................................215
440-TX-40X ......................................215
445-000X ........................................215
445-00X ..........................................215
445-0X ............................................215
445-10X...........................................215
445-20X ..........................................215
445-30X ..........................................215
446-0X ............................................214
446-1-PZDX .....................................214
446-1X.............................................214
446-2-PZDX .....................................214
446-2X ............................................214
4910-AX ..........................................220
4910X..............................................220
491-A-PZDX .....................................218
491-AX ............................................220
491-PZDX ........................................218
491X................................................220
492-A-PZDX .....................................218
492-AX ............................................220
492-PZDX ........................................218
492X................................................220
493-A-PZDX .....................................218
493-AX ............................................220
493-PZDX ........................................218
493X................................................220
49-A-TX-05 ......................................219
49-A-TX-06 ......................................219
49-A-TX-07 ......................................219
49-A-TX-08 ......................................219
49-A-TX-09 ......................................219
49-A-TX-10.......................................219
49-A-TX-15.......................................219
49-A-TX-20 ......................................219
49-B-TX-25 ......................................219
49-B-TX-27 ......................................219
49-B-TX-30 ......................................219
49-B-TX-40 ......................................219
49-TX-05 ..........................................219
49-TX-06 ..........................................219
49-TX-07 ..........................................219
49-TX-08 ..........................................219
49-TX-09 ..........................................219
49-TX-10 ..........................................219
49-TX-15 ..........................................219
49-TX-20 ..........................................219
49-TX-25 ..........................................219
49-TX-27 ..........................................219
49-TX-30 ..........................................219
49-TX-40 ..........................................219
4CT5A6 ............................................188
4CT5A7 ............................................188
4CT5A8 ............................................188
4CT5B7 ............................................188
4CT5B8 ............................................188
4CT5C6 ............................................188
4CT5C7 ............................................188
4CT5C8 ............................................188
4CT5D7............................................188
4CT5D8............................................188
4CT6C7 ............................................189
4CT6C8 ............................................189
4CT6D7............................................189
4CT6D8............................................189
4CT6D9............................................189
4CT6E7 ............................................189
4CT6E8 ............................................189
4ETA ................................................184
4ETB ................................................184
4ETBB ..............................................184
4ETBS ..............................................184
4ETC ................................................184
4ETCC ..............................................184
4ETCS ..............................................184
4ETD ................................................184
4ETDS ..............................................184
4ETE ................................................184
4ETF ................................................184
4ETH ................................................184
4ETK ................................................184
4ETL ................................................184
4ETM ...............................................184
4ETO ................................................184
4ETP ................................................184
4ETR ................................................184
4ETS ................................................184
4PTA6 ..............................................186
4PTA7 ..............................................186
4PTA8 ..............................................186
4PTAA7............................................187
4PTAA8............................................187
4PTAA9............................................187
4PTB6 ..............................................186
4PTB7 ..............................................186
4PTB8 ..............................................186
4PTB9 ..............................................186
4PTBB7 ............................................187
4PTBB8 ............................................187
4PTBB9 ............................................187
4PTC7 ..............................................186
4PTC8 ..............................................186
4PTC9 ..............................................186
4PTCC7 ............................................187
4PTCC8 ............................................187
4PTCC9 ............................................187
4PTCS7 ............................................186
4PTD7 ..............................................186
4PTD8 ..............................................186
4PTD9 ..............................................186
4PTDD7 ...........................................187
4PTDD8 ...........................................187
4PTDD9 ...........................................187
4PTDS7 ............................................186
4PTE8 ..............................................186
4PTE9 ..............................................186
4PTF7 ..............................................187
4PTF8 ..............................................187
4PTH6 ..............................................186
4PTH7 ..............................................186
4PTH8 ..............................................186
4PTK6 ..............................................186
4PTK7 ..............................................186
4PTK8 ..............................................186
4PTL6 ..............................................186
4PTL7 ..............................................186
4PTL8 ..............................................186
4PTM7 .............................................186
4PTM8 .............................................186
4PTM9 .............................................186
4PTO6 ..............................................186
4PTO7 ..............................................186
4PTO8 ..............................................186
4PTR7 ..............................................186
4PTR8 ..............................................186
4PTS7 ..............................................186
4PTS8 ..............................................186
4SPI15210 .......................................191
4SPI15211 .......................................191
4SPI15212 .......................................191
4SPI15213 .......................................191
4SPI26200 .......................................191
4SPI26201 .......................................191
4SPI26206 .......................................191
4SPI40220 .......................................191
4SPI40224 .......................................191
4SPI40225 .......................................191
4SPI40226 .......................................191
4SPI80230 .......................................191
4SPI80231 .......................................191
4SPI80232 .......................................191
4SPI80234 .......................................191
4SPI80235 .......................................191
4SPI80237 .......................................191
6966EK ..............................................71
AM-1.5MM ......................................218
AM-10MM .......................................218
AM-2.5MM ......................................218
AM-2MM .........................................218
AM-3MM .........................................218
AM-3MM-3 .....................................218
AM-3MM-4 .....................................218
AM-4MM .........................................218
AM-5MM .........................................218
AM-5MM-4 .....................................218
AM-6MM .........................................218
AM-6MM-4 .....................................218
AM-7MM .........................................218
AM-8MM .........................................218
APC5132CM ....................................229
KDS1412P .......................................227
KDS141P .........................................227
KDS14TNP .......................................228
KDS1512P .......................................227
KDS16112P .....................................227
KDS1612P .......................................227
KDS161P .........................................227
KDS16TNP .......................................228
KDS1712P .......................................227
KDS1812P .......................................227
KDS181P .........................................227
KDS18TNP .......................................228
KDS1912P .......................................227
KDS191P .........................................227
KDS2012P .......................................227
KDS201P .........................................227
KDS20TNP .......................................228
KDS2112P .......................................227
KDS2212P .......................................227
KDS221P .........................................227
KDS22TNP .......................................228
KDS2312P .......................................227
KDS2512P .......................................227
KDS260L ..........................................225
KDS260M ........................................225
KDS260S..........................................225
KDS301 ...........................................225
KDS3012P .......................................227
KDS660 ...........................................227
KDS805S6........................................226
KDS806V .........................................224
KDS810S6........................................226
KDS816 ...........................................226
KDS825 ...........................................229
KDS900 ...........................................229
KDS901 ...........................................229
KDSSAMPLEPACK ............................227
M-490 .............................................216
M-490-2 ..........................................216
M-497 .............................................216
