TC74VHC139FT(SPL) - TOSHIBA

TC74VHC139F/FT/FK

2012-02-29

TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic

TC74VHC139F,TC74VHC139FT,TC74VHC139FK

Dual 2-to-4 Line Decoder

The TC74VHC139 is an advanced high speed CMOS 2 to 4

LINE DECODER/DEMULTIPLEXER fabricated with silicon

gate C2MOS technology.

It achieves the high speed operation similar to equivalent

Bipolar Schottky TTL while maintaining the CMOS low power

dissipation.

The active low enable input can be used for gating or it can be

used as a data input for demultiplexing applications.

When the enable input is held High, all four outputs are fixed

at a high logic level independent of the other inputs.

An input protection circuit ensures that 0 to 5.5 V can be

applied to the input pins without regard to the supply voltage.

This device can be used to interface 5 V to 3 V systems and two

supply systems such as battery back up. This circuit prevents

device destruction due to mismatched supply and input voltages.

Features

• High speed: tpd = 5.0 ns (typ.) at VCC = 5 V

• Low power dissipation: ICC = 4 μA (max) at Ta = 25°C

• High noise immunity: VNIH = VNIL = 28% VCC (min)

• Power down protection is provided on all inputs.

• Balanced propagation delays: tpLH ≈ tpHL

• Wide operating voltage range: VCC (opr) = 2 V to 5.5 V

• Pin and function compatible with 74ALS139

Pin Assignment

TC74VHC139F

TC74VHC139FT

TC74VHC139FK

Weight

SOP16-P-300-1.27A : 0.18 g (typ.)

TSSOP16-P-0044-0.65A : 0.06 g (typ.)

VSSOP16-P-0030-0.50 : 0.02 g (typ.)

(top view)

VCC 16

GND 8 9

0Y1

1Y1

2Y1

3Y1

0Y2

1Y2

2Y2

3Y2

TC74VHC139F/FT/FK

2012-02-29

IEC Logic Symbol

Truth Table

Inputs Outputs

Enable Select

G B A

0Y 1Y 2Y 3Y

Selected

Output

H X X H H H H None

L L L L H H H 0Y

L L H H L H H 1Y

L H L H H L H 2Y

L H H H H H L 3Y

X: Don’t care

System Diagram

Absolute Maximum Ratings (Note)

Characteristics Symbol Rating Unit

Supply voltage range VCC −0.5 to 7.0 V

DC input voltage VIN −0.5 to 7.0 V

DC output voltage VOUT −0.5 to VCC + 0.5 V

Input diode current IIK −20 mA

Output diode current IOK ±20 mA

DC output current IOUT ±25 mA

DC VCC/ground current ICC ±75 mA

Power dissipation PD 180 mW

Storage temperature Tstg −65 to 150 °C

Note: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or

even destruction.

Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the

significant change in temperature, etc.) may cause this product to decrease in the reliability significantly

even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute

maximum ratings and the operating ranges.

Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook

(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test

report and estimated failure rate, etc).

(10)

(5)

X/Y (4)

(7)

(6)

(11)

(12)

0Y1

(9)

1Y1

2Y1

3Y1

0Y2

1Y2

2Y2

3Y2

(3)

(2)

(1)

(13)

(14)

(15)

(10)

(5)

DMUX (4)

(7)

(6)

(11)

(12)

0Y1

1 3

(9)

1Y1

2Y1

3Y1

0Y2

1Y2

2Y2

3Y2

(3)

(2)

(1)

(13)

(14)

(15)

2/14

3/13

1/15

4/12

5/11

6/10

7/9

TC74VHC139F/FT/FK

2012-02-29

Operating Ranges (Note)

Characteristics Symbol Rating Unit

Supply voltage VCC 2.0 to 5.5 V

Input voltage VIN 0 to 5.5 V

Output voltage VOUT 0 to VCC V

Operating temperature Topr −40 to 85 °C

Input rise and fall time dt/dv 0 to 100 (VCC = 3.3 ± 0.3 V)

0 to 20 (VCC = 5 ± 0.5 V) ns/V

Note: The operating ranges must be maintained to ensure the normal operation of the device.

