4.0X0.8mm RIGHT ANGLE SMD CHIP LED LAMP ATTENTION P/N: KPJKA-4008VGC GREEN OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features z Description 4.0mmx0.8mm RIGHT ANGLE SMT LED, 1.4mm THICKNESS. z z z z z The Green source color devices are made with InGaN on SiC Light Emitting Diode. LOW POWER CONSUMPTION. Static electricity and surge damage the LEDS. WIDE VIEWING ANGLE. It is recommended to use a wrist band or IDEAL FOR BACKLIGHT AND INDICATOR. anti-electrostatic glove when handling the LEDs. VARIOUS COLORS AND LENS TYPES AVAILABLE. All devices, equipment and machinery must be electrically PACKAGE: 2000PCS / REEL. grounded. zRoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.008") unless otherwise noted. 3.Specifications are subject to change without notice. SPEC NO: DSAC0197 REV NO: V.4 DATE: NOV/12/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.LI PAGE: 1 OF 4 Selection Guide Part No. Dice KPJKA-4008VGC Iv (mcd) @ 20 mA Lens Type GREEN (InGaN) Viewing Angle Min. Typ. 21/2 70 200 90 WATER CLEAR Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device peak Peak Wavelength Green D Dominant Wavelength 1/2 Typ. Max. Units Test Conditions 520 nm IF=20mA Green 525 nm IF=20mA Spectral Line Half-width Green 38 nm IF=20mA C Capacitance Green 45 pF VF=0V;f=1MHz VF Forward Voltage Green 3.5 4.5 V IF=20mA IR Reverse Current Green 10 uA VR = 5V Absolute Maximum Ratings at TA=25C Parameter Green Units Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage -40C To +85C Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAC0197 REV NO: V.4 DATE: NOV/12/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.LI PAGE: 2 OF 4 Green KPJKA-4008VGC SPEC NO: DSAC0197 REV NO: V.4 DATE: NOV/12/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.LI PAGE: 3 OF 4 KPJKA-4008VGC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity/ luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAC0197 REV NO: V.4 DATE: NOV/12/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.LI PAGE: 4 OF 4