4 3 2 1 NOTES 1. DIMENSIONS ARE IN MILLIMETERS. 3MTM TWIN AXIAL CABLE, SL8800 SERIES 2. PHYSICAL: COLOR: SILVER MARKING: 3M (part number) 30 AWG (signal plating) [VW1] (lot code) EXAMPLE: 3M SL8802/04-5ODN5-00 30 AWG SILVER TW602-1 D D EXAMPLE VW1: 3M SL8802/04-5FDN5-00 30 AWG SILVER VW1 TW602-1 3. REGULATORY INFORMATION: ROHS COMPLIANT. SEE THE REGULATORY INFORMATION APPENDIX (RIA) IN THE "ROHS COMPLIANCE" SECTION OF WWW.3MCONNECTORS.COM FOR COMPLIANCE INFORMATION (RIA E1 & C1 APPLY) 6.75 THIS CABLE CONSTRUCTION HAS A THIN ALUMINUM LAYER AT EACH EDGE. USER SHOULD EVALUATE ITS USE IN THEIR APPLICATION AND, IF NECESSARY, INSULATING TAPE MAY BE APPLIED TO COVER THE ALUMINUM LAYER, AS USER DEEMS APPROPRIATE. C 0.038 0.79 2 PLACES C B SIGNAL WIRES: 30 AWG SOLID ( 0.254 [.0100]) SILVER OR TIN PLATED COPPER 0.787 [.0310] POLYOLEFIN INSULATION 4 PLACES 6. UNLESS OTHERWISE NOTED, REFERENCES TO INDUSTRY SPECIFICATIONS ARE INTENDED TO INDICATE SUBSTANTIAL COMPLIANCE TO THE MATERIAL ELEMENTS OF THE SPECIFICATION. SUCH REFERENCES SHOULD NOT BE CONSTRUED AS A GUARANTEE OF COMPLIANCE TO ALL REQUIREMENTS IN A GIVEN SPECIFICATION. GROUND WIRES: 30 AWG SOLID ( 0.254 [.0100]) TIN PLATED COPPER 2 PLACES C DENOTES CRITICAL DIMENSION. 7. D 79896 AUG 07,2018 LDS MML ADDED CRITICAL DIM SYMBOLS ADDED NOTE 7 REVISED TOLERANCE 1 HORIZONTAL FLAME VERSION SIGNAL WIRE PLATING A SILVER VW1 VERSION SL8802/04-50DN5-00 DESIGN REFERENCE NEXT ASSEMBLY ACCESS CODES SL8802/04-5FDN5-00 DIVISION TIN SL8802/04-51DN5-00 PRODUCT SPEC. IMPEDANCE SPEC. PS-0105 100 SL8802/04-5GDN5-00 PS-0163 5 OHMS 95 DO NOT SCALE DRAWING SCALE 25 1 5 OHMS MAX SURFACE ROUGHNESS 125 ALL SURFACES MARKED ONLY 3 ECO ISSUE DATE AND DESCRIPTION DRFT DATE ARM MAR 07,2011 CHKD DATE M LETTNAG JAN 24,2012 C 3M Center INTERPRET PER ASME Y14.5 - 2009 4 REV DIVISION CODE THIRD ANGLE PROJECTION Visit http://www.3mconnectors.com D REVISION 5. FOIL AND INSULATOR STRIPPING BLADE DESIGN DRAWINGS ARE AVAILABLE UPON REQUEST. TOOLING REFERENCE NUMBER: NU14A1 2 St. Paul, TOLERANCES EXCEPT AS NOTED INCHES .0 .00 .000 .0000 MILLIMETERS 0 2 .0 .5 .00 .10 .000 .005 ANGLES 1 MN 55144 DRFT MFG DATE APPVL DATE CHKD 3M COPYRIGHT 2018 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE SL8802/04-5XDN5-00, 100 OHM, 30 AWG, 2PR CAGE SIZE NUMBER MODEL DRAWING NO. REV. 78-5100-2400-9 DET. LISTS 1 YES NO D SHT 1 OF 2 Imaged: Central Standard Time 8/7/2018 -- UTC Offset (hrs) 6 0.874 DRAWING NUMBER 1.80 C 78-5100-2400-9 C 4. THE OUTER SURFACE OF THE RIBBON CABLE HAS A METALLIC APPEARANCE, BUT IS NOT CONDUCTIVE. THERE IS A TRANSLUCENT POLYESTER OUTER LAYER OVER AN ALUMINUM SHIELDING LAYER, WHICH GIVES THIS APPEARANCE. 3.52 1.72 +0.25 0.75 -0.00 1 2 PLACES UL FILE NUMBER: E42769 B A 4 3 2 1 D D Regulatory: For regulatory information about this product, visit 3M.com/regs or contact your 3M representative. Technical Information: The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. D C 78-5100-2400-9 C REVISION Product Use: Many factors beyond 3M's control and uniquely within user's control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user's method of application. DRAWING NUMBER Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OR TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M's option, replacement of the 3M product or refund of the purchase price. 3M Electronics Materials Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 1-800-225-5373 www.3M.com/interconnect B B D 79896 AUG 07,2018 LDS MML ADDED CRITICAL DIM SYMBOLS ADDED NOTE 7 REVISED TOLERANCE 1 DESIGN REFERENCE NEXT ASSEMBLY ACCESS CODES DIVISION REV ECO ISSUE DATE AND DESCRIPTION DRFT DATE ARM MAR 07,2011 CHKD DATE M LETTNAG JAN 24,2012 DIVISION CODE C 3M Center DO NOT SCALE DRAWING A SCALE 1 1 THIRD ANGLE PROJECTION INTERPRET PER ASME Y14.5 - 2009 MAX SURFACE ROUGHNESS 125 ALL SURFACES MARKED ONLY 4 3 Imaged: Central Standard Time 8/7/2018 -- UTC Offset (hrs) 6 Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. 2 St. Paul, TOLERANCES EXCEPT AS NOTED INCHES .0 .00 .000 .0000 MILLIMETERS 0 2 .0 .5 .00 .10 .000 .005 ANGLES 1 MN 55144 DRFT MFG DATE APPVL DATE CHKD 3M COPYRIGHT 2018 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE SL8802/04-5XDN5-00, 100 OHM, 30 AWG, 2PR CAGE SIZE NUMBER MODEL DRAWING NO. REV. 78-5100-2400-9 DET. LISTS 1 YES NO D SHT 2 OF 2 A