Unused inputs must be tied to either VCC or GND.

Electrical Characteristics

DC Characteristics

Ta = 25°C Ta = −40 to 85°C

Characteristics Symbol Test Condition VCC

(V) Min Typ. Max Min Max Unit

2.0 1.50 ― ― 1.50 ―

High-level input

voltage VIH ― 3.0

5.5

VCC ×

0.7 ― ― VCC ×

0.7 ―

2.0 ― ― 0.50 ― 0.50

Low-level input

voltage VIL ― 3.0

5.5

― ― VCC ×

0.3 ― VCC ×

0.3

IOH = −50 μA

2.0

3.0

4.5

1.9

2.9

4.4

2.0

3.0

4.5

―

1.9

2.9

4.4

―

High-level output

voltage VOH V

IN = VIH or VIL

IOH = −4 mA

IOH = −8 mA

3.0

4.5

2.58

3.94

―

2.48

3.80

―

IOL = 50 μA

2.0

3.0

4.5

―

0.0

0.1

―

0.1

Low-level output

voltage VOL V

IN = VIH or VIL

IOL = 4 mA

IOL = 8 mA

3.0

4.5

―

0.36

―

0.44

Input leakage

current IIN VIN = 5.5 V or GND 0 to

5.5 ― ― ±0.1 ― ±1.0 μA

Quiescent supply

current ICC VIN = VCC or GND 5.5 ― ― 4.0 ― 40.0 μA

TC74VHC139F/FT/FK

2012-02-29

AC Characteristics (input: tr = tf = 3 ns)

Test Condition Ta = 25°C Ta = −40 to 85°C

Characteristics Symbol

VCC (V) CL (pF) Min Typ. Max Min Max

Unit

15 ― 7.2 11.0 1.0 13.0

3.3 ± 0.3

50 ― 9.7 14.5 1.0 16.5

15 ― 5.0 7.2 1.0 8.5

Propagation delay

time

(A, B-Y)

tpLH

tpHL

―

5.0 ± 0.5

50 ― 6.5 9.2 1.0 10.5

15 ― 6.4 9.2 1.0 11.0

3.3 ± 0.3

50 ― 8.9 12.7 1.0 14.5

15 ― 4.4 6.3 1.0 7.5

Propagation delay

time

(G-Y)

tpLH

tpHL

―

5.0 ± 0.5

50 ― 5.9 8.3 1.0 9.5

Input capacitance CIN ― ― 4 10 ― 10 pF

Power dissipation

capacitance CPD (Note) ― 26 ― ― ― pF

Note: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating

current consumption without load.

Average operating current can be obtained by the equation:

ICC (opr) = CPD·VCC·fIN + ICC/2 (per decoder)

Input Equivalent Circuit

INPUT

TC74VHC139F/FT/FK

2012-02-29

Package Dimensions

Weight: 0.18 g (typ.)

TC74VHC139F/FT/FK

2012-02-29

Package Dimensions

Weight: 0.06 g (typ.)

TC74VHC139F/FT/FK

2012-02-29

Package Dimensions

Weight: 0.02 g (typ.)

TC74VHC139F/FT/FK

2012-02-29

RESTRICTIONS ON PRODUCT USE

• Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information

in this document, and related hardware, software and systems (collectively "Product") without notice.

• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with

TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.

• Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are

responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and

systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily

injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the

Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of

all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes

for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the

instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their

own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such

design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,

diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating

parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR

APPLICATIONS.

• PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE

EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH

MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT

("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without

limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for

automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions,

safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE

PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your

TOSHIBA sales representative.

• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.

• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any

applicable laws or regulations.

• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any

infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to

any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.

• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE

FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY

WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR

LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND

LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO

SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.

• Do not use or otherwise make available Product or related software or technology for any military purposes, including without

limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile

technology products (mass destruction weapons). Product and related software and technology may be controlled under the

applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the

U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited

except in compliance with all applicable export laws and regulations.

• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.

Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,

including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES

OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.