DESCRIPTION (300 watt)
This TRANSIENT VOLTAGE SUPPRESSOR (TVS) array is packaged
in an SO-8 configuration giving protection to 7 Bidirectional data or
interface lines. It is designed for use in applications where protection
is required at the board level from voltage transients caused by
electrostatic discharge (ESD) as defined in IEC 1000-4-2, electrical
fast transients (EFT) per IEC 1000-4-4 and effects of secondary
lighting.
These TVS arrays have a peak power rating of 300 watts for an
8/20µsec pulse. This array is suitable for protection of sensitive circuitry consisting of TTL, CMOS
DRAM’s, SRAM’s, HCMOS, HSIC microprocessors, and I/O transceivers. The SMDAXXC-7 product
provides board level protection from static electricity and other induced voltage surges that can damage
sensitive circuitry.
FEATURES MECHANICAL
Protects up to 7 Bidirectional lines Molded SO-8 Surface Mount
Surge protection Per IEC 1000-4-2, IEC 1000-4-4 Weight: 0.066 grams (approximate)
SO-8 Packaging Marking: Logo, device number, date code
Pin #1 defined by DOT on top of package
MAXIMUM RATINGS PACKAGING
Operating Temperatures: -550C to +1500CTape & Reel EIA Standard 481-1-A
Storage Temperature: -550C to +1500C13 inch reel 2,500, pieces (OPTIONAL)
Peak Pulse Power: 300 Watts (8/20 µsec, Figure 1) Carrier tubes 95 pcs per (STANDARD)
Pulse Repetition Rate: <.01%
ELECTRICAL CHARACTERISTICS PER LINE @ 250C Unless otherwise specified
STAND
OFF
VOLTAGE
VWM
VOLTS
BREAKDOWN
VOLTAGE
VBR
@1 mA
VOLTS
CLAMPING
VOLTAGE
VC
@ 1 Amp
(FIGURE 2)
VOLTS
CLAMPING
VOLTAGE
VC
@ 5 Amp
(FIGURE 2)
VOLTS
LEAKAGE
CURRENT
ID
@ VWM
µA
CAPACITANCE
(f=1 MHz)
@0V
C
pF
TEMPERATURE
COEFFICIENT
OF VBR
áVBR
mV/°C
PART
NUMBER DEVICE
MARKING
MIN MAX MAX MAX TYP MAX
SMDA03C-7 SDL7 3.3 479200 300 -5
SMDA05C-7 SDB7 5.0 6.0 9.8 11 40 200 1
SMDA12C-7 SDD7 12.0 13.3 19 24 175 8
SMDA15C-7 SDF7 15.0 16.7 24 30 170 11
SMDA24C-7 SDH7 24.0 26.7 43 55 135 28
NOTE: TVS product is normally selected based on its stand off Voltage VWM. Product selected voltage
should be equal to or greater than the continuous peak operating voltage of the circuit to be protected.
Application: The SMDAXXC-7 product is designed for transient voltage suppression protection of ESD
sensitive components at the board level. It is an ideal product to be used for protection of I/O Transceivers.
SMDA03C-7
THRU
SMDA24C-7
TVSarray Series
www.mccsemi.com
omponents
21201 Itasca Street Chatsworth

 !"#
$% !"#
MCC
WAVE FORMS
FIGURE 1 FIGURE 2
Peak Pulse Power Vs Pulse Time Pulse Wave Form
MOUNTING PAD SO-8 CIRCUIT DIAGRAM
SO-8 PACKAGE
010 20 30
0
50
100
t -- Time in microsec
Ipp -- Peak Pulse Current -- % Ipp
Peak Value -- Ipp
Half-Value -- Ipp
2
8 X 20 Waveform
t
t
d
0.245
MIN
0.045±.005
.160±.005
.050 TYP
.030±.005
INCHES
MILLIMETERS
MAX
MIN
DIM
MAX
MIN
0.197
A
0.188
0.158
0.150
0.069
0.053
0.021
0.011
0.050
0.016
0.050 BSC
1.27 BSC
0.010
0.006
0.008
0.004
0.206
0.189
B
C
D
F
G
J
K
L
0.244
P
0.228
www.mccsemi.com
MCC
SMDA03C-7 thru SMDA24C-7