NT1 .................................................170
NT1S ................................................170
NT1SC..............................................170
NT1X ...............................................170
NT4 .................................................170
NT6 .................................................170
NTA .................................................170
NTAX ...............................................170
NTB .................................................170
NTC .................................................170
NTD .................................................170
NTGW ..............................................170
NTH .................................................170
NTK .................................................170
NTMS ..............................................170
PS100A ..............................................92
PS2001A ............................................92
PS200A ..............................................92
SA21A ...............................................92
SA21A1 .............................................92
SM15748BK ......................................97
SMT0504A .......................................182
SMT1206D .......................................182
SMT8K .............................................182
SMTA ...............................................182
T0051000199 ..................................150
T0051005399 ..................................150
T0051005571 ..................................150
T0051031199 ..................................184
T0051170699 ....................................90
T0051170799 ....................................90
T0051170899 ....................................90
T0051170999 ....................................90
T0051176799 ..................................189
T0051301099 ....................................96
T0051301199 ....................................96
T0051301299 ....................................96
T0051301399 ....................................93
T0051301799 ....................................93
T0051302699 ....................................96
T0051302799 ....................................96
T0051302899 ....................................96
T0051303199 ..............................95, 96
T0051312099 ........................39, 51, 69
T0051312599 ..................................131
T0051314000 ..................................194
T0051314100 ..................................194
T0051314200 ..................................194
T0051314300 ..................................194
T0051314400 ..................................194
T0051314500 ..................................194
T0051314600 ..................................194
T0051314700 ..................................194
T0051314800 ..................................194
T0051315000 ..................................194
T0051315100 ..................................194
T0051315200 ..................................194
T0051315399 ..................................194
T0051317199 ..................................158
T0051317399 ..................................141
T0051317499 ..................................141
T0051317799 ..................................141
T0051317899 ..................................141
T0051318099 ............................50, 155
T0051318299 ..................................155
T0051318399 ..................................154
T0051319099 ................50, 53, 61, 154
T0051319899 ..................................157
T0051320199 ............................60, 157
T0051320299 ..................................157
T0051320499 ..................................155
T0051320599 ..................................155
T0051325010 ..................................197
T0051325099 ..................................197
www.labem.pl
387
Order No. Page Order No. Page Order No. Page Order No. Page
T0051325110 ..................................197
T0051325199 ..................................197
T0051325210 ..................................197
T0051325299 ..................................197
T0051325310 ..................................197
T0051325399 ..................................197
T0051325410 ..................................197
T0051325499 ..................................197
T0051325510 ..................................197
T0051325599 ..................................197
T0051325610 ..................................197
T0051325699 ..................................197
T0051325710 ..................................197
T0051325799 ..................................197
T0051325899 ..................................197
T0051325910 ..................................197
T0051325999 ..................................197
T0051326010 ..................................197
T0051326099 ..................................197
T0051326110 ..................................197
T0051326199 ..................................197
T0051326210 ..................................197
T0051326299 ..................................197
T0051326310 ..................................197
T0051326399 ..................................197
T0051326410 ..................................197
T0051326499 ..................................197
T0051326510 ..................................197
T0051326599 ..................................197
T0051326610 ..................................197
T0051326699 ..................................197
T0051350099 ..................................196
T0051350199 ..................................196
T0051350299 ..................................196
T0051350399 ..................................196
T0051350499 ..................................156
T0051351099 ..................................195
T0051351199 ..................................195
T0051351299 ..................................195
T0051351399 ..................................195
T0051351499 ..................................195
T0051351599 ..................................195
T0051351699 ..................................195
T0051352799 ..................................195
T0051353099 ..................................195
T0051353299 ..................................195
T0051353399 ..................................195
T0051355099 ..................................195
T0051355199 ..................................195
T0051355299 ..................................195
T0051360499 ..................................154
T0051377099 ..................................195
T0051379099 ..................................194
T0051382499 ....................................94
T0051382599 ....................................94
T0051382799 ..............................94, 96
T0051383299 ....................................85
T0051383599 ....................................88
T0051384099 ....................................94
T0051384199 ....................................94
T0051384799 ....................................83
T0051386099 ....................................95
T0051386199 ....................................95
T0051386299 ...................................95
T0051386399 ....................................95
T0051386499 ....................................95
T0051386599 ...................................95
T0051386699 ...................................95
T0051386799 ....................................95
T0051386899 ....................................95
T0051386999 ....................................95
T0051387099 ...................................95
T0051387299 ....................................95
T0051387399 ....................................95
T0051387499 ....................................95
T0051387599 ....................................95
T0051387699 ....................................95
T0051387799 ....................................95
T0051387899 ....................................95
T0051387999 ....................................95
T0051388099 ....................................95
T0051388199 ....................................95
T0051388299 ....................................95
T0051388399 ....................................95
T0051388499 ....................................95
T0051388599 ....................................95
T0051388699 ....................................95
T0051388799 ....................................95
T0051388899 ....................................95
T0051500699 ..................................137
T0051502099 ..................................130
T0051502699 ....................................88
T0051502799 ..............................28, 69
T0051502899 ....................................39
T0051507699 ..................................136
T0051508099 ..................................136
T0051508699 ..................................136
T0051512199 .................16, 18, 19, 24,
................................. 26, 51, 53, 60, 61
T0051512499 ..............................94, 96
T0051512699 ....................................96
T0051512799 ....................................96
T0051514799 ....................................37
T0051515299 ..................................137
T0051515399 ............................50, 155
T0051515599 ....................................72
T0051515699 ..................................131
T0051516199 ................24, 37, 50, 144
T0051516799 ..................................137
T0051516899 ..................................136
T0051516999 ............................17, 141
T0051517199 ......................17, 18, 140
T0051517299 ............................60, 157
T0051605999 ....................................42
T0051606099 ....................................42
T0051607599 ....................................43
T0051608799 ....................................43
T0051612099 ..................................193
T0051612199 ............................193, 42
T0051612299 ..................................193
T0051612399 ..................................193
T0051612499 ..................................193
T0051612599 ..................................193
T0051612799 ..................................193
T0051612999 ..................................193
T0051613099 ..................................193
T0051613299 ..................................193
T0051613499 ............................43, 192
T0051613599 ............................43, 193
T0051614099 ..................................193
T0051614199 ..................................193
T0051614299 ............................43, 193
T0051614399 ..................................193
T0051615099 ..................................193
T0051615199 ..................................193
T0051615699 ....................................42
T0051615899 ..................................193
T0051615999 ............................42, 193
T0051616099 ..............................42, 43
T0051616199 ..................................192
T0051616599 ..................................192
T0051616699 ..................................192
T0051616799 ..................................192
T0051616899 ..................................192
T0051616999 ..................................192
T0051617299 ..................................192
T0051644399 ..................................192
T0051644499 ..................................192
T0051644599 ..................................192
