Datasheet for part number CA3101F14SA7PB Our Catalog Part Number: CA3101F14SA7P-B Brand: Cannon Product Category: Circular Product Line: CA Bayonet Series: CA BAYONET Product Datasheet Bayonet Shell Style Endbell Style Gender Shell Size Contact Arrangement Number of contacts Contact Type Contact Plating Shielding Contact Rating at +20 C (68 F) (Size 15/15S/16/16S) Contact Resistance (Size 15/15S/16/16S) Operating Voltage Insulator Resistance Test Voltage Air and Creepage Paths (Min) Ambient Temperature Safety Provisions Salt Spray Resistance Mating Cycles Sep. Force per Contact (Size 15/15S/16/16S) Gage Coupling Torque Contact Retention (Size 15/15S/16/16S) Shell Material Shell Plating Insulator and Gromet Material Contact Material Connector with bayonet coupling Cable connecting plug Endbell for flex tube Pin 14S 14SA7 7 contacts size 16S Solder Cup Hard silver no 22 A 6 m In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC 60364-4-41. Acc. To VG95319, part 2, test no. 5.12 and VG95210, part 32, test conditions B, standard insulator material > 1000 M 1050 Vrms 0,7 mm Standard insulator material -55/+125C (-67/257F) IP67 acc. to DIN 40 050 (1 bar pressure after 12 hrs) 500 hours salt spray resistant 500 min 1,0 N For infos on Gage please see catalog VG95234, part 1 Closing: 3,6 Nm max / Opening: 0,35 Nm min 35 N Aluminium alloy Olive drab chromate over cadmium plating CR-Elastomere Copper alloy Harnessing Info: Contact Cross-Section See assembly instruction Harnessing Info: Insulator Diameter See assembly instruction Wire Stripping (Size 15/15S/16/16S) 6,2 mm General Info All tests in accordance with VG95319 and/or if applicable with VG95210 Specifications and dimensions subject to change. Page 1 of 1