Scotchlok™Terminals
MU18-10FHT, MU14-10FHT, thru MU10-10FHT
Standard Fork, High Temperature, Butted Seam
Data Sheet
Specifications
Wire Size: See Table Above
Barrel Seam: Butted
Max. Continuous Temp: 900˚F (482˚C)
Max. Current: Same as Wire
Terminal Material: Steel
Terminal Plating: Nickel
Installation Information
Strip away the end 3/8 inch of wire insulation.
Make the crimp in the proper station of a recommended
3M crimp tool: TH-440, TH-450 (scissor style), or TR-490
(ratchet style) hand tools.
Barrel Crimp (Electrical)
W
L
EC
tcudorP rebmuN
eriW egnaR )GWA( dutS eziSWCLE ssenkcihT lerraB htgneL lerraB .D.I
THF01-81UM81-220143.092.007.045.0030.052.0070.0
THF01-41UM41-610143.092.007.045.0030.052.0090.0
THF01-01UM01-210183.082.037.035.0040.052.0531.0
WARNING
Turn power off before installing or removing terminal. All electrical
work should be done according to appropriate electr ical codes.
Electrical Products Division
6801 River Place Blvd.
Austin, TX 78726-9000
http://www.3M.com/elpd Litho in USA.
© 3M 2002 78-8126-0482-1-A
IMPORTANT NOTICE
Before using this product, you must evaluate it and deter mine if it is suitable for your intended application. You assume all risks and liability
associated with such use.
Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase.
3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty per iod stated above, your exclusive remedy shall be,
at 3M’s option, to replace or repair the 3M product or refund the purchase pr ice of the 3M product. Except where prohibited by law, 3M will
not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential
regardless of the legal theory asserted.
3M and Scotchlok are trademarks of 3M
Engineering Specification
Crimp-type terminals shall, electrically and
mechanically, connect to a pre-stripped end of a
stranded copper wire: and have a flat tongue portion
with a central opening for mounting around a screw or
stud.
The non-insulated, butted seam high-temperature
standard fork terminal shall be nickel-plated, annealed
steel, with the tongue having a specified stud slot (size
10) and with a 0.250˝ long butted seam barrel having a
beveled I.D. for ease of stranded wire entry, sized for a
specified (AWG) wire range (22-18, 16-14, 12-10).
