THE INFORMATION CONTAINED HEREIN IS CONSIDERED PROPRIETARY TO BEL FUSE INC. AND SHALL NOT BE COPIED, REPRODUCED OR DISCLOSED WITHOUT THE WRITTEN APPROVAL OF BEL FUSE INC, LED POLARITY PIN 11 | PIN 12 CULUR O 2002/95/EC - + GREEN + - ORANGE LED ELECTRICAL CHARACTERISTICS @ 25C 11 NN Tn GREEN SCHEMATIC TURNS RATIO 1CT | 1CT +24 12 ~ RU45 OCL @ 0.1V, 100KHz ier ict 8mA DC BIAS 350uH MIN. RD+ 9 ++ 1 RX+ INSERTION LOSS Yk D 100KHz TO 100MHz -15 dB MAX. CT 10 YY IE RETURN LOSS MIN.? rep- g -L-bor, 4, > RX- 2MHz-30MHz -16 oB MIN. icT ict 60MHz-80MHz -10 oB MIN, TD+ 7 > 3. TX+ D.C, RESISTANCE PP tat big 4 (9-8)=(7-6) 1.40 OHM MAX, | ARR IE _ (RJ1-RU2)=(RJ3-RI6> 1.0 OHM MAX, ; TD- 6 ) 55 6 TX- INTERWINDING CAPACITANCE PER CHANNEL PRI. to SEC. 40 pF MAX. CROSSTALK | 100KHz TO 100MHz -30 oB MIN. VCle 3 > 7 HIPOT (Isolation Voltage: 2250 VDC VC36 2 8 100% OF PRODUCTION TESTED TO COMPLY WITH IEEE 802.3 ISOLATION REQUIREMENTS. LED VF (FORWARD VOLTAGE) IF=20mA GREEN 22V TYP, 4X 15nF 100V. ORANGE 2,0V TYP, AD CDOMINANT WAVELENGTH) IF=20mA GREEN 565nm TYP. 4X 73 OHMS ORANGE 610nm TYP. BALANCED DC LINE CURRENT 350 mA MAX, @ 57 VDC CONTINUOUS 1000pF 2kV = 500 mA MAX. @ 57 VDC FOR 200 MILLISECONDS SHIELD 77/7 ORIGINATED BY DATE TITLE PART NO. / DRAWING NO. STANDARD DIM. [ ] METRIC DIM. AS REFERENCE 2X4 10/100 MagJack CHOW WANGCHUNG 04-17-09 PoE) WITH LED 08642X4R5S-F 2O INCH | on: cH [mma] bel DRAWN BY DATE 0864-2X4R-55-F FILE NAME x SCALE: N/A componnrsa LEE WEIDE 04-17-09 PATENTED 08642X4R55-F _A.DWG "XxX 6 - == nian DC002(2)032305 This document is electronically generated. This is a controlled copy if used internallyTHE INFORMATION CONTAINED HEREIN IS CONSIDERED PROPRIETARY* TO BEL FUSE INC. AND SHALL NOT BE COPIED, REPRODUCED OR DISCLOSED WITHOUT THE RoHS 2002/95/EC WRITTEN APPROVAL OF BEL FUSE INC. 1 uo 5 ban oO ~ c 2 in A HH rf < Ino CU 4 ox < ___ 2.330 [59.18] __ > 4 S45 1,320 [33,53] 8 PORT 2 | LED FOR naz os 7] MAX. { UPPER PORT at 1S LED FOR PORT 8 a7 ue t LOWER PORT Oo 5 m rm q nS oe BR ay Sr 5% se W 4 d A RU45 1~ TT t PORT 1 0.425 [10.80] < 0,05540,020 [1.40+0,511 l__ 0,235 [5,97] NOTES: = 2,100 [53.34] = PLASTIC HOUSING: THERMOPLASTIC PBT FLAMMABILITY RATING UL 94V-0 CUNTACT PLATING: SO MICRO-INCH HARD GOLD PLATING OUTPUT PINS: TIN-COATED COPPER WIRE, DIA 0,018 INCH. METAL SHIELD: NICKEL PLATED ON COPPER ALLOY. CALL GROUND LEADS ARE SULDER