OP07C, OP07D PRECISION OPERATIONAL AMPLIFIERS SLOS099D - OCTOBER 1983 - REVISED FEBRUARY 2002 D D D D D D D OP07C . . . D OR P PACKAGE OP07D . . . D, P, OR PS PACKAGE (TOP VIEW) Low Noise No External Components Required Replace Chopper Amplifiers at a Lower Cost Wide Input-Voltage Range . . . 0 to 14 V Typ Wide Supply-Voltage Range . . . 3 V to 18 V Essentially Equivalent to Fairchild A714 Operational Amplifiers Direct Replacements for PMI OP07C and OP07D OFFSET N1 IN- IN+ VCC- 1 8 2 7 3 6 4 5 OFFSET N2 VCC+ OUT NC NC - No internal connection description These devices offer low offset and long-term stability by means of a low-noise, chopperless, bipolar-input-transistor amplifier circuit. For most applications, external components are not required for offset nulling and frequency compensation. The true differential input, with a wide input-voltage range and outstanding common-mode rejection, provides maximum flexibility and performance in high-noise environments and in noninverting applications. Low bias currents and extremely high input impedances are maintained over the entire temperature range. The OP07 is unsurpassed for low-noise, high-accuracy amplification of very-low-level signals. These devices are characterized for operation from 0C to 70C. AVAILABLE OPTIONS TA VIO MAX AT 25C 0C to 70C 150 V PACKAGE SMALL OUTLINE (D, PS) PLASTIC DIP (P) OP07CD OP07CP OP07DD OP07DPS OP07DP The D package is available taped and reeled. Add the suffix R to the device type (e.g., OP07CDR). The PS package is available only taped and reeled. symbol OFFSET N1 IN+ IN- OFFSET N2 1 3 2 + 6 OUT - 8 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 2002, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 OP07C, OP07D PRECISION OPERATIONAL AMPLIFIERS SLOS099D - OCTOBER 1983 - REVISED FEBRUARY 2002 schematic 7 OFFSET N1 OFFSET N2 8 6 IN+ VCC+ 1 OUT 3 2 IN- COMPONENT COUNT Resistors Transistors Capacitors 28 39 4 4 V CC- absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage: VCC+ (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 V VCC- (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -22 V Differential input voltage (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 V Input voltage, VI (either input, see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 V Duration of output short circuit (see Note 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unlimited Package thermal impedance, JA (see Note 5): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97C/W P package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85C/W PS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95C/W Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65C to 150C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, unless otherwise noted, are with respect to the midpoint between VCC+ and VCC- . 2. Differential voltages are at IN+ with respect to IN-. 3. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less. 4. The output may be shorted to ground or either power supply. 5. The package thermal impedance is calculated in accordance with JESD 51-7. recommended operating conditions VCC VIC Supply voltage TA Operating free-air temperature 2 VCC = 15 V Common-mode input voltage POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 MIN MAX UNIT 3 18 V -13 13 V 0 70 C electrical characteristics at specified free-air temperature, VCC = 15 V (unless otherwise noted) PARAMETER TEST CONDITIONS VIO Input offset voltage VO = 0 0, RS = 50 a V IO Temperature coefficient of input offset voltage VO = 0, RS = 50 Long-term drift of input offset voltage See Note 6 Offset adjustment range RS = 20 k, IIO Input offset current a IIO Temperature coefficient of input offset current Input bias current a IIB Temperature coefficient of input bias current VICR MAX 25C 60 0C to 70C 0C to 70C See Figure 1 MAX 150 60 150 85 250 85 250 0.5 1.8 0.7 2.5 4 0.8 6 0.8 RL 2 k 4 6 0C to 70C 1.6 8 1.6 8 12 50 12 50 1.8 7 2 12 0C to 70C 2.2 9 3 14 18 50 18 50 13 14 13 14 0C to 70C 13 13.5 13 13.5 25C 12 13 12 13 11.5 12.8 11.5 12.8 RL 1 k 12 VCC = 3 V, RL 500 k VO = 0.5 V, VO = 10 V, V RL = 2 k 11 12.6 11 25C 100 400 25C 120 400 120 400 nA pA/C nA pA/C V V 12 0C to 70C V/C mV 25C 25C V V/mo 0.5 25C 0C to 70C UNIT 12.6 400 V/ V V/mV 0C to 70C 100 400 100 400 Unity-gain bandwidth 25C 0.4 0.6 0.4 0.6 MHz Input resistance 25C 8 33 7 31 M 25C 100 120 94 110 0C to 70C 97 120 94 106 CMRR Common mode rejection ratio Common-mode V VIC = 13 V, RS = 50 kSVS Supply voltage sensitivity (VIO/VCC) Supply-voltage VCC = 3 V to 18 V,, RS = 50 PD Power dissipation VO = 0, VCC = 3 V, No load 25C 7 32 7 32 0C to 70C 10 51 10 51 80 150 80 150 4 8 4 8 No load VO = 0, dB 25C V/V mW All characteristics are measured under open-loop conditions with zero common-mode input voltage, unless otherwise noted. NOTE 6: Since long-term drift cannot be measured on the individual devices prior to shipment, this specification is not intended to be a warranty. It is an engineering estimate of the averaged trend line of drift versus time over extended periods after the first thirty days of operation. 3 OP07C, OP07D PRECISION OPERATIONAL AMPLIFIERS B1 ri L i l differential diff ti l voltage lt lifi ti Large-signal amplification TYP 25C 0C to 70C RL 2 k AVD MIN 0.4 Common mode input voltge range Common-mode Peak output voltage OP07D TYP RL 10 k VOM OP07C MIN SLOS099D - OCTOBER 1983 - REVISED FEBRUARY 2002 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 IIB TA OP07C, OP07D PRECISION OPERATIONAL AMPLIFIERS SLOS099D - OCTOBER 1983 - REVISED FEBRUARY 2002 operating characteristics, VCC = 15 V, TA = 25C Vn OP07C OP07D TYP TYP f = 10 Hz 10.5 10.5 f = 100 Hz 10.2 10.3 9.8 9.8 f = 0.1 Hz to 10 Hz 0.38 0.38 f = 10 Hz 0.35 0.35 f = 100 Hz 0.15 0.15 f = 1 kHz 0.13 0.13 15 15 TEST CONDITIONS PARAMETER Equivalent input noise voltage f = 1 kHz VN(PP) In IN(PP) Peak-to-peak equivalent input noise voltage Equivalent input noise current Peak-to-peak equivalent input noise current f = 0.1 Hz to 10 Hz SR Slew rate RL 2 k 0.3 0.3 All characteristics are measured under open-loop conditions with zero common-mode input voltage, unless otherwise noted. APPLICATION INFORMATION 20 k VCC+ OFFSET N1 1 IN+ IN- 3 2 OFFSET N2 8 + 7 6 OUT - 4 VCC- Figure 1. Input Offset-Voltage Null Circuit 4 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 UNIT nV/Hz V pA/Hz pA V/s IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2002, Texas Instruments Incorporated