T0051644699 ..................................192
T0051644799 ............................43, 192
T0051644899 ..................................192
T0051645099 ............................43, 192
T0052474999 ..................................195
T0052475099 ..................................184
T0052503199 ....................................91
T0052503299 ....................................91
T0052509899 ....................................97
T0052510699 ..................................149
T0052512599 ..................................131
T0052541000 ..................................130
T0052609899 ....................................97
T0052616299 ..........................130, 149
T0052620299 ..................................185
T0052702899 ....................................86
T0052702999 ....................................86
T0052704099 ....................................90
T0052704299 ....................................90
T0052704399 ....................................90
T0052711599 ......................68, 69, 158
T0052711699 ..................................159
T0052711799 ............................52, 159
T0052711899 ..................................158
T0052711999 .............................159,67
T0052712099 ..................................159
T0052811699 ....................................39
T0052812199 ....................................39
T0052812299 ....................................39
T0052812699 ..................................131
T0052820699 ..............................38, 39
T0052822699 ..............................38, 39
T0052910999 ....................................85
T0052916199 ......................28, 29, 146
T0052916399 ..................................147
T0052916699 ..........................130, 148
T0052917099 ............................28, 147
T0052917199 ..................................140
T0052918099 ................24, 50, 53, 146
T0052918199 ..................................146
T0052918499 ..............................50, 51
T0052918599 ..................................131
T0052918699 ..................................131
T0052918799 ..................................149
T0052918999 ..................................147
T0052919099 ..................................140
T0052919399 ......................27, 51, 144
T0052919499 ..................................144
T0052919799 ....................................37
T0052919899 ....................................37
T0052919999 ..................................145
T0052920099 ..................................145
T0052920199 ......................16, 18, 143
T0052920299 ............................60, 143
T0052920399 ......................17, 18, 140
T0052920499 ..................................140
T0052920599 ..................................145
T0052920699 ..................................145
T0052920799 ..................................144
T0052921199 ............................19, 142
T0052921299 ..................................142
T0052921499 ..................................131
T0052921599 ......................26, 61, 142
T0052921699 ..................................142
T0053118099 ....................................84
T0053118499 ....................................84
T0053118599 ....................................25
T0053119099 ..................79, 83, 84, 87
T0053119199 ................79, 84, 87, 115
T0053124699 ....................................85
T0053163699 ..................................224
T0053165699 ..................................224
T0053171670 ....................................71
T0053171699 ....................................71
T0053210599 ....................................31
T0053220699 ....................................31
T0053222499 ....................................31
T0053222699 ....................................31
T0053250699 ....................................29
T0053252699 ....................................29
T0053252699 ....................................29
T0053260699 ....................................28
T0053262699 ....................................28
T0053266671 ..............................36, 37
T0053266699 ....................................69
T0053268699 ....................................69
T0053276699 ....................................28
T0053277670 ....................................27
T0053278670 ....................................33
T0053293699 ....................................41
T0053295699 ........................23, 26, 27
T0053296699 ....................................26
T0053297699 ....................................26
T0053312599 ..................................146
T0053313199 ..................................147
T0053313399 ..................................158
T0053315199 ..........................130, 148
T0053316499 ....................................89
T0053316599 ....................................89
T0053316699 ....................................89
T0053316799 ....................................88
T0053334699 ........................70, 76, 77
T0053336699 ........................70, 76, 78
T0053338699 ..................77, 78, 79, 87
T0053355699 ....................................77
T0053359699 ....................................78
T0053364699 ..............................79, 87
T0053364899 ....................................86
T0053366699 ........................49, 50, 51
T0053368399 ....................................50
T0053368699 ....................................50
T0053370699 ...............................76,81
T0053371699 ....................................87
T0053377699 ........49, 53, 59, 61, 66, 68
T0053378699 ....................................68
T0053380699 ....................................53
T0053400699 ........................23, 24, 25
T0053402670 ....................................24
T0053402699 ....................................24
T0053415699 ....................................23
T0053417699 ..................15, 18, 19, 33
T0053418699 ....................................18
T0053419699 ....................................18
T0053420699 ..................15, 16, 17, 33
T0053425699 ..............................66, 67
T0053426699 ..............................60, 59
T0053427699 ....................................19
T0053428699 ....................................60
T0053429699 ....................................60
T0053430699 ....................................67
T0053631699 ..................................134
T0053631999 ..................................134
T0053632199 ..................................133
T0053632299 ..................................133
T0053632399 ..................................133
T0053632499 ..................................134
T0053632699 ..................................135
T0053632999 ..................................134
T0053633899 ..................................135
T0053634399 ..................................135
T0053634499 ..................................133
T0053635299 ..................................130
T0053638699 ..................................128
T0053640299 ..................................128
T0053640799 ..................................132
T0053641099 ..................................132
T0053641400 ..................................134
T0053641599 ..................................135
T0053642199 ..................................132
T0053650699 ..................................109
T0053651689 ..................................109
T0053657199 ..........................108, 112
T0053657299 ..........................107, 112
T0053657399 ..........................108, 109,
..............................................112, 113, 115
T0053657499 ..........................107, 108,
..............................................109, 112, 119
T0053657599 .................................120
T0053657699 ..................................118
T0053657799 ..................................115
T0053657899 ..................................114
T0053657999 ..................................113
T0053658099 ..................................114
T0053658899 ..................................110
T0053658999 ..................................110
T0053659099 ..................................123
T0053659199 ..................................116
T0053659299 ..................................117
T0053659399 ..................................115
T0053659899 ..................................114
T0053660699 ..................................106
T0053661699 ..................................106
T0053663699 ..................................107
T0053665699 ..................................107
T0053666699 ..................................111
www.labem.pl
T0053666799 ..................................111
T0053670699 ..................................129
T0053900699 ..........................210, 209
T0053901699 ............................209, 21
T0053909199 ..................................211
T0053909299 ..................................211
T0053909399 ..................................211
T0053909499 ..................................211
T0053909599 ..................................211
T0054103999 ..................................184
T0054104099 ..................................184
T0054104599 ..................................184
T0054130799 ..................................186
T0054170399 ..................................184
T0054210799 ..................................188
T0054210899 ..................................188
T0054211799 ..................................188
T0054212899 ..................................188
T0054213899 ..................................188
T0054230799 ..................................189
T0054231899 ..................................189
T0054240799 ..................................190
T0054240899 ..................................190
T0054241799 ..................................190
T0054241899 ..................................190
T0054242899 ..................................190
T0054250799 ..................................190
T0054250899 ..................................190
T0054251799 ..................................190
T0054251899 ..................................190
T0054412199 ..................................180
T0054414199 ..................................185
T0054414399 ..................................185
T0054414499 ..................................185
T0054414599 ..................................185
T0054414699 ..................................185
T0054414799 ..................................185
T0054414999 ..................................185
T0054415299 ..................................185
T0054415399 ..................................185
T0054426099 ..................................185
T0054426199 ..................................185
T0054426299 ..................................185
T0054426399 ..................................185
T0054426499 ..................................185
T0054426599 ..................................185
T0054426699 ..................................185
T0054426799 ..................................185
T0054426899 ..................................185
T0054426999 ..................................185
T0054427099 ..................................185
T0054440111 ..................................177
T0054440311 ..................................177
T0054440410 ..................................177