DIPPED) [1] JACK CAVITY CONFORMS TO FCC RULES AND REGULATIONS, PART 68 SUBPART F. MARK PART WITH MFG LOGO, MFG NAME, PART NUMBER, DATE CODE AND PATENTED. cWllus UL RECOGNIZED - FILE #196366 AND E169987. | RoHS COMPLIANCE, PER EU DIRECTIVE 2002/95/EC, 0,590 [13.97] TYPICAL THE PRODUCT IS PATENTED, THE PATENT NUMBER IS U.S, PAT. 5,736,910, ORIGINATED BY DATE TITLE PART NO. / DRAWING NO. STANDARD DIM. [ ] METRIC DIM. AS REFERENCE 2X4 10/100 MagJack LIU QIN 04-17-09 PoE; WITH TED 08642X4R55-F TOL. IN INCH__|Uyir ; INCH [mm]|REV.: A bel DRAWN BY DATE 0864-2X4R-55-F FILE NAME = SCALE: N/A [SIZE : At | comommmdd, XIAN JIAXIN 04-17-09 PATENTED 08642X4R55-F_ADWG [xxx 1 a0010 @--==j _[race: 3 | RO DC002(2)032305 This document is electronically generated. This is a controlled copy if used internallyTHE INFORMATION CONTAINED HEREIN IS CONSIDERED PROPRIETARY TO BEL FUSE INC. AND SHALL NOT BE COPIED, REPRODUCED OR DISCLOSED WITHOUT THE WRITTEN APPROVAL OF BEL FUSE INC. 110 12 O g 70 oO 352 O O O10 10 oO O Oo Oo 08|80 5 06 GO 20 LOWER UPPER DECK aN f- DECK O11 12 PIN-OUT INF URMATION (COMPONENT SIDE VIEW) PORT ASSIGNMENT CCOMPONENT SIDE VIEW) | li1tlel3/4islel7 {sl O a8) | 1S) eb 1S | ok) oe %9 | o %9 | o %9 | o %/0 O O O Oo Oo P 2.090 [53.09] a oo oo oo oo J RM x~7s o o90 o ooo 00 0 o oo o o0 o ooo o0 0 oo o90 0 oo o o90 00o ~0o oo o o o.U[68 o.U8 o 98 o RoHS 2002/95/EC le | GRN +)/0RG -) 11 | GRN -)/ORG +) 10 | COMMON CT 9 RD+ 8 | RD- 7 TD+ 7 mF 7 61 TD n 2 0.145 [3.68] =| | 5_| NO PIN S a oS 4 NO PIN a pm 2,390 [60,71] }+} 3 VCile o fa W 2 [| VC36 au om 1 No PIN go CG 6 THE SHADED AREA ON THE CUSTOMER BOARD ARE UNUSED PIN LOCATIONS MUST BE RECOMMENDED TO BE CLEAR OFF ANY VIA HOLE OR REMOVED TO ENSURE 2KV ISOLATION. COMPONENT PAD. ORIGINATED BY DATE TITLE PART NO. / DRAWING NO. STANDARD DIM. [ ] METRIC DIM. AS REFERENCE -17- 2X4 10/100 MagJack LIU QIN 04-17-09 PoE; WITH LED 08642X4R55-F IN INCH UNIT : INCH [mm]|REV.: A bel DRAWN BY DATE 0864-2X4R-55-F FILE NAME x SCALE : N/A SIZE: A4 | comrommrscs/, XIAN JIAXIN 04-17-09 PATENTED 08642X4R55-F_ADWG [Sa Tona | -@--=- [race 4) =e DC002(2)032305 This document is electronically generated. This is a controlled copy if used internallyTHE INFORMATION CONTAINED HEREIN IS CONSIDERED PROPRIETARY TO BEL FUSE INC. AND SHALL NOT BE COPIED, REPRODUCED OR DISCLOSED WITHOUT THE WRITTEN APPROVAL OF BEL FUSE INC. RoHS 2002/95/EC 