LITE-ON SEMICONDUCTOR STPF1020CTN REVERSE VOLTAGE - 200 Volts FORWARD CURRENT - 10 Amperes SUPER FAST GLASS PASSIVATED RECTIFIERS ITO-220AB FEATURES B M K DIM. D PIN 2 3 E 1 J F G MECHANICAL DATA I Case : ITO-220AB molded plastic Polarity : As marked on the body Weight : 0.06 ounces, 1.70 grams Mounting position : Any Max. mounting torque = 0.5 N.m (5.1 Kgf.cm) ITO-220AB MIN. MAX. A B C 15.50 10.0 3.00 16.50 10.40 3.50 D E F 9.00 2.90 13.46 G H 1.15 2.40 9.30 3.60 14.22 1.70 A C Glass passivated chip Superfast switching time for high efficiency Low forward voltage drop and high current capability Low reverse leakage current High surge capacity Plastic package has UL flammability classification 94V-0 H N H L PIN 1 PIN 2 CASE PIN 3 2.70 0.50 0.70 0.45 0.70 3.00 3.30 L 4.36 4.77 M 2.48 2.80 2.80 2.50 N All Dimensions in millimeter I J K MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. SYMBOL STPF1020CTN UNIT VRRM VRMS VDC 200 140 200 V V V @TC=125 I(AV) 10 A @TJ=25 IFSM 55 A 1.1 1.0 1.25 1.20 V IR 10 250 uA CJ 60 pF TRR 30 ns R JC 4.0 /W TJ,TSTG -55 to +150 Vdis 2000 V CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current Non Repetitive Peak Forward Surge Current Per Diode TP=8.3ms IF=5A@TJ =25 Maximum forward Voltage IF=5A@TJ =125 Pulse Width =300us IF=10A@TJ =25 Duty cycle IF=10A@TJ =125 Maximum DC Reverse Current at Rated DC Blocking Voltage @TJ =25 @TJ =100 Typical Junction Capacitance per element (Note 1) Maximum Reverse Recovery Time (Note 2) Typical Thermal Resistance (Note 3) Operating and Storage Temperature Range Dielectric Strengh from terminals to case, AC with t=1 minute, RH<30% VF NOTES : 1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2.Reverse Recovery Test Conditions:IF=0.5A,IR=1.0A,IRR 0.25A. 3. Device mounted on 100 mm x 100 mm x 1.6 mm Cu Plate Heatsink. REV. 2, Sep-2010, KTGC24 RATING AND CHARACTERISTIC CURVES STPF1020CTN FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT AMPERES FIG.1 - FORWARD CURRENT DERATING CURVE 12 10 8 6 4 2 0 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 25 50 75 100 125 150 60 50 40 30 20 10 Pulse Width 8.3ms Single Half-Sine-Wave 0 1 175 2 CASE TEMPERATURE , C 20 10 50 100 NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL REVERSE CHARACTERISTICS FIG.4 - TYPICAL FORWARD CHARACTERISTICS 100.0 200 180 PERCENT OF FORWARD CURRENT ,(%) TJ = 125 C 10.0 TJ = 100 C 1.0 TJ = 25 C 0.1 0.01 .001 0 20 60 140 120 100 80 60 40 20 0 140 100 160 0 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 0.2 0.4 0.6 FIG.5 - TYPICAL JUNCTION CAPACITANCE 100 TJ = 25 C, f= 1MHz 10 0.1 1 0.8 1 1.2 1.4 1.6 VF , INSTANTANEOUS FORWARD VOLTAGE (V) 1000 CAPACITANCE , (pF) INSTANTANEOUS REVERSE CURRENT ,(uA) 5 4 10 REVERSE VOLTAGE , VOLTS 100 1.8 Legal Disclaimer Notice STPF1020CTN Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.