T0054440411 ..................................177
T0054440499 ..................................177
T0054440510 ..................................177
T0054440511 ..................................177
T0054440599 ..................................177
T0054440610 ..................................178
T0054440611 ..................................178
T0054440699 ..................................178
T0054440710 ..................................177
T0054440711 ..................................177
T0054440799 ..................................177
T0054440810 ..................................178
T0054440811 ..................................178
T0054440873 ..................................178
T0054440877 ..................................178
T0054440881 ..................................178
T0054440899 ..................................178
T0054440910 ..................................177
T0054440911 ..................................177
T0054440999 ..................................177
T0054441010 ..................................178
T0054441011 ..................................178
T0054441099 ..................................178
T0054441110 ..................................177
T0054441199 ..................................177
T0054441211 ..................................177
T0054441311 ..................................177
T0054441411 ..................................177
T0054441499 ..................................177
T0054441510 ..................................177
T0054441511 ..................................177
T0054441599 ..................................177
T0054441699 ..................................179
T0054441799 ..................................182
T0054442011 ..................................177
T0054442099 ..................................177
T0054442171 ..................................178
T0054442210 ..................................182
T0054442271 ..................................182
T0054442299 ............................35, 182
T0054442311 ..................................178
T0054442399 ..................................178
T0054442410 ..................................178
T0054442499 ..................................178
T0054442510 ..................................177
T0054442599 ..................................177
T0054442610 ..................................177
T0054442699 ..................................177
T0054442710 ..................................177
T0054442799 ..................................177
T0054442810 ..................................177
T0054442899 ..................................177
T0054443010 ..................................180
T0054443099 ..................................180
T0054443110 ..................................180
T0054443199 ..................................180
T0054443210 ..................................180
T0054443299 ..................................180
T0054443310 ..................................182
T0054443399 ............................35, 182
T0054443510 ..................................177
T0054443599 ..................................177
T0054443699 ..................................177
T0054443710 ..................................177
T0054443799 ..................................177
T0054443810 ..................................177
T0054443899 ..................................177
T0054443910 ..................................178
T0054443999 ..................................178
T0054444010 ..................................177
T0054444099 ..................................177
T0054444110 ..................................182
T0054444199 ............................35, 182
T0054444210 ..................................177
T0054444299 ..................................177
T0054444310 ..................................177
T0054444399 ..................................177
T0054444410 ..................................178
T0054444499 ..................................178
T0054444510 ..................................178
T0054444599 ..................................178
T0054444810 ..................................177
T0054444899 ..................................177
T0054444999 ..................................179
T0054445099 ..................................183
T0054445199 ..................................183
T0054445299 ..................................183
T0054445399 ..................................183
T0054445499 ..................................183
T0054445599 ..................................183
T0054445699 ..................................183
T0054446099 ..................................183
T0054446199 ..................................183
T0054446299 ..................................183
T0054446789 ..................................181
T0054446999 ..................................177
T0054447810 ..................................178
T0054447899 ..................................178
T0054447910 ..................................178
T0054447999 ..................................178
T0054448199 ..................................178
T0054448210 ..................................178
T0054448211 ..................................178
T0054448299 ..................................178
T0054448399 ..................................180
T0054448499 ..................................178
T0054448610 ..................................178
T0054448699 ..................................178
T0054448710 ..................................178
T0054448799 ..................................178
T0054448899 ..................................177
T0054448910 ..................................177
T0054448911 ..................................177
T0054449410 ..................................177
T0054449499 ..................................177
T0054449699 ..................................177
T0054449799 ..................................177
T0054449899 ..................................177
T0054450199 ..................................181
T0054450299 ..................................181
T0054450399 ..................................181
T0054450499 ..................................181
T0054450599 ..................................181
T0054450699 ..................................181
T0054450799 ..................................181
T0054450899 ..................................181
T0054450999 ..................................181
T0054451099 ..................................181
T0054451110 ..................................178
T0054451199 ..................................178
T0054451399 ..................................183
T0054451611 ..................................177
T0054451611 ..................................177
T0054451699 ..................................177
T0054451711 ..................................177
T0054451711 ..................................177
T0054451799 ..................................177
T0054451811 ..................................177
T0054451811 ..................................177
T0054451899 ..................................177
T0054451999 ..................................178
T0054451999 ..................................178
T0054452010 ..................................179
T0054452011 ..................................179
T0054452099 ..................................179
T0054452110 ..................................179
T0054452111 ..................................179
T0054452199 ..................................179
T0054452210 ..................................179
T0054452211 ..................................179
T0054452299 ..................................179
T0054452310 ..................................179
T0054452311 ..................................179
T0054452399 ..................................179
T0054452410 ..................................179
T0054452411 ..................................179
T0054452499 ..................................179
T0054452510 ..................................179
T0054452511 ..................................179
T0054452599 ..................................179
T0054452610 ..................................179
T0054452611 ..................................179
T0054452699 ..................................179
T0054452710 ..................................179
T0054452711 ..................................179
T0054452799 ..................................179
T0054452810 ..................................179
T0054452811 ..................................179
T0054452899 ..................................179
T0054452910 ..................................179
T0054452911 ..................................179
T0054452999 ..................................179
T0054453010 ..................................179
T0054453099 ..................................179
T0054453110 ..................................179
T0054453199 ..................................179
T0054453210 ..................................179
T0054453299 ..................................179
T0054453310 ..................................179
T0054453399 ..................................179
T0054453410 ..................................179
T0054453499 ..................................179
T0054453510 ..................................179
T0054453511 ..................................179
T0054453599 ..................................179
T0054453699 ..................................179
T0054453710 ..................................179
T0054453711 ..................................179
T0054453799 ..................................179
T0054453899 ..................................179
T0054453911 ..................................179
T0054453999 ..................................179
T0054454011 ..................................179
T0054454099 ..................................179
T0054460199 ..................................165
T0054460299 ..................................165
T0054460399 ..................................164
T0054460499 ..................................164
T0054460599 ..................................164
T0054460699 ..................................164
T0054460799 ..................................165
T0054460899 ..................................164
T0054460999 ..................................164
T0054461099 ..................................165
T0054461199 ..................................164
T0054461299 ..................................164
T0054461399 ..................................165
T0054462499 ..................................165
T0054462599 ..................................165
T0054465199 ..................................167
T0054465299 ..................................166
T0054465399 ..................................166
T0054465499 ..................................166
T0054465699 ..................................167
T0054466699 ..................................166
T0054466799 ..................................166
T0054466899 ..................................166
T0054470110 ..................................172
T0054470199 ..................................172
T0054470210 ..................................172
T0054470299 ..................................172
T0054470310 ..................................172
T0054470399 ..................................172
T0054470410 ..................................172
T0054470499 ..................................172
T0054470510 ..................................172
T0054470599 ..................................172
