FR101 - Chenyi Electronics

CE FR101 THRU FR107

CHENYI ELECTRONICS FAST RECOVERY RECTIFIER

Reverse Voltage - 50 to 1000 Volts

Forward Current - 1.0Ampere

FEATURES

. Plastic package has Underwrites Laboratory

Flammability Classification 94V-0

. Fast switching speed

. Construction utilizes void-free molded plastic technique

. Low forward voltage drop,high efficiency

. High current capability

. High reliability

MECHANICAL DATA

. Case: JEDEC DO-41 molded plastic body

. Terminals: Plated axial leads,solderable per MIL-STD-750,method 2026

. Polarity: Color band denotes cathode end

. Mounting Position: Any

. Weight: 0.012 ounce, 0.33 gram

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

(Ratings at 25 ambient temperature unless otherwise specified,Single phase,half wave 60Hz,resistive or inductive)

load. For capacitive load,derate current by 20%)

Symbols FR101 FR102 FR103 FR104 FR105 FR106 FR107 Units

Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts

Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts

Maximum DC blocking voltage VDC 50 100 200 400 600 800 100 Volts

Macimum average forward rectified

current 0.375"(9.5mm)lead length at TA=75

Peak forward surge current 8.3ms

sing-wave superimposed on rated load

(JEDEC method)

Maximum instantaneous forward voltage at 1.0 A VFVolts

Maximum full load reverse current full cycle

average. 0.375"(9.5mm)lead length at

TL=55

Maximum reverse recovery time(Note 1) Trr 250 ns

Typical junction Capacitance(Note 2) CJpF

Notes: 1.Test conditions:IF=0.5A,IR=1.0A,Irr=0.25A.

2.Measured at 1MHz and applied reverse voltage of 4.0V Volts

I(AV) Amp

IFSM Amps

1.0

30.0

Operating and storage temperature range TJ TSTG

blocking voltage

Maximum DC Rreverse Current at rated DC

15.0

-65 to +150

1.3

5.0

100

150 500

CE FR101 THRU FR107

CHENYI ELECTRONICS FAST RECOVERY RECTIFIER

Reverse Voltage - 50 to 1000 Volts

Forward Current - 1.0Amperes

RATINGS AND CHARACTERISTIC CURVES FR101 THRU FR107

FLG.1-TYPICAL FORWARD CURRENT FIG.2-MAXIMUM NON-REPETITIVE

DERATING CURVE FORWARD SURGE CURRENT

FIG.3-TYPICAL INSTANTANEOUS FORWARD

CHARACTERISTICS FIG.4-TYPICAL REVERSE CHARACTERISTICS

FIG.6-TEST CIRCUIT DIAGRAM AND REVERSE

FIG.5-TYPICAL JUNCTION CAPACITANCE RECOVERY TIME CHARACTERISIC