© Coilcraft, Inc. 2009
Specifications subject to change without notice.
Please check our website for latest information.
Chip Inductors
–
0805HS Series (2012)
Document 159-1
Document 159-1 Revised 09/21/07
Inductance2Percent SRF min5DCR max6Irms7Color
Part number1(nH) tolerance3Q min4(MHz) (Ohms) (mA) code
0805HS-030TJL_ 3.3 @ 250 MHz 550 @ 1500 MHz 7900 0.08 600 Black
0805HS-060TJL_ 6.8 @ 250 MHz 550 @ 1000 MHz 5500 0.11 600 Brown
0805HS-080TJL_ 8.2 @ 250 MHz 550 @ 1000 MHz 4700 0.12 600 Red
0805HS-100TJL_ 10 @ 250 MHz 560 @ 500 MHz 4200 0.10 600 Blue
0805HS-120TJL_ 12 @ 250 MHz 550 @ 500 MHz 4000 0.15 600 Orange
0805HS-150TJL_ 15 @ 250 MHz 550 @ 500 MHz 3400 0.17 600 Yellow
0805HS-180TJL_ 18 @ 250 MHz 550 @ 500 MHz 3300 0.20 600 Green
0805HS-220T_L_ 22 @ 250 MHz 5,2 55 @ 500 MHz 2600 0.22 500 Blue
0805HS-270T_L_ 27 @ 250 MHz 5,2 55 @ 500 MHz 2500 0.25 500 Violet
0805HS-330T_L_ 33 @ 250 MHz 5,2 60 @ 500 MHz 2050 0.27 500 Gray
0805HS-390T_L_ 39 @ 250 MHz 5,2 60 @ 500 MHz 2000 0.29 500 White
0805HS-470T_L_ 47 @ 200 MHz 5,2 60 @ 500 MHz 1650 0.31 500 Black
0805HS-560T_L_ 56 @ 200 MHz 5,2,1 60 @ 500 MHz 1550 0.34 500 Brown
0805HS-680T_L_ 68 @ 200 MHz 5,2,1 60 @ 500 MHz 1450 0.38 500 Red
0805HS-820T_L_ 82 @ 150 MHz 5,2,1 65 @ 500 MHz 1300 0.42 400 Orange
0805HS-101T_L_ 100 @ 150 MHz 5,2,1 65 @ 500 MHz 1200 0.46 400 Yellow
0805HS-121T_L_ 120 @ 150 MHz 5,2,1 50 @ 250 MHz 1100 0.51 400 Green
0805HS-151T_L_ 150 @ 100 MHz 5,2,1 50 @ 250 MHz 920 0.56 400 Blue
0805HS-181T_L_ 180 @ 100 MHz 5,2,1 50 @ 250 MHz 870 0.64 400 Violet
0805HS-221T_L_ 220 @ 100 MHz 5,2 50 @ 250 MHz 850 0.70 400 Gray
1. When ordering, specify tolerance, termination and packaging codes:
0805HS-221TJLC
Tolerance: F =1% G = 2% J = 5%
(Table shows stock tolerances in bold.)
Termination: L = RoHS compliant silver-palladium-platinum-glass frit.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
Packaging: C =7″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B= Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D=13″ machine-ready reel. EIA-481 embossed plastic
tape (7500 parts per full reel).
2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP
4286A impedance analyzer with Coilcraft-provided correlation pieces.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test
fixture.
5. SRF measured using an Agilent/HP 8720D network analyzer and a
Coilcraft SMD-D test fixture.
6. DCR measured on a Cambridge Technology micro-ohmmeter and a
Coilcraft CCF858 test fixture.
7. Current that causes a 15°C temperature rise from 25°C ambient.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Ceramic body and wire wound construction provide highest
SRFs available in 0805 size. These ultra-compact inductors
provide exceptional Q values, even at high frequencies.
Free evaluation samples are available by contacting
Coilcraft or ordering them on-line at www.coilcraft.com.
Core material Ceramic
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 9.8 – 10.9 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+100°C with derated current
Storage temperature Component: –40°C to +100°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Mean Time Between Failures (MTBF) 1 billion hours
Packaging 2000/7″ reel; 750/13″ reel Paper tape: 8 mm wide,
0.23 mm thick, 4 mm pocket spacing, 1.3 mm pocket depth
PCB washing Only pure water or alcohol recommended