T0054470610 ..................................172
T0054470699 ..................................172
T0054470710 ..................................172
T0054470799 ..................................172
T0054470810 ..................................172
T0054470899 ..................................172
T0054470910 ..................................172
T0054470999 ..................................172
T0054471010 ..................................172
T0054471099 ..................................172
T0054471110 ..................................173
T0054471199 ..................................173
T0054471210 ..................................173
T0054471299 ..................................173
T0054471310 ..................................172
T0054471399 ..................................172
T0054471410 ..................................173
T0054471499 ..................................173
T0054471510 ..................................172
T0054471599 ..................................172
T0054471610 ..................................172
T0054471699 ..................................172
T0054471710 ..................................172
T0054471799 ..................................172
T0054471810 ..................................172
T0054471899 ..................................172
T0054471999 ..................................174
T0054472099 ..................................174
T0054472299 ..................................174
T0054472310 ..................................175
T0054472399 ..................................175
T0054472499 ..................................175
T0054472599 ..................................175
T0054472699 ..................................175
T0054472799 ..................................175
T0054472899 ..................................175
T0054473010 ..................................172
T0054473099 ..................................172
T0054473190 ..................................173
T0054473190 ..................................173
T0054473199 ..................................173
T0054473290 ..................................173
T0054473299 ..................................173
388
Numerical Index
Order No. Page Order No. Page Order No. Page Order No. Page
www.labem.pl
389
T0054473390 ..................................173
T0054473399 ..................................173
T0054474010 ..................................172
T0054474099 ..................................172
T0054474110 ..................................172
T0054474199 ..................................172
T0054474210 ..................................172
T0054474299 ..................................172
T0054474310 ..................................172
T0054474399 ..................................172
T0054474410 ..................................172
T0054474499 ..................................172
T0054474510 ..................................172
T0054474599 ..................................172
T0054480199 ..................................176
T0054480299 ..................................176
T0054480399 ..................................176
T0054480499 ..................................176
T0054480599 ..................................176
T0054485010 ..................................168
T0054485099 ..................................168
T0054485110 ..................................168
T0054485199 ..................................168
T0054485210 ..................................169
T0054485299 ..................................169
T0054485310 ..................................168
T0054485399 ..................................168
T0054485410 ..................................169
T0054485499 ..................................169
T0054485510 ..................................168
T0054485599 ..................................168
T0054485610 ..................................168
T0054485699 ..................................168
T0054485710 ..................................168
T0054485799 ..................................168
T0054485810 ..................................168
T0054485899 ..................................168
T0054485910 ..................................168
T0054485999 ..................................168
T0054486010 ..................................168
T0054486099 ..................................168
T0054486199 ..................................169
T0054486210 ..................................168
T0054486299 ..................................168
T0054486310 ..................................168
T0054486399 ..................................168
T0054486410 ..................................168
T0054486499 ..................................168
T0054487210 ..................................169
T0054487299 ..................................169
T0054487310 ..................................168
T0054487399 ..................................168
T0054487410 ..................................168
T0054487499 ..................................168
T0054487510 ..................................169
T0054487599 ..................................169
T0054488010 ..................................169
T0054488099 ..................................169
T0054488110 ..................................168
T0054488199 ..................................168
T0054488210 ..................................168
T0054488299 ..................................168
T0054488310 ..................................168
T0054488399 ..................................168
T0054488410 ..................................168
T0054488499 ..................................168
T0054488510 ..................................168
T0054488599 ..................................168
T0054488610 ..................................168
T0054488699 ..................................168
T0054488710 ..................................168
T0054488799 ..................................168
T0054488810 ..................................169
T0054488899 ..................................169
T0054488910 ..................................169
T0054488999 ..................................169
T0054489010 ..................................169
T0054489099 ..................................169
T0054489110 ..................................169
T0054489199 ..................................169
T0054489210 ..................................169
T0054489299 ..................................169
T0054489310 ..................................169
T0054489399 ..................................169
T0054489410 ..................................169
T0054489499 ..................................169
T0054489510 ..................................169
T0054489599 ..................................169
T0054489610 ..................................169
T0054489699 ..................................169
T0054489710 ..................................169
T0054489799 ..................................169
T0054489810 ..................................169
T0054489899 ..................................169
T0054489910 ..................................169
T0054489999 ..................................169
T0054490010 ..................................169
T0054490099 ..................................169
T0054490110 ..................................169
T0054490199 ..................................169
T0054490210 ..................................169
T0054490299 ..................................169
T0054490310 ..................................169
T0054490399 ..................................169
T0056103699 ..................................151
T0056104667 ..................................189
T0056104668 ..................................189
T0056104669 ..................................189
T0056104699 ..................................151
T0056105699 ..................................151
T0056109399 ....................................90
T0056109699 ..................................151
T0056400599 ..................................152
T0056402199 ..................................152
T0056403799 ..................................153
T0056405399 ..................................153
T0058706794 ..................156, 194, 196
T0058713798 ......................72, 83, 203
T0058713799 ......................72, 83, 203
T0058720781 ..........................179, 184
T0058720786 ..................................187
T0058720787 ..................................187
T0058720788 ..................................187
T0058720789 ..................................187
T0058720794 ..........................184, 187
T0058720795 ..................................180
T0058725034 ....................................91
T0058725722 ....................................91
T0058725726 ....................................91
T0058725729 ....................................91
T0058725732 ....................................91
T0058725736 ....................................91
T0058725742 ....................................91
T0058727772 ..................................198
T0058727773 ..................................198
T0058727774 ..................................198
T0058727775 ..................................198
T0058727776 ..................................198
T0058727777 ..................................199
T0058727778 ..................................199
T0058727779 ..................................199
T0058727780 ..................................199
T0058727781 ..................................199
T0058727782 ..................................199
T0058727783 ..................................199
T0058727784 ..................................199
T0058727785 ..................................199
T0058727786 ..................................198
T0058727787 ..................................198
T0058727808 ..................................199
T0058727821 ..................................198
T0058727822 ..................................198
T0058727823 ..................................198
T0058735050 ..................................135
T0058735427 ..................................118
T0058735757 ..................................132
T0058735835 ..................................124
T0058735836 ..........................124, 133
T0058735837 ..........................124, 133
T0058735838 ..........................124, 133
T0058735840 ..................................117
T0058735845 ..................................115
T0058735855 ..................................125
T0058735856 ..................................125
T0058735860 ..................................123
T0058735863 ..................................125
T0058735864 ..................................125
T0058735865 ..................................135
T0058735866 ..................................135
T0058735869 ..................................125
T0058735870 ..................................125
T0058735871 ..................................125
T0058735879 ..................................121
T0058735895 ..................................122
T0058735909 ..................................115
T0058735915 ..................................117
T0058735924 ..................................123
T0058735936 ..................................122
T0058735937 ..................................122
T0058735938 ..................................122
T0058736804 ..................................202
T0058736807 ..................................202
T0058736814 ..................................202