2.005 [50,93] < a 1.455 36.96] 0.905 [22.99] 0.160 [4.06] _ _ _ 0.290 L7.37] 0,050 [1.27] 20.040+0.005 [ #1.02+0.13 ] 0.095 [2.41] 16 PLACE FOR LED LEADS 4 0,062 v7] 0,035+0,005 90,89+0.13 xe re of So 0.000 [ 013 | 4 [go $ + + e+ 96 PLACES FOR SIGNAL LEADS \ Oe o q a 1 7 tH 4 go ot t o % % 2% r | +, , 6 , 9 e, 0.450 j ft [11,43] i ip --1 @ $t aN aco \ 20,030 \ 2X 90128 [93,25] ot DAO mn in oo No ' ma TOS RLN SRA H [RO761 RY 0.110 [2,791 eOndogo ce s os wu 2 oF 2% 828 8 - Recommended PCB front edge 2 he = ay aoa 9 0290 [7.37] \ cutout. The kottom shield ground oo eo 2 ee! Le tabs (front) should not be seated 0.110 [2.79] on the top of the PCB. -w 2,100 [53,34] _Y SUGGESTED FOOTPRINT CCOMPONENT SIDE VIEW) ORIGINATED BY DATE PART NO. / DRAWING NO. STANDARD DIM [ ] METRIC DIM. AS REFERENCE 2X4 10/100 MagJack , LIU QIN 04-17-09 PoE; WITH ep 08642X4R55-F TOL. IN INCH uy; incH Immj|nev.: a | sOeT DRAWN BY DATE 0864-2X4R-55_F FILE NAME = SCALE: N/A _|SIZE : Ad | comroumma/, XIAN JIAXIN 04-17-09 PATENTED 08642X4RS5-F_A.DWG FS3 anos 6)--==}+- | pace: 5 early DC002(2)032305 This document is electronically generated. This is a controlled copy if used internallyTHE INFORMATION CONTAINED HEREIN IS CONSIDERED PROPRIETARY TO BEL FUSE INC. AND SHALL NOT BE COPIED, REPRODUCED OR DISCLOSED WITHOUT THE WRITTEN APPROVAL OF BEL FUSE INC. SUGGESTED PANEL OPENING 2.360 METAL PANEL al $s | [59,94] 0,080 [2.03] 42 1,035 [26.29] 1,020 [25,91] 4 PCB NOTES: THE DISTANCE OF PANEL INSIDE SURFACE RELATIVE TO FRONT SURFACE OF PART IS UNLY A SUGGESTION. IN CASE THIS DISTANCE IS DIFFERENT, THE REQUIRED PANEL OPENING DIMENSIONS CHANGE ACCORDINGLY. PACKING INFORMATION PACKING TRAY : 0200-9999-E9 <TOP) 0200-9999-F8 BOTTOM PACKING QUANTITY : 20 PCS FINISHED GOODS PER TRAY 6 TRAYS (20 PCS FINISHED GOODS) PER CARTON BOX NOTE +: CARDBOARDS ARE PLACED BETWEEN LAYERS OF PACKING TRAY INSIDE CARTON BUX CINCLUDE THE UPPERMOST AND LOWERMOST TRAY) RoHS 200295/EC ORIGINATED BY DATE TITLE 2X4 10/100 M J PART NO. / DRAWING NO. STANDARD DIM. [ ] METRIC DIM. AS REFERENCE 17- Aagvac _ TOL. IN INCH LIU QIN 04-17-09 PoE, WITH LED 08642X4R55-F z UNIT : INCH [mm] bel DRAWN BY DATE 0864-2X4R-55-F FILE NAME x SCALE: N/A conponmnrs:n XIAN JIAXIN 04-17-09 PATENTED 08642X4R55-F _ADWG sxx | 20004 Oe rian? DC002(2)032305 This document is electronically generated. This is a controlled copy if used internally