T0058736818 ..................................202
T0058736833 ..................................202
T0058736837 ..................................202
T0058736838 ..................................202
T0058736839 ..................................202
T0058736840 ..................................201
T0058736841 ..................................201
T0058736842 ..................................201
T0058736843 ..................................201
T0058736867 ..................................200
T0058736870 ..................................200
T0058736875 ..................................203
T0058736880 ..................................202
T0058736881 ..................................200
T0058736882 ..................................200
T0058736883 ..................................200
T0058736890 ..................................202
T0058736891 ..................................202
T0058738850 ..............................51, 69
T0058744710 ..................................181
T0058744713 ....................................35
T0058744738 ....................................35
T0058744795 ..................................183
T0058744845 ..................................181
T0058744846 ..................................181
T0058744875 ..................................131
T0058744876 ..................................131
T0058747753 ..................................204
T0058747763 ..................................204
T0058747764 ..................................204
T0058747833 ..................................204
T0058747848 ..................................204
T0058747850 ..................................204
T0058747871 ..................................204
T0058747874 ..................................204
T0058747893 ..................................204
T0058747904 ..................................204
T0058747906 ..................................204
T0058747916 ..................................204
T0058747927 ..................................204
T0058747935 ..................................204
T0058747941 ..................................204
T0058747943 ..................................204
T0058747945 ..................................204
T0058747947 ..................................204
T0058747961 ..................................204
T0058747977 ..................................204
T0058747985 ..................................204
T0058747993 ..................................204
T0058747999 ..................................204
T0058748861 ..................................196
T0058748990 ....................................29
T0058750721 ..................................202
T0058750739 ..................................203
T0058750741 ..................................203
T0058750742 ..................................203
T0058750765 ..................................200
T0058750770 ..................................200
T0058750772 ..................................200
T0058750774 ..................................200
T0058751710 ..................................171
T0058751717 ..................................171
T0058751880 ....................................41
T0058754770 ..................................204
T0058754820 ..................................204
T0058754836 ..................................204
T0058754873 ...............................82,89
T0058754887 ..................................204
T0058754903 ..................................204
T0058754924 ...............................82,89
T0058754948 ....................................83
T0058754967 ..................................204
T0058754970 ....................................83
T0058755741 ....................................89
T0058755745 ....................................89
T0058755782 ....................................83
T0058757898 ....................................71
T0058761728 ..................................198
T0058761730 ....................................73
T0058761731 ....................................73
T0058761732 ...............................72,73
T0058762036 ..................................118
T0058762701 ..................................122
T0058762703 ..................................123
T0058762724 ....................................14
T0058762746 ..................................119
T0058762747 ..................................114
T0058762750 ..................................121
T0058762753 ..................................120
T0058762755 ..................................118
T0058762756 ..................................118
T0058762757 ..................................116
T0058762758 ..................................116
T0058762763 ..................................113
T0058762765 ..................................119
T0058762766 ..................................120
T0058762767 ..................................119
T0058762768 ..................................118
T0058762769 ..................................119
T0058762770 ..................................112
T0058762771 ..................................121
T0058762774 ..................................120
T0058762808 ..................................119
T0058762810 ..................................135
T0058763709 ..................................174
T0058763725 ..................................176
T0058763730 ....................................35
T0058763732 ....................................37
T0058764726 ....................................14
T0058765711 ...........................143,174
T0058765740 ....................................35
T0058765758 ...........................142,169
T0058765798 ..................................131
T0058765799 ..................................131
T0058765801 ......................51,156,196
T0058767701 ..................................212
T0058767702 ..................................212
T0058767703 ..................................212
T0058767704 ..................................213
T0058767705 ..................................213
T0058767706 ..................................213
TAL332CH ........................................229
WLSK200 ...........................................93
WLSK200T18 .....................................93
WLSK200T38 .....................................93
WPB1 ................................................95
Order No. Page Order No. Page Order No. Page Order No. Page
www.labem.pl
547 ..................................................304
3200 ................................321, 323, 332
3231 ................................321, 323, 332
3232 ................................................321
3303 ................................................322
3315 ........................................323, 332
3717 ........................................323, 332
3740 ........................................323, 332
50788 ..............................................311
024C................................................257
102ACA ..........................317, 323, 327,
........................................331, 332, 250
102ACAX ................................250, 230,
103ACA ...................250, 317, 327, 330
11N .................................................242
141SAP ............................................255
147A ...............................................294
147AT ..............................................294
1500BSF ..........................................296
1503E ..............................................297
150SA..............................................251
150SAD ...........................................251
150SAMB ........................317, 327, 352
150SAMF .................251, 317, 327, 330
1512N .............................................296
151SA..............................................251
1522N .............................................296
1522NA ...........................................297
1522NB ...........................................297
15AGS .............................................255
15AGW ............................................255
1884EPCM .......................................294
1SA..................................................241
1SASL ..............................................241
2041Z ..............................................321
2044Z ..............................................321
2052E ..............................322, 323, 332
20AS................................................240
21SA................................................243
2400KMS .........................................328
2403E ..............................................278
2404E ..............................................278
2411P ......................................306, 328
2411PD ...........................................306
2412E ..............................326, 328, 377
2422E ..............................................277
2432E ..............................................277
2442P ......................................307, 326
2443P ..............................................307
2470E ..............................................279
2475E ..............................................279
2476TX ............................................293
2476TX1 ..........................................292
2477E ..............................................278
2482E ......................................328, 279
249CER ............................................243
249SA..............................................243
24SA................................................247
258SA..............................................245
25SA................................................248
29W30 ............................................256
29Y30 ..............................................256
29Y32 ..............................................256
29Y34 ..............................................256
29Y36 ..............................................256
29Y40 ..............................................256
2ASA .......................................329, 331
2ASARU ...........................................248
2ASASL ....................................248, 326
2ASASLT ..........................................248
2SA..................................................245
2SASL ..............................................245
3000ESD ..........................................320
3000KCESD .............................323, 332
3008ESD ..................................323, 332
30SA................................................247
32BSA .............................................252
32BSA20 .........................................252
32BSA25 .........................................252
3300TPS ..........................................329
3305Z ......................................322, 323
3310Z ..............................322, 323, 332
3400TSMDU ....................................330
3500TP ............................................331
3600KU ...........................................326
3714Z ......................................323, 332
3900KC ...................................317, 327
39SA................................................251
3CBS ................................................246
3CS ..................................................241
3CSA ...............................................241
3CSASL ............................................241
3CTA ................................................241
3SA..................................329, 331, 241
3SASL ..............................................241
40SA................................................251
4SA..................................................244
4SASL ..............................................244
500103A .........................................312
500104A .........................................313
500210E ..........................................312
503E ................................................282
503ET ..............................................293
503ETF ............................................293
504AE .............................................282
505C................................................316
50789Z ............................................311
510AE .............................................308
512E ................................................281
512N ...............................................281
51SA................................246, 317, 327
51SASL ............................................247
522N ...............................................281
52ASA .............................................248
530E06 ............................................298
530E08 ............................................298
530E10 ............................................298
530E12 ............................................298
530E13 ............................................298
530E15 ............................................298
530E15 ............................................298
530E18 ............................................298
530E20 ............................................298
531E ................................................305
532N ...............................................281
53CSA .............................................241
542E ................................................305
543E ................................................304
544D ...............................................305
544E ................................................305
549E ................................................299
549E10 ............................................299
549E12 ............................................299
552E ................................................309
552S ........................................309, 318
554A ...............................................310
554E ................................................310
554TX ..............................................311
555E ................................................283
570E ................................................285
572E ................................................283
573E ................................................285
573EB ..............................................299
575E ................................................284
576TX ..............................................293
576TX1 ............................................292
577E ................................................282
582E ................................................283
582EW.............................................283
592E ................................................284
593AE .............................................284
595E ................................................282
595T ................................................292
595TF ..............................................292
599E ................................................281
599FO .....................................295, 319
599T ................................................291
599TF ..............................................291
599TFO ....................................295, 319
5ASA ...............................................247
5ASASL ............................................247
5BSA ...............................................246
5CSA ...............................................246
5FSA ................................................245
5MBS ...............................................245
5SA..................................................245
5SASL ..............................................245
600ASA ...........................................254
600JSA ............................................254
608ASA ...........................................254
612N ...............................................273
622N ...............................................273
622NA .............................................274
622NB .....................................274, 326
622TX ..............................................291
632N ...............................................273
632NCF ...................................274, 295
64SA................................................242
65ASA .............................................247
670E ................................................275
670EP ..............................275, 317, 327
670EPF ............................................275
676E ................................................274
776E ................................................274
792E ................................................274
7SA..........................247, 329, 330, 331
7SASL ..............................................247
80013C............................................313
808G ...............................................316
809IC...............................................313
812N ...............................................287
822N ...............................................287
884E ................................................288
886E ................................................288
896E ................................................287
91SA................................................254
940AS..............................................253
AAS .................................................242
AASA .......................................242, 326
AASASL ...........................................242
AAZ .................................................242
ACSA ...............................................240
AM ..................................................243
E15AGW ..........................................249
E2ASA .............................................249
E3CSA ..............................................249
E5SA ................................................249
E7SA ................................................249
EOODSA ..........................................249
EOOSA .............................................249
KDS260L ..........................................225
M4AS ..............................................244
M5S .................................................240
OOBSA ............................................242
OOCSA.............................................242
OODSA ............................................242
OOSA ...............................................242
OOSASL ...........................................242
RRS ..................................................243
SSSA ................................................243
XB29W301 ......................................256
XP600 ..............................................326
390
Numerical Index
Order No. Page Order No. Page Order No. Page
www.labem.pl
391
600 ..........................................349, 350
994 ..................................342, 346, 348
996 ..................................342, 343, 345
997 ..................................................342
998 ..................................................345
999 ..........................................342, 345
9910 ........................................342, 345
9911 ........................................342, 345
9912 ........................................342, 345
9914 ................................................342
9916 ................................................342
9920 ................................................342
9921 ........................342, 343, 349, 350
9921 ........................342, 343, 349, 350
9922 ........................342, 343, 349, 350
9922 ........................342, 343, 349, 350
9923 ........................342, 343, 349, 350
9923 ........................342, 343, 349, 350
9924 ........................342, 343, 349, 350
9924 ........................342, 343, 349, 350
9925 ........................342, 343, 349, 350
9926 ........................342, 343, 349, 350
9938 ................................348, 349, 350
9961 ..........................342, 346.349.350
9962 ................................346, 349, 350
9963 ................................346, 349, 350
9964 ................................346, 349, 350
9965 ................................346, 349, 350
9966 ................................346, 349, 350
9967 ................................346, 349, 350
9968 ................................346, 349, 350
9969 ................................346, 349, 350
99125 ......................................349, 350
99250 ..............................................345
99312 ..............................348, 349, 350
99312 ..............................348, 349, 350
99764 ......................342, 343, 349, 350
99764 ......................342, 343, 349, 350
99811 .............................343, 345, 348,
................................................349, 350
99820 .............................342, 343, 348,
................................................349, 350
99821 .............................342, 343, 345,
........................................348, 349, 350
99822 .............................342, 345, 348,
................................................349, 350
99831 ..............................................347
99832 ..............................................347
99964 ......................342, 343, 349, 350
100XV .............................................337
101S ................................................337
101SNV ...........................................337
103S ................................348, 349, 350
170M ......................................337, 348
175M ..............................................337
2211P ..............................................348
42H .........................................349, 350
46CG .......................................349, 350
50CG .......................................349, 350
51CG .......................................349, 350
53CG .......................................349, 350
542E ........................................348, 305
543E ........................................348, 304
54CG .......................................349, 350
57CG .......................................349, 350
59CG .......................................349, 350
612N .......................................348, 273
66CG .......................................349, 350
812N .......................................348, 287
86CG ...............................348, 349, 350
86NCG .............................................337
9910M ............................346, 349, 350
9910MM .........................................346
9910XTD .................................343, 347
9911MM .........................................346
9915XTD .................................343, 347
991R........................................349, 350
991X...............................342, 343, 344,
.......................................345, 346, 347,
........................................348, 349, 350
9920BP............................................344
9920XTD .........................................347
9921BP............................................344
9922BP............................................344
9923BP............................................344
9924BP............................................344
9925BP............................................344
9925XTD .........................................347
9926BP............................................344
9927XTD .........................................347
9930XTD .........................................347
9945MM .................................346, 348
994MM ...................................346, 348
994R................................348, 349, 350
9955MM .................................346, 348
995MM ...................................346, 348
996MM ...................................346, 348
996XTD ...........................................347
9971MM .................................344, 348
9971MMBP .....................................345
9972MM .................................344, 348
9972MMBP .....................................345
9973MM .................................344, 348
9973MMBP .....................................345
9973MMBP .....................................345
9974MM .................................344, 348
9974MMBP ....................................345
9975MM .................................344, 348
9975MMBP .....................................345
99764BP..........................................344
9976MM .................................344, 348
9976MMBP .....................................345
9977MM .................................344, 348
9977MMBP .....................................345
997MM ...................................346, 348
998M ..............................................349
998MM ...................................346, 348
998XTD ...........................................347
99964BP..........................................344
999MM ...................................346, 348
99MP...............................................342
99PS40 ............................................343
99PS40 ............................................343
99PS40BP ........................................344
99PS41MM ......................................344
99PS41MMBP .................................345
99PS50 ............................................345
99PS51MM ......................................346
99PS60 ............................................346
99SPC ..............................................343
99X10......................................349, 350
99X5.......................342, 343, 344, 345,
................................346, 348, 349, 350
99XTD7 ...........................................347
AC16C .............................................348
E1 ....................................................343
Erop330 ...........................................348
HS10 .......................................349, 350
HS11 .......................................349, 350
HS12 .......................................349, 350
HS14 .......................................349, 350
HS16 .......................................349, 350
HS18 .......................................349, 350
HS6 .........................................349, 350
HS8 .........................................349, 350
M60 ................................338, 349, 350
P0 ....................................................339
P1 ....................................................339
P10 ..................................................340
P10MM ...........................................341
P11 ..................................................340
P12 ..................................................340
P141 ................................................339
P18 ..................................339, 349, 350
P181 ................................................339
P19 ..................................339, 349, 350
P2 ....................................................339
P20 ..................................................339
P21 ..................................................339
P22 ..................................................339
P23 ..................................................339
P24 ..................................................339
P3 ....................................................340
P3161 ..............................................339
P3321 ........................................339, 34
P35MM ...........................................341
P3MM .............................................341
P4 ....................................................340
P45MM ...........................................341
P4MM .............................................341
P5 ....................................................340
P5321 ..............................................339
P55MM ...........................................341
P5MM .............................................341
P6 ....................................................340
P6MM .............................................341
P7 ....................................................340
P71 ..................................................340
P72 ..................................................340
P73 ..................................................340
P74 ..................................................340
P75 ..................................................340
P76 ..................................................340
P764 ................................................339
P77 ..................................................340
P78 ..................................................340
P7MM .............................................341
P8 ....................................................340
P8MM .............................................341
P9 ....................................................340
PS120 ..............................340, 349, 350
PS121MM ........................................341
PS88 ................................................339
PS89 ................................................339
PS90MM ..........................................340
R1....................................................343
R144........................................349, 350
R146........................................349, 350
R181........................................349, 350
R184........................................349, 350
R3164......................................349, 350
R3166......................................349, 350
R3323......................................349, 350
R5325..............................................350
S3161 ......................................349, 350
S388 ........................................349, 350
S5161 ......................................349, 350
S5166 ......................................349, 350
SB1 ..........................................349, 350
SX101 ..............................348, 349, 350
SX102 ..............................................348
T0016100402 ..................................348
T0044130000 ..................................348
T0051304199 ..................................348
T0054002599 ..................................348
T0056103699 ..................................348
T0060403504 ..................................348
T1 ....................................................343
TA2 ..................................339, 340, 341
TC100ST ..........................................349
TCMB100ST .....................................350
X1....................................................343
XL10 ................................................351
XL12 ................................................351
XL14 ................................................351
XL16 ................................................351
XL17 ................................................351
XL18 ................................................351
XL20 ................................................351
XL21 ................................................351
XL24 ................................................351
XL25 ................................................351
XL27 ................................................351
XL3 ..................................................351
XL4 ..................................................351
XL5 ..................................................351
XL50X ..............................................351
XL6 ..................................................351
XL7 ..................................................351
XL70 ................................................351
XL75 ................................................338
XL8 ..................................................351
XL9 ..................................................351
XN100 .............................................336
XN200 .............................................336
XN210 .............................................336
XNB101 ...........................................336
XNB103 ...........................................336
XNB103B .........................................336
XNB105 ...........................................336
XNB201 ...........................................336
XNB203 ...........................................336
XNB205 ...........................................336
XNS100 ...........................................336
XST100 ....................................349, 350
XST101 ............................348, 349, 350
XST102 ....................................349, 350
Order No. Page Order No. Page
Numerical Index
Order No. Page Order No. Page
www.labem.pl
392
ExplosionszeichnungenNotes
www.labem.pl
393393
www.labem.pl
394394
ExplosionszeichnungenNotes
www.labem.pl
GERMANY
Weller Tools GmbH
Carl-Benz-Straße 2
74354 Besigheim
Tel: +49 (0)7143 580-0
Fax: +49 (0)7143 580-108
GREAT BRITAIN
Apex Tool Group (UK Operations) Ltd
4th Floor Pennine House
Washington, Tyne & Wear
NE37 1LY
Tel: +44 (0) 191 419 7700
Fax: +44 (0) 191 417 9421
FRANCE
Apex Tool Group S.N.C.
25 Avenue Maurice Chevalier B.P. 46
77832 Ozoir-la-Ferrière Cedex
Tel: +33 (0) 1.64.43.22.00
Fax: +33 (0) 1.64.43.21.62
ITALY
Apex Tool S.r.l.
Viale Europa 80
20090 Cusago (MI)
Tel: +39 (02)9033101
Fax: +39 (02 )90394231
SWITZERLAND
Apex Tool Switzerland Sàrl
Rue de la Roselière 12
1400 Yverdon-les-Bains
Tel: +41 (0) 24 426 12 06
Fax: +41 (0) 24 425 09 77
CHINA
Apex Tool Group
A-8 Building
No. 38 Dongsheng Road
Heqing Industrial Park, Pudong
Shanghai 201201
Tel: +86 (21)60880288
Fax: +86 (21)60880289
USA
Apex Tool Group, LLC
1000 Lufkin Road
Apex, NC 27539-8160
Tel: +1 (800)476-3030 Ext.
Fax: +1 (800)387-2640
CANADA
Apex Tools – Canada
5925 McLaughlin Rd.
Mississauga, Ontario L5R 1B8
Tel: +1 (905) 501-4785
Fax: +1 (905) 501-4786
AUSTRALIA
Apex Tools Australia
P.O. Box 366
519 Nurigong Street
Albury, N.S.W. 2640
Tel: +61 (2)6058-0300
Fax: +61 (2)6021-7403
www.weller-tools.com
SoUTH EAST ASIA
Apex Power Tools India Pvt Ltd
Gala No. 1, Plot No. 5
S.No. 234, 235 & 245
India land Global Industrial Park.
(Next to Tata Johnson Control)
Taluka- Mulsi , Phase –I
Hinjawadi Pune (411057)
Maharashtra, India
toolsindia@apextoolgroup.com
©2013, Weller-Tools GmbH
T005 57 265 01 / 08.13 HOL 3.0
www.